Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacture of Vehicular Seat Cushions

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the full production of 54,000 vehicular seat cushions, encompassing every phase from initial design and fabrication through rigorous quality control, proper packaging, and timely delivery, all in strict compliance with military standards. The project is scoped as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, and it is classified under NAICS code 336360, which pertains to motor vehicle parts manufacturing. The work must be completed and delivered to Robins AFB, Georgia, with a response deadline of August 3, 2026, and the solicitation was posted on July 23, 2026. The awarding authority is the Department of Defense through LSO Combat Vehicles and Armament, and all deliverables must adhere to the stringent specifications required for military-grade vehicular equipment to ensure operational reliability and safety.

General Info

Produce and deliver 54,000 military-grade seat cushions to Robins AFB by August 3, 2026, under small business set-aside.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

336360 - Motor Vehicle Seating and Interior Trim ManufacturingView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full production of 54,000 vehicular seat cushions including design, fabrication, quality control, packaging, and delivery in compliance with military standards.

Similar Contracts

Same NAICS industry code

CUSHION, SEAT, VEHICULARThe contract pertains to the procurement of vehicular seat cushions, identified by NSN 2540015034104 and part numbers 177909HN303 and 5KK656, under solicitation SPE7LX-26-U-8770. This is a Service-Disabled Veteran-Owned Small Business Set-Aside for an indefinite-delivery contract managed by the Strategic Acquisition Program Directorate of the Department of Defense, with an estimated quantity of 833 units. The delivery timeline is 81 days after order issuance, with FOB origin terms applying and zero variance permitted in quantity. Inspection and acceptance occur at the destination point, governed by FAR 52.246-2, and packaging must conform to MIL-STD-2073-1E with packaging code Q and packing level B. Marking follows MIL-STD-129 with no special markings required, and palletization adheres to DLA’s RP001 packaging requirements. The product is prohibited from containing Class I ozone-depleting chemicals, and substitute chemicals require prior approval unless explicitly authorized by specifications. Compliance with technical and quality standards is stipulated through incorporation of the DLA Master List of Technical and Quality Requirements, and cybersecurity obligations are enforced via clauses such as 252.204-7012 and 252.240-7997, mandating NIST SP 800-171 controls and cyber incident reporting. Contractors must also comply with restrictions on covered defense telecommunications equipment, whistleblower rights notification, and prohibitions against hexavalent chromium and hazardous material handling. Payment must be processed electronically through WAWF, and invoicing adheres to DFARS guidelines. Eligibility requires valid UEI and CAGE codes, with small business status and socioeconomic representations verified at award. The contract includes clauses addressing employment equity, trafficking in persons, accelerated payments to small business subcontractors, and limitations on unauthorized obligations. While the unit price is not specified, the estimated contract value is not binding under the indefinite-delivery framework, and no option quantities are defined. The solicitation closed on July 29, 2026, and all responses were required via the DIBBS portal.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Center Console and Interior Control Systems InstallationThe contract mandates the custom fabrication, supply, and installation of center control consoles within patrol vehicles, integrating essential components such as radios, data terminals, weapon mounts, and operational switches. These consoles must be engineered to meet precise operational standards for durability, accessibility, and functionality in law enforcement or public safety environments, ensuring seamless system interoperability and reliable performance under field conditions. The work involves full lifecycle support from design and manufacturing through final installation and verification, with all components requiring strict adherence to technical specifications and safety requirements. This is a small business set-aside subcontract under NAICS code 336360, exclusively reserved for small business concerns as defined by the SBA under FAR 19.5, with the Department of the Interior, through Sat Team 2 Fws, acting as the contracting entity. The solicitation was posted on July 24, 2026, with responses due by August 7, 2026, and the work is to be performed at unspecified locations, although performance is expected to occur across the agency’s patrol vehicle deployment regions. All proposals must demonstrate proven experience in vehicular integrated system fabrication and meet the regulatory and compliance benchmarks for federal subcontracting under a total small business set-aside.

POSTED

DEADLINE

Custom Floor Mat Manufacturing for Tahoe VehiclesThe contract involves the production of custom front and rear floor mats specifically designed for Chevrolet Tahoe vehicles under model SM71224, intended for durable indoor and outdoor use by fleet operators. These floor mats are engineered to meet the rigorous demands of military and government fleet environments, prioritizing resilience, ease of cleaning, and long-term performance under varied weather and terrain conditions. The work is classified under NAICS code 336360, which pertains to automotive interior trim manufacturing, indicating the specialized nature of the product’s development and production process. The solicitation is structured as a subcontract opportunity posted by W4LD USA Hecsa under the Department of Defense, with a response deadline of July 31, 2026. All submissions must be prepared to meet stringent quality, durability, and delivery requirements aligned with federal fleet standards. While no set-aside designation is specified, the contract is positioned for qualified suppliers capable of scaling production while maintaining consistency in design and material specifications. The place of performance and point of contact details are not provided, but all inquiries and proposals must be submitted through the official SAM.gov portal linked in the posting.

POSTED

DEADLINE

Custom Seat Cover Manufacturing for Tahoe VehiclesThe contract involves the manufacture of custom front and rear seat covers specifically designed for Chevrolet Tahoe vehicles, identified by model number 91026, to equip government fleet units. The work is classified as a subcontract under NAICS code 336360, which pertains to motor vehicle body and trailer manufacturing, indicating the specialized nature of the component production. The project is sponsored by the Department of Defense through its contracting entity W4LD USA Hecsa, with all manufactured seat covers intended for official federal use, necessitating compliance with government standards for durability, safety, and compatibility with vehicle specifications. Submission of proposals must be completed by July 31, 2026, at 7:00 PM Eastern Time, with the opportunity posted on July 24, 2026. The place of performance and exact office location are not specified, but fulfillment will directly support Department of Defense fleet operations. The contract does not include a set-aside designation, meaning it is open to all eligible contractors without preference for small businesses or other categories. All bidders are expected to meet the technical, quality, and delivery requirements necessary for military and government vehicle applications.

POSTED

DEADLINE

Mats for the INTAC Program OfficeThe U.S. government is conducting a market survey under solicitation number W912HQ26S0049 to gather information from vendors capable of supplying mats for the INTAC Program Office, targeting companies with NAICS code 336360 for Motor Vehicle Seating and Interior Trim Manufacturing. This is not a solicitation for quotes or a binding commitment but a preliminary effort to evaluate industry capabilities and gather feedback on the draft Statement of Work. Interested parties must provide their organization name, location, CAGE Code, socioeconomic status, assessment of their ability to perform a contract of this scope, and commentary on the draft requirements. Responses are required by 3:00 PM EST on Thursday, July 31, 2026, and must be submitted via email to both Gregory Booker and Giorgiana Chen. Questions must be submitted no later than 3:00 PM EST on July 27, 2026. The contract, if awarded, is anticipated to be a Firm Fixed Price arrangement under the simplified acquisition threshold, with no financial obligation or award resulting from this survey. The government reserves the right to disregard any input received and will not notify respondents of the outcomes.

POSTED

DEADLINE

Starter Motor Manufacturing or SupplyThe contract seeks the supply of a starter motor with NSN 6110014537193, manufactured or sourced to meet detailed technical specifications established by the Defense Logistics Agency, encompassing rigorous standards for quality, packaging, and labeling. The requirement is part of a subcontract under the NAICS code 336360, and the item must be delivered to the designated place of performance at FPO with ZIP code 09554, adhering to all Department of Defense logistics and compliance protocols. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and is managed by the Maritime Supply Chain under the broader oversight of the Department of Defense. All parties must ensure complete adherence to technical and regulatory requirements to satisfy contract obligations.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Commander’s Seat Cushion AssemblyThe contract calls for the production and assembly of 150 specialized commander’s seat cushion units designed to meet stringent military performance standards, with emphasis on precision fit, long-term durability, and operational reliability in combat environments. These units must be manufactured to exact specifications ensuring compatibility with existing armored vehicle seating systems, and all components must undergo rigorous quality control to ensure consistent performance under extreme conditions. The work is designated as a Total Small Business Set-Aside under the SBA program, meaning only small businesses qualify to respond, in alignment with FAR 19.5 regulations governing federal procurement priorities. The solicitation, issued under NAICS code 336360 for Aircraft and Parts Manufacturing, is managed by the LSO Combat Vehicles and Armament office within the Department of Defense. Responses are due by August 3, 2026, with the performance location centered at Robins Air Force Base, Georgia, ZIP 31098-1887. Although no point of contact is listed, interested parties must submit proposals through the official DIBBS portal linked in the posting. The subcontract nature of this requirement indicates that the selected vendor will be fulfilling a component of a larger defense systems integration effort, necessitating clear communication and adherence to military-grade manufacturing and documentation protocols.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Exhaust Muffler Supply and DeliveryThe contract concerns the supply, packaging, and delivery of exhaust mufflers identified by NSN 2990013928437 under delivery orders issued by the Defense Logistics Agency, with strict adherence to military packaging standards and hazardous material handling regulations. All items must meet exacting military specifications to ensure compatibility, safety, and durability in operational environments, with packaging designed to protect against damage during transit and storage while complying with all applicable DoD hazardous materials requirements. The solicitation is structured as a subcontract under the NAICS code 336360, indicating the industry classification for automobile exhaust system manufacturing, and is issued by the Strategic Acquisition Program Directorate within the Department of Defense. The opportunity was posted on July 23, 2026, with responses due by July 28, 2026, and all performance is expected to support federal delivery obligations without specification of a fixed location beyond general compliance with DoD logistical protocols. Interested parties must submit proposals through the DIBBS platform prior to the deadline to be considered for award.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Vehicular Mirror Heads (NSN 2540017068157)The contract is for the manufacture, sourcing, and delivery of vehicular mirror heads compliant with NSN 2540017068157, requiring full adherence to military packaging and labeling standards. All work must be performed by a small business as this is a total small business set-aside under FAR 19.5, with the NAICS code 336360 designating the industry as Other Transportation Equipment Manufacturing. Deliveries will be made against individual delivery orders issued under an Indefinite Delivery Contract, meaning exact quantities are not fixed at the time of award but will be specified as needed by the procuring entity. The solicitation was posted on July 23, 2026, with responses due by August 7, 2026, and the contracting activity falls under the Department of Defense, specifically the LSO Combat Vehicles and Armament office. Performance is expected to support U.S. military vehicle systems, and all products must meet exacting defense specifications for functionality and durability in operational environments.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Radiator Supply for Engine Cooling SystemsThe contract entails the supply of approximately eleven engine cooling radiators under an indefinite-delivery contract structure, where final quantities and delivery timelines will be determined through subsequent delivery orders. This arrangement provides flexibility for the government to adjust requirements based on operational needs without committing to specific volumes upfront. The solicitation falls under the NAICS code 336360, which classifies it as part of the automotive component manufacturing sector, indicating the technical specificity required for military-grade cooling systems. The award will be made under a subcontract type, suggesting the prime contractor may be sourcing these components from specialized suppliers to fulfill broader defense obligations. The opportunity was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. While no specific place of performance or point of contact is listed, the contract is accessible through the DIBBS platform, indicating it is part of the Department of Defense’s broader procurement ecosystem. There is no set-aside designation, meaning all eligible businesses may compete regardless of size or status. The absence of detailed address or contact information implies that further administrative details will be coordinated post-award through official channels tied to the solicitation number SPE7LX26U8679.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

HOOK, TOWThis contract pertains to the procurement of one unit of a HOOK, TOW item identified by NSN 2540-01-707-5164 and part number 4364163, with a total quantity of one EA. The item must be delivered FOB origin within 168 days from the contract award, with no variance permitted in the quantity. Inspection and acceptance occur at the destination, specifically at DLA Distribution Barstow, Central Receiving Whse 7, with the parcel post and freight shipping address both directed to the same location in Barstow, California. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and container requirements, and marking must adhere to MIL-STD-129 with no special marking codes applied. Palletization follows DLA packaging standards, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for this simplified acquisition. The required ship date is January 19, 2027, with the original delivery deadline set for May 31, 2027. Transportation details are governed by DLAD Proc Note C19 for general freight and C20 for first destination movement. The solicitation number is SPE7L4-26-T-5787, issued on July 23, 2026, with responses due by August 3, 2026, under NAICS code 336360, and the point of contact is Anna-Rachelle Betts at DLA.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

INSULATION, THERMAL,This contract specifies the procurement of thermal insulation under solicitation SPE7L4-26-T-5794, with a strict prohibition on the use or incorporation of Class I ozone-depleting chemicals in any supplied items, overriding all other specification requirements while maintaining all product performance standards. Any substitute chemicals must be submitted for approval unless explicitly authorized by existing specifications. The contract incorporates the DLA Master List of Technical and Quality Requirements, which take precedence over commercial standards such as ASTM D3951, and mandates compliance with MIL-STD-129 for marking and labeling, as well as RP001 for packaging. The item, identified by NSN 2540-01-529-7336 and part number 33M1127-107C, must be delivered in a quantity of 33 units with no tolerance for variance, FOB origin, and inspected and accepted at the destination. Packaging must adhere to FED-STD-313, with hazardous materials requiring IP025 compliance and non-hazardous materials packaged according to ASTM D3951 unless superseded by DLA requirements. All packaging must be palletized per RP001 and marked with the specified Unit of Issue and Quantity per Unit Pack. Delivery is required within 168 days of contract award, with an original due date of June 27, 2027, and a needed ship date of January 19, 2027. The delivery destination is DLA Distribution Red River in Texarkana, TX, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract is issued under a federal acquisition framework with a NAICS code of 336360, and point of contact information is provided through Anna-Rachelle Betts at the Department of Defense, with electronic access to DLA documents and unit of issue references available through official links.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

SHAFT, SHOULDEREDThe item specified is a shaft, shouldered, with the NSN 3040-01-356-6837, for a quantity of 259 units, under purchase request 1000237294. Delivery is required within 127 days after award. The solicitation number is SPE7L4-26-U-1002, with a posted date of July 26, 2026, and a response deadline of August 10, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition type and timing. The contract includes cybersecurity requirements mandating CMMC Level 2 certification for third-party assessors and applies to covered defense information. DLA packaging standards must be followed, and government identification must be removed from non-accepted supplies. Technical data associated with this item is subject to U.S. export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 governs its handling. Access to this controlled data is restricted to DLA contractors with approved U.S./Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and formal approval from the DLA controlling authority. The contracting activity is under the Department of Defense, specifically LSO Combat Vehicles and Armament, with Heather Kessler listed as the primary point of contact.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

GEAR, SPURThe contract pertains to the procurement of 10 spur gears, part number 3020-00-817-9538, under solicitation SPE7L4-26-T-5833, with a delivery requirement of 20 days after order placement. The technical specifications and quality standards for this item are governed by the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation issue date. The item is classified as Covered Defense Information, and the supplier must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified Third-Party Assessment Organization. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, prohibiting any transfer or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and subsidiaries. Access to this controlled data is restricted exclusively to contractors who hold a valid US/Canada Joint Certification Program credential, have completed mandatory DOD export control training, and have been formally approved by DLA. The solicitation is issued by the Department of Defense through the LSO Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact, and is open for response until August 6, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

GOVERNOR, DIESEL ENGINEThe contract specifies the procurement of two diesel engine governors with part number 8448939 and NSN 2910-01-280-9338, supplied by ENGINE SYSTEMS, INC. and PROGRESS RAIL LOCOMOTIVE INC., under solicitation SPE7L4-26-T-5829. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering strictly to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling. Packaging must also meet DLA’s packaging requirements and be palletized according to specified standards. The goods must be shipped via the fastest traceable means, excluding parcel post, to Fort Eustis, Virginia, with delivery coordinated by the designated military logistics code W26RK4. The contract is set aside for Women-Owned Small Businesses and falls under NAICS code 333618, issued by the Department of Defense’s Combat Vehicles and Armament office. The required delivery date is July 23, 2026, with a response deadline of August 6, 2026, and a unit price of $2.00 per unit for a total value of $4.00. The purchasing request number is 7017607541, and all documentation must reference the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. The point of contact is Anna-Rachelle Betts, with primary inquiries directed to dla.flda1prs@dla.mil. Government use codes and shipping identifiers are specified for internal tracking, and all packaging must include accurate unit of issue and quantity per unit pack data as defined in the purchase order.

Other Engine Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

BATTERY, STORAGEThis contract is for the procurement of 131 units of a Type I battery storage item with part number 48-11-1813 and NSN 6140017214957 from MILWAUKEE ELECTRIC TOOL CORP, classified as a critical application item requiring government engineering source approval. The item has a non-extendable shelf life of 36 months and must comply with stringent packaging standards per MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf life tracking. Packaging and shipment must adhere to DLA packaging requirements and hazardous material protocols, with the item delivered FOB destination within 11 days of contract award. Mercury or mercury-containing compounds are prohibited unless functionally embedded in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable fluorescent lamps and instruments requiring double containment per NAVSEA guidelines. Inspection and acceptance occur at destination using zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, with all attributes assumed major unless otherwise defined. Transportation logistics follow DLA procedural notes, with delivery directed to the DDSP New Cumberland facility in Pennsylvania. The contract is restricted source, with technical and quality requirements governed by the DLA Master List, and unit of issue is each (EA) at a fixed unit price of $131.00, totaling $17,161.00.

Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

CONNECTING LINK, RIGThis contract is for the procurement of 19 rigid connecting links identified by NSN 3040-01-576-6703 and part number A05-27895-000 under solicitation SPE7L4-26-U-1005, issued by the Department of Defense through the DLA for delivery to a federal customer. The item is classified under NAICS code 333613 and is subject to a Total Small Business Set-Aside, meaning only small businesses may respond. Delivery is required within 127 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-129 for marking and labeling and ASTM D3951 for general packaging, with all DLA Master List of Technical and Quality Requirements overriding any conflicting standards. The unit of issue is each, and the price is $19.00 per unit, totaling $361.00. All packaging and palletization must adhere to DLA’s RP001 requirements, and government identification must be removed from non-accepted supplies as specified in RQ011. The solicitation is managed by the LSO Combat Vehicles and Armament office, with Heather Kessler listed as the primary point of contact.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

CYLINDER ASSEMBLY, ACTUThe contract specifies the procurement of a linear actuating cylinder assembly with a 7.750 inch diameter, an extended length of 18.880 inches, a retracted length of 9.120 inches, and a working pressure of 2500.0 psi, featuring a two-stage design. It is identified for use on NSN 1740-01-266-7299, a crash salvage crane supporting the F/A-18 Hornet aircraft, and is classified as a critical application item. The technical and quality requirements are governed by MIL-PRF-85285, which supersedes MIL-C-83286, and all specifications are drawn from the DLA Master List of Technical and Quality Requirements referenced on the DLA website. Configuration changes require formal engineering change proposals or variance requests, and non-accepted supplies must have government identification removed per specified protocols. The item is supplied under two part numbers: Testek LLC P/N 00241-0150 and Parker-Hannifin Corp P/N 50053801. Three units are to be delivered under CLIN 0001 with a unit price of $1,000,237,292, totaling a contract value of $3,000,711,876. The quantity is fixed with no variance allowed. Delivery is required within 123 days FOB origin, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization adheres to DLA Packaging Requirements for Procurement (RP001), with the DLA Master List prevailing over any conflicting standards. The solicitation number is SPE7L4-26-U-1001, issued by the Department of Defense's LSO Combat Vehicles and Armament office, with a response deadline of August 10, 2026. All supplies are procured via DLA Direct, CONUS, and must adhere to the official DoD unit of issue as defined in the provided ANSI X12 reference document.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

DUAL AXIS FOG GYROThe Dual Axis FOG Gyro is a critical application item under contract SPE7L4-26-T-5836, procured by the Department of Defense through the Defense Logistics Agency for use in combat vehicle and armament systems. The item, identified by NSN 1005-01-566-1917 and part number 1533.0001.501 or 1940018286, is sourced from approved suppliers including BAE Systems Land & Armaments LP, Ofer Motor Co. Ltd, Tamam Division-Israel, and Rafael Advanced Defense Systems Ltd. It requires full compliance with MIL-STD-130 for Item Unique Identification and MIL-STD-129 for marking, with packaging governed by MIL-STD-2073-1E, including specific preservation, wrapping, and containment methods. The contract mandates strict adherence to DLA packaging requirements, palletization standards, and the removal of government identification from non-accepted supplies. Delivery is set for 165 days after award, FOB origin, with final delivery addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The requirement is for ten units at a unit price of $10, with zero variance allowed in quantity, and inspection and acceptance will occur at the destination. The item is subject to technical and quality requirements referenced from the DLA Master List, and all provisions for simplified acquisition control are governed by the revision in effect on the award date. The contract also includes transportation directives and a required ship date of January 19, 2027, with an original delivery deadline of May 13, 2028.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

TUBE ASSEMBLY, METALThis contract is for one unit of a metal tube assembly with NSN 4710-01-319-0872 and part number 255738, supplied by Stewart & Stevenson Power Products LLC under solicitation SPE7L4-26-T-5830. Delivery is required within five days of contract award, with FOB origin terms and no tolerance for quantity variance. The item is designated as a critical application item, and all supplies must strictly comply with DLA packaging requirements and MIL-STD-2073-1E, including specific packaging methods, container types, and marking per MIL-STD-129. Mercury and mercury-containing compounds are prohibited except for approved functional uses in batteries, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, with additional containment requirements for portable devices. The delivery destination is the USS PRINCETON CG 59 at FPO AP 96675, and shipments must use the fastest traceable means, explicitly prohibiting parcel post. Transportation and shipment procedures follow DLA procedural notes C19 and C20, with special handling directed via VSM and the provided TCN. The required delivery date is July 23, 2026, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, effective as of the solicitation issue date.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

TAG, INSTRUCTIONThis contract, issued under solicitation SPE7L4-26-T-5835 by the Department of Defense through the Defense Logistics Agency, mandates the procurement of 50 units of item NSN 9905-21-914-1850 at a unit price of $50.00, totaling $2,500.00, with delivery required within five days of award at FOB origin. All supplies must be packaged per ASTM D3951 and labeled in strict accordance with MIL-STD-129, with packaging and palletization conforming to the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The unit of issue is each (EA), with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery must be shipped by the fastest traceable method, excluding parcel post, and sent to the specified address in Anniston, Alabama, marked for W56YK0 under the government-assigning code W6DX CPE GCP ANNISTON and identified with the tracking number W9095362037549. The original required delivery date is July 28, 2026, with the contract set to expire on August 6, 2026. All items must have government identification removed if not accepted, and the supply is subject to DLA packaging and labeling protocols as referenced in RP001 and RQ011.

Sign Manufacturing

POSTED

about 16 hours ago

DEADLINE

GEAR, SPURThe contract encompasses the procurement of a spur gear with NSN 3020014397923, specified under solicitation SPE7L4-26-T-5831, requiring delivery of one unit within 20 days to the USS THE SULLIVANS DDG 68, addressed through FPO AA 34093. All units must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, unit container type D4, and marking per MIL-STD-129 with no special marking required. Palletization must adhere to DLA’s packaging requirements, and shipments must use the fastest traceable means, explicitly prohibiting parcel post. Delivery is FOB destination with zero quantity variance allowed, and inspection and acceptance occur upon arrival. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, lighting, sensors, weapon systems, or specified reagents, with additional containment requirements for portable devices. The contract references the DLA Master List of Technical and Quality Requirements for technical specifications, and only the version in effect on the solicitation or award date applies depending on acquisition size. The item is designated as a critical application item, and vendors must use the DLA Vendor Shipment Management system. The required delivery date is July 22, 2026, and the contracting office is the Department of Defense’s LSO Combat Vehicles and Armament under the Naval Sea Systems Command, with Anna-Rachelle Betts listed as the primary point of contact.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

PLATE, MOUNTINGThis contract pertains to the procurement of a single mounting plate with NSN 5340-01-297-4688 and part number 10518821, designated as a critical application item for General Dynamics Land Systems Canada. The item must comply with all technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including those related to packaging, sampling, and hazardous material handling. The contract explicitly prohibits the use or incorporation of Class I ozone depleting chemicals, and any substitute chemicals require prior approval unless already authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Packaging must adhere to DLA-specific requirements under RP001, with labeling per MIL-STD-129 and commercial packaging under ASTM D3951 only if the item is non-hazardous; however, DLA requirements take precedence. Hazardous items must conform to TQ requirement IP025. The unit of issue is each (EA), with no variance allowed in quantity, and delivery is due within 20 days FOB origin to Fort Irwin, California, using traceable freight methods—parcel post is prohibited. Inspection and acceptance occur at the destination. The required delivery date is July 22, 2026, and all documentation, marking, and palletization must reflect the specified DLA packaging and labeling standards.

Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

PLATE, MOUNTINGThe contract pertains to the procurement of 25 mounting plates identified by NSN 5340-01-442-5612 under purchase request 7017618406, with a required delivery within five days of award. The solicitation number is SPE7L4-26-T-5825, issued on July 26, 2026, with responses due by August 6, 2026, and is classified under NAICS code 332510 for metal forging and stamping. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item must comply with DLA packaging requirements as outlined in RP001 and incorporates all referenced technical and quality standards identified by R or I numbers. Government identification must be removed from any non-accepted supplies as per RQ011. The contracting activity is under the Department of Defense, specifically the LSO Combat Vehicles and Armament office, with primary point of contact Anna-Rachelle Betts reachable via email and phone provided. The place of performance and delivery location are unspecified, and the solicitation is open to federal contractors without a specified set-aside classification.

Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE