Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturer of Precision Washers (NSN 5310LN0020789)

Active

Federal

Response Deadline10/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 14 units of 0.070 washers for prime contractors supporting the DLA Fleet Readiness Center Southeast in Jacksonville. The parts must be fabricated according to Drawing 152B2055 Revision E using stamping or precision machining. Compliance with the Buy American Act is required, and the manufacturer must hold either ISO 9001 or SAE AS9003 certification. Quality control must adhere to MIL-STD-1916 or ASQ H1331 sampling standards, with marking and labeling following MIL-STD-129 and MIL-STD-130N. The final deliverable consists of 14 fully inspected and packaged washers. This opportunity falls under NAICS code 332721 and is managed by the Department of Defense.

General Info

Agency

Department Of Defense → DLA FLEET READINESS CENTER SOUTHEAST

NAICS

332721 - Precision Turned Product Manufacturing

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPEFA3-27-T-0017.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER, 0.070

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 20

Submission deadline

Response Deadline

10/20/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA FLEET READINESS CENTER SOUTHEAST

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA FLEET READINESS CENTER SOUTHEAST

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 14 units of 0.070 washers for prime contractors on DLA Fleet Readiness Center Southeast projects. Fabricates parts per Drawing 152B2055 Revision E using precision machining or stamping. Implements quality sampling per MIL-STD-1916 or ASQ H1331 and marking per MIL-STD-129 and MIL-STD-130N. Requires SAE AS9003 or ISO 9001 certification and Buy American Act compliance. Delivers 14 inspected and packaged washers.

Similar Contracts

Same NAICS industry code

Manufacture and Supply of NAS6620-64 Shear Bolts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Critical Application Shear Bolts (NAS6705AL7)This subcontract involves the manufacture of 379 high-precision critical application shear bolts, specifically NSN 5306-01-273-2272, for the DLA Weapons Support ASC Commodities Division. Production must strictly adhere to NAS6703 through NAS6720 and TDP Rev D Gen 4 standards, with a specific prohibition against the use of additive manufacturing. All finished units must be packaged according to ASTM D3951 and MIL-STD-129 guidelines. To qualify, manufacturers must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with the Buy American Act and the Berry Amendment. The project falls under NAICS code 332721, with performance located in New Cumberland. Interested parties must respond by October 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Manufacturing of Retaining RingsThis subcontract opportunity with the Department of Defense DLA Weapons Support ASC Commodities Division involves the precision manufacturing of 2,585 retaining rings under NSN 5325010320946. The production must adhere to MIL-DTL-1183/10B(2) Revision B specifications and utilize a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331. All materials used must be free of mercury, and the manufacturer is required to utilize precision machining equipment. To be eligible, the manufacturer must hold certification in either SAE AS9003 or ISO 9001. The project is categorized under NAICS code 332721, with the place of performance located in Bremerton, Washington. Interested parties must respond by October 20, 2026, to provide the finished retaining rings as specified.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Aerospace Washer ManufacturingThis subcontract for the Department of Defense DLA Weapons Support ASC Commodities Division involves the manufacture of 30 high-precision Key Washers under NSN 5310002787014. The project requires strict adherence to SAE AS172201 through AS172235B Revision B and SAE AS478 Revision N standards. Performance will be measured by a zero non-conformance requirement per MIL-STD-105/ASQ Z1.4, with sampling conducted according to MIL-STD-1916 or ASQ H1331. The selected provider must utilize precision machining equipment and maintain full compliance with DFARS 252.204-7012 regulations. Work is to be performed in Jacksonville, Florida. Interested parties must respond by October 20, 2026, regarding this aerospace manufacturing opportunity categorized under NAICS code 332721.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machining/Manufacturing of Pin-Rivet CollarsThis subcontract involves the manufacture of 1,542,000 pin-rivet collars for prime contractors supporting the DLA Weapons Support ASC Commodities Division. Production must strictly adhere to Reference Drawing NR 30003 1213AS630, Revision B, utilizing either cold-forming or precision CNC machining, as additive manufacturing is explicitly prohibited. All finished components must be compliant with the Berry Amendment and delivered to Tinker AFB. To qualify, the manufacturer must maintain SAE AS9003 or ISO 9001 quality systems and hold certification under the US/Canada Joint Certification Program for ITAR and EAR compliance. The project falls under NAICS code 332721 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Machine Bolt Supplier (NSN 5306-00-097-7307)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturer of Straight Headless Pins (NSN 5315-01-649-7012)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Machine Bolts (NSN 5306-01-359-2284)This subcontract involves the manufacture and delivery of 30 machine bolts for prime contractors supporting the DLA Weapons Support Aviation Supply Chain. The components must be produced in strict accordance with NSN 5306-01-359-2284 and RA001 technical requirements. Quality control must adhere to MIL-STD-1916 or ASQ H1331 standards, while packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. To be eligible, the manufacturer must hold SAE AS9003 or ISO 9001 certification, maintain US/Canada Joint Certification Program approval, and demonstrate CMMC Level 2 compliance. The project falls under NAICS code 332721, with the place of performance located in New Cumberland. Interested parties must respond by October 20, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Precision Machine Bolt Fabrication (NSN 5306-00-803-7108)This subcontract involves the fabrication of 1,710 high-precision machine bolts for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The components must be manufactured according to specification MS9146B and reference drawing 13873 EI-008037108, with bare item marking performed in accordance with RQ017 and MIL-HDBK-57. Performance will take place at Tinker AFB. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems and provide a CMMC Level 2 self-assessment. Additionally, all materials used in production must strictly comply with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is October 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Shoulder Bolts (NSN 5306011440948)This subcontract involves the supply of seven precision-manufactured shoulder bolts under NSN 5306011440948 for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing the bolts using precision machining equipment while ensuring strict adherence to MIL-STD-1916 or ASQ H1331 sampling standards. Additionally, the use of mercury compounds is strictly prohibited in the production process. The contract requires specific packaging compliance according to RP001, MIL-STD-129, and MIL-STD-2073-1E. Delivery is designated as FOB Origin to DLA Distribution San Joaquin in Tracy, California. This procurement falls under NAICS code 332721 and was posted on October 12, 2026, with a response deadline of October 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Straight Headed Pins (NSN 5315014184515)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machining of Headless Shoulder PinsThis subcontract involves the precision machining and fabrication of four headless shoulder pins, identified by NSN 5315-01-500-7711, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work requires the use of CNC lathes or grinding equipment to meet strict tolerances defined in the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332721. The contractor must maintain US/Canada Joint Certification Program certification and ensure strict adherence to DFARS 252.204-7012. Quality assurance must be validated through compliance with either MIL-STD-1916 or ASQ H1331 sampling plans. The solicitation was posted on October 12, 2026, with a response deadline of October 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER SOUTHEAST

Same awarding agency

Supply of Aviation Insulators (NSN 1680LN0033444)This subcontract involves the supply of 26 specialized aviation insulators for prime contractors supporting the DLA Fleet Readiness Center Southeast in Jacksonville. The contractor is responsible for manufacturing or sourcing units that strictly adhere to NSN 1680LN0033444 specifications and the DLA Master List technical requirements. Rigorous quality and compliance standards are mandated, including quality assurance per MIL-STD-1916 or ASQ H1331 and packaging and labeling according to ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N(1). Additionally, the provider must maintain NIST SP 800-171 compliance to ensure the security of controlled unclassified information.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Supply of Trelleborg Conde F0235 SealsThis subcontract involves the procurement of five Trelleborg Sealing Solutions Conde F0235 seals, specifically part number 132-95X3-53Z109A with NSN 5330LN0035585, for prime contractors supporting the DLA Fleet Readiness Center Southeast. The items must be delivered FOB Destination to DLA Distribution Jacksonville. The supplier is required to adhere to strict technical and regulatory specifications, including ASTM D3951 standards and the Buy American Act. Packaging must comply with MIL-STD-129, while quality assurance must meet MIL-STD-1916 or ASQ H1331 standards. The opportunity is categorized under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Aviation Gaskets (NSN 5330-LN-003-5593)This subcontract involves the supply of nine specialized aviation gaskets, specifically NSN 5330-LN-003-5593 or Eaton Aeroquip part number C11604-20-B, for prime contractors supporting the DLA Fleet Readiness Center Southeast. The project requires the manufacturer or source to deliver the completed units FOB Destination to Jacksonville, Florida. Strict quality and compliance standards are mandatory, requiring the provider to hold ISO 9001 or SAE AS9003 certification. Quality assurance must be performed according to SAE AS9003 or ISO 9001 standards, utilizing zero-based sampling per MIL-STD-1916. Additionally, all items must be packaged in accordance with ASTM D3951 and MIL-STD-129 specifications.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Aerospace Gasket Supplier (NSN 5330LN0035636)

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Safran Power Units O-Rings

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Supply of Aviation Screws (NSN 5305LN0034760)This subcontract involves the procurement or manufacture of 32 specialized aviation screws for the DLA Fleet Readiness Center Southeast. The required components must match NSN 5305LN0034760 and Part Number S107-05-06, with approved sourcing from either LFC Industries Inc. or British Aerospace Military. All items must be delivered FOB Destination to Jacksonville, Florida. Strict adherence to quality and packaging standards is required, specifically MIL-STD-1916 or ASQ H1331 for quality assurance, and ASTM D3951 and MIL-STD-129 for packaging. The project falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Manufacturer/Supplier of Critical Application Seals (NSN 5331LN0035594)This subcontract involves the manufacture or procurement of three critical application seals, identified as NSN 5331LN0035594, to support prime contractors for the DLA Fleet Readiness Center Southeast. The selected supplier must utilize quality systems that comply with SAE AS9003 or ISO 9001 standards. Additionally, all units must undergo inspection according to MIL-STD-1916 or ASQ H1331 and be packaged in accordance with ASTM D3951 and RP001 guidelines. The contract requires strict adherence to the Buy American Act. Final delivery of the three units is to be made to DLA Distribution in Jacksonville, Florida. The opportunity is categorized under NAICS code 339999, with a response deadline set for October 20, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Aviation O-Ring Gaskets (NSN 5331LN0035620)

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Supply of Aviation Seals (NSN 5330LN0035586)This subcontract involves the procurement of five specialized aviation seals under NSN 5330LN0035586 for the DLA Fleet Readiness Center Southeast. The contractor is responsible for manufacturing or sourcing these units in strict accordance with DLA Master List requirements RA001, RP001, and RQ017. All materials must comply with the Buy American Act and Berry Amendment standards to ensure domestic sourcing compliance. The project requires adherence to specific quality and logistics standards, including packaging per ASTM D3951 and MIL-STD-129, and sampling according to MIL-STD-1916 or ASQ H1331. Delivery of the five units is designated as FOB Destination to Jacksonville, Florida. This effort falls under NAICS code 339999 and supports prime contractors on Department of Defense aviation projects.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Aerospace Clamps (NSN 5325LN0035560)This subcontract involves the procurement of three specialized aerospace clamps, identified by NSN 5325LN0035560 and Dunlop Aerospace Ltd. part number BA80707-1, for the DLA Fleet Readiness Center Southeast. The supplier is responsible for sourcing or manufacturing these components without the use of hexavalent chromium, ensuring strict adherence to quality standards with zero non-conformances permitted under MIL-STD-1916 or ASQ H1331. The contract requires specific compliance with ASTM D3951 for packaging and MIL-STD-129 for marking. All units must be delivered FOB Destination to Jacksonville, Florida. This requirement falls under NAICS code 423840 and is managed by the Department of Defense.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Safran Power Unit O-Rings (NSN 5331LN0035619)

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Solicitation # SPEFA3-27-T-0009

Solicitation SPEFA3-27-T-0009 is a federal procurement issued by the DLA Aviation office in Jacksonville, Florida, for the acquisition of nine gaskets, identified by NSN 5330-LN-003-5593 and Eaton Aeroquip LLC part number C11604-20-B. This item is designated as a critical application item with no shelf life requirement. The contract specifies a delivery timeline of 84 days after order, with an original required delivery date of October 8, 2026. Terms are FOB Destination, with both inspection and acceptance occurring at the destination point in accordance with FAR 52.246-2. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, while ensuring compliance with the DLA Master List of Technical and Quality Requirements and RP001 for palletization. Quality assurance requires a manufacturer inspection system complying with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and safeguarding of covered defense information. Item Unique Identification is not required for this procurement.

Other Support Activities for Air Transportation

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS