Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturer of Critical Application Plain Hexagon Nuts

Active

Federal

Response Deadline10/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the ASC Commodities Division of the Department of Defense requires the manufacture and delivery of 121 plain hexagon nuts for prime contractors supporting DLA supply contracts. The hardware must be produced in accordance with TDP Rev E Gen 5 and NASM316 Revision 3. Quality assurance mandates dimensional conformance inspection per System 22 of FED-STD-H28/20 and sampling conducted via MIL-STD-1916 or ASQ H1331. To be eligible, the manufacturer must hold SAE AS9003 or ISO 9001 certification and ensure full NAVAIR traceability for all components. The final deliverable consists of 121 inspected and certified nuts to be performed at Robins Air Force Base. The response deadline for this requirement is October 27, 2026.

General Info

Manufacture 121 certified hexagon nuts for DoD by October 27, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-19CQ.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT , PLAIN, HEXAGON

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 27

Submission deadline

Response Deadline

10/27/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 121 plain hexagon nuts for prime contractors delivering DLA supply contracts. Manufactures hardware per TDP Rev E Gen 5 and NASM316 Revision 3, performing dimensional conformance inspection per System 22 of FED-STD-H28/20 and sampling per MIL-STD-1916 or ASQ H1331. Requires SAE AS9003 or ISO 9001 certification and NAVAIR traceability. Delivers 121 inspected and certified plain hexagon nuts.

Similar Contracts

Same NAICS industry code

Supply of Standardized Aerospace/Defense FastenersThis subcontract involves the supply of standardized aerospace and defense hardware components for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work focuses on the sourcing and delivery of certified standard fasteners that strictly adhere to specifications MS35771C, MS51968C, and NASM35338. To ensure quality and regulatory compliance, the provider must furnish Safety Data Sheets and certifications of conformance in accordance with FED-STD-313, while maintaining full adherence to the Buy American Act. The project is managed under NAICS code 332722 for the Department of Defense, with the place of performance located in Texarkana, Texas. Interested parties should note the response deadline of November 2, 2026, for this procurement effort.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Manufacture of Sleeve Spacers (NSN 5365-00-580-5318)This subcontract involves the manufacture of 1,516 precision sleeve spacers, identified by NSN 5365-00-580-5318, for prime contractors supporting the DLA Weapons Support ASC. The finished units must be delivered to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. A critical technical restriction is in place that strictly prohibits the use of additive manufacturing processes during production. To be eligible, the manufacturer must hold either SAE AS9003 or ISO 9001 certification. Additionally, the contractor is required to maintain cybersecurity compliance in accordance with DFARS 252.204-7012 and NIST SP 800-171 standards. The opportunity was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

Precision Flat Washer Manufacturing/SupplyThis subcontract involves the fabrication and supply of 75 precision flat washers, identified by NSN 5310-01-483-5528, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere strictly to provided technical data, specifically excluding the use of additive manufacturing. Quality control requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with packaging and labeling following RP001 and MIL-STD-2073-1E standards. The contractor is required to maintain JCP certification to handle ITAR and EAR regulated data and must provide necessary support for the source inspection of critical items. The final delivery of the 75 units is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310010978025)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of 11,484 flat washers identified by NSN 5310010978025. The selected provider will support prime contractors in fulfilling DLA supply contracts, with performance taking place in New Cumberland. To be eligible, contractors must possess a valid CAGE code and UEI, and the opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332722. The contractor is responsible for strict adherence to DLA specifications, including packaging per RP001, physical identification marking per RQ017, and the removal of government identification per RQ011. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Close Tolerance Bolt FabricationThis subcontract for Close Tolerance Bolt Fabrication involves the production of 61 precision bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to use CNC equipment to meet NSN 5306013483463 specifications while strictly adhering to MIL-STD-1916 or ASQ H1331 sampling plans. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is expressly prohibited. The project is managed under NAICS code 332722 with performance taking place in Tracy, California. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Supplier of Electrical Cable Clamps (NSN 5935012798388)This subcontract, issued by the Department of Defense under the DLA Weapons Support Active Devices Division, requires the supply of 10 commercially packaged electrical cable clamps. The materials must strictly adhere to NSN 5935012798388 specifications and meet manufacturing standards SAE AS85049/39 Rev D and SAE AS85049F Rev F. Performance will take place in Patuxent River, Virginia, under NAICS code 332722. Packaging must comply with ASTM D3951 and DLA RP001, with specific attention to TQ requirement IP025 regarding the handling of hazardous materials. Interested parties must respond by November 2, 2026, to provide these specialized components for prime contractors on DLA supply contracts.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

Manufacturer of Headed Straight PinsThis subcontract opportunity is for the fabrication and supply of 47 headed straight pins to support prime contractors on DLA Weapons Support Land Supply Chain projects. The manufacturer must ensure all pins meet the technical data package for NSN 5315150288213, the DLA Master List of Technical and Quality Requirements, the Buy American Act, and the Berry Amendment. Performance will take place in Barstow, California. Eligible bidders must be small businesses, as this is a Total Small Business Set-Aside under NAICS code 332722. Compliance requirements include maintaining an SAE AS9003 or ISO 9001 quality system and adhering to DFARS 252.204-7012 cybersecurity standards. The response deadline for this Department of Defense requirement is October 30, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Manufacturing of Internal Wrenching Bolts (NSN 5306005845082)This subcontract involves the manufacturing of 833 internal wrenching bolts for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for fabricating bolts to Class 3A and 3B thread specifications, with dimensional conformance verified according to System 22 of FED-STD-H28/20. Performance of this contract requires the use of precision machining equipment and strict adherence to the Buy American Act and Berry Amendment regarding materials. To be eligible, the manufacturer must maintain SAE AS9003 or ISO 9001 compliance. The project is categorized under NAICS code 332722 and will be performed in Cherry Point. Interested parties must respond by October 30, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Precision Machining and Fabrication of Close Tolerance BoltsThis subcontract involves the precision machining and fabrication of 476 close tolerance bolts, identified as NSN 5306011653309, for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to produce Part Piece Number NA0036-080016 in strict accordance with TDP Rev B Gen 3 and Basic Non-Govt Std NA0036 Revision Nr 7. Production must be carried out using traditional machining processes, as additive manufacturing is explicitly prohibited for this project. To ensure quality and compliance, the contractor must hold either SAE AS9003 or ISO 9001 certification. Additionally, all units must undergo sampling according to MIL-STD-1916 or ASQ H1331 standards. The work is to be performed in New Cumberland, Pennsylvania, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Supplier of Self-Locking Plate Nuts (NSN 5310-01-181-5040)This subcontract involves the manufacture or procurement of 24 self-locking plate nuts, identified by NSN 5310-01-181-5040, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The items are designated for critical applications and must be produced in accordance with the DLA Master List of Technical and Quality Requirements. Delivery is established as FOB Origin with the place of performance located at Tinker AFB. Strict adherence to quality and regulatory standards is required, including quality control per MIL-STD-1916 or ASQ H1331 and packaging and marking per ASTM D3951 and MIL-STD-129. Additionally, all materials must comply with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Machine Bolt Supplier (NSN 5306-01-433-9185)This subcontract involves the procurement of 794 machine bolts, part number 4397000-013, to support prime contractors on DLA Weapons Support combat vehicle projects. The supplier is responsible for manufacturing or sourcing fasteners that strictly adhere to NSN 5306-01-433-9185, while ensuring full compliance with the Buy American Act and the Berry Amendment. All items must undergo quality control in accordance with the DLA Master List of Technical and Quality Requirements and be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The contract is managed under NAICS code 332722 for the Department of Defense. Final delivery of the 794 bolts is required FOB Origin to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. Interested parties must note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

Manufacturer of Hexagon Head Cap Screws (NASM90725)This subcontract involves the manufacture of 900 high-precision hexagon head cap screws, identified by NSN 5305013258388 and part number MS90725-113, for the DLA Weapons Support ASC Commodities Division. The contractor must fabricate the screws according to NASM90725 Revision 04 and utilize precision machining equipment and a dedicated quality control lab. Quality assurance sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331. The project requires strict adherence to the Buy American Act, MIL-STD-2073-1E, and MIL-STD-129. Performance will take place in Albany, Georgia. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Military-Spec Packaging and Marking ServicesThis subcontract for Military-Spec Packaging and Marking Services, issued by the Department of Defense ASC Commodities Division, requires specialized packaging and marking for prime contractors fulfilling DLA supply contracts. The scope of work involves packaging items according to MIL-STD-2073-1E and RP001 standards, while applying critical markings such as contract numbers, NAWC CAGE, and part numbers in compliance with MIL-STD-129 and MIL-STD-130N. All work must be performed using industrial marking equipment and military-grade materials to ensure shipments are fully prepared for FOB Origin transport. The project is categorized under NAICS code 561990 and will be performed at Robins Air Force Base. Interested parties should note the response deadline of October 27, 2026, for this specific requirement.

All Other Support Services

POSTED

about 15 hours ago

DEADLINE

Supply of Plain Square Nuts (NSN 5310017295489)This subcontract through the Department of Defense ASC Commodities Division involves the procurement of three units of plain square nuts, identified by NSN 5310017295489. The selected manufacturer or source must ensure all items adhere to MIL-STD-1916 or ASQ H1331 quality assurance standards using zero-based sampling plans. Additionally, the contractor is responsible for packaging and marking the items in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001. The contract requires strict compliance with the Buy American Act and DFARS cybersecurity regulations. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 27, 2026, for this requirement categorized under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Self-Locking Hexagon Nuts (NSN 5310010573109)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 1,454 self-locking hexagon nuts with extended washers, specifically meeting NSN 5310010573109 specifications. The contractor is responsible for manufacturing or sourcing these fasteners and ensuring strict quality control through dimensional conformance inspections on Class 3A and 3B threads using precision thread gauging equipment. Compliance is mandatory regarding sampling procedures, which must follow MIL-STD-1916 or ASQ H1331 standards. The performance of this contract is centered in Norfolk, and the procurement falls under NAICS code 339943.

Marking Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Socket Head Cap Screw SupplierThis subcontract involves the supply of 1,000 Socket Head Cap Screws, specifically NSN 5305-01-262-4117, for prime contractors under the Department of Defense ASC Commodities Division. The supplier is responsible for manufacturing or sourcing fasteners that are entirely free of mercury compounds. Strict adherence to quality control is required, including zero-based sampling and packaging that complies with MIL-STD-129, RP001, and MIL-STD-2073-1E standards. The contract mandates high security and compliance certifications, specifically CMMC Level 2, NIST SP 800-171, and the US/Canada Joint Certification Program. Final delivery of the units is designated as FOB Destination to DLA Distribution San Joaquin in Tracy, California. The opportunity was posted on October 22, 2026, with a response deadline of October 27, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Straight Headle PinsThis subcontract through the Department of Defense ASC Commodities Division involves the manufacture or sourcing of straight headle pins meeting NSN 5315016974860 specifications. The contractor is responsible for delivering one unit of properly packaged and marked hardware to Williamsburg, Virginia, ensuring full compliance with the Buy American Act, the Berry Amendment, MIL-STD-2073-1E, and MIL-STD-129. Quality assurance will be managed through destination inspection and sampling conducted in accordance with MIL-STD-1916 or ASQ H1331. The opportunity falls under NAICS code 332618, with a response deadline set for October 27, 2026.

Other Fabricated Wire Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Electrical Contact Brush HoldersThis subcontract through the ASC Commodities Division of the Department of Defense requires the provision of 43 Electrical Contact Brush Holders. The contractor is responsible for manufacturing or sourcing components that strictly adhere to NSN 5977013305984 specifications and all applicable DoD quality requirements to support prime contractors delivering DLA supply contracts. The project falls under NAICS code 335999 and specifies a delivery window of 38 days for the completion of the order. Performance for this contract is centered in Tracy, California, with a response deadline set for October 27, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Manufacture of Electrical Holder (NSN 5977-01-330-5984)This subcontract involves the manufacture of 19 units of Electrical Holder C for the Department of Defense ASC Commodities Division. The contractor is responsible for fabricating components that strictly adhere to Basic Drawing NR 53711 7053083, Revision C and Reference Drawing NR 53711 7053086, Revision B. To ensure the final products meet the specific tolerances required for NSN 5977-01-330-5984, the use of precision machining or molding equipment is mandatory. The project is categorized under NAICS code 335999 and will be performed in Tracy, California. Compliance with rigorous security and defense standards is required, specifically DFARS 252.204-7012 and CMMC Level 2. Interested parties must submit their responses by October 27, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-33LC

Solicitation SPE4A6-26-T-33LC is a fixed-price procurement issued by the DLA Aviation ASC Commodities Division for the supply of blind rivets, identified by NSN 5320010431933 and part number NAS9311M-6-06. The requirement is for a quantity of six units to be delivered to DLA Distribution Warner Robins, with a need ship date of March 17, 2027, and an original required delivery date of April 21, 2027. The items are defined by military and non-government standards, specifically NAS9311 and NAS1687, and are designated as critical application items. Quality assurance is stringent, requiring inspection and acceptance at the origin. Manufacturers must maintain a quality system complying with SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. The contract incorporates various FAR and DFARS clauses, including those for combating trafficking in persons, safeguarding covered defense information, and the Buy American Act. A price evaluation preference is available for certified HUBZone small businesses, and the government will not evaluate offers utilizing additive manufacturing processes. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system.

Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

DAMPER, SPECIAL

Solicitation # SPE4A6-26-T-29VC

Solicitation SPE4A6-26-T-29VC is a fixed-price request for quotation issued by the DLA Aviation ASC Commodities Division for the procurement of four special seal dampers, identified by NSN 2835-01-294-4165. This is designated as a critical application item that may require specific casting or forging tooling, for which the government may not provide assistance. The required delivery date is February 8, 2027, with a need ship date of March 14, 2027, for delivery to DLA Distribution San Diego. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Notably, the use of mercury or mercury compounds is prohibited in preservation, packaging, and marking. Offerors must submit quotes via the DIBBS system and comply with various federal regulations, including the Buy American Act, DFARS cybersecurity requirements, and the Hazard Communication Standard for any hazardous materials.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 15 hours ago

DEADLINE

HOLDER, ELECTRICAL C

Solicitation # SPE4A6-26-T-12RG

Solicitation SPE4A6-26-T-12RG is a fixed-price request for the procurement of 43 electrical contact brush holders, identified by NSN 5977-01-330-5984. The contract is issued by the DLA Aviation ASC Commodities Division and is not a small business set-aside. Delivery is required within 38 days after receipt of order, with a required delivery date of December 27, 2026, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. Eligibility for award requires offerors to possess an approved US/Canada Joint Certification Program certification and approval from the DLA controlling authority due to export-controlled technical data subject to ITAR or EAR regulations. The contract mandates strict adherence to packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirement RP001. Additionally, the awardee must comply with the Buy American Act, the Berry Amendment, and cybersecurity standards, including CMMC Level 2 and DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Carbon and Graphite Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

SCREW, CAP, SOCKET HE

Solicitation # SPE4A6-26-T-05C0

Solicitation SPE4A6-26-T-05C0 is a federal procurement for 1,000 units of socket head cap screws (NSN 5305-01-262-4117) under NAICS code 332722. The contract is not a small business set-aside and requires delivery to the DLA Distribution San Joaquin facility in Tracy, California, with a required delivery date of March 23, 2026, and a lead time of 191 days ADO. The procurement is governed by FOB Destination terms, though offers should be submitted based on FOB Origin. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 certification and compliance with NIST SP 800-171. Technical data is subject to ITAR or EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Packaging and marking must comply with MIL-STD-129 and RP001, with a specific prohibition on mercury compounds. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing zero-based sampling plans. Additionally, the Buy American and Balance of Payments Program applies to all quotes above the micro-purchase threshold.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

SCREW, STOP VALVE

Solicitation # SPE4A6-26-T-37FD

Solicitation SPE4A6-26-T-37FD is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of six stop valve screws, identified by NSN 5305-01-155-7920. The delivery is required within 103 days after receipt of order, with the place of performance and delivery located in Tracy, California. Inspection and acceptance will occur at the point of origin. Offerors must ensure the manufacturer's inspection system complies with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and items produced via additive manufacturing are strictly ineligible for award. This procurement is subject to stringent export controls under ITAR and EAR, requiring awardees to maintain an approved US/Canada Joint Certification Program certification. Compliance with the Buy American Act and Berry Amendment is required, and a price evaluation preference is available for SBA-certified HUBZone Small Business Concerns. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with a total prohibition on mercury compounds. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to NIST SP 800-171 and CMMC Level 2 cybersecurity standards.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS