Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturer of Metallic Tubes and Fittings (NSN 4710-01-515-6754)

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture of 13 metallic tubes and fittings, specifically NSN 4710-01-515-6754, for prime contractors supporting the DLA Weapons Support ASC. The contractor is responsible for fabrication according to the DLA Master List of Technical and Quality Requirements and must perform bare item marking in accordance with RQ017. All delivered units must undergo inspection and acceptance to fulfill the contract requirements. The project is managed under NAICS code 331210 and will be performed in Cherry Point. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is October 21, 2026.

General Info

Manufacture 13 metallic tubes and fittings for DLA by October 21, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-1053.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE AND FITTINGS, META

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures metallic tubes and fittings for prime contractors delivering DLA Weapons Support ASC supply contracts. Fabricates 13 units of NSN 4710-01-515-6754 per DLA Master List of Technical and Quality Requirements. Performs bare item marking per RQ017. Requires CMMC Level 2 and compliance with Buy American Act and Berry Amendment. Delivers 13 inspected and accepted metallic tubes and fittings.

Similar Contracts

Same NAICS industry code

AR400 and Carbon Steel SupplierThis subcontract agreement establishes a partnership for the supply of industrial-grade steel plates and shapes to prime contractors working on Jefferson Parish Government equipment projects. The scope of work includes the provision of 7 Gauge Carbon Steel for moldboards, AR400 Abrasion Resistant Steel for shoes, and 0.375 inch steel for side plates and support dimensions. The supplier is responsible for delivering these materials as raw or sheared steel plates and beams directly to the fabricator, with a specific requirement to provide material certifications for all AR400 steel. The procurement process is categorized under NAICS code 331210 and is managed by the Jefferson Parish Government in Louisiana. Interested parties must adhere to the timeline associated with the solicitation, which was posted on October 13, 2026, with a response deadline of October 20, 2026.

Jefferson Parish Government

POSTED

about 23 hours ago

DEADLINE

Forging of Pillow Block ComponentsThis subcontract, titled Forging of Pillow Block Components, involves performing forging processes for prime contractors on DLA Weapons Support ASC projects. The primary objective is the creation of raw blanks for pillow block units, which includes the development and maintenance of custom forging dies and tooling to ensure all products meet technical data package specifications. The final deliverables are forged blanks prepared for final machining. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division and will be performed in Corpus Christi, Texas. To be eligible, contractors must hold SAE AS9100 certification and maintain US/Canada Joint Certification Program approval. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026, falling under NAICS code 331210.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Grade Tubing and Fitting SupplyThis subcontract involves the supply of certified raw aerospace tubing and fittings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on sourcing high-strength alloys specifically for part number 532513-16 and delivering these certified raw materials and hardware to the designated fabricator. A critical requirement of the contract is the provision of full material traceability, which must include Mill Test Reports. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Order OEM Division, with performance taking place at Hill AFB. All deliverables must strictly comply with the Buy American Act. The opportunity is categorized under NAICS code 331210, with a response deadline set for October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Aerospace-Grade Nickel Alloy StockThis subcontract involves the supply of aerospace-grade nickel alloy raw material for prime contractors supporting the DLA Weapons Support Maritime Supply Chain under the Department of Defense. The selected provider must deliver certified raw material stock that strictly adheres to the specifications outlined in Drawing NR 53711 7108795 and is required to provide comprehensive Mill Test Reports for all materials supplied. Compliance with the Buy American Act and the Berry Amendment is mandatory for this engagement. The project is categorized under NAICS code 331210, with the place of performance located in Whitehall. Interested parties must submit their responses by the deadline of October 26, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Copper-Nickel Alloy Tubing (Composition 90-10)This subcontract involves the supply of 1,776 feet of Copper Alloy Composition 90-10 tubing for the DLA Weapons Support Nuclear Reactor Program. The required tubing must be in annealed condition, featuring a 0.675 inch outer diameter and a minimum wall thickness of 0.065 inch, and can be provided in either seamless or welded metallic forms. All materials must strictly adhere to military specifications 715 and 706 for Copper-Nickel Alloy, with packaging requirements following MIL-STD-2073-1E. The contract is managed under NAICS code 331210 for the Department of Defense. Finished tubing is to be delivered FOB Origin to DLA Distribution, with the place of performance located in New Cumberland. The solicitation was posted on October 13, 2026, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Aerospace-Grade Metal Tubing SupplyThis subcontract involves the supply of aerospace-grade raw metal tubing to prime contractors for DLA Weapons Support ASC projects, specifically supporting the manufacture of Bell Textron part number 205-060-581-001. The selected provider is responsible for sourcing high-quality alloys and ensuring full material traceability through the provision of comprehensive material certifications and Mill Test Reports. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OR OEM Division, with performance taking place in New Cumberland. Strict adherence to the Buy American Act and the Berry Amendment is required for all delivered stock. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026, falling under NAICS code 331210.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Grade Fastener Stock SupplyThis HUBZone set-aside subcontract, managed by the Department of Defense DLA Weapons Support ASC Commodities Division, involves the supply of aerospace grade fastener stock. The contractor is responsible for providing raw metal stock or pre-formed blanks, specifically high-strength alloys or specialty metals, to prime contractors. All materials must be sourced and certified to meet drawing 8V613 HS6116 specifications as outlined in the Technical Data Package. To ensure regulatory compliance, the supplier must provide Mill Test Reports verifying adherence to the Buy American Act and the Berry Amendment. The scope of work concludes with the delivery of certified raw material stock to the designated manufacturer. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 331210.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

High-Strength Fastener Material SupplierThis subcontract involves the supply of raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The supplier is responsible for providing high-strength steel or aerospace-grade alloys that meet specific metallurgical standards for NSN 5325-01-229-0315. To ensure full traceability and quality assurance, the provider must furnish Material Test Reports and Certificates of Conformance, while maintaining strict DFARS compliance for specialty metals. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract falls under NAICS code 331210. The scope of work includes the delivery of raw material stock directly to the manufacturer, with the place of performance located at Robins Air Force Base. Interested parties must adhere to the response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Aerospace-Grade Valve MaterialsThis subcontract for the Supply of Aerospace-Grade Valve Materials involves providing certified raw materials, specifically metals and alloys, for prime contractors working on DLA Distribution San Joaquin valve assembly projects. All materials must strictly adhere to the specifications outlined in Drawing 80064 1385623 and be delivered with accompanying Material Test Reports and Certificates of Conformance. The contract requires strict adherence to DFARS 252.225-7001 compliance and necessitates JCP certification for the provider to access essential technical data. Performance will take place in Tracy, California, under NAICS code 331210, with a response deadline set for October 26, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Precision Tubing Material SupplyThe Precision Tubing Material Supply subcontract involves the sourcing and delivery of high-tolerance industrial raw tubing materials for prime contractors supporting the DLA Weapons Support Land Supplier Opns Engines. The materials must strictly adhere to NSN 2540015234659 specifications and include Mill Test Reports to verify compliance with the Berry Amendment and the Buy American Act. This Department of Defense project falls under NAICS code 331210 and is performed in Tracy, California. The solicitation was posted on October 13, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Aerospace-Grade Steel TubingThis subcontract involves the supply of aerospace-grade raw steel tubing for prime contractors working on projects for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The scope of work requires the sourcing and certification of steel tubing that adheres to strict alloy and grade specifications for NSN 4710006739816. To ensure compliance with the DLA Master List of Technical and Quality Requirements, the provider must deliver Material Test Reports and Certificates of Conformance along with the certified stock. The opportunity is categorized under NAICS code 331210, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, involves the supply of aerospace-grade raw materials for prime contractors. The materials must strictly adhere to Boeing TDP Rev A specifications and include comprehensive mill test reports. To ensure regulatory compliance, the provider must maintain full supply chain traceability in accordance with DLA Directive C03 and meet all requirements set forth by the Berry Amendment and the Buy American Act. The project is categorized under NAICS code 331210, with the place of performance located in New Cumberland. Interested parties should note that the solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

FAIRING, AIRCRAFT

Solicitation # SPE4A5-27-T-1064

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

CONNECTOR ASSEMBLY

Solicitation # SPE4A5-27-T-1065

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

NRP, TRANSMITTER, PRE

Solicitation # SPE4A5-27-Q-0030

Solicitation SPE4A5-27-Q-0030 is a request for quotations from the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of eight units of NRP, Transmitter, Pre (NSN 6695-01-604-0260). This is designated as a Critical Application Item and must be manufactured in accordance with Military Specification MIL-T-24742 and Technical Data Package Rev B Gen 2. The specific item designation is M24742C-S-52-D-X-DC-A, which specifies a seawater compound pressure gauge/vacuum transmitter with a two-wire DC input power system and milliampere output. The contract is a Firm Fixed Price agreement with a required delivery date of March 31, 2027, and is shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quality assurance is governed by QAP 13873 QAP-B02, with inspection and acceptance occurring at the origin. The contractor must adhere to strict sampling methods per MIL-STD-1916 or ASQ H1331, with a general requirement of zero non-conformances for acceptance. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Award will be based on best value, weighing price, past performance (specifically SPRS assessments and historical quality/delivery), and quoted delivery. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 2 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division, involves providing specialized packaging and marking services for ten Bell Crank units. The work must be performed in San Diego and requires strict adherence to military standards, including MIL-STD-129, RP001, and MIL-STD-2073-1E, utilizing specific preservation methods and MIL-SPEC wrapping and cushioning materials. The contractor is responsible for ensuring all critical defense components are processed according to Preservation Method 41 and Cleaning/Drying 1 with Wrap Material G8. Additionally, the provider must be proficient in using WAWF and AMPS to manage all necessary shipping documentation. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

General Warehousing and Storage

POSTED

DEADLINE

Precision Machining and Fabrication of Bell CranksThis subcontract involves the precision machining and fabrication of ten Bell Crank units for the DLA Weapons Support ASC Supplier OEM Division. The project requires the production of NSN 3040-01-135-1593 assemblies, which are classified as Navy Identified Critical Safety Items. All work must strictly adhere to ASQ H1331 or MIL-STD-1916 standards and be performed in San Diego. To qualify, the contractor must hold SAE AS9100 certification and comply with CMMC Level 2 and DFARS 252.204-7012 cybersecurity requirements. Additionally, all materials must be sourced domestically in accordance with the Berry Amendment. The final deliverable consists of ten completed and inspected units.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

First Article Testing and Quality CertificationThis subcontract, titled First Article Testing and Quality Certification, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The primary objective is to perform First Article Testing for prime contractors to validate the manufacturing process for NSN 1615004067717. The work will be performed in Corpus Christi, Texas, and requires the use of certified Measuring and Test Equipment in accordance with RT001 to ensure full compliance. The scope of work involves close coordination with the DCMA Administrative Contracting Officer and Quality Assurance Representative for in-process verification, culminating in the delivery of a formal First Article Test Report. This opportunity falls under NAICS code 541380, with a response deadline set for October 21, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Machining and Assembly of Pillow Block UnitsThis subcontract involves the precision machining and assembly of 26 Pillow Block units for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed according to Drawing NR 97499-204-011-108, adhering to strict aerospace tolerances. Final deliverables must be marked in accordance with MIL-STD-129 and packaged per MIL-STD-2073-1E. The project is managed under the Department of Defense and will be performed in Corpus Christi, Texas. To be eligible, the contractor must hold SAE AS9100 certification and maintain US/Canada Joint Certification Program approval for CSI items. The response deadline for this requirement is October 21, 2026.

POSTED

DEADLINE

MIL-SPEC Packaging and Delivery for Aircraft ComponentsThis subcontract involves providing specialized packaging and marking services for aircraft components supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for packing components according to MIL-STD-2073-1E standards, specifically utilizing QWP:001 and Pres Mthd:10, while ensuring all marking adheres to MIL-STD-129. Additionally, the scope requires the use of specified cushioning and dunnage materials appropriate for aerospace components and the palletization of shipments in accordance with RP001. The final palletized units must be delivered to DLA Distribution in New Cumberland, Pennsylvania. This requirement falls under NAICS code 333613 and is managed by the Department of Defense. Interested parties should note the response deadline of October 21, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Specialized Inspection and Testing for Aircraft Critical Safety ItemsThis subcontract, titled Specialized Inspection and Testing for Aircraft Critical Safety Items, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will perform quality assurance and testing for prime contractors, specifically focusing on the verification of critical, major, and minor attributes through sampling plans aligned with MIL-STD-1916 or ASQ H1331. All work must be performed using NIST-calibrated Measuring and Test Equipment in accordance with requirement RT001, and the contractor must hold AS9100 or AS9120 certification. The scope of work requires the delivery of detailed inspection reports and certifications of compliance. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 21, 2026, for this opportunity categorized under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

Manufacturing of Aircraft Cargo Rails (CSI)This subcontract involves the manufacturing of seven aircraft cargo rails for the DLA Weapons Support ASC Supplier Oper OEM Division, specifically adhering to Boeing part number 901-020-536-101 specifications. The project requires the delivery of fully completed and inspected units, with a strict prohibition on additive manufacturing unless explicit authorization is granted by the ESA. To qualify, the contractor must maintain AS9100 certification and provide a CMMC Level 2 self-assessment. Additionally, all work must comply with the Buy American Act and the Berry Amendment. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on aerospace projects for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider is responsible for supplying and performing specialized packaging of components in strict accordance with RP001 and ASTM D3951 standards. Additionally, the contractor must ensure all marking and labeling comply with MIL-STD-129 and maintain adherence to the Hazard Communication Standard 29 CFR 1910.1200 to deliver shipments that are fully prepared for transport. The project is categorized under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 21, 2026, following the posting date of October 13, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS