Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacturing and Assembly of Servocylinder (CSI)

Active

Federal

Response Deadline10/23/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and assembly of high-precision servocylinders, identified by NSN 6615-01-651-6038, for prime contractors supporting DLA Aviation projects under the Department of Defense. The scope of work includes precision CNC machining and assembly, with the final product classified as a Critical Safety Item. Consequently, all work must adhere to strict aviation safety standards to ensure operational reliability. To qualify, the contractor must maintain ISO 9000 certification, ensure compliance with SPRS risk assessments, and possess a fully equipped calibration laboratory. The successful provider is responsible for delivering completed, warranted servocylinder units. This opportunity was posted on October 8, 2026, with a response deadline of October 23, 2026, falling under NAICS code 333995.

General Info

Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

NAICS

333995 - Fluid Power Cylinder and Actuator Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA127QRA14.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SERVOCYLINDER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 08:30:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and assembles a high-precision servocylinder (NSN 6615-01-651-6038) for prime contractors on DLA Aviation projects. Performs precision CNC machining and assembly of the unit as a Critical Safety Item (CSI) per aviation safety standards. Requires ISO 9000 certification, SPRS risk assessment compliance, and calibration laboratory equipment. Delivers the completed, warranted servocylinder unit.

Similar Contracts

Same NAICS industry code

48--ACTUATOR,ELECTRO-ME - AND OTHER REPLACEMENT PARTS

Solicitation # SPRMM126QRA26

DLA Maritime Mechanicsburg is seeking qualified suppliers for two electro-mechanical actuators, requiring 150 units with NSN 7HH 4810 016044064 PP and part number 845-7526223-4, and 80 units with NSN 7HH 4820 016434099 and part number 4404036-2. The only approved design cage code for these items is HONEYWELL INTERNATIONAL INC (CAGE 59364), and non-OEM suppliers must provide complete traceability documentation proving the material’s origin back to the original manufacturer with their submission; failure to do so will result in a non-responsive offer. Interested parties must complete and return the attached market survey via email to Shane.Wisor@dla.mil no later than 3:00 PM EST on July 24, 2026. This notice is strictly informational and does not constitute a solicitation, request for proposal, or any commitment from the government; no funds are available for response preparation, and all submissions are voluntary with no obligation for the government to award a contract based on the responses received.

SPRMM1 DLA Mechanicsburg

POSTED

about 6 hours ago

DEADLINE

Nonmetallic Hose Assembly FabricationThis subcontract involves the fabrication of nonmetallic hose assemblies for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The manufacturer must produce assemblies in strict accordance with Basic Drawing NR 53711 6743984 Rev B and associated reference drawings. Key technical requirements include full compliance with NAVSEA 5100-003D mercury-free standards and a strict prohibition on the use of additive manufacturing. To qualify, the contractor must maintain JCP certification for handling export-controlled data and hold a quality system certification in either SAE AS9003 or ISO 9001. The scope of work concludes with the delivery of fully completed and inspected hose assemblies. Performance for this project is centered in Tracy, California, with a response deadline set for October 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supplier for Linear Actuating Cylinder Component (P/N 403647)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supplier for Linear Actuating Cylinder Component (P/N 403645)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CYLINDER ASSEMBLY, ACTU

Solicitation # SPE7L3-27-T-0336

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

ACCUMULATOR, HYDRAULIC

Solicitation # SPE7L3-27-T-0252

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Fluid Filter Element SupplyThis subcontract opportunity is for the supply of up to 101 fluid filter elements to support prime contractors under the DLA Weapons Support Maritime Supply Chain. The selected provider must source or manufacture elements matching NSN 4330000000145 and ensure all product marking strictly adheres to MIL-STD-129. Items must be packaged for Government-Arranged Transportation via the First Destination Transportation program. Managed by the Department of Defense, this requirement is designated as a Total Small Business Set-Aside under NAICS code 333995. Interested parties must submit their responses by October 21, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Fluid Filter Elements (NSN 4330005863322)This subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, requires the manufacture or sourcing of 31 fluid filter elements under NSN 4330005863322. The contract is designated as a Total Small Business Set-Aside under NAICS code 333995. The selected provider must ensure all units are packaged and palletized in strict accordance with MIL-STD-2073-1E and RP001 standards. Delivery of the completed units is required FOB Origin within 46 days of the order. The response deadline for this opportunity is October 21, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Load Sensing Piston Pump SupplierThis subcontract involves the supply of load sensing piston pumps for prime contractors working on Texas Department of Transportation central hydraulic system projects. The required pumps must feature 5.98 cubic inches per revolution displacement, 2-1/2-inch split flange suction ports, and 1-inch split flange pressure ports, all while adhering to SAE standards. To be eligible, the supplier must be an authorized dealer or distributor. The contract requires the delivery of 237 units FOB destination to Austin, Texas. Interested parties should note that the response deadline is October 27, 2026, and the opportunity is categorized under NAICS code 333995.

Texas Department Of Transportation

POSTED

DEADLINE

Supply of Hydraulic Accumulator Cylinders (NSN 2590014537423)This subcontract with the Department of Defense Strategic Acquisition Program Directorate involves the manufacture or procurement of 304 specialized hydraulic accumulator cylinders. The contract specifically requires the delivery of NSN 2590014537423, associated with part number BBD17366 and CAGE code 3AR59, to support prime contractors. The supplier must ensure all units adhere to strict Critical Application Item quality and safety standards. This procurement falls under NAICS code 333995, with a response deadline set for October 20, 2026.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Hydraulic Accumulator Cylinder FabricationThis subcontract, titled Hydraulic Accumulator Cylinder Fabrication, involves the manufacture of hydraulic accumulator cylinders for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes the fabrication, assembly, and precision CNC machining of cylinder bodies and internal components in strict accordance with Basic Drawing NR 45681 1456-512544, Revision P, utilizing high-pressure sealing materials to ensure operational integrity. The contract is designated as a Total Small Business Set-Aside under NAICS code 333995 and is managed by the Department of Defense. A critical requirement for this engagement is full compliance with the DFARS 252.225-7001 Buy American and Balance of Payments Program. The project was posted on October 5, 2026, with a response deadline of October 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Safety Relief Valves (NSN 4820005915331)This subcontract opportunity is a Women-Owned Small Business set-aside for the manufacture or procurement of 16 Safety Relief Valves under NSN 4820005915331. Supporting DLA Land and Maritime projects for the Department of Defense at Hill AFB, the contract permits the use of approved additive manufacturing methods. All units must be packaged and labeled in strict accordance with RQ001, ASTM D3951, and MIL-STD-129 standards. To be eligible, contractors must maintain CMMC Level 2 certification and participate in the US/Canada Joint Certification Program to handle ITAR and EAR regulated data. The solicitation was posted on October 5, 2026, with a response deadline of October 16, 2026. The primary objective is the delivery of 16 fully compliant, packaged, and labeled valves.

POSTED

DEADLINE

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

MIL-SPEC Aerospace Packaging and CratingThis subcontract for MIL-SPEC Aerospace Packaging and Crating supports prime contractors on DLA Aviation projects through the Department of Defense. The scope of work involves providing specialized preservation, packaging, and marking services, specifically including the fabrication of Level A and B exterior shipping containers and the application of military marking labels. A primary deliverable is the provision of a fully packed, marked, and palletized rudder available for FOB Origin pickup. To ensure aerospace quality and safety, all work must adhere to strict regulatory standards, including MIL-STD-129, MIL-STD-2073-1, ASTM D3951-18, ANSI/ESD S20.20-2021, and MIL-STD-147, with a specific requirement for ESD protection. The opportunity is managed by the Pa DLA Aviation office in Philadelphia under NAICS code 488410, with a response deadline set for October 19, 2026.

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Aerospace Oxygen System CleaningThis subcontract for Aerospace Oxygen System Cleaning involves performing specialized precision cleaning on rudder components for prime contractors supporting DLA Aviation projects. The primary objective is the removal of contaminants to ensure components are safe for oxygen-rich environments, utilizing a process that includes chemical baths, ultrasonic cleaners, and particulate testing equipment. All work must strictly adhere to MIL-STD-1330 standards for the precision cleaning and testing of shipboard and aircraft oxygen, helium, and nitrogen systems to deliver certified Oxygen Clean components. Managed by the Department of Defense through Pa DLA Aviation At Philadelphia, the opportunity falls under NAICS code 336414. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026.

Guided Missile and Space Vehicle Manufacturing

POSTED

about 6 hours ago

DEADLINE

Aircraft Rudder Manufacturing (NSN 1560-01-457-6482)This subcontract involves the manufacture and assembly of a complete aircraft rudder assembly under NSN 1560-01-457-6482 for prime contractors supporting DLA Aviation at Philadelphia. The scope of work includes the precision fabrication of aircraft control surfaces, specifically the assembly of internal ribs, spars, and skin using aerospace-grade alloys, composites, and precision jigs. The project requires strict adherence to CSI quality controls, NAVAIR Program Office variance compliance, and IUID registration to ensure all aerospace standards are met. The final deliverable is one completed aircraft rudder assembly. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Aviation projects for the Department of Defense. The selected provider will be responsible for the specialized packaging, marking, and labeling of aircraft trim tabs to ensure they are ready for shipment. All work must be performed using compliant packaging materials and specialized UID marking equipment. Strict adherence to military standards is required, specifically MIL-STD-2073 and SPI 8013211598 for packaging, MIL-STD-129 for marking, and MIL-STD-130 for unique identification. Consequently, the contractor must hold certifications in all three of these military standards to qualify for the performance of these services.

Other Airport Operations

POSTED

about 6 hours ago

DEADLINE

Aircraft Trim Tab Fabrication (NSN 1560-01-455-9797)This subcontract involves the manufacture and supply of aircraft trim tabs, identified by NSN 1560-01-455-9797, for prime contractors supporting DLA Aviation projects. The contractor is responsible for fabricating parts using precision machining and aerospace-grade materials in strict accordance with reference number 70974 123CS11805-507. The project demands rigorous compliance with Critical Safety Item quality standards and NAVAIR Program Office variance protocols. Additionally, the provider must meet all Department of Defense Supplier Performance Risk System standards. This requirement is managed under NAICS code 336413 for the Department of Defense via the DLA Aviation office in Philadelphia.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Aviation projects for the Department of Defense. The scope of work requires the execution of military-grade packaging and marking in strict accordance with MIL-STD-2073, MIL-STD-129, and MIL-STD-130. Specific technical requirements include the implementation of SUP PKG: Z, utilizing barrier bags and MIL-SPEC containers with a minimum of 1.5 inches of cushioning between the barrier bags and unit containers. The service provider is responsible for comprehensive marking, including PID and CLIN labeling, to ensure all units are fully prepared for FOB Destination shipment. This opportunity falls under NAICS code 488510 and is associated with the Pa DLA Aviation office in Philadelphia.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Supply of Electronic Switches (NSN 5895-01-728-8246)This subcontract involves the supply of five electronic switches for prime contractors working on DLA Aviation projects under the Department of Defense. The required components must match NSN 5895-01-728-8246 (Part Number 8532045-3) and adhere to Critical Application Item quality standards. Additionally, the provider must supply Material Safety Data Sheets in compliance with FED STD 313 and OSHA 29 CFR 1910.1200. To be eligible, the supplier must hold either ISO 9001 or SAE AS9100 certification. The opportunity was posted on October 8, 2026, with a response deadline of October 19, 2026. The project falls under NAICS code 335999 and is managed by the Pa DLA Aviation office in Philadelphia.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-STD-2073 Compliant Packaging and ShippingThis subcontract involves providing specialized packaging and packing services for servocylinders intended for prime contractors on DLA Aviation projects. The contractor is responsible for ensuring all units are packed according to MIL-STD-2073 using approved Packing Levels A and B containers, with all marking performed in accordance with MIL-STD-129. The scope of work includes applying PID and CLINs to labels to facilitate DLA destination transport and delivering fully packed and labeled shipping containers. This requirement is managed under the Department of Defense for the DLA Aviation office in Philadelphia, falling under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

IUID Marking and MIL-STD Labeling ServicesThis subcontract for IUID Marking and MIL-STD Labeling Services involves the permanent marking of servocylinders for prime contractors supporting DLA Aviation projects under the Department of Defense. The selected provider will be responsible for applying two-dimensional data matrix symbology in accordance with ISO/IEC 16022 and installing durable labels that meet MIL-PRF-61002 standards. To ensure non-duplicative registration within the DoD IUID Registry, the contractor must utilize laser marking or high-durability printing equipment. The project is categorized under NAICS code 339999 and is managed by the Pa DLA Aviation office in Philadelphia. Interested parties must submit their responses by the deadline of October 23, 2026. The final deliverables for this engagement include the delivery of all permanently marked hardware and the successful application of all required labels.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract for HazMat Identification and SDS Documentation supports prime contractors on DLA Aviation projects through the Department of Defense at the Philadelphia location. The primary scope of work involves utilizing chemical analysis tools to identify health or physical hazard chemicals used in coating and assembly processes. The selected provider must ensure all activities comply with FED STD 313 and OSHA 29 CFR 1910.1200 standards. Key deliverables for this engagement include the provision of comprehensive Material Safety Data Sheets and detailed HazMat identification reports.

Environmental Consulting Services

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Aviation projects through the Department of Defense. The scope of work involves providing specialized military-grade packaging, preservation, and marking for Torque Tube Assemblies to ensure they are fully prepared for shipment. All activities must adhere to strict regulatory standards, specifically utilizing MIL-STD-2073-1 for Packing Levels A and B, and MIL-STD-129 and ISO/IEC 16022 for IUID marking. The service provider is required to utilize MIL-SPEC shipping containers and specialized IUID marking equipment to meet agency requirements. This opportunity is categorized under NAICS code 488410 and is associated with the Pa DLA Aviation office in Philadelphia. Interested parties must note the response deadline of October 19, 2026.

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Torque Tube Assemblies (NSN 7RH 1680-01-353-8351 EL)This subcontract involves the manufacture and supply of finished Torque Tube Assemblies, specifically part number 123CS11939-507 (NSN 7RH 1680-01-353-8351 EL), for prime contractors supporting DLA Aviation projects. The scope of work requires the fabrication and assembly of these components as a Spare Buy, utilizing existing tooling to replicate parts in the absence of government drawings. Successful execution necessitates the use of precision machining and assembly equipment to meet strict technical specifications. The project is managed under the Department of Defense through the Pa DLA Aviation office in Philadelphia. Contractors must ensure full compliance with Buy American and Balance of Payments regulations, as well as DFARS cybersecurity standards. The procurement falls under NAICS code 336413, with a response deadline set for October 19, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS