Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturer of Self-Locking Nuts with Extended Washers

Open

Federal

Response Deadline11/17/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 113 self-locking nuts with extended washers, identified by NSN 5310-00-810-1786, for prime contractors supporting DLA Weapons Support ASC projects. The components must be produced in accordance with technical standard NASM21042 Revision 3 and meet Navy Identified Critical Safety Item requirements. Performance will take place at Robins Air Force Base. The contractor must maintain an SAE AS9100 compliant Quality Management System and strictly adhere to domestic sourcing mandates under the Berry Amendment and Buy American Act. Additionally, all units must be marked according to MIL-STD-129 and packaged per MIL-STD-2073-1E. Responses for this requirement are due by November 17, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-3620.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, SELF-LOCKING, EX

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 10

subcontract

Response DeadlineNov 17

Submission deadline

Response Deadline

11/17/2026, 12:00:00 PM ESTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies self-locking nuts with extended washers for prime contractors on DLA Weapons Support ASC projects. Manufactures nuts to technical standard NASM21042 Revision 3 and Navy Identified Critical Safety Item (CSI) requirements. Adheres to Berry Amendment and Buy American Act domestic sourcing. Performs marking per MIL-STD-129 and packaging per MIL-STD-2073-1E. Requires SAE AS9100 compliant QMS. Delivers 113 units of NSN 5310-00-810-1786.

Similar Contracts

Same NAICS industry code

Precision Screw Fabrication (NSN 5305-01-122-2830)This subcontract involves the fabrication of 38 precision screws, part number 99136454, for the DLA Weapons Support ASC Commodities Division. The project requires the use of CNC equipment to perform precision machining according to OEM drawings. All materials must be mercury-free in compliance with NAVSEA requirements, and the final delivery must meet a zero non-conformance standard per MIL-STD-105/ASQ Z1.4. Quality control must be maintained through inspection systems adhering to SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 17, 2026, regarding this requirement under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Loop Clamps (NSN 5340-01-385-0207)This subcontract involves the manufacture and supply of 93 loop clamps under NSN 5340-01-385-0207 for the DLA Weapons Support Land Supply Chain. The project requires the use of precision machining and materials that comply with the Berry Amendment, ensuring all units meet the technical requirements specified in the DLA Master List. Performance will take place at Robins Air Force Base. To qualify and maintain the contract, the provider must adhere to RA001 quality standards and maintain NIST SP 800-171 cybersecurity compliance. The final deliverable consists of 93 finished and inspected loop clamps. The solicitation was posted on November 10, 2026, with a response deadline of November 20, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Plain Hexagon Nuts (NSN 5310-01-166-6393)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the manufacture and delivery of 1,040 plain hexagon nuts under NSN 5310-01-166-6393. The project is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place in Texarkana. Production must strictly adhere to TDP Rev A Gen 1, QAP 19207, and the DLA Master List of Technical and Quality Requirements. To qualify, contractors must utilize precision machining equipment and maintain specific security and regulatory certifications, including CMMC Level 2 compliance and certification under the US/Canada Joint Certification Program for export control. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Socket Head Cap Screw Supplier (NSN 5305005504246)This subcontract involves the supply of 33 socket head cap screws for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these critical application fasteners according to NSN 5305005504246 specifications, with a strict prohibition on the use of additive manufacturing. Performance will take place at Tinker AFB. The contractor must ensure strict adherence to quality assurance standards MIL-STD-1916 or ASQ H1331, as well as compliance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. All deliveries must be accompanied by a Certificate of Quality Compliance to verify that the fasteners meet the necessary requirements for critical application.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of NAS1149 Flat WashersThis subcontract involves the manufacture and supply of 2,597 finished flat washers, identified by NSN 5310-01-499-8065, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be produced according to Basic Non-Govt Std NAS1149 Revision 8 using casting or forging processes, as additive manufacturing is strictly prohibited. All deliverables must be packaged in accordance with MIL-STD-2073-1E and delivered to Tracy, California. To qualify, the supplier must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act. Quality assurance requires the implementation of zero-based sampling per MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-00-942-2196)This subcontract involves the supply of 185 units of hexagon head cap screws, identified by NSN 5305-00-942-2196, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing the screws in strict accordance with ASME B18.2.1 and TDP Rev C Gen 3 standards. Quality assurance must be performed per Reference QAP 13873, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Additional requirements include adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. The provider must maintain compliance with DFARS cybersecurity regulations and the Buy American Act. Performance for this Department of Defense project is centered in Albany, and the response deadline for the solicitation is November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Turnlock Fastener Receptacle SupplierThis subcontract involves the manufacture or sourcing of 3,931 turnlock fastener receptacles for prime contractors supporting the DLA Weapons Support ASC. The components must strictly adhere to NSN 5325-00-290-3976 and Boeing P/N 3D0103-1 specifications, with a mandatory requirement that all materials be mercury-free. Quality control sampling must be implemented according to MIL-STD-1916 or ASQ H1331 standards. Logistical requirements specify that items be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. The final delivery of units is designated as FOB Origin to DLA Distribution Warner Robins. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacture of NAS1352 Socket Head Cap ScrewsThis subcontract involves the manufacture of 20 high-precision socket head cap screws, specifically NSN 5305-01-436-2513, for the DLA Weapons Support ASC Commodities Division. The production must strictly adhere to the NAS1352 part standard using precision CNC machining and materials that comply with the Buy American Act. Quality assurance is a critical component of the agreement, requiring sampling per MIL-STD-1916 or ASQ H1331 with a mandate for zero non-conformances. The final delivery consists of the 20 finished units accompanied by a certification of conformance. Performance for this project is centered in San Diego, California.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacturer of Self-Locking Nuts with Extended Double WashersThis subcontract involves the manufacture and supply of 318 self-locking nuts with extended double washers for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the production of NSN 5310012067289 in strict accordance with the DLA Master List of Technical and Quality Requirements and the Buy American Act. Performance will take place at Tinker AFB, with finished fasteners delivered FOB Origin. To ensure quality for these critical application items, the manufacturer must maintain ISO 9001:2015 inspection systems and adhere to sampling standards per MIL-STD-1916 or ASQ H1331. The opportunity was posted on November 10, 2026, with a response deadline of November 17, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacturer of Flat Washers (NSN 5310-01-471-9037)This subcontract involves the manufacture and supply of 3,572 flat washers under NSN 5310-01-471-9037 for prime contractors supporting The Boeing Company via the DLA Weapons Support ASC Supplier Oper OEM Division. The components must be produced using precision stamping or machining and must strictly adhere to the DLA Master List of Technical and Quality Requirements (RA001). The contractor is responsible for ensuring all units meet quality inspection standards per MIL-STD-1916 or ASQ H1331, with packaging and marking following ASTM D3951 and MIL-STD-129 respectively. Performance will take place in New Cumberland, and the finished goods are to be delivered FOB Destination.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Socket Head Cap Screw Manufacturing (NSN 5305-01-453-4054)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the manufacture and delivery of 1,109 socket head cap screws under NSN 5305-01-453-4054. The hardware must be produced in accordance with Basic Drawing NR 53711 6404610 Revision C and Reference QAP 138. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place in Tracy, California. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems and meet CMMC Level 2 security standards. Additionally, access to ITAR/EAR data requires certification through the US/Canada Joint Certification Program. The final deliverable consists of 1,109 inspected and accepted screws to support prime contractors on DLA projects.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacturing and Supply of Clip-On Nuts (NSN 5310-01-056-4300)This subcontract involves the manufacture and supply of 265 clip-on nuts meeting NSN 5310-01-056-4300 specifications for the DLA Weapons Support ASC Commodities Division. The contractor must ensure all materials are free of hexavalent chromium and fully compliant with the Buy American Act. Deliverables include the full quantity of units plus one First Article Test unit, all packaged according to ASTM D3951 and MIL-STD-129 standards for performance at Hill AFB. To qualify, the provider must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. Additionally, personnel are required to have completed ITAR and EAR training. This requirement falls under NAICS code 332722 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and final delivery preparation for 13 units, ensuring all items are packaged and labeled for FOB Origin shipment. Performance takes place in New Cumberland, Pennsylvania, under NAICS code 488510 for the Department of Defense. Technical requirements mandate strict adherence to RP001, MIL-STD-129, and MIL-STD-2073-1E standards. The contractor must utilize MIL-SPEC packaging materials and labeling equipment, specifically employing preservation method 33 and wrap material GB. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

Special Shaped Spacer ManufacturingThis subcontract involves the manufacture of 13 Special Shaped Spacers, identified by NSN 5365-01-675-9007, for prime contractors supporting DLA Weapons Support ASC projects. The work requires precision machining in strict accordance with Basic Drawing NR 53711 7124771, Revision B, and explicitly prohibits the use of additive manufacturing. The final deliverable consists of 13 finished and inspected spacers. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality systems, CMMC Level 2 compliance, and certification under the US/Canada Joint Certification Program. The project falls under NAICS code 332710 and is managed by the Department of Defense. Performance of the contract is located in New Cumberland, Pennsylvania.

POSTED

about 7 hours ago

DEADLINE

Precision Manufacturing of Aircraft Fairings (NSN 1560-01-339-9721)This subcontract involves the precision manufacturing of 18 aircraft fairings under NSN 1560-01-339-9721 for the Department of Defense, specifically the DLA Weapons Support ASC. The contractor is responsible for fabricating parts according to Boeing Restricted Technical Data Package and Reference Drawing NR 81205 using BAC specifications, with attribute verification performed per MIL-STD-1916 or ASQ H1331. Performance will take place at Tinker AFB. To be eligible, the provider must maintain JCP certification, ITAR/EAR approval, and a quality system certified to SAE AS9003 or ISO 9001 standards. The scope of work includes the complete fabrication, packaging, and delivery of the finished fairings. The response deadline for this opportunity is November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division. The project involves performing specialized surface treatments and coatings on aircraft structural components to ensure essential corrosion resistance. All work must be executed in strict accordance with reference drawings BAC5300 and BAC5307, with final delivery consisting of finished plates featuring aerospace-grade treatments. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place at Tinker AFB. To be eligible, contractors must maintain NADCAP accreditation and ISO 9001:2015 certification. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 7 hours ago

DEADLINE

Supply of Aerospace Grade Raw Material for Structural PlatesThis subcontract involves the supply of aerospace grade raw material billets or sheets for prime contractors working on DLA Weapons Support ASC projects. The selected provider must source materials that strictly adhere to the alloy and temper requirements specified in Drawing 81205 39-10779 and ensure full material traceability through the provision of Mill Test Reports. All materials must be delivered directly to the fabrication facility and comply with the Buy American Act. The opportunity is a total small business set-aside under NAICS code 331315 for the Department of Defense. Performance will take place at Tinker AFB, and the response deadline for this requirement is November 17, 2026.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 7 hours ago

DEADLINE

Manufacture of Structural Aircraft Plates (P/N 39-10779-34)This subcontract involves the precision machining and fabrication of 296 structural aircraft plates, part number 39-10779-34, for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed using CNC machining in strict accordance with Basic Drawing NR 81205 39-10779 Revision E and TDP Revision C Gen 4. The final deliverable consists of 296 inspected and accepted plates, with quality control requiring the implementation of zero-based sampling per H1331. The project is a total small business set-aside under NAICS code 336413, with performance located at Tinker AFB. To be eligible, contractors must maintain CMMC Level 2, ISO 9001:2015, and ITAR/EAR compliance. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Aerospace Grade Material SupplyThis subcontract, titled Aerospace Grade Material Supply, involves the provision of raw aerospace-grade metal stock for prime contractors supporting DLA Weapons Support ASC projects. The scope of work specifically requires the delivery of certified raw material stock for part number 35-13212-14, as detailed in Drawing 81205 35-13212. To ensure compliance with Department of Defense standards, the supplier must provide full traceability through material certifications and Mill Test Reports. The contract is managed by the DLA Weapons Support ASC Supplier OE and AF Div under NAICS code 331210, with the place of performance located at Tinker AFB. The solicitation was posted on November 10, 2026, with a response deadline set for November 17, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 7 hours ago

DEADLINE

NADCAP Approved Special Process FinishingThis subcontract, titled NADCAP Approved Special Process Finishing, involves performing specialized processing for prime contractors on DLA Weapons Support ASC projects. The scope of work includes heat treating, plating, anodizing, or non-destructive testing on aircraft channels in accordance with Drawing 20145214. All processed components must be delivered with the required certifications of compliance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. To be eligible, contractors must hold NADCAP approval for the specific process being performed and obtain ITAR/EAR data access approval. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 7 hours ago

DEADLINE

Aircraft Channel Fabrication and MachiningThis subcontract involves the fabrication and machining of 46 aircraft channels, part number 35-13212-14, for the Department of Defense under the DLA Weapons Support ASC. Production must strictly adhere to Reference Drawing NR 81205 35-13212 Revision B and TDP Rev B Gen 5. The manufacturing process requires the use of CNC machining and precision M&TE per RT001, while the use of additive manufacturing is explicitly prohibited. The selected contractor must maintain several critical certifications, including JCP certification, ISO 9001:2015, CMMC Level 2, and NIST SP 800-171. Performance will take place at Tinker AFB, and the final deliverable consists of 46 finished and inspected aircraft channels. The response deadline for this opportunity is November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Nonmetallic Bushing Manufacturing and SupplyThis subcontract involves the manufacture and supply of 144 certified nonmetallic bushings for prime contractors supporting the DLA Weapons Support ASC. The required parts must match Amphenol P/N 10-40814-7 or Rolls-Royce P/N 6720944. All deliverables must adhere to strict quality and packaging standards, specifically sampling per MIL-STD-1916 or ASQ H1331 and packaging per MIL-STD-2073-1E. Eligible providers must hold US/Canada Joint Certification Program certification and maintain compliance with DFARS 252.204-7012. The performance of the contract is centered in Tracy, California, under NAICS code 336413. Responses to this solicitation are due by November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized military packaging and marking to ensure all items meet MIL-STD-2073-1E and MIL-STD-129 standards. Additionally, the contractor is responsible for executing palletization according to RP001 and maintaining strict compliance with IP056 mercury restrictions to deliver shipment-ready units for First Destination Transportation. The opportunity is a Total Small Business Set-Aside under NAICS code 488510, managed by the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance will take place at FPO 96678. Interested parties must respond by November 17, 2026.

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

Supply of Communication Equipment Interface Unit (NSN 5895-01-678-7840)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, requires the delivery of one Interface Unit for communication equipment intended for prime contractors. The specific hardware required is identified by NSN 5895-01-678-7840 and Part Number 280265-02. The project is categorized under NAICS code 334220 and is designated as a Total Small Business Set-Aside. Strict technical compliance is mandatory, including a prohibition on additive manufacturing and a requirement that the unit be free of mercury per IP056. Additionally, the supplier must perform bare item marking in accordance with RQ017. The contract was posted on November 10, 2026, with a response deadline of November 17, 2026, and the place of performance is listed as FPO 96678.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacture and Supply of Set Screws (NSN 5305-01-481-3419)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacture of Self-Locking Hexagon Nuts (NSN 5310-00-982-6808)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Specialized Hexagon Head Cap Screw Manufacturer

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supplier of Blind Rivets (NSN 5320-01-690-6902)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Plain Studs (NSN 5307011486832)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacturer of Critical Application Self-Locking Hexagon Nuts (NSN 5310-01-503-5887)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Machining/Manufacturing of Screw Thread Inserts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Socket Head Cap Screw Supplier (NSN 5305009572394)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Plain Square Nut Manufacturing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Self-Locking Hexagon Nuts

ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of Self-Locking Plate Nuts (NSN 5310-01-332-8207)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Machining/Manufacturing of Critical Application Flat Washers

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS