Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing and Supply of Bipod Body Hinges

Open

Federal

Response Deadline11/23/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 118 Bipod Body Hinges, identified by NSN 1005014086678, for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier Operations. The contractor is responsible for fabricating the hinges according to specific technical drawings, applying a manganese coating, and ensuring all units adhere to the DLA Master List of Technical and Quality Requirements as well as QPL/QML standards. Packaging must be completed in accordance with MIL-STD-129 and Special Packaging Instruction AM12976902. The project is categorized under NAICS code 332710 and will be performed in Albany. To be eligible, the provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on November 11, 2026, with a response deadline of November 23, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

332710 - Machine Shops

Place of Performance

ALBANY, GA, 31704-1128, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-2527.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HINGE, BODY HEAD

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 11

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 12:00:00 PM ESTin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies Bipod Body Hinges (NSN 1005014086678) for prime contractors on DLA supply contracts. Fabricates hinges per technical drawings, applies manganese coating, and ensures compliance with DLA Master List of Technical and Quality Requirements and QPL/QML standards. Packages components per MIL-STD-129 and Special Packaging Instruction AM12976902. Requires CMMC Level 2 and ITAR/EAR compliance. Delivers 118 finished units.

Similar Contracts

Same NAICS industry code

Pivot Lever Manufacturing and Supply

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacturer of FAA-Certified Slip Joint NutsThis subcontract involves the manufacture of 69 FAA-certified slip joint nuts for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The selected manufacturer is responsible for fabricating NSN 4730017306787 to precise dimensions and tolerances using molding or precision machining. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710. Strict quality and compliance standards are required, including the implementation of ISO 9001:2015 quality systems and zero-based sampling according to QAP 13873. The contractor must ensure full DLA Directive C03 traceability and provide all necessary FAA certification paperwork upon delivery of the components.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Crank Handle SupplyThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture or sourcing of three finished crank handles for prime contractors. All deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements, with packaging and marking performed according to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. The contractor must maintain compliance with ITAR and EAR export controls and hold certification under the US/Canada Joint Certification Program. Performance will take place in JBPHH, with a response deadline set for November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Axial Fan Impeller Fabrication (Non-Additive)This subcontract involves the precision machining and fabrication of four axial fan impellers for prime contractors supporting DLA Distribution San Joaquin projects in Tracy, California. The work must be performed according to NSN 4140014254358 using CNC milling, turning, or casting and forging processes. It is explicitly stated that additive manufacturing is strictly prohibited for this requirement. The contractor is responsible for delivering four finished, packaged, and marked impellers in full compliance with DLA Master List RA001 and standards MIL-STD-2073-1E and MIL-STD-129. This project falls under NAICS code 332710 and is managed by the Department of Defense.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

Manufacturing and Supply of Resilient Weapon Mounts

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Manufacturing and Supply of Ring Spacers (NSN 001786598/5365)This subcontract involves the manufacture and supply of 81 ring spacers, identified by NSN 001786598/5365, for prime contractors supporting DLA supply contracts. The Department of Defense requires these components to be produced according to specific technical drawings and military standards, with a strict prohibition on the use of additive manufacturing processes. To ensure quality and safety, the manufacturer must perform rigorous inspections covering surface examination, fracture toughness, and tensile properties. The contractor is required to provide a Certificate of Quality Compliance that includes material traceability and a valid CAGE code. All completed spacers and the accompanying certification must be delivered to the DDSP New Cumberland Facility. This procurement is managed under NAICS code 332710 for the DLA Weapons Support ASC Supplier Oper AE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Supply of Tripod Mount Legs

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Supply of Hinge Pins (NSN 5315-01-098-2415)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Spacer Ring Manufacturing and SupplyThis subcontract involves the manufacture and supply of spacer rings for prime contractors supporting DLA Weapons Support hardware contracts. The selected provider will fabricate components according to NSN 5365-002914795 specifications, utilizing either precision machining or approved additive manufacturing processes. All deliverables must comply with the DLA Master List of Technical and Quality Requirements and RP001 packaging standards, with finished goods delivered FOB Origin. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the project falls under NAICS code 332710. Performance will take place in San Diego, California. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Aluminum Hose Elbow SupplyThis subcontract involves the fabrication and supply of 18 finished aluminum alloy hose elbows for prime contractors supporting government procurement projects under the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The technical requirements specify the use of 1.5 inch outer diameter tubing with a .065 inch wall thickness and a bend radius ranging from 3.5 to 5.50 inches, adhering to TDP Rev B Gen 2 and Basic Drawing NR 19207 12358969 Revision B. The project falls under NAICS code 332710 and is designated for performance in Texarkana, Texas. Interested parties must adhere to the timeline established by the posting date of November 11, 2026, with a response deadline set for November 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Plain Studs (NSN 5307003082655)This subcontract involves the supply of 88 plain studs, specifically Hamilton Sundstrand Corporation part number 27636-9, for prime contractors working on Defense Logistics Agency procurement projects. These components are designated as Critical Application Items and must be delivered with all required critical application documentation. The project is managed by the DLA Weapons Support ASC Supplier Order OEM Division under the Department of Defense, with the place of performance located at Tinker AFB. Compliance with strict technical standards is mandatory, including RP001 DLA Packaging Requirements and RQ017 Physical Identification and Bare Item Marking standards. The procurement falls under NAICS code 332710, and the response deadline for this requirement is November 19, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Brazing Solder Kits (NSN 3439-01-047-4141)This subcontract involves the supply of a complete brazing solder kit, specifically identified by NSN 3439-01-047-4141, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work requires the delivery of one kit, including solder and brazing alloy, to the destination inspection point at Edwards Air Force Base. The contractor must adhere to strict regulatory and safety standards, including hazardous materials labeling per 29 CFR 1910.1200 and shipping requirements according to MIL-STD-129. Additionally, compliance with DFARS 252.204-7012 is mandatory to ensure necessary cybersecurity protections are in place.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Gasket Supply (NSN 5330016879913)

All Other Miscellaneous Manufacturing

POSTED

about 10 hours ago

DEADLINE

Specialized Component Transport and LogisticsThe Specialized Component Transport and Logistics subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, involves the transportation and delivery of automotive components for prime contractors. The selected provider is responsible for managing shipment and storage marking in accordance with MIL-STD-129 and coordinating ocean freight specifically using U.S.-flag vessels. Key operational requirements include strict compliance with MARAD and DoD ocean transportation regulations, as well as the delivery of all necessary hardware and shipping documentation. The contractor must provide rated on board vessel operating carrier's ocean bills of lading to both the Contracting Officer and MARAD. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 483111.

Deep Sea Freight Transportation

POSTED

about 10 hours ago

DEADLINE

Driving Axle Differential ProductionThis subcontract involves the manufacture and supply of driving axle differentials for prime contractors supporting Department of Defense DLA supply contracts. The scope of work includes fabricating units to strict technical requirements, utilizing precision machining equipment, and ensuring all materials meet government specifications. Quality assurance is maintained through First Article Testing and sampling protocols in accordance with MIL-STD-1916 or ASQ H1331, while shipment marking must comply with MIL-STD-129. The production will be performed in New Cumberland, Pennsylvania, with the final differential units delivered FOB Destination Other. This effort falls under NAICS code 333318 and is managed by the DLA Weapons Support Land Supplier Operations Vehicle Support agency.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

Gasket Supply (NSN 5330-00-0721981)This subcontract involves the manufacture or procurement of two gaskets meeting NSN 5330-00-0721981 specifications for prime contractors working on Defense Logistics Agency projects. A critical requirement is that all supplied gaskets must be asbestos-free in accordance with FED-STD-313. The contractor is responsible for strict adherence to military standards, including identification marking per MIL-STD-130N and packaging and palletization following MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA Packaging Requirements. This project falls under NAICS code 339991 and is managed by the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized packaging and marking for prime contractors supporting DLA Weapons Support projects. The scope of work requires the packaging of critical gun parts in accordance with ASTM D3951 and shipment marking per MIL-STD-129. Additionally, the contractor must apply Hazard Warning Labels as mandated by 29 CFR 1910.1200 and ensure full compliance with RP001. The project entails the delivery of 24 packaged and marked units to DLA Distribution DDSP in New Cumberland. This effort falls under NAICS code 561910 and is managed through the Department of Defense for the DLA Weapons Support Land Supplier Opns Vehicle Spt agency.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Specialized Testing and Quality Validation for Sniper Data BoardsThis subcontract involves providing specialized testing and quality validation for Sniper Data Boards to support DLA Weapons Support Land Supplier Operations. The scope of work requires the performance of First Article Testing on five units and Product Verification Testing in accordance with Procurement Note E05. The contractor must ensure strict compliance with RQ001 quality requirements and coordinate directly with the DCMA QAR for necessary origin inspections. The primary deliverables for this engagement include comprehensive FAT and PVT test reports along with the delivery of certified compliant units. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 541380. Interested parties must respond by November 23, 2026, to support these Department of Defense requirements.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

Sniper Data Board Fabrication and AssemblyThis subcontract involves the manufacture and assembly of 24 Sniper Data Boards, identified by NSN 1005016815906, for prime contractors supporting DLA Weapons Support projects. The scope of work includes the fabrication of critical gun parts in accordance with TDP Rev B Gen 2 and reference QPL-3150-34, ensuring all production adheres to SAE AS9003 quality standards. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Due to the nature of the hardware, the contractor must maintain active DDTC registration and full ITAR compliance. Performance of the contract will take place in New Cumberland, Pennsylvania.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 10 hours ago

DEADLINE

Nonmetallic Special Shaped Section Seal SupplyThis subcontract involves the supply of nonmetallic special shaped section seals for prime contractors supporting DLA Weapons Support projects. The selected provider is responsible for manufacturing or sourcing Seal Master Corp P/N G-13 in accordance with NSN 5330014453547 specifications. All materials must feature identification marking per MIL-STD-130N and be packaged according to DFARS 252.223-7001 standards. The contract requires the provider to maintain CMMC Level 2 and C3PAO certifications. Completed seals are to be delivered via Direct Vendor Delivery, FMS, or Stock Shipment to the place of performance in Portsmouth. This opportunity is managed by the Department of Defense under NAICS code 331491, with a response deadline of November 23, 2026.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 10 hours ago

DEADLINE

Critical Application Gasket SupplyThis subcontract involves the manufacture and supply of 4,000 critical application gaskets, identified by NSN 5330013606114, for prime contractors supporting government procurement projects. The work is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. All items must be produced in strict accordance with specific technical drawings and specifications to ensure operational integrity. The supplier is required to provide a Certificate of Conformance for the materials and must adhere to MIL-STD-129 standards for all shipment marking. Performance for this contract is centered in New Cumberland, Pennsylvania. The solicitation was posted on November 11, 2026, with a response deadline set for November 23, 2026, under NAICS code 332612.

Spring (Light Gauge) Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Shoulderered Shafts (NSN 3040-00-200-1392)

Machine Tool Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Non-Rotating Shaft Eye Bracket

Commercial and Service Industry Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

U.S.-Flag Ocean Transportation Services

Deep Sea Freight Transportation

POSTED

about 10 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Shim Supply and Delivery

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Precision Machining of Valve Body Housings

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Supply of Seal Inserters

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Close Tolerance Screw Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacturing of Rigid Connecting Links (NSN 5340-01-722-1449)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Manufacturing of Packing Retainer (NSN 5330-01-219-6003)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

Machine Thread Bushing Fabrication

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Tube Elbow Fabrication and Supply

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Precision Bending and Fabrication of Metallic Tubes

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Retaining Ring Manufacturing and Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Retaining Rings (NSN 5325-01-0754957)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Door Fitting Supply (NSN 1560-00-486491-3)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS