Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturer of Electrical Insulation Sleeving (Dust/Moisture Boots)

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of ten specialized dust and moisture seal boots for prime contractors supporting the DLA Weapons Support Land Supply Chain. The items must be produced according to NSN 5340-01-190-5915 specifications using materials suitable for electrical insulation sleeving. All deliverables must adhere to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. To be eligible, the provider must maintain an ISO 9001:2015 quality system and ensure full compliance with ITAR, EAR, and CMMC Level 2 requirements. The project falls under NAICS code 326220, with the place of performance located in Albany. Interested parties must respond by the deadline of November 2, 2026.

General Info

Manufacture ten specialized seal boots for DLA by November 2, 2026, in Albany.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

326220 - Rubber and Plastics Hoses and Belting Manufacturing

Place of Performance

ALBANY, GA, 31704-1128, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-2029.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOOT, DUST AND MOISTURE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies dust and moisture seal boots for prime contractors on DLA Weapons Support Land Supply Chain projects. Manufactures specialized seal boots to NSN 5340-01-190-5915 specifications using materials for electrical insulation sleeving. Requires ISO 9001:2015 quality system, CMMC Level 2, and ITAR/EAR compliance. Packages and marks items per MIL-STD-2073-1E and MIL-STD-129. Delivers 10 completed seal boots.

Similar Contracts

Same NAICS industry code

Supply of O-Rings (NSN 5331012887860)This subcontract involves the manufacture or procurement of O-rings specifically meeting technical specifications for NSN 5331012887860 to support prime contractors under the DLA Weapons Support Land Supply Chain. The scope of work requires the delivery of completed, labeled components that adhere to strict packaging standards, utilizing duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1 and RP001 DLA Packaging Requirements. Managed under NAICS code 326220 for the Department of Defense, the project is centered in New Cumberland. Interested parties must note the response deadline of November 2, 2026, to provide the necessary supplies for this defense-related supply chain operation.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Supplier of Positive Drive Belts (NSN 3030015691134)This subcontract involves the procurement of 42 positive drive belts, specifically Part Number D3001 from Insinger Machine Co or an approved equivalent under NSN 3030015691134, to support DLA Weapons Support Land projects. The selected supplier is responsible for manufacturing or sourcing the units and ensuring all items are packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract requires full compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200 safety regulations. Final delivery of the 42 units is designated as FOB Origin to the DLA Distribution DDSP facility located in New Cumberland. This effort is managed under NAICS code 326220 for the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 6 hours ago

DEADLINE

Manufacturer of Preformed Packing (NSN 5330015115783)This subcontract involves the manufacture and supply of 17 preformed packing units under NSN 5330015115783 for the DLA Weapons Support Land Supplier Opns Vehicle Spt. The contractor is responsible for ensuring all units adhere to strict technical specifications and are free from intentionally added mercury or mercury-containing compounds. All deliverables must meet DLA quality inspection standards upon arrival at the destination. The project falls under NAICS code 326220 and is managed by the Department of Defense. Performance for this contract is centered in Tracy, California. Interested parties must note the response deadline of November 2, 2026, to provide the required units for the prime contractor.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

Supply of Specialized O-Rings (NSN 5331-00-425-1596)This subcontract involves the procurement of 338 specialized O-rings for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing the hardware according to NSN 5331-00-425-1596 specifications, with a strict requirement that all materials remain free from mercury or mercury-containing compounds. The agreement mandates full compliance with the Buy American Act and the Berry Amendment. Delivery of the components is set as FOB Origin, with performance centered in New Cumberland. The project falls under NAICS code 326220 and requires responses by November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Manufacturer of Metallic Hose AssembliesThis subcontract involves the fabrication and delivery of 17 custom metallic hose assemblies for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Opns Engines. The assemblies must be manufactured according to NSN 4720015386215 and Oshkosh Defense LLC part number 3483866 specifications. Performance will take place in Barstow, California, under NAICS code 326220. The contractor is required to strictly adhere to the DLA Master List of Technical and Quality Requirements (RA001), as well as the Buy American Act and the Berry Amendment. The project requires the delivery of 17 completed units, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 6 hours ago

DEADLINE

Rubber Component Supplier for Actuating CylindersThis subcontract opportunity is for a supplier to provide high-precision rubber seals, O-rings, and gaskets to prime contractors supporting DLA supply contracts for actuating cylinders. The selected provider will utilize industrial rubber molding or extrusion equipment and specialized elastomers to manufacture components that meet strict technical tolerances and DLA quality standards. These parts are intended for integration into cylinder parts kits. The contract is managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located at Hill AFB. Interested parties must respond by November 2, 2026. The requirement falls under NAICS code 326220.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

Gasket Set Supplier (NSN 5330-01-337-4800)This subcontract involves the manufacture and delivery of 26 certified gasket sets for electro-mechanical rotary actuators, specifically under NSN 5330-01-337-4800. The supplier must adhere to the DLA Master List of Technical and Quality Requirements RA001 and ensure all materials are mercury-free and contain zero asbestos. The contract is managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations. All deliverables must be packaged in waterproof, greaseproof, and opaque bags in accordance with MIL-STD-2073-1E and MIL-DTL-117 standards. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must respond by the deadline of November 2, 2026, for this requirement categorized under NAICS code 326220.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

Nonmetallic Hose Assembly Manufacturing and SupplyThis subcontract involves the manufacture and supply of nonmetallic hose assemblies for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work specifically requires the production or sourcing of NSN 4720-99-355-5685, also known as Part Number 2164-202, ensuring that no Class I ozone-depleting chemicals are used during the process. The contractor is responsible for delivering five completed hose assemblies to DLA Distribution San Joaquin in Tracy, California. All deliverables must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards for packaging and marking. The opportunity is categorized under NAICS code 326220 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of High-Performance Window Seals (NSN 5330-00-097-1087)This subcontract involves the supply of 40 feet of high-performance specialized window seals, identified as NSN 5330-00-097-1087, for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for manufacturing or sourcing the material with full NAVAIR Aircraft Launch and Recovery Equipment traceability. Strict adherence to safety and material standards is required, specifically prohibiting the use of asbestos and mercury. All items must be marked according to MIL-STD-130N and packaged in waterproof, greaseproof, and opaque bags in compliance with MIL-DTL-117 and MIL-STD-2073-1E. The project falls under NAICS code 326220 and is managed by the Department of Defense, with the place of performance located in New Cumberland.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Preformed Packing (NSN 5330-01-476-7117)This subcontract involves the manufacturing and supply of 79 units of preformed packing components for prime contractors supporting the Department of Defense, specifically under the DLA Weapons Support Land Supplier Operations. All components must be fabricated in strict accordance with NSN 5330-01-476-7117 and the DLA Master List technical requirements. Performance will take place in San Diego, California, under NAICS code 326220. The contractor is required to maintain DFARS cybersecurity compliance and adhere to the Buy American Act. Quality assurance must be managed through MIL-STD-1916 or ASQ H1331 zero-based sampling plans to ensure all deliverables meet rigorous military standards. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

O-Ring Supplier (NSN 5331005992882)This subcontract involves the manufacture or procurement of 1,232 O-rings under NSN 5331005992882 for the DLA Weapons Support Land Supply Chain. These components are intended for critical application use and must maintain a shelf life of 180 months. The successful provider must ensure that no Class I ozone-depleting chemicals are utilized during production and must strictly adhere to the Berry Amendment and Buy American compliance standards, including the provision of full supply chain traceability. The deliverables are to be shipped FOB Origin to DLA Distribution San Diego. This opportunity falls under NAICS code 326220 and is managed by the Department of Defense. Interested parties must meet the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Supply of Hydraulic Seals and Gaskets for Linear ActuatorsThis subcontract involves the supply of high-pressure hydraulic seals, gaskets, and O-rings to support prime contractors for the DLA Weapons Support Land Supply Chain. The scope of work includes the manufacture or sourcing of components made from Nitrile, Viton, or PTFE, ensuring all parts meet specific temperature and pressure ratings. The provider is responsible for delivering seal kits for 14 cylinder assemblies while providing necessary material safety data sheets and maintaining strict compliance with environmental restrictions. The contract is categorized under NAICS code 326220 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

MIL-SPEC Packaging and International Shipping ServicesThis subcontract for MIL-SPEC Packaging and International Shipping Services supports the DLA Weapons Support Land Supply Chain. The selected provider will perform specialized military-grade packaging, marking, and shipping for prime contractors, ensuring strict adherence to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. A key requirement of the project is the total avoidance of plastics for any wrapping or cushioning materials. The scope of work involves the delivery of two palletized units coordinated via FOB Origin shipping to destinations in Iwakuni, Japan, and Jacksonville, Florida. The units must be appropriately marked for both international and domestic transit. This opportunity falls under NAICS code 561910 and is managed under the Department of Defense.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Belt-Chain Tension Adjusting Device SupplierThis subcontract involves the supply of two belt-chain tension adjusting devices for prime contractors supporting the DLA Weapons Support Land Supply Chain. The supplier is responsible for manufacturing or sourcing devices that strictly adhere to NSN 2990-01-141-5776 specifications. The agreement requires full compliance with the DLA Master List of Technical and Quality Requirements (RA001) and the Buy American/Balance of Payments Program under DFARS 252.225-7001. This procurement is categorized under NAICS code 332999 and is managed by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors delivering supply contracts for the DLA Weapons Support Land Supply Chain. The scope of work involves the specialized marking, packaging, and palletization of 2,500 units destined for DLA Distribution DDSP New Cumberland. All operations must adhere to strict military and industry standards, specifically utilizing MIL-STD-129 for shipment marking, ASTM D3951 for non-hazardous commercial packaging, and RP001 standards for palletization. The project requires the use of MIL-SPEC marking equipment and materials compliant with ASTM D3951. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 2, 2026, for this Department of Defense requirement categorized under NAICS code 561910.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Protective Dust and Moisture Seal PlugsThis subcontract involves the manufacture of 2,500 protective dust and moisture seal plugs and caps for prime contractors supporting DLA supply contracts. The components must be fabricated to NSN 5340-01-146-9729 dimensions using precision molding or machining of specialized plastics, rubbers, or polymers. All production must adhere to the Buy American Act and Berry Amendment, with quality assurance sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. The project is managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, with performance taking place in New Cumberland. Interested parties must note the response deadline of November 2, 2026. The contract falls under NAICS code 326199 and requires the delivery of 2,500 finished seal plugs.

All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Preformed O-Rings (NSN 5331008079637)This subcontract involves the manufacture or procurement of 89 preformed O-rings matching NSN 5331008079637 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is required to apply Special Marking Code 32 and ensure all marking adheres to MIL-STD-129. Packaging must be completed in accordance with MIL-STD-2073-1E, RP001, and IP025 standards, utilizing specific cushioning and dunnage to ensure product integrity. The final deliverables are to be shipped to the DLA Distribution DISP New Cumberland Facility in New Cumberland, Pennsylvania. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support Land Supply Chain. The contractor is responsible for the military-grade packaging and marking of 103 pistons, ensuring strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the scope of work requires palletization following RP001 DLA Packaging Requirements and the use of specific cushioning and preservative materials to ensure the items are shipment-ready. The project is categorized under NAICS code 493110 and will be performed in Anniston, Alabama. Interested parties should note the response deadline of November 2, 2026, for this specialized logistics and material handling requirement.

General Warehousing and Storage

POSTED

about 6 hours ago

DEADLINE

Specialized Alloy Supply for Actuating PistonsThis subcontract involves the supply of raw bar stock or forged material for actuating pistons to support prime contractors under the DLA Weapons Support Land Supply Chain. All provided materials must strictly adhere to the chemical and physical properties specified in Drawing NR 19207 12344830. To ensure the verification of Critical Application Items, the supplier is required to provide comprehensive Mill Test Reports along with the certified raw material stock. The contract mandates strict compliance with domestic sourcing regulations, specifically the Buy American Act and the Berry Amendment. Performance for this requirement is centered in Anniston, Alabama, under NAICS code 331210. Interested parties must submit their responses by the deadline of November 2, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 6 hours ago

DEADLINE

Precision Machining of Linear Actuating Cylinder PistonsThis subcontract involves the precision machining, turning, and finishing of 103 linear actuating cylinder pistons for the DLA Weapons Support Land Supply Chain. All work must be performed in accordance with Basic Drawing NR 19207 12344830 Rev D and TDP Rev B Gen 2. Due to the nature of these Critical Application Items, the contractor is required to utilize CNC lathes, mills, and specialized inspection equipment. To be eligible, the provider must hold ISO 9001:2015 and CMMC Level 2 certifications. The project is categorized under NAICS code 332710 and will be performed in Anniston. Interested parties must respond by November 2, 2026, to deliver the final quantity of 103 finished pistons.

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves the specialized packaging, sealing, and marking of rubber O-rings to ensure they are ready for FOB Origin shipment. Specifically, the contractor must seal components in medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1, while applying all necessary markings per MIL-STD-129 and MIL-STD-2073-1E. The project is managed under NAICS code 561910 for the Department of Defense and will be performed at Robins Air Force Base. Interested parties should note the response deadline of November 2, 2026.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

High-Performance O-Ring Manufacturer (NSN 5331-00-459-9469)This subcontract involves the precision manufacture and delivery of 1,258 O-rings for the Department of Defense under the DLA Weapons Support Land Supply Chain. The components must be produced according to NSN 5331-00-459-9469 and the DLA Master List of Technical and Quality Requirements, with a strict mandate that all materials are asbestos-free. To ensure regulatory compliance, the manufacturer must adhere to the Berry Amendment and the Buy American Act. Eligible providers are required to hold PRI QML or QPL accreditation to qualify for the project. Performance will take place at Robins Air Force Base, with a response deadline set for November 2, 2026. The contract falls under NAICS code 326199 and is intended for prime contractors supporting these specific land supply chain operations.

All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the packaging of items in accordance with ASTM D3951 and RP001 standards, utilizing military-specification crates and moisture barriers. Additionally, the contractor must ensure all identification marking complies with MIL-STD-129 and MIL-STD-130N(1) regulations. The project culminates in the delivery of six fully packaged assemblies ready for shipment to DLA Distribution Red River. Performance will take place in Texarkana, Texas, under NAICS code 488510. Interested parties should note the response deadline of November 2, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Supply of Aerospace-Grade Alloys for Drive ShaftsThis subcontract involves the supply of aerospace-grade alloys and semi-finished components for drive shafts to support prime contractors under the DLA Weapons Support Land Supply Chain. The scope of work focuses on providing high-strength alloys and flexible couplings that strictly adhere to Basic Drawing NR 55717 13025094 specifications. All certified raw materials must be delivered directly to the manufacturer. To ensure quality and regulatory adherence, the contract mandates full compliance with the Berry Amendment and requires the submission of Mill Test Reports for complete material traceability. Performance for this project is centered in Texarkana, Texas, under NAICS code 331210. The response deadline for this opportunity is November 2, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS