Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturer of Machine Screws (NSN 5305-01-722-4154)

Open

Federal

Response Deadline11/13/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision manufacture and delivery of 6,000 machine screws under NSN 5305-01-722-4154 for the DLA Weapons Support ASC Commodities Division. The manufacturer must strictly adhere to the DLA Master List of Technical and Quality Requirements (RA001) and is explicitly prohibited from using additive manufacturing. Quality assurance must be maintained through MIL-STD-1916 or ASQ H1331 sampling standards. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification and be approved under the US/Canada Joint Certification Program for the handling of ITAR and EAR data. The project falls under NAICS code 332722, with performance located in New Cumberland. The response deadline for this opportunity is November 13, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-9788.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCREW, MACHINE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 12:00:00 PM ESTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies precision-manufactured machine screws for prime contractors on DLA Weapons Support ASC projects. Manufactures screws to NSN 5305-01-722-4154 and DLA Master List of Technical and Quality Requirements (RA001) without additive manufacturing. Adheres to MIL-STD-1916 or ASQ H1331 sampling. Requires SAE AS9003 or ISO 9001 certification and US/Canada Joint Certification Program approval for ITAR/EAR data. Delivers 6.000 EA machine screws.

Similar Contracts

Same NAICS industry code

Precision Manufacturing of Close Tolerance Screws (NAS1994C4T)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Hose Clamp Supplier (NSN 4730-01-601-8071)This subcontract involves the manufacture or sourcing of 756 finished, packaged, and palletized hose clamps for prime contractors serving the Department of Defense DLA Weapons Support Fluid Handling Division. The required components must feature an open size of 3-1/2 inches and a closed size of 3-3/16 inches, adhering strictly to Basic CID A-A-52506E Revision E and Part Number AA52506-SLTB-74. The supplier must ensure full compliance with MIL-STD-1916, ASTM D3951, and NIST SP 800-171 standards. Performance for this contract is based in New Cumberland, Pennsylvania, under NAICS code 332722. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Tapping Screw Procurement (NSN 5305-00-998-3248)This subcontract involves the procurement of 17 tapping screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing screws that strictly adhere to NSN 5305009983248 and the DLA Master List of Technical and Quality Requirements. Performance will take place at Davis Monthan AFB, with all items required to be packaged according to MIL-STD-129 and ASTM D3951 and palletized per RP001. The contractor must maintain compliance with Buy American regulations and DFARS 252.204-7012 cybersecurity standards. Final delivery requires the submission of invoices and receiving reports through the Wide Area WorkFlow system. This requirement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Stamped Steel Nut Fabrication (Unplated)This subcontract involves the fabrication of unplated stamped steel nuts for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work requires the use of industrial stamping presses and custom dies to form steel stock into nut geometry in strict accordance with MS27151C Revision C. Quality assurance is a critical component of the contract, requiring the execution of zero-based sampling plans per MIL-STD-1916 or ASQ H1331 to ensure all delivered components meet precise dimensional specifications. The performance of this contract is centered in Barstow, California, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Machine Bolt Supplier (NSN 5306-01-695-3726)This subcontract involves the procurement of 1,564 machine bolts for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing the bolts in accordance with NSN 5306-01-695-3726 and standards NASM3 through NASM20 and NASM6812. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331, with packaging adhering to MIL-STD-2073-1E and MIL-STD-129. The selected vendor must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. All materials are to be delivered FOB Origin to DLA Distribution San Diego. This requirement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

Precision Setscrew Fabrication (NSN 5305-00-616-2095)This subcontract involves the fabrication of 155 setscrews for prime contractors supporting DLA Weapons Support ASC projects. All parts must be manufactured according to NSN 5305-00-616-2095 and the DLA Master List of Technical and Quality Requirements. The contract strictly mandates the use of traditional manufacturing processes, as additive manufacturing is explicitly prohibited. Finished and packaged components must undergo quality sampling in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with NIST SP 800-171 standards. The work is associated with NAICS code 332722 and will be performed in Corpus Christi, Texas. Interested parties must respond by November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of NSN 5305-01-5546688This subcontract involves the supply of hardware components under NSN 5305-01-5546688 for the Department of Defense, specifically supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing 250 total units, delivered in 10 packages. All materials must be packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129, while adhering to the DLA Master List of Technical and Quality Requirements. The project falls under NAICS code 332722 and is to be performed in Tracy, California. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305015041494)This subcontract involves the supply of 95 units of machine screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing screws that strictly adhere to NSN 5305015041494 specifications. All deliverables must be marked according to MIL-STD-129 and palletized in compliance with RP001 DLA Packaging Requirements, with hazardous material labeling applied as required by DFARS 252.223-7001. Performance of this contract takes place in Tracy, California, under NAICS code 332722. To ensure the security of sensitive information, the provider must maintain cybersecurity compliance with DFARS 252.204-7012 and achieve CMMC Level 2 certification. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Socket Head Cap Screw Manufacturing (NAS1189/NAS4002)This subcontract involves the manufacture of 2,500 high-precision socket head cap screws for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The production must adhere to NAS1189 and NAS4002 standards, with physical identification and bare item marking performed according to MIL-STD-130N. To ensure quality and compliance, the contractor must utilize precision CNC machining or cold-heading equipment and source materials that comply with the Buy American Act, while following MIL-STD-1916 or ASQ H1331 quality assurance protocols. The project is categorized under NAICS code 332722 and will be performed at Hill AFB. Interested parties must respond by November 13, 2026, to provide the finished, marked, and inspected hardware.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Flat Washer Supplier (NSN 5310-01-646-8694)This subcontract involves the manufacture or sourcing of 85 packages of flat washers for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The required components must match Part Number 201385 from Hamilton Jet, Inc. or Kraft Power Corporation, adhering to NSN 5310-01-646-8694. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The supplier is responsible for strict quality assurance sampling in accordance with MIL-STD-1916 or ASQ H1331 and must guarantee that no mercury is intentionally added to the products. Additionally, the contractor must maintain full compliance with the Buy American Act. The response deadline for this requirement is November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Lock Washers (NSN 5310-01-476-9941)This subcontract involves the manufacture or procurement of 619 lock washers conforming to NSN 5310-01-476-9941 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor must ensure all materials are free of mercury compounds and adhere to strict military standards for packaging, marking, and palletization, specifically MIL-STD-2073-1E, MIL-STD-129, and DLA RP001. The completed order of 619 units is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This requirement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Manufacture of NASM24693 Machine Screws

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Shoulder Screw Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 371 shoulder screws, identified by NSN 5305017223405, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. All hardware must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. Strict adherence to technical and quality standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. Additionally, the provider must maintain a quality management system compliant with either SAE AS9003 or ISO 9001. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

Spring (Heavy Gauge) Manufacturing

POSTED

about 3 hours ago

DEADLINE

Machine Bolt Supplier (NSN 5306-0133-73780)This subcontract involves the supply of 11 machine bolts identified by NSN 5306013373780 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the bolts to ensure they meet all required material specifications. Additionally, the contractor must provide Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The contract falls under NAICS code 333318 and specifies the place of performance as Tracy, California. Interested parties must adhere to the response deadline of November 13, 2026, following the posting date of November 6, 2026.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Wire Strand Band (P/N 79/15VZ)

Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

Continuous Thread Stud SupplyThis subcontract involves the manufacture or procurement of five critical application continuous thread studs for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The deliverables must strictly adhere to Technical Drawing TDP Rev A Gen 2 and Basic Drawing NR 53711 6985434 Revision A, ensuring they match NSN 5307-01-652-8969 and Part Piece Number 566-6985434-29. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332611. A critical requirement of this agreement is full compliance with DFARS 252.204-7012 and NIST SP 800-171 cybersecurity standards to ensure the protection of sensitive information.

Spring (Heavy Gauge) Manufacturing

POSTED

about 3 hours ago

DEADLINE

Third-Party Quality Inspection and Certification (Zero-Based Sampling)

Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

Supply of Retaining Rings (NSN 5325013106732)This subcontract involves the manufacture or procurement of retaining rings for prime contractors supporting DLA supply contracts. The specific requirements call for rings matching part number 2144-0088 and national stock number 5325013106732, with a delivery quantity of one unit shipped FOB Destination. The contractor must ensure strict adherence to military and safety standards, including marking per MIL-STD-129 and packaging according to RP001 and MIL-STD-2073-1E using JA wrap material. Additionally, all hazardous material labeling must comply with 29 CFR 1910.1200. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Machine Key Manufacturing and Supply (NSN 5315-008-995273)

POSTED

about 3 hours ago

DEADLINE

Steel Stock Supply for Fastener ProductionThis subcontract involves the supply of raw steel stock for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the delivery of certified steel sheet or coil that adheres to the specific metallurgical and hardness standards outlined in MS27151C. To ensure quality and compliance, the provider must submit Material Test Reports certifying the origin and composition of the steel and must strictly comply with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in Barstow, California. This procurement falls under NAICS code 332999 and was posted on November 6, 2026, with a response deadline of November 13, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Cadmium Plating for Steel FastenersThis subcontract involves providing specialized chemical plating services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the surface preparation and cadmium coating of stamped steel nuts in accordance with MS27151C standards. Utilizing electroplating tanks and chemical baths, the contractor is responsible for applying the coating and verifying both adhesion and plating thickness to ensure quality compliance. The project is based in Barstow, California, and falls under NAICS code 332813. Due to the nature of the materials used, the contractor must maintain all necessary environmental permits for the handling of cadmium. The final deliverable for this engagement is the provision of fully processed cadmium-plated steel nuts.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 3 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Close Tolerance Screw Manufacturing (NSN 5305008387329)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Precision Machining - Air Force Critical Safety Item (Shoulder Bolts)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Close Tolerance Screw Manufacturing (NAS1580)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305-01-412-9817)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Concave Washers (Piece 101)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Socket Head Cap Screw Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310-01-415-2649)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Supply of Retaining Clips (NSN 5340014851369)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Hexagon Head Cap Screw Supplier (NSN 5305-01-554-6208)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Hexagon Head Cap Screw Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Machine Screw Supply (NSN 5305-01-254-2551)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS