Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing and Supply of Cap, Wormwheel Housing

Open

Federal

Response Deadline11/13/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacturing and supply of four wormwheel housing cap units for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the caps according to Alfa Laval Inc part number 99138428 and NSN 1420011481858 technical specifications using precision machining equipment. To ensure operational readiness, the contractor must perform quality assurance testing to verify compatibility with the wormwheel assembly. The project requires the contractor to maintain ISO 9001:2015 certification and provide a CMMC Level 2 self-assessment. Performance of the contract will take place in San Diego, California. Interested parties must respond by November 13, 2026, under NAICS code 332710.

General Info

Manufacture four wormwheel housing caps for DoD in San Diego by November 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332710 - Machine Shops

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-8721.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CAP, WORMWHEEL HOUSI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 AM PSTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies Cap, Wormwheel Housing for prime contractors delivering DLA supply contracts. Fabricates housing caps to Alfa Laval Inc part number 99138428 and NSN 1420011481858 technical specifications using precision machining equipment. Performs quality assurance testing for wormwheel assembly compatibility. Requires ISO 9001:2015 certification and CMMC Level 2 self-assessment. Delivers four finished housing cap units.

Similar Contracts

Same NAICS industry code

Fabrication of Rigid Connecting Links (Aluminum Alloy)This subcontract involves the precision machining of 10 aluminum alloy rigid connecting links for the DLA Weapons Support Land Supply Chain. The contractor is required to manufacture components according to NSN 3040-00-011-682 specifications using CNC equipment and calibrated measuring and test equipment. Performance will take place in San Diego, California, under NAICS code 332710. Strict adherence to quality standards RA001, RQ001, and RQ002 is mandatory. Additionally, the provider must maintain JCP certification and ensure full compliance with ITAR and EAR regulations to handle the necessary technical data. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Precision Shaft Manufacturing (NSN 3040011216084)

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

Precision Fabrication of Seal 'T' Rods (NSN 5330-01-204-5577)This subcontract involves the precision fabrication of 54 Seal T Rods under NSN 5330-01-204-5577 for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for manufacturing these units in strict accordance with the technical data package outlined in the DLA Master List RA001. Performance will take place in Tracy, California, under NAICS code 332710. The agreement mandates strict adherence to safety and regulatory standards, specifically prohibiting the use of asbestos or the intentional addition of mercury. Compliance with the Buy American Act per DFARS 252.225-7001 and cybersecurity requirements under DFARS 252.204-7012 is required. The final deliverable consists of 54 completed rods that meet all specified technical requirements.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Manufacturer of Steel Tube Caps (NSN 4730013592430)This subcontract involves the manufacture and delivery of 1,863 steel tube caps for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the components using precision machining or forming equipment to ensure full compliance with technical standards SAE J1453-3 and SAE J1453-1-2012. The agreement mandates strict adherence to the Buy American Act and prohibits the use of Class I ozone depleting chemicals during production. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Precision Machining of Actuator HousingsThis subcontract involves the precision machining of two Actuator Housings, identified by NSN 1680008025650, for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed using CNC machining centers in accordance with specific technical drawings and the DLA Master List of Technical and Quality Requirements for Critical Application Items, with a strict prohibition on the use of additive manufacturing. Eligible providers must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 332710 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Precision Machining and Fabrication of Vehicular BracketsThis subcontract, titled Precision Machining and Fabrication of Vehicular Brackets, involves the final machining, forming, and finishing of vehicular component brackets for prime contractors supporting DLA Weapons Support Land Supplier Operations. The work requires the use of CNC machining centers or precision stamping presses to ensure all components meet the technical requirements of NSN 2590-01-558-4873 and the DLA Master List RA001. All deliverables must strictly comply with the Buy American Act. The project is managed under the Department of Defense for the DLA Weapons Support Land Supplier Opns Engines agency, with performance taking place in Tracy, California. Interested parties should note the response deadline of November 16, 2026, and the classification of the work under NAICS code 332710.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 4 hours ago

DEADLINE

Handset Holder Box and Hanger Final AssemblyThis subcontract for the Handset Holder Box and Hanger Final Assembly involves performing final machining and assembly for prime contractors supporting the DLA Weapons Support Active Devices Division. The scope of work requires machining cast or forged parts to precise tolerances and assembling the Box and Hanger Assembly according to NSN 5965-00-981-6509. All work must be executed using CNC machining centers and precision measurement tools in strict compliance with the DLA Master List of Technical and Quality Requirements to deliver five completed assemblies. The project is categorized under NAICS code 332710 and is managed by the Department of Defense. Performance of the contract will take place at Hill AFB, zip code 84056-5734. The solicitation was posted on November 5, 2026, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 4 hours ago

DEADLINE

Precision Machining and Fabrication of Valve SeatsThis subcontract involves the precision machining and fabrication of 17 critical application valve seats for prime contractors supporting DLA Distribution San Joaquin. The work must be performed in accordance with basic drawing 80064 1385637, revision P, utilizing CNC machining or precision grinding equipment. Strict adherence to zero-nonconformance sampling and Berry Amendment material sourcing requirements is mandatory for all deliverables. The performing entity must hold SAE AS9003 or ISO 9001 certification and maintain approval under the US/Canada Joint Certification Program. The project is categorized under NAICS code 332710 and will be executed in Tracy, California. Responses for this requirement are due by November 16, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

Precision Fabrication of Corrosion-Resisting Steel Tube Assemblies

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Precision Machining of Valve DisksThis subcontract, issued by the Department of Defense DDSP New Cumberland Facility, requires the precision machining, turning, and milling of ten finished nickel alloy valve disks. The contractor must machine raw nickel alloy to the specific dimensions outlined in Basic Drawing NR 53711 6397408 Revision C utilizing CNC lathes and precision milling machines. To ensure quality and compliance, the contractor must utilize inspection systems that meet SAE AS9003 or ISO 9001 standards, with sampling conducted according to MIL-STD-1916 or ASQ H1331. The project falls under NAICS code 332710 and is performed in New Cumberland, Pennsylvania, with a response deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Supply of Machine Keys (NSN 5315-00-843-8587)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Precision Machining of Bronze/Nickel Copper Valve SeatsThis subcontract involves the precision machining of 28 bronze stop check valve seats with union ends for DLA Weapons Support Maritime Hardware projects. The selected contractor will perform CNC turning and milling on forged nickel copper blanks, utilizing CMM and other precision measuring instruments to ensure strict dimensional inspection and quality control. The project is managed by the Department of Defense through the DDSP New Cumberland Facility. To be eligible, contractors must hold several critical certifications, including SAE AS9003 or ISO 9001, CMMC Level 2, DFARS 252.204-7012, and JCP certification. All work is to be performed in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supplier of Blind Rivets (NSN 5320-00-718-0835)

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The scope of work requires the contractor to perform bare item markings according to RQ017, execute packaging and preservation in compliance with MIL-STD-2073-1E Method 33, and apply shipping labels per MIL-STD-129. These rigorous standards are necessary to ensure a 36-month shelf life for the materials. The specific deliverable consists of 21 individually marked and packaged grommets to be shipped to DLA Distribution Cherry Point. The project falls under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Nonmetallic Grommet Manufacturer (Fuel Vent Line)This subcontract involves the manufacture of 21 nonmetallic grommets for fuel vent lines to support prime contractors on DLA Weapons Support ASC projects. The components must be fabricated according to basic drawing 78286 65307-03016 and NSN 5325-00-060-5294 using either precision molding or machining processes. Performance will take place in Cherry Point, and the final delivery must consist of 21 finished and inspected units. To qualify, the manufacturer must maintain a quality management system that complies with SAE AS9003 or ISO 9001 standards and strictly adhere to the Buy American program. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solid Rivet Supplier (NSN 5320-00-584-9078)This subcontract involves the manufacture and supply of 203 lbs of precision solid rivets for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The rivets must be produced according to NSN 5320-00-584-9078 specifications, with strict adherence to MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Final delivery is required at the DLA Distribution DDSP facility in New Cumberland, Pennsylvania. To be eligible, the supplier must maintain either SAE AS9003 or ISO 9001 quality certification and demonstrate cybersecurity compliance with NIST SP 800-171. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Thrust Washer Bearings (NSN 3120014840849)

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC aviation projects. The scope of work involves performing military packaging and marking of components in strict accordance with MIL-STD-2073-1E and MIL-STD-129. To protect sensitive electronics, the provider must utilize approved MIL-SPEC cushioning and dunnage materials while ensuring all hazardous materials comply with DFARS 252.223-7001 regulations. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. All completed, shipping-ready units are to be delivered to DLA Distribution San Diego. The contract falls under NAICS code 488410, with a response deadline set for November 13, 2026.

Motor Vehicle Towing

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Dimming Type Indicator Light Assembly (NSN 6220-01-423-1476)This subcontract involves the manufacturing of two Dimming Type Indicator Light Assemblies (NSN 6220-01-423-1476) for the DLA Weapons Support ASC Commodities Division. The project requires precision electronics assembly based on technical drawings and Limited Rights Data. All deliverables must be fully tested, marked, and inspected to ensure compliance with strict quality standards. The contractor must maintain JCP certification and hold ITAR/EAR authorization to perform the work. Adherence to ISO 9001:2015 and NAVAIR ALRE traceability is mandatory. Performance will take place in San Diego, with a response deadline set for November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of PIN-RIVET (BACB30MC6-11)This subcontract involves the supply of 231 certified PIN-RIVET units, specifically part number BACB30MC6-11, for the Defense Logistics Agency Weapons Support ASC Commodities Division. The items must be manufactured or sourced according to Basic Drawing NR 81205 BACB30MC Revision AK and meet the strict tolerances associated with NSN 5320001213013, necessitating the use of precision manufacturing equipment. The contract requires that all items be packaged in accordance with ASTM D3951 standards. Performance for this requirement is centered at Hill AFB, and the procurement falls under NAICS code 332510. Interested parties must have responded by the deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Sleeve Bushing Supply (NSN 3120-01-089-0691)This subcontract involves the supply of sleeve bushings for prime contractors under the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing hardware that meets the specific technical requirements for NSN 3120-01-089-0691 using precision machining equipment. The final delivery consists of two physical sleeve bushings that must adhere to RP001 packaging standards. Compliance requirements include providing necessary documentation for the Source Approval Request per RC001. The contract falls under NAICS code 332721 and was posted on November 5, 2026, with a response deadline of November 13, 2026.

Precision Turned Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly Supplier

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

Precision Manufacturer - Flat Washers (NSN 5310-01-592-9749)This subcontract involves the manufacture and supply of 12 high-precision flat washers for the DLA Weapons Support ASC Commodities Division. The items must be produced according to Basic Drawing NR 43689 709-5486674 Revision M, with strict prohibitions against the use of mercury or additive manufacturing. All materials and processes must comply with the Buy American Act and the Berry Amendment, and the final products must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. Qualified providers must possess precision machining equipment and hold JCP certification along with either SAE AS9003 or ISO 9001 certification. The performance location for this contract is Tracy, California. Interested parties must submit their responses by November 13, 2026, for this Department of Defense requirement under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacture of Vehicular Component Brackets (P/N 4341797)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 4 hours ago

DEADLINE

Monel Hose-to-Boss Adapter Manufacturing

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Supply of Machine Bolts (NSN 5306000873762)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Precision Machining and Finishing of Hub Body

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Manufacture and Supply of De-Icing Brackets

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Precision Metal Tube Assembly Fabrication

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Precision Machined Linear Actuating Piston Supplier

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Manufacture and Supply of Valve Inserts (NSN 2910001064779)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Precision Machining/Manufacturing of NAS77 Sleeve Bushings

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Angle Bracket Fabrication (NSN 5340-01-684-8157)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Source-Controlled Component Supply

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

Push-Pull Control Assembly Manufacturing

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS