Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing and Supply of Lighting Fixture (NSN 6210-01-459-6609)

Active

Federal

Response Deadline10/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 23 lighting fixtures, specifically NSN 6210-01-459-6609 (GE P/N L340), for prime contractors supporting the DLA Weapons Support ASC Commodities Division. Production must adhere to limited rights technical data and specified drawings, with quality assurance managed through sampling plans per MIL-STD-1916 or ASQ H1331. All completed units must be packed and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor is required to maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Performance for this contract will take place in Bremerton, Washington. Interested parties must note the response deadline of October 29, 2026, for this Department of Defense requirement under NAICS code 335132.

General Info

Manufacture 23 lighting fixtures for DLA in Bremerton, WA by October 29, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

335132 - Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

Place of Performance

BREMERTON, WA, 98314-6001, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-5790.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FIXTURE, LIGHTING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineOct 29

Submission deadline

Response Deadline

10/29/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies lighting fixtures for prime contractors delivering DLA supply contracts. Produces 23 units of NSN 6210-01-459-6609 (GE P/N L340) per limited rights technical data and cited drawings. Implements sampling plans per MIL-STD-1916 or ASQ H1331. Requires CMMC Level 2 certification and ITAR/EAR compliance. Delivers completed fixtures packed per MIL-STD-2073-1E and marked per MIL-STD-129.

Similar Contracts

Same NAICS industry code

3 Section Traffic Signal Heads with LED Lamps

Solicitation # 601310000103563

The Texas Department of Transportation is soliciting bids under solicitation number 601310000103563 to establish a contract for 3 Section Traffic Signal Heads with LED Lamps for the Fort Worth District. The required goods must be high-quality, commercially available retrofit replacements that fit existing housings without special tools and include gaskets for proper fitting. All units must be permanently marked with the manufacturer's name, serial number, and date of manufacture, and must feature an Intertek ETL Verified label or equivalent NRTL status certification. Compliance with ITE standards for LED vehicle arrow and circular signal supplements is required, with the latest Department specifications taking precedence in case of conflict. Responses are due by November 17, 2026, at 3:00 p.m. Central Time and must be submitted via the designated procurement website. A complete submission requires a signed Execution of Response, a Preferences Schedule, and a Bid Table with proposed unit prices. Award will be based on best value, with purchase price and adherence to specifications as the primary considerations. To be eligible, respondents must pass a documentation review and maintain a vendor performance rating of A, B, or C in the CPA Vendor Performance Tracking System. The contract mandates that all goods be shipped FOB Destination, with the vendor bearing all freight costs and risk of loss until delivery. TxDOT reserves the right to inspect goods at any time, including at the vendor's place of business, and may perform random sample testing within 30 days of delivery. Additionally, vendors must comply with various state and federal requirements, including Buy America certifications, child support obligation disclosures, and non-discrimination authorities. Invoices must be submitted electronically to the TxDOT Procurement Division for payment.

Texas Department of Transportation

POSTED

about 24 hours ago

DEADLINE

Aviation-Grade Wire and Connector SupplyThis subcontract involves the procurement and delivery of aviation-grade wire and connectors to support prime contractors for the Department of Defense, specifically under the DLA Weapons Support Aviation Supply Chain. The scope of work focuses on sourcing and delivering MIL-SPEC connectors, shielding, and conductor wire necessary for NSN 6150-01-685-9704, with all raw materials delivered directly to the fabricator. Strict compliance is required with the Buy American Act and the Berry Amendment, and the provider must supply Certificates of Conformance for all materials. The project is categorized under NAICS code 335132, with the place of performance located in Fort Polk, Louisiana.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Refrigeration Condenser Coils (NSN 4130017354868)This subcontract involves the manufacture or procurement of two specialized refrigeration condenser coils, specifically Johnson Controls Navy Systems part number 377-49934-000, to support DLA supply contracts for the USS Jeremiah Denton and USS Ted Stevens. The work is performed under NAICS code 335132 and is managed by the Department of Defense in Norfolk, Virginia, with the place of performance located in Pascagoula, Mississippi. The contractor must strictly adhere to the DIA Master List of Technical and Quality Requirements and comply with DFARS Buy American standards. Notably, the use of additive manufacturing processes is prohibited for the production of these units. Interested parties must respond by November 2, 2026.

POSTED

DEADLINE

FIXTURE, LIGHTING

Solicitation # SPE4A6-26-R-X796

This Indefinite Delivery Purchase Order, solicitation number SPE4A6-26-R-X796, is a total small business set-aside for the procurement of lighting fixtures, specifically part number 6210-00-474-5653. Designated as a critical application item, the requirement is governed by basic specification MIL-DTL-16377/13B and reference specification MIL-DTL-16377K. The contract is a firm fixed price agreement with a base period of two years, remaining valid until the aggregate total of orders reaches 350,000 dollars. The primary quantity is listed as 140 units, though amended documents indicate an estimated annual demand of 150 units with a guaranteed minimum of 75 units. Delivery is scheduled for various CONUS stock locations with a total lead time of 524 days after receipt of order, which includes 90 days for first article testing, 60 days for government review, and 374 days for production. Quality assurance requires compliance with ISO 9001:2015 and sampling according to MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and RP001, with marking following MIL-STD-129. The contract strictly prohibits the use of mercury or mercury compounds in preservation and packaging. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

FIXTURE, LIGHTING

Solicitation # SPE4A6-27-T-5790

Solicitation SPE4A6-27-T-5790 is issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for the procurement of 23 lighting fixtures, identified by NSN 6210-01-459-6609. The contract requires the items to be delivered FOB Origin to the Distribution Depot Puget Sound in Bremerton, Washington, with a delivery period of 165 days. The need ship date is April 13, 2027, and the original required delivery date is August 18, 2027. Inspection and acceptance will occur at the destination. Technical and quality requirements must conform to the listed drawings and the DLA Master List, including specific mandates for source approval requests, covered defense information, and CMMC Level 2 certification. The contract is subject to strict export controls under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification. Packaging must adhere to MIL-STD-2073-1E and RP001, with marking following MIL-STD-129 and a specific fragile designation. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. This is not a small business set-aside and includes compliance with the Buy American Act and the Berry Amendment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Traffic Signals

Solicitation # 12557

The City of Greensboro is soliciting bids under solicitation number 12557 for the procurement of yellow traffic signals for its Transportation Department. The scope of work requires the provision of adjustable face vehicular traffic signal heads, including three and four section heads delivered in a stack configuration. All signal heads must be delivered fully assembled, although signal visors may be shipped separately to prevent damage. To be eligible for award, products must be approved by the North Carolina Department of Transportation and listed on the current NCDOT Qualified Products List. Additionally, performance must conform to the latest standards of the Institute of Transportation Engineers and the Manual On Uniform Traffic Control Devices. The contract will be awarded to the lowest responsive and responsible contractor who meets all minimum qualifications, including the complete and accurate submission of all bid components and adherence to non-discrimination policies. Bids must be submitted through the Greensboro eProcurement System by October 29, 2026, at 6:00 PM UTC, with a recommendation to submit 24 hours early to avoid technical interruptions. All submissions are subject to North Carolina Public Records laws. Primary contact for this event is Robin Spencer within Procurement Services.

City of Greensboro

POSTED

DEADLINE

Tactical Lighting and High-Pressure Cylinder RestraintsThis small business set-aside subcontract for the Department of Defense involves the installation of a multi-zone tactical lighting package and secure cylinder mounting for vehicle projects at W6QM Micc-Ft Drum. The scope of work includes routing IR marker lights, perimeter LED scene lighting, and a master blackout cut-off switch, as well as the fabrication and installation of positive-locking brackets designed for four SCBA cylinders rated up to 6,000 PSI. The project requires the delivery of fully installed tactical lighting and cylinder restraint assemblies. Interested parties should note the response deadline of October 28, 2026, and the classification under NAICS code 335132.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Supply of Panel, Light Indicator (NSN 6210008820016)This subcontract involves the manufacture or procurement of six Light Indicator Panels for prime contractors under the DLA Weapons Support ASC Commodities Division. The panels must be produced according to technical data drawings P/N 201-1135-2 or 201-11735-002 and delivered to San Diego. The contractor is responsible for bare item marking and packaging in accordance with MIL-STD-2073-1E and MIL-STD-129. Additionally, the project requires strict adherence to NAVARI Aircraft Launch and Recovery Equipment traceability and NAVSEA 5100-003D standards regarding mercury containment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Mil-Spec Connector and Wiring SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of mil-spec connectors, terminals, and branched wiring cables for prime contractors. The provider is responsible for sourcing all materials according to TDP Rev C Gen 3 reference drawings and delivering certified raw materials to the prime manufacturer. Key quality and regulatory requirements include the provision of Certificates of Conformance and strict adherence to the Buy American Act and domestic material restrictions. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335132, with performance taking place in New Cumberland. Interested parties must respond by October 28, 2026, to fulfill the requirements of this defense-related supply contract.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

PANEL, LIGHT INDICAT

Solicitation # SPE4A6-27-T-5606

Solicitation SPE4A6-27-T-5606, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of six light indicator panels (NSN 6210-00-882-0016). The contract requires delivery within 159 days after receipt of order, with an original required delivery date of July 13, 2027. Delivery is set as FOB Origin, with the final destination being DLA Distribution San Diego, California. This is not a small business set-aside, and the assigned NAICS code is 335132. The contract mandates strict adherence to technical and security standards, including CMMC Level 2 certification and compliance with ITAR or EAR export controls under DFARS 252.225-7048. Packaging must follow MIL-STD-2073-1E and RP001, while shipment marking must comply with MIL-STD-129. Bare item marking requires the contract number, NAWC CAGE, and part number. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASO H1331. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

LED Flood Lights

Solicitation # BD-27-2082-PMLP-PMLP-134603

The Peabody Municipal Light Plant is soliciting bids for the procurement of LED flood lighting fixtures to replace existing 250W and 400W HID fixtures within its distribution system. The requirement consists of approximately 150 units of 250W equivalent and 75 units of 400W equivalent LED floodlights. Technical specifications require the fixtures to feature an aluminum die cast enclosure with an integral heat sink, impact resistant tempered glass lenses, and a gray corrosion resistant polyester powder paint with a minimum thickness of 2.0 mil. Bids must be submitted using the provided Bid Form by November 5, 2026, at 11:00 AM, and should include firm pricing, applicable discount schedules, and references from three nearby customers for similar equipment. The contract is governed by the laws of the Commonwealth of Massachusetts and includes a provision allowing the purchaser to increase bid quantities up to twice the original amount. Deliveries must be made to the PMLP jobsite in Peabody, MA, between 8:00 AM and 3:00 PM, Monday through Friday, with a minimum of 48 hours advance notification. All shipments must be compatible with fork truck offloading and clearly marked with the purchase order number on all shipping documentation. Payment of 100 percent of the quoted price will be approved within 30 days following delivery and successful inspection. Bidders must certify non-collusion and tax compliance under penalties of perjury, and the selected vendor must adhere to OSHA standards and Executive Order 11246.

PMLP - Peabody Municipal Light Plant

POSTED

DEADLINE

Flood Area Lights

Solicitation # 282

The Jefferson Parish Government of Louisiana has issued solicitation number 282 for the procurement of flood area lights to support the Woodland West Light Project for the Jefferson Parish Recreation Department. The solicitation was posted on October 20, 2026, with a response deadline of October 26, 2026. Gideon Koenig serves as the primary point of contact for this local government acquisition. The technical requirements specify the procurement of product model MISC LFX-XXL-400-600W-50K-SC. These lights must operate on a voltage of 120-277V AC/50-60Hz and provide a maximum of 84,000 lumens, with wattage options available at 400W, 500W, or 600W. No specific contract value, delivery schedule, or evaluation criteria were provided in the available documentation.

Jefferson Parish Government

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects within the Department of Defense. The scope of work involves performing specialized military-grade packaging and marking for small hardware components, strictly adhering to MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA Packaging Requirements. Technical execution requires the use of specific methods including QUP :001, PRES MTHD :10, and CLNG/DRY :1, as well as a professional knowledge of ANSI X12 unit of issue protocols to ensure shipments are fully prepared for CONUS transport. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 493110. Interested parties must note the response deadline of October 29, 2026. The contract is managed through the DLA Weapons Support ASC Commodities Division and focuses on delivering ready-to-ship, compliant military packaging solutions.

General Warehousing and Storage

POSTED

about 2 hours ago

DEADLINE

Manufacturer of Zinc-Coated Swaging Sleeves (NSN 4030-00-431-5537)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the manufacture and delivery of 680,000 precision-manufactured wire rope swaging sleeves under NSN 4030-00-431-5537. The components must be produced according to SAE AMS-C-81562, Type I, Class 6 standards and feature a zinc coating compliant with ASTM B633 Type I, FE/ZN5. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510. Strict regulatory and security compliance is mandatory for this project, including adherence to ITAR, EAR, and the US/Canada Joint Certification Program. Additionally, the contractor must meet CMMC Level 2 cybersecurity standards to ensure the protection of sensitive information. The response deadline for this requirement is October 29, 2026.

Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

BEARING, ROLLER, TRACK R

Solicitation # SPE4A6-27-T-6096

Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-5992

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

WIRING HARNESS, BRANCHE

Solicitation # SPE4A6-27-T-6171

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-5961

Precision Turned Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-5951

Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

WASHER, SHOULDERED

Solicitation # SPE4A6-27-T-6016

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

NOZZLE ASSEMBLY

Solicitation # SPE4A6-27-T-5985

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 2 hours ago

DEADLINE

CABLE ASSEMBLY, RADIO F

Solicitation # SPE4A6-27-T-5857

Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-5815

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

SCREW, CAP, SOCKET HEAD

Solicitation # SPE4A6-27-T-6147

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS