Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacturing and Supply of Electronic Control Panel (NSN: 1680-01-681-9448)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the manufacture, quality assurance, and delivery of four electronic control panels with part number 21E0955-3, each required to fully comply with military specifications. Full traceability of materials, components, and manufacturing processes is mandated alongside comprehensive documentation and inspection protocols to ensure adherence to regulatory and performance standards. The units are identified by the National Stock Number 1680-01-681-9448 and are being procured under a subcontract arrangement managed by the Defense Logistics Agency on behalf of the Department of Defense. Production must meet rigorous defense-grade requirements, including documented testing, certification, and records retention to support accountability throughout the supply chain. The contract was posted on July 16, 2026, and is classified under NAICS code 334418, indicating it pertains to the manufacturing of other electronic components. While the specific place of performance and point of contact are not specified, the work is intended to fulfill a critical defense systems requirement, with all deliverables subject to acceptance by government authorities.

General Info

Manufacture and delivery of four MIL-SPEC electronic control panels under DLA subcontract with full traceability and documentation.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-T-384H.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PANEL, CONTROL, ELECT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, quality assurance, and delivery of 4 units of electronic control panel (P/N: 21E0955-3) compliant with military specifications, including full traceability, documentation, and inspection requirements.

Similar Contracts

Same NAICS industry code

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M0-26-T-071N

This contract, identified as SPE7M0-26-T-071N, is for the procurement of one circuit card assembly, specifically a programmable controller with 20 inputs and 12 outputs. The item is identified by NSN 5998016160938 and is associated with Rockwell Automation part number 1761-L32-AWA and ITW Food Equipment Group part number 94-5899-B. This is designated as a critical application item with a required delivery date of September 3, 2026, and a delivery timeframe of five days after the order. The shipment is destined for the USS San Antonio LPD 17 via vessel shipment, with inspection and acceptance occurring at the destination. Compliance is required for DLA packaging requirements, including ASTM D3951 and MIL-STD-129, as well as CMMC Level 2 self-assessment and covered defense information protocols. The contract adheres to the DLA Master List of Technical and Quality Requirements and specifies a zero percent quantity variance.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

HARDWARE KIT, ELECTRONI

Solicitation # SPE7L1-26-Q-1590

This contract is a firm fixed price solicitation for the procurement of 171 electronic hardware kits under part number 5340-01-105-5383. The items must be manufactured in accordance with specific technical drawings and TDP Rev A Gen 2 standards. Delivery is required within 54 days after order, with the destination and acceptance point set at the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-2073-1 for kit preservation. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires compliance with covered defense information and configuration change management protocols.

LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

MANNCORP Purchase

Solicitation # 80NSSC26943483Q

The NASA Shared Services Center intends to award a sole source contract to MANNCORP INC for the MANNCORP Purchase under the authority of FAR 12.102(a). This procurement, identified by solicitation number 80NSSC26943483Q, is categorized under NAICS code 334418 and is designated as an 8(a) sole source set-aside. While the NASA Shared Services Center is the procuring entity, the actual performance of the contract will take place at the NASA Goddard Space Flight Center. Interested organizations must submit their capabilities and qualifications in writing to Procurement Specialist McKenzie Hanson by 3:00 p.m. CST on September 7, 2026. These submissions will be used to determine if the procurement will remain sole source or be shifted to a competitive basis. All responses must be written, as oral communications are not permitted, and the acquisition is subject to the NASA FAR Supplement Clause regarding the Center Ombudsman.

NASA Shared Services Center

POSTED

about 13 hours ago

DEADLINE

59--CABLE ASSEMBLY,SPEC

Solicitation # N0038326QSB42

This presolicitation issued by the Department of Defense Navsup Weapon Systems Support is for the procurement of six cable assemblies under NSN 1R-5995-016913821-BL and reference number 4222AS0169-01. The requirement is designated as a sole source acquisition because the government lacks the necessary data to contract with alternative sources. Delivery is specified as FOB Origin, and the acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Prospective bidders must obtain Government Source Approval prior to the award. Those who are not already approved sources must submit all required documentation as detailed in the NAVSUP WSS Source Approval Brochure along with their proposals to be considered. The solicitation, identified as N0038326QSB42, was posted on September 2, 2026, with a response deadline of October 13, 2026. Inquiries regarding this notice should be directed to Cody P. Cameron.

Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 1 month

CIRCUIT CARD ASSEMB

Solicitation # SPE7M1-26-T-323E

This contract is for the procurement of one circuit card assembly, part number 183 105 or TM-356B, manufactured by Miller Electric Mfg. LLC. The item is identified by NSN 5998014972691 and must be delivered within 20 days. The shipment is destined for the USS Kearsarge LHD 3 via the fastest traceable means, with inspection and acceptance occurring at the destination. Strict environmental regulations prohibit the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional mercury in batteries, sensors, or weapon systems as specified by NAVSEA. The supplier must adhere to DLA packaging requirements, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and any government identification must be removed from non-accepted supplies.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPE7M1-26-T-279H

This contract is for the procurement of two circuit card assemblies, identified by NSN 5998015429265 and Testek LLC part number 320191-P5. The order is managed by the Department of Defense Maritime Supply Chain under solicitation SPE7M1-26-T-279H, with a required delivery date of June 6, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Diego. The agreement mandates strict adherence to technical and quality requirements, including DLA packaging standards and CMMC Level 2 self-assessment for cybersecurity. Because the items are electrostatic discharge and electromagnetic interference sensitive, the supplier must use DOD qualified protective packaging materials in accordance with MIL-PRF-81705 and MIL-STD-129. All components must be handled at approved protective workstations to prevent damage to leads and terminals, and the supplier is responsible for verifying that all barrier materials come from qualified manufacturers on the QPL-81705 list.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

in about 16 hours

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M2-26-T-6627

This contract is for the procurement of one circuit card assembly under solicitation number SPE7M2-26-T-6627 for the Department of Defense Nuclear Reactor Program. The item must adhere to specific DLA packaging and quality requirements, including strict prohibitions against the use of class I ozone depleting chemicals and the intentional addition of mercury, except where functionally required and specified by NAVSEA. The material must meet NAVAIR aircraft launch and recovery equipment traceability standards and be marked with the contract number, NAWC CAGE, and part number as per technical drawings. The item is designated as a restricted source item requiring engineering source approval from the government design control activity. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, restricting the disclosure of information to unauthorized foreign persons and requiring contractors to have approved JCP certification and completed specific DLA training. Delivery is required within 298 days after receipt of the order, with performance located in San Diego, California.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPE7M1-26-T-322V

This contract is for the procurement of two circuit card assemblies, identified by NSN 5998-01-497-2689 and manufactured by Miller Electric Mfg. LLC. The items are to be delivered to the USS Kearsarge LHD 3 via the fastest traceable means, with a delivery timeframe of 20 days. The agreement specifies a strict prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional uses such as batteries or sensors as defined by NAVSEA. The contract adheres to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. It incorporates technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies. Inspection and acceptance will take place at the destination, and the shipment is designated as a vessel shipment under the Maritime Supply Chain agency of the Department of Defense.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-26-T-324D

This contract is for the procurement of three circuit card assemblies, identified by NSN 5998-01-356-6566 and part number 102967-001. The order is issued under solicitation SPE7M1-26-T-324D with a required delivery date of September 4, 2026, and a delivery timeline of 20 days after receipt of order. Shipping is FOB Origin, with the final destination being the Parts-Attach General Depot in Tainan City, Taiwan. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. Technical compliance requires the use of MIL-PRF-31032 for printed circuit boards and ensures laminate materials meet quality standards equivalent to the cancelled MIL-S-13949. Additionally, the contractor must comply with Covered Defense Information regulations and provide a CMMC Level 2 self-assessment for cybersecurity maturity.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M126T325B

The Department of Defense, through DLA Land and Maritime, is seeking quotes for the procurement of four circuit card assemblies under solicitation number SPE7M126T325B. The required items are identified by NSN 5998015258702, with the approved source listed as 32770 508-00576-00. Delivery is to be made to DLA Distribution within 436 days after the order is received. This is a combined solicitation under NAICS code 334418, and all responsible sources are invited to submit electronic quotes. The deadline for responses is September 14, 2026. No hard copies of the solicitation or associated technical drawings and specifications are available, and all submissions must be handled electronically via the provided procurement channels.

DLA Land And Maritime

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M126T324Z

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of four Circuit Card Assemblies under NSN 5998015247943. This request for quotation, identified as solicitation SPE7M126T324Z, specifies a delivery requirement to DLA Distribution San Joaquin within 283 days after the order is placed. Approved sources for this item include 23905 2010A3500-1 and 23905 PL9904A6000-1 item number 33. All interested and responsible sources must submit their quotes electronically by the deadline of September 14, 2026. The procurement falls under NAICS code 334418 and is managed by an office located in Columbus, Ohio. No hard copies of the solicitation, specifications, plans, or drawings are available, and all inquiries should be directed to the buyer via the DIBBS portal.

DLA Land And Maritime

POSTED

DEADLINE

49--CABLE ASSEMBLY,INTE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RAA96

This presolicitation notice from Navsup Weapon Systems Support concerns the procurement of 63 units of an integrated cable assembly under NSN 7R-4920-015016740-QF, with delivery terms set as FOB Origin. Due to the specialized engineering skills, unique design capabilities, and proprietary technical data required to maintain part quality, the government intends to solicit and negotiate with a single source under FAR 6.302-1. Any alternate source wishing to compete must undergo a qualification process approved by the design control activity and the cognizant government engineering activity. Interested parties may submit proposals, quotations, or capability statements within 45 days of the notice, though the government retains sole discretion on whether to conduct a competitive procurement. Technical specifications and standards are available through the DODSSP or ASSIST-Online, although specific patterns and drawings are not stocked there. The government has determined that FAR Part 12 for commercial items does not apply, but interested parties have 15 days to notify the contracting officer if a commercial item can satisfy the requirement.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 2 months

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE, PNEUMATIC TIRE

Solicitation # SPE7L7-26-T-5080

This contract is for the procurement of four pneumatic tire valves, identified by NSN 2640008572891 and part numbers VS-740-1-GOVT or 717-7. The valves must be size TR-717-02, feature an off-center position, and utilize a screw-in tube application method. A critical environmental requirement prohibits the use of Class I ozone depleting chemicals in the delivered items. The order is issued by the Defense Logistics Agency with a delivery requirement of 20 days after order. Shipping is FOB Origin and destined for the Parts-Attach General Depot in Tainan City, Taiwan. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, as well as DLA packaging requirements for procurement.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

DUCT ADAPTER KIT, AIR C

Solicitation # SPE8E8-26-T-5476

This contract, identified as SPE8E8-26-T-5476, is issued by the Defense Logistics Agency for the procurement of seven air conditioner duct adapter kits. The items are identified by NSN 4130-01-565-5614 and part number 5-199-00-000-024 from Fluid Handling LLC. Delivery is required within 167 days, with a required delivery date of February 10, 2027, and a need ship date of March 1, 2027. The shipment is to be delivered FOB Origin to DLA Distribution Norfolk, Virginia. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a prohibition on the intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional components as defined by NAVSEA. Inspection and acceptance will take place at the destination. The contract also incorporates technical and quality requirements from the DLA Master List and notes that covered defense information potentially applies.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5085

This contract is a solicitation by the Defense Logistics Agency for the procurement of one power supply unit, identified by NSN 6130-01-687-9026 and part number 1600902-1 from Thales Defense & Security Inc. The delivery is required within 20 days after the order, with a final required delivery date of August 25, 2026. The item is to be delivered FOB Origin to the 0325 CS BN CO A Maintenance facility at Schofield Barracks, Hawaii. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE8E4-26-Q-0397

This contract is for the procurement of 30 feet of structural steel angle measuring 4 by 4 inches with a thickness of 0.312 inches. The material must be supplied in whole foot lengths between 30 and 40 feet and must adhere to MIL-S-22698 and ABS Rule Part 2, including the AB identification marking. A critical requirement is that all material must have an ABS Surveyor's endorsement on the certificates to be accepted. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for the award. Comprehensive documentation is required, including a Certificate of Quality Compliance and specific continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. Packaging and marking must comply with MIL-STD-129 and ASTM A700, with delivery expected within 30 days after the order.

Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE3SE-26-Q-0457

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE3SE-26-Q-0457 for the procurement of two units of a non-NSN item identified by part number 7310GM5022323. This federal requirement is tracked under purchase request 7018102192. The solicitation was posted on September 2, 2026, with a response deadline set for September 10, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5088

This contract is for the procurement of five wet charged lead acid storage batteries, specifically East Penn Manufacturing Co. part number 24M-5, under NSN 6140-01-457-2450. The items are classified as DOT Class Corrosive and must be shipped as batteries wet filled with acid. They carry a non-extendable shelf life of six months and must be delivered FOB destination within ten days. The supplier must comply with strict safety and quality standards, including the submission of Safety Data Sheets and hazardous communication labels per Federal Standard 313-E and OSHA requirements. Packaging must adhere to MIL-STD-2073-1E, MIL-STD-129, and UN requirements using 4G fiberboard boxes. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5089

This contract, identified as SPE7L7-26-T-5089, is a solicitation by the Defense Logistics Agency for the procurement of battery covers under NSN 6160014747458. The agreement consists of three separate line items, each for a quantity of one unit, with delivery required within five days. Shipments are destined for various locations, including Fort Riley, Kansas, Grand Prairie, Texas, and Parkersburg, West Virginia. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Terms specify FOB Origin with inspection and acceptance occurring at the destination, and a zero percent quantity variance is permitted.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-5083

This contract is for the procurement of two power supply units, part number FH-64-A from Teledyne FLIR Defense, LLC, under solicitation number SPE7L7-26-T-5083. The items are identified by NSN 6130-01-619-5734 and are to be delivered FOB Origin to Fort Stewart, Georgia, within 20 days. The required delivery date is set for August 25, 2026. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied. Additionally, the contractor must comply with CMMC Level 2 self-assessment standards and other technical requirements listed in the DLA Master List.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

VALVE, FLOW CONTROL

Solicitation # SPE7MC-26-T-247V

This contract is for the procurement of one flow control valve, identified by NSN 4820-99-840-6192, for the Defense Logistics Agency. The item is designated as a critical application item and must be delivered FOB destination to the USS Michael Monsoor DDG 1001 within 20 days. The required delivery date is set for August 14, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. There are explicit prohibitions against the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. All shipments must be sent via the fastest traceable means, and parcel post is prohibited.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5087

This contract is a solicitation from the Defense Logistics Agency for the procurement of two lead acid AGM storage batteries, specifically part number GPL-4DA from Concorde Battery Corporation. The items are identified by NSN 6140-01-596-7978 and are subject to a non-extendable shelf life of 18 months. Delivery is required within five days after receipt of order, with the destination being the U.S. Naval Air Facility Atsugi in Japan. The agreement mandates strict adherence to several military standards, including MIL-STD-129R and MIL-STD-130N for marking and identification, and MIL-STD-2073-1E for packaging. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331. Additionally, the contract specifies that mercury must not be intentionally added to the hardware, except for functional use within the batteries, and requires the provision of MSDS/PSDS documentation per FED-STD-313.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

CUTTER BIT, TOOL HOLDER

Solicitation # SPE8E5-26-T-4250

This contract is for the procurement of five cutter bit tool holders under solicitation SPE8E5-26-T-4250 for the Defense Logistics Agency. The items must adhere to specific technical dimensions, featuring a square cross section of 9/16 inch and an overall length of 4 inches with ground sides. The procurement follows federal commercial item standards and requires compliance with the DLA Master List of Technical and Quality Requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Delivery is required within 20 days, with shipping designated as FOB Origin and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA requirement RP001. The items are to be shipped via traceable means to the USALRCTR at Fort McCoy, Wisconsin.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-5091

This contract is for the procurement of two wet-charged lead acid storage batteries, identified by NSN 6140014572420 and East Penn Manufacturing part number 1131PMF. The items are classified as hazardous materials, specifically corrosive Class 8, UN ID UN2794, and require strict adherence to Federal Standard 313-E for Safety Data Sheets and OSHA Hazard Communication Standard labeling. The batteries have a non-extendable shelf life of six months and must be delivered FOB destination to Camp Arifjan, Kuwait, within 10 days of order. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a requirement for zero non-conformances in sample lots. Packaging must comply with MIL-STD-2073-1E and UN requirements using 4G fiberboard boxes, while marking must follow MIL-STD-129. Additionally, the contract prohibits the intentional addition of mercury except where functionally required, and requires the removal of government identification from any non-accepted supplies.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE