Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacture of Qualified Electrical Connector Covers

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits the manufacture and delivery of two units of military-spec electrical connector covers identified by NSN 5935-01-134-3589 and part number MS27511F8C, which must fully comply with the MIL-DTL-38999N and MS27511L technical specifications and be listed on the Qualified Products List for FSC 5935. These components are critical for defense applications and require strict adherence to military standards for performance, durability, and environmental resilience. The work is to be performed in Yuma, Arizona, with a delivery deadline tied to the contract’s response deadline of July 27, 2026, and the solicitation was posted on July 16, 2026, under a subcontract classification. The contracting activity falls under the Department of Defense, specifically the Active Devices Division, and the NAICS code 332313 indicates the work involves the manufacture of electrical equipment and components. All proposals must meet qualification requirements and be submitted through the official DIBBS portal prior to the stated deadline.

General Info

Manufacture and deliver two military-spec connector covers to MIL-DTL-38999N standards by July 27, 2026, in Yuma, Arizona.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

332313 - Plate Work ManufacturingView NAICS

Place of Performance

YUMA, AZ, 85365, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 2 units of military-spec electrical connector covers (NSN: 5935-01-134-3589, Part Number: MS27511F8C) compliant with MIL-DTL-38999N and MS27511L, listed on QPL for FSC 5935.

Similar Contracts

Same NAICS industry code

Fastener Supply – Hex Nuts (NSN: 5310010902128)The contract calls for the supply of 66 plain hexagon nuts identified by NSN 5310010902128, manufactured to comply with federal and military specifications to ensure suitability for defense and government applications. The order is structured as a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, with performance required at the specified location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation, posted on July 16, 2026, requires responses to be submitted by July 24, 2026, and is classified under NAICS code 332313, indicating it pertains to the manufacturing of screw, bolt, and nut fasteners. The procurement is part of a broader logistical effort to maintain standardized fastener inventories for military use, with all units expected to meet rigorous quality and compatibility standards without exceptions or deviations.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hex Cap Screw Supply (NSN 5305014474398)The contract entails the manufacture or supply of Hex Cap Screws identified by NSN 5305014474398, requiring full compliance with military specifications for material, dimensional tolerances, finish, and performance. The supplier must ensure proper packaging and labeling in accordance with defense logistics standards, including traceability and documentation required for military inventory systems. Deliveries are to be directed through Defense Logistics Agency channels, with the place of performance listed as FPO, ZIP 09524, indicating overseas or military postal delivery requirements. The contract is structured as a subcontract under NAICS code 332313 for small arms, ordnance, and ordnance accessories manufacturing, managed by the ASC Commodities Division of the Department of Defense. The solicitation is open with a response deadline of July 24, 2026, and was posted on July 16, 2026, giving interested parties approximately eight days to prepare and submit bids. While no set-aside designation is specified, the procurement is part of a broader effort to maintain readiness by securing critical fastener components for defense applications. Although no point of contact details are provided, the official solicitation information can be accessed via the DIBBS portal at the referenced link, where full technical and compliance requirements are likely detailed. Contractors must meet stringent military quality control standards and demonstrate capacity for consistent, timely delivery to support operational needs.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Fastener Supply – Solid Rivets (NSN: 5320-00-806-3550)The contract entails the supply of solid rivets identified by part number BACR15ADD7-7 and national stock number 5320-00-806-3550, with a total weight requirement ranging between 116.100 and 141.900 pounds. All rivets must be manufactured or sourced in strict adherence to military specifications, ensuring dimensional accuracy, material integrity, and performance standards mandated for defense applications. Complete supply chain traceability is required from raw material source through final assembly, guaranteeing authenticity and compliance with quality assurance protocols. Packaging and labeling must conform to applicable military and federal standards to ensure proper handling, storage, and identification throughout logistics and deployment. The procurement is designated as a subcontract under the NAICS code 332313, managed by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 16, 2026, and the performance location and point of contact are not specified in the available data.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Supplemental Small Arms ArmorThe contract seeks the manufacture or supply of military-grade supplemental armor for small arms, adhering to stringent hazardous materials standards, MIL-STD-129 labeling requirements, and DLA packaging specifications to ensure compatibility with Department of Defense logistics systems. The armor must meet operational durability and safety criteria expected for frontline military use, with all deliveries bound by strict compliance protocols that govern handling, transport, and documentation. Issued under the NAICS code 332313, this subcontract falls under the purview of the LSO Combat Vehicles and Armament organization within the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a deadline for responses set for July 27, 2026. The posting date of July 16, 2026, provides a compressed eleven-day window for qualified suppliers to submit proposals, emphasizing urgency and precision in meeting technical and regulatory obligations. All submissions must align with DLA’s packaging and marking standards to facilitate seamless integration into existing supply chains.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Plain Hexagon Nuts (NSN 5310014297239)The contract entails the procurement and delivery of thirty commercial off-the-shelf plain hexagon nuts identified by National Stock Number 5310014297239, with all units requiring full military logistics marking to ensure compliance with defense supply standards. Delivery is to be completed on a FOB Destination basis to Gulfport, Mississippi, meaning the supplier assumes responsibility for transportation costs and risks until goods arrive at the specified location. This requirement underscores the importance of traceability and adherence to federal military logistics protocols throughout the supply chain. The contract falls under NAICS code 332313, which classifies the manufacturing of forged and stamped metal products, indicating that the supplier is expected to be a qualified manufacturer or authorized distributor of defense-compliant fasteners. Issued by the Defense Logistics Agency under the Department of Defense, this subcontract supports the broader mission of maintaining reliable access to standardized, high-quality hardware for military operations. The absence of a solicitation number and specific point of contact suggests this transaction was managed internally or through existing contractual frameworks. The posting date of July 16, 2026, indicates a future procurement timeline, and the referenced DIBBS link provides the official record for tracking award status and delivery confirmation. All units must meet exact military specifications to ensure interoperability and safety within defense systems, and failure to comply with marking or delivery terms may result in rejection or contractual remedies.

Defense Logistics Agency

POSTED

DEADLINE

Hex Cap Screw Supply (NSN 5305015287654)The contract requires the supply of eight units of hexagon head cap screws designated by NSN 5305015287654, manufactured and delivered in full compliance with military specifications governing material, dimensional accuracy, finish, and performance standards. All components must adhere to strict packaging and labeling protocols to ensure traceability, compatibility with defense logistics systems, and readiness for immediate integration into naval operations at Puget Sound Naval Shipyard in Bremerton, Washington. The delivery must be completed by the response deadline of July 24, 2026, with full alignment to defense supply chain protocols including documentation, inspection readiness, and adherence to the applicable NAICS code 332313 for machine shop fabrication services. This subcontract is issued under the Department of Defense through the Maritime Supply Chain ESOC Buys office, with no set-aside provisions specified, indicating competition is open to all eligible suppliers. The solicitation remains active until the response deadline, after which evaluations will proceed based on compliance, cost, and delivery timelines. Successful bidders must ensure all items meet the exact military standards for hex cap screws, with no tolerance for deviation in specification or documentation. The place of performance is fixed at the shipyard location, requiring the supplier to account for transport logistics, handling requirements, and any additional delivery conditions mandated by the naval facility.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Flat Washer Supply (NSN 5310009388387)The contract calls for the supply of flat washers identified by NSN 5310009388387, with quantities specified across three contract line item numbers: 25,000 units, 26,000 units, and 37,000 units respectively. All items must fully comply with military standards for packaging, marking, and preservation to ensure readiness and compatibility with Defense Department logistics systems. The solicitation is issued under a subcontract arrangement by the Nuclear Reactor Program, a division of the Department of Defense, and is tied to performance at Cherry Point, North Carolina, with the zip code 28533-5040. The North American Industry Classification System code 332313 confirms the scope is within the manufacturing of screw, bolt, and other fastener products. The opportunity was posted on July 16, 2026, with responses due by July 27, 2026, and the full details are accessible through the DIBBS portal under solicitation reference SPE7M226T5652.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Manufacture and Supply of Access Covers (NSN 5340-01-083-7281)The contract entails the manufacture and delivery of twelve metal access covers identified by NSN 5340-01-083-7281, specifically designed for critical application use and requiring full compliance with military packaging, labeling, and material safety standards. The work must be performed to meet stringent defense requirements, ensuring the components are suitable for operational environments where reliability and conformity are paramount. The contract is structured as a subcontract under the NAICS code 332313, indicating it falls within the category of architectural and structural metals manufacturing. All items must be delivered to the designated place of performance in Tracy, California, with a zip code of 95304-5000, and must adhere to all applicable DoD specifications for handling, documentation, and quality assurance. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, providing interested parties with a limited window to submit proposals. The contracting activity is managed under the Land Supply Chain organization within the Department of Defense, emphasizing this is part of a larger military logistics and supply network. Although the specific point of contact and set-aside classification are not provided, the explicit requirement for compliance with military standards underscores that only qualified suppliers with proven experience in defense-grade fabrication are likely to be considered. The contract is accessible via the official DIBBS platform, and participation requires strict adherence to the listed technical and procedural guidelines to ensure eligibility and timely fulfillment.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Lock Washer Manufacturing and SupplyThe contract requires the manufacture and delivery of 141 lock washers to meet strict military specifications, including MIL-STD-129 for labeling and packaging and ASTM D3951 for commercial packaging standards, with absolute adherence to zero-defect quality requirements. All work must be performed to ensure each component conforms to the rigorous technical and inspection standards mandated by the Department of Defense, with a strong emphasis on consistency, durability, and reliability under operational conditions. The place of performance is designated as Tracy, California, with the final delivery point subject to the procurement guidelines outlined in the solicitation. Subcontracted under the NAICS code 332313, the opportunity is managed by the ASC Commodities Division of the Department of Defense, with a response deadline of July 24, 2026, and a posted date of July 16, 2026. Bidders must be prepared to fulfill the full scope of work, including proper documentation, packaging, labeling, and tracking in compliance with federal supply chain protocols. The contract is not subject to any specific set-aside designation, open to all qualified subcontractors capable of meeting the defined technical and quality benchmarks.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Mending Plate (Hardware Component)The contract entails the procurement and delivery of one mending plate, identified by National Stock Number 5340012701800, a standardized hardware component designed for structural or mechanical joining applications. The item must be supplied in new condition, packaged in its original manufacturer’s packaging, and fully compliant with federal supply standards to ensure interoperability and quality across Defense Logistics Agency requirements. The procurement is classified as a subcontract under NAICS code 332313, indicating it falls within the scope of architectural and structural metal manufacturing. The contract is managed by the Department of Defense through the Defense Logistics Agency, with no specific set-aside designation or location details provided. Delivery terms, performance location, and point of contact information are not specified in the available data, but the contract is linked to an active award record under reference SPE7LX26FB543 and is publicly accessible via the DIBBS system.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Welded Steel Studs to Military SpecificationsThe contract requires the manufacture and delivery of three units of welded steel studs adhering strictly to MIL-S-24149C/D specifications, ensuring compliance with military performance and quality standards. Each unit must be packaged in accordance with MIL-STD-129, which includes proper labeling, marking, and documentation for military logistical handling, alongside full adherence to hazard communication requirements to ensure safe handling, storage, and transport of the materials. The work is being procured as a subcontract under the Department of Defense, specifically by the ASC Commodities Division, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is classified under NAICS code 332313, indicating it pertains to forging and stamping operations. The offer deadline is set for July 24, 2026, and all responses must be submitted through the designated DIBBS platform to be considered valid.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

COVER, ELECTRICAL COThe contract solicitation SPE7M5-26-T-297X requires the procurement of three electrical connector covers, identified by NSN 5935-00-070-9484 and part numbers issued by RoFlan Associates Inc and Brantner and Associates Inc, with delivery required within 147 days of award to the Defense Logistics Agency Distribution facility in New Cumberland, Pennsylvania. The item must comply with strict environmental and safety regulations, including a complete prohibition on the use of Class I ozone-depleting substances in any phase of manufacturing, design, or cleaning unless prior written approval is obtained from the Contracting Officer, and a strict ban on mercury or mercury-containing compounds in all hardware and supplies, with limited exceptions for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, and NAVSEA-approved chemical reagents. Packaging and preservation must conform to MIL-STD-2073-1E and MIL-DTL-55330 for connectors, with all preservation, packaging, and marking materials explicitly prohibited from containing mercury or mercury compounds. Marking of units must adhere to MIL-STD-129 with zero special marking code, and the item must be shipped FOB origin with no variance allowed in the quantity of three units delivered. Inspection and acceptance occur at destination, requiring the contractor to employ zero-based sampling methods per MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels of VII, IV, and II respectively, and zero non-conformances mandated unless otherwise negotiated. The contract includes a full suite of DFARS and FAR clauses covering cybersecurity, safeguarding of covered defense information, trafficking in persons, employment eligibility, sustainable products, hazardous material identification, and control of government personnel work products, with additional requirements for flow-down of ocean transportation restrictions and whistleblower protections to subcontractors. Offerors must possess a valid UEI and CAGE code, represent their small business status if applicable, and submit electronic quotations exclusively via the DIBBS portal by July 21, 2026, under a likely Lowest Price Technically Acceptable award methodology with no award price details fully populated in the solicitation.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Transportation and Delivery LogisticsThe contract pertains to the transportation and delivery of packaged goods to DLA Distribution San Joaquin located in Tracy, California, with a zip code of 95304-5000. It is classified as a subcontract under NAICS code 484220, which corresponds to truck transportation of freight and related services. The solicitation was posted on July 17, 2026, with responses due by July 31, 2026, and is managed by the Active Devices Division under the Department of Defense. All services must adhere strictly to established delivery protocols and invoicing procedures to ensure proper documentation and payment. The performance location is clearly defined, and the contractor is expected to meet all logistical requirements for timely, secure, and compliant transport of goods to the specified facility.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires the provision of military-standard packaging and marking services fully compliant with Defense Logistics Agency requirements for the shipment of defense-related materials. All packaging and labeling must adhere to stringent government specifications to ensure safe, traceable, and standardized transport across military supply chains, with performance specifically designated at Tracy, California, with a ZIP code of 95304-5000. The work is classified as a subcontract under NAICS code 561910, indicating it falls within the other support services category, and the awarding entity is the Active Devices Division of the Department of Defense. The solicitation was posted on July 17, 2026, with responses due by July 31, 2026, and all contractors must be prepared to meet exacting DLA standards for durability, identification, and documentation during packaging and marking processes.

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

Electrical Connector Supply (NSN 5935-12-419-2729)The contract calls for the supply of eleven units of an electrical connector identified by NSN 5935-12-419-2729, which must meet all applicable MIL-SPEC standards for performance, durability, and environmental resilience. Each unit requires specific packaging and marking protocols to ensure traceability, compliance with military logistics standards, and readiness for immediate deployment. The product must be domestically produced, with all components and assembly originating in the United States to satisfy federal sourcing requirements. The place of performance is designated as Tracy, California, with delivery expected to meet the contractual timeline and quality assurance parameters outlined by the Department of Defense. This subcontract, issued under NAICS code 335313 for electrical component manufacturing, was posted on July 17, 2026, with a firm response deadline of July 31, 2026. The contracting activity is managed by the Active Devices Division of the Department of Defense, indicating direct relevance to defense systems and equipment. Bidders must demonstrate full compliance with military specifications and provide documentation proving domestic origin, packaging conformity, and adherence to federal procurement guidelines. Failure to meet any of these criteria will result in non-compliance, regardless of cost or technical merit.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

Electrical Connector Backshell ManufacturingThe contract requires the manufacture and supply of 174 electrical connector backshells designated as NSN 5935-01-244-4704 with part number M85049/60-2G20W, fully compliant with SAE AS85049/60 and AS85049F technical standards, and qualified on the Qualified Products List for Federal Supply Class 5935. All units must meet stringent military specifications for performance, durability, and interchangeability, ensuring compatibility with existing defense systems. The work is classified as a subcontract under NAICS code 334417, indicating the focus on other electrical component and equipment manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 31, 2026, and the place of performance is specified as Jacksonville, Florida, 32212-0103. The contracting activity falls under the Active Devices Division of the Department of Defense, reflecting the military nature of the requirement. Bidders must be prepared to demonstrate production capability, quality assurance, and adherence to all applicable defense standards, including QPL qualification, to be considered eligible for award. The contract seeks a reliable, qualified supplier capable of delivering certified components on schedule to support ongoing defense infrastructure needs.

Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

POSTED

about 16 hours ago

DEADLINE

RESISTOR, FIXED, WIREThe contract is for a single fixed wire resistor identified by NSN 5905-01-093-9439 and part number 0811-0595 from Keysight Technologies Inc, with a required delivery of one unit within 20 days of contract award. Delivery is FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, and marking must adhere to MIL-STD-129 with a unit pack code of U and no special preservation or packaging materials specified. The resistor’s lead finish must be marked per IPC/JEDEC J-STD-609, requiring specific lead content identification on each unit package, with placement governed by the standard’s guidelines. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with revisions dictated by the solicitation or award date depending on acquisition size. All shipments must be sent via the fastest traceable means, excluding parcel post, to Fort Bliss, Texas, under the RDD 777 shipment code, with the government’s point of contact provided for inquiries. The procurement is part of a larger solicitation, SPE7M5-26-T-302E, with a response deadline in July 2026 and an original required delivery date of July 1, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 16 hours ago

DEADLINE

BASE, MASTThe contract pertains to the procurement of a single unit identified by NSN 5985-01-687-0214 under solicitation SPE7M5-26-T-302K, with a required delivery within 20 days after award. The solicitation is open to full and open competition and is governed by stringent cybersecurity and quality standards, including mandatory CMMC Level 2 certification for any third-party assessment organization involved. The requirement encompasses compliance with export control regulations under ITAR or EAR, restricting technical data access to entities with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal authorization from DLA. Additional quality and procedural mandates apply, including inspection and acceptance at origin, removal of government identification from non-accepted items, adherence to DLA packaging specifications, and compliance with tailored higher-level quality requirements regardless of whether the supplier is a manufacturer or non-manufacturer. Technical and quality specifications referenced are drawn from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date. The contract is managed by the Department of Defense’s Active Devices Division, with performance expected at Fort Stewart, Georgia, and the technical data subject to strict handling protocols under DFARS 252.225-7048. All bidders must ensure that any access or disclosure of controlled technical data, including to foreign nationals regardless of location, is pre-approved and legally compliant. The point of contact for inquiries is Matthew Stanko, reachable via email and phone provided, and the solicitation window closes on July 22, 2026, with responses due by that deadline. Participation requires strict adherence to all referenced DLA directives, export control obligations, and cybersecurity maturity standards, making this a high-compliance procurement with limited eligible respondents due to the specialized nature of the requirements and data sensitivity.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRIThe contract specifies the procurement of 11 electrical plug connectors with NSN 5935-12-419-2729 under solicitation SPE7M5-26-Q-0734, with a firm fixed price and no variance allowed in quantity. Delivery is required 132 days after award, with FOB origin and inspection and acceptance occurring at the destination facility in Tracy, California. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, unit containers, and intermediate packaging, with marking strictly adhering to MIL-STD-129 and no special marking codes applied. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issuance or award date controlling, depending on the acquisition type. All governmental identification must be removed from non-accepted supplies, and physical identification of the bare item must be marked per RQ017. The item is sourced from BINDER FRANZ GMBH CO under part number 99 1492 992 12, and transportation logistics follow DLA procedural notes C19 and C20. The purchasing request is 7017385211, with a mandatory ship date of January 16, 2027. Contact for inquiries is Andrew Bracken at the Active Devices Division of the Department of Defense.

Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

FUSEHOLDER, BLOCKThe contract specifies the procurement of one fuseholder, block with NSN 5920-01-525-6396 and part number 4001.0201 from HENNY PENNY CORP, under solicitation SPE7M5-26-T-294B, with a required delivery date of June 8, 2026, and a 20-day delivery window. The item must be delivered FOB destination with no tolerance for quantity variance, inspected and accepted at the destination, and packaged according to DLA’s packaging requirements, prioritizing the DLA Master List of Technical and Quality Requirements over ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and if hazardous under FED-STD-313, must meet TQ requirement IP025; otherwise, it must be commercially packaged. Palletization must follow RP001, and cybersecurity compliance requires a CMMC Level 2 self-assessment. The delivery address is the USS NEW ORLEANS LPD 18 at FPO AP 96673, with transportation details governed by DLAD PROC NOTES C19 and C20. The contract includes government-only data for tracking and is tied to project LE5 TP 2, with the supplier required to use the VSM system for RDD 777 shipments. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List, and the revision in effect at the award date controls for this simplified acquisition.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

BACKSHELL, ELECTRICAL CThis contract specifies the procurement of 174 units of a backsheat for electrical connectors with NSN 5935-01-244-4704, under solicitation SPE7M5-26-Q-0735, with a firm fixed price structure and no variance allowed in quantity. The item is a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, and must adhere to the technical and quality standards referenced in the DLA Master List, including SAE AS85049F Revision F dated April 1, 2021, and TDP Rev A Gen 2. The product is designated as a critical application item and must not contain intentional mercury or mercury-containing compounds, except for specific exempted uses such as functional batteries or instruments, with portable fluorescent lamps and instruments requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with preservation and packaging conforming to MIL-DTL-55330 for connectors. The item is to be shipped origin FOB with delivery required within 90 days after award, and inspection and acceptance occur at the destination. The designated delivery point is DLA Distribution Jacksonville, with special handling instructions for hazardous materials per IP025 and transportation guidelines outlined in DLAD Proc Notes C19 and C20. All government identification must be removed from non-accepted supplies, and no special marking beyond the baseline requirements is mandated. The contract is issued under DoD unit of issue standards with a procurement request number 7017440241 and a required ship date of December 18, 2026.

Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

CONNECTOR, RECEPTACLThe contract pertains to the procurement of a connector, receptacle with NSN 5935-01-085-9045 and part number JT04D28-21P-MC2, requiring exactly three units to be delivered within 124 days of the award date, with delivery terms set at FOB origin. The item is designated as a critical application component and is governed by a source-controlled drawing that restricts approval to the cited manufacturer unless otherwise qualified through the cognizant design activity. All technical and quality requirements are derived from the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must conform strictly to DLA’s RP001 requirements and MIL-STD-129 labeling, with hazardous material handling dictated by FED-STD-313 and TQ requirement IP025 if applicable. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination point, and no quantity variance is permitted. The solicitation number is SPE7M5-26-T-302X, with a response deadline in July 2026, and the procurement is under NAICS code 334417, managed by the Department of Defense’s Active Devices Division, with Tate Shannon listed as the primary point of contact.

Electronic Connector Manufacturing

POSTED

about 16 hours ago

DEADLINE

RELAY ASSEMBLYThis contract pertains to the procurement of a single relay assembly identified by NSN 5945-01-572-7948 and part number 8100-3515-0182, with a required delivery of one unit within 161 days from the contract award. The item must be furnished in strict compliance with DLA packaging standards specified in MIL-STD-2073-1E, including packaging method 41, dry preservation, use of corrosion-inhibiting wrap material, and unit packaging marked as E5 with OPI notation. Marking requirements follow MIL-STD-129, with no special markings required, and palletization must adhere to DLA packaging guidelines. The contractor must apply lead-free component markings in accordance with IPC/JEDEC J-STD-609 on each individual unit pack, properly positioned as per the standard’s specifications, to identify lead content status. Mercury and mercury-containing compounds are prohibited from direct or intentional contact with the hardware, except for specified approved applications such as certain batteries, fluorescent lamps, sensors, weapon systems, or chemicals authorized by NAVSEA, and any portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Delivery is FOB origin to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract enforces a zero variance in quantity, and the required delivery date is January 24, 2027, with a need ship date of December 15, 2026. All technical and quality requirements not explicitly detailed herein are incorporated by reference from the DLA Master List of Technical and Quality Requirements.

Relay and Industrial Control Manufacturing

POSTED

about 16 hours ago

DEADLINE