Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing and Supply of Shouldered Shafts

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacturing and supply of five precision-machined shouldered shafts for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations for wheeled vehicles. The contractor is required to utilize precision CNC equipment to meet the specifications defined by NSN 3040017244052, ensuring all deliverables are finished, marked, and packaged according to strict guidelines. Compliance is mandatory regarding DLA RA001 quality requirements and MIL-STD-129 marking standards. Additionally, the provider must adhere to the Buy American Act and follow all prohibitions regarding hexavalent chromium. Performance for this contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

General Info

Manufacture and supply five precision-machined shouldered shafts for the Department of Defense.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

NAICS

332710 - Machine Shops

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L2-27-T-0050.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHAFT, SHOULDERED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies precision-machined shouldered shafts for prime contractors delivering DLA supply contracts. Machines shafts to specifications defined by NSN 3040017244052 using precision CNC equipment. Ensures compliance with DLA RA001 quality requirements and MIL-STD-129 marking standards. Adheres to Buy American Act and hexavalent chromium prohibitions. Delivers five finished, marked, and packaged shouldered shafts.

Similar Contracts

Same NAICS industry code

Supply of Metal Tube Assemblies (NSN 4710016532686)This subcontract with the DLA Weapons Support Fluid Handling Division involves the manufacture or procurement of eight metal tube assemblies under NSN 4710016532686. The contractor is responsible for utilizing metal fabrication and quality assurance testing equipment to deliver the completed units to Tinker AFB. Strict adherence to quality and documentation standards is required, specifically performing sampling and inspection according to MIL-STD-1916 or ASQ H1331 Table 1. Additionally, the provider must ensure all supply chain traceability documentation meets the requirements established in August 2016.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

Manufacturing of Sleeve Bushings (NSN 5365-01-622-5565)This subcontract involves the precision CNC machining of 12 sleeve bushings under NSN 5365-01-622-5565 for the Department of Defense, specifically the DLA Weapons Support ASC. The selected manufacturer must execute a First Article Test within 90 days and ensure all deliverables comply with MIL-STD-129 and MIL-STD-2073-1E standards. Final delivery of the finished units is required at the DLA Distribution Depot in Hill, Utah. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification, be part of the US/Canada Joint Certification Program, and maintain CMMC Level 2 compliance. The project falls under NAICS code 332710, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Precision Machining/Fabrication of Vehicular Component BracketThis subcontract involves the precision machining and fabrication of one Vehicular Component Bracket, identified by NSN 2590-01-674-1574, for the DLA Weapons Support Land Supply Chain. The selected provider must utilize CNC milling or turning to manufacture the bracket according to the specific dimensions and tolerances outlined in the RA001 technical requirements. To be eligible, contractors must hold ISO 9001:2015, CMMC Level 2, and US/Canada Joint Certification Program certifications. The project falls under NAICS code 332710 and requires the delivery of one finished component. Responses are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Precision Machining and Fabrication of Ground Adapter FittingsThis subcontract involves the precision machining and fabrication of 14 Ground Adapter Fittings, identified by NSN 1730-01-290-3964, for prime contractors supporting DLA Troop Support procurement projects. All work must be performed according to the provided technical data package, with a strict prohibition against the use of additive manufacturing. The project is managed under the Department of Defense and falls under NAICS code 332710, with performance located in New Cumberland. To ensure the security of export-controlled technical data, the contractor must maintain CMMC Level 2 certification and full ITAR and EAR compliance. All finished fittings must meet rigorous DLA technical specifications. Interested parties must respond by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

Manufacturing of Brake Disc (NSN 2530-01-713-9297)This subcontract involves the manufacture of one high-precision brake disc, identified by NSN 2530-01-713-9297 and Part Number 627-8476-003, for the DLA Weapons Support Land Supply Chain. The project requires precision machining and grinding performed to Oshkosh Aerotech specifications using high-tolerance CNC machining centers. To qualify, the provider must obtain engineering source approval from the Government Design Control Activity. The contract is categorized under NAICS code 332710 and mandates strict adherence to NIST SP 800-171 and DFARS 252.204-7012 cybersecurity and data protection standards. Performance will take place in Santa Rita, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Manufacture and Supply of Shaft Sleeves (NSN 3950-01-137-0937)This subcontract involves the manufacture and supply of 32 precision-machined shaft sleeves, identified by NSN 3950-01-137-0937, for Garner-Denver hoist models. The components are produced for prime contractors supporting DLA Troop Support contracts under NAICS code 332710. Performance will take place in New Cumberland, Pennsylvania, with the final delivery of all units handled as FOB Origin. The contractor must adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Additionally, the agreement requires full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regulations to ensure all legal and security requirements for Department of Defense procurement are met.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

Hook Assembly Fabrication and AssemblyThis subcontract, titled Hook Assembly Fabrication and Assembly, involves the precision machining, fabrication, and final assembly of 150 Towbar Hook Assemblies for DLA aerospace hardware projects. The work must be performed according to Basic Drawing NR 30003 1479AS105 Revision D, utilizing CNC machining and assembly jigs, and includes the application of Loctite to self-locking set screws. The project is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332710, with performance taking place in Jacksonville. The contractor is required to maintain strict compliance with MIL-STD-105/ASQ Z1.4, MIL-STD-1916, and NIST SP 800-171 standards. The final deliverables consist of 150 completed Hook Assemblies under NSN 1730-00-072-8672. This Department of Defense effort was posted on October 28, 2026, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

Precision Component Manufacturer for Jack KitsThis subcontract involves the precision manufacture of individual components, including seals, valves, pins, and housings, specifically for NSN 1730-01-206-1707. The selected manufacturer will utilize CNC machining, casting, or molding to produce parts that adhere to Critical Application Item standards and Columbus Jack Corp P/N 1589 technical data. All finished components must be delivered to a prime integrator along with required certificates of conformance to support DLA Troop Support supply contracts. Managed under NAICS code 332710 for the Department of Defense, the work is to be performed in New Cumberland. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

Specialized Component Supply for Retractor AssemblyThis subcontract involves the supply of precision machined components, springs, or fasteners for prime contractors supporting Department of Defense DLA supply contracts. The scope of work specifically requires the manufacture of individual piece numbers for part number 556AS164-3, adhering to the specifications outlined in TDP Rev A Gen 1. Deliverables include either individual machined parts or complete hardware kits, with a strict requirement for material certifications and mill test reports for all metals used. The contract is managed under NAICS code 332710 and mandates full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 9, 2026, for this specialized component supply effort related to retractor assemblies.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

Fabrication of Vehicular Component Brackets (LH)This subcontract involves the fabrication of 429 Left Hand Vehicular Component Brackets for the Department of Defense under the DLA Weapons Support Land Supply Chain. The selected contractor must manufacture these components in strict accordance with drawing 19207 12664366-2 using precision forming or machining equipment. To ensure quality and regulatory compliance, the provider must hold an ISO 9001:2015 certification and adhere to DFARS specialty metal requirements 252.225-7008, 252.225-7009, and 252.225-7010. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 332710. Interested parties must submit their responses by November 12, 2026. The final deliverables must meet all technical specifications and be delivered to the prime contractor for integration into the larger project.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Fabrication of Metal Tube Assembly (NSN 4710-01-651-8603)This subcontract involves the fabrication and supply of one custom metal tube assembly, identified by NSN 4710-01-651-8603 and part number LS1121349, for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The scope of work requires precision machining, bending, and welding of metal tubing, necessitating the use of CNC tube benders and TIG/MIG welding equipment. Performance will take place in Ft Carson, Colorado. The contractor must strictly adhere to the Berry Amendment and the DLA Master List of Technical and Quality Requirements RA001. This opportunity falls under NAICS code 332710 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

Precision Fabrication of Wing Fold Jury GageThis subcontract involves the precision machining and fabrication of a Wing Fold Jury Gage, specifically designed to meet Northrop Grumman part number 123GT10191 specifications. The project requires the use of CNC milling, turning, and CMM measurement to ensure proper calibration and certification. The final deliverable is one calibrated gage that adheres to all DLA Technical and Quality Requirements. The work is being performed for the Department of Defense via the DLA Receiving Officer at Naval Base Coronado in San Diego. To be eligible, the contractor must hold ISO 9001 or AS9100 certification. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, falling under NAICS code 332710.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

Same awarding agency

Manufacture and Supply of Shoulder Shafts (NSN 3040-01-724-4052)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Wheeled Vehicles, requires the manufacture and supply of 10 precision-machined shoulder shafts for NSN 3040-01-724-4052. The contractor is responsible for fabricating the shafts using CNC lathes and grinding equipment to meet strict dimensions and tolerances. All deliverables must comply with MIL-STD-129 and DLA Packaging Requirement RP001, while operations must adhere to the Hazard Communication Standard 29 CFR 1910.1200. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710, with performance taking place in New Cumberland. Interested parties must respond by November 9, 2026. The final delivery consists of 10 fully packaged and labeled units intended for prime contractors fulfilling DLA supply contracts.

POSTED

about 20 hours ago

DEADLINE

SHAFT, SHOULDERED

Solicitation # SPE7L2-27-T-0053

Solicitation SPE7L2-27-T-0053 is a total small business set-aside issued by the DLA Weapons Support Land Supplier Operations Wheeled Vehicles for the procurement of 10 shoulder shafts, identified by NSN 3040-01-724-4052 and Hamilton Sundstrand Corporation part number 1714148. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of October 31, 2027, and a need ship date of August 1, 2027. Delivery is specified as 264 days after order, with inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging. Environmental and security compliance is mandatory, specifically the prohibition of Class I ozone-depleting chemicals and adherence to CMMC Level 2 self-assessment and safeguarding of covered defense information. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. This acquisition is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and includes various DFARS and FAR clauses regarding domestic sourcing, cybersecurity, and hazardous material labeling.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services supports the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Wheeled Vehicles. The selected provider will perform specialized military packaging, marking, and shipping for prime contractors, ensuring all components strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and SPI 12423169 instructions. Key operational requirements include coordinating First Destination Transportation to DLA Distribution DDSP New Cumberland and utilizing the DLA Wide Area WorkFlow system for all necessary documentation. The scope of work concludes with the final delivery of packaged units and their corresponding shipping documents to the designated performance location in New Cumberland.

Freight Transportation Arrangement

POSTED

DEADLINE

Intake Air Cleaner Supplier (Donaldson Authorized)This subcontract involves the supply of seven genuine Donaldson Companies Intake Air Cleaners, identified by NSN 2940-01-529-4213, for the Department of Defense under the DLA Weapons Support Land Supplier Operations Wheeled Vehicles project. The selected supplier must deliver the units to DLA Distribution DDSP in New Cumberland, Pennsylvania. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality certification and hold an approved US/Canada Joint Certification Program certification for handling ITAR/EAR technical data. Additionally, all supplies must strictly comply with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is November 9, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

First Destination Transportation (FDT) ServicesThis subcontract for First Destination Transportation services involves the hauling of palletized connecting links from the manufacturer to DLA Distribution in Warner Robins, Georgia. The selected provider must utilize freight transport vehicles capable of handling palletized shipments in strict accordance with the First Destination Transportation program requirements to ensure materials are delivered by the specified dates. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations for Wheeled Vehicles, the contract falls under NAICS code 484121. The place of performance is located at Robins Air Force Base, and the response deadline for this opportunity is November 9, 2026.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Supply of Rigid Connecting Links (NSN 3040003889923)This subcontract involves the manufacture or sourcing of rigid connecting links, identified by NSN 3040003889923, to support prime contractors fulfilling DLA supply contracts. The contractor must adhere to the DLA Master List of Technical and Quality Requirements and ensure all items are packaged according to ASTM D3951, marked per MIL-STD-129, and palletized following RP001 standards. Final physical components are to be delivered to DLA Distribution in Warner Robins, Georgia. The agreement requires strict adherence to Buy American compliance and a CMMC Level 2 self-assessment. Managed under NAICS code 333613 for the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations for Wheeled Vehicles, the opportunity was posted on October 27, 2026, with a response deadline of November 9, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

AIR CLEANER, INTAKE

Solicitation # SPE7L2-27-T-0051

Solicitation SPE7L2-27-T-0051 is a small business set-aside issued by the DLA Weapons Support Land Supplier Operations Wheeled Vehicles for the procurement of seven intake air cleaners, identified by NSN 2940-01-529-4213. This is a source-controlled procurement requiring offers specifically for Donaldson Companies. The required delivery date is August 14, 2027, with a delivery timeline of 274 days after receipt of order. Shipping is conducted under the First Destination Transportation program with FOB Origin terms, delivering to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract contains stringent technical and quality requirements, including mandatory compliance with SAE AS9003 or ISO 9001 standards. Because the item involves export-controlled technical data subject to ITAR or EAR regulations, eligible offerors must possess an approved US/Canada Joint Certification Program certification and DLA authorization. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and specific SPI 12423169 instructions. Administrative requirements include electronic invoicing via Wide Area WorkFlow and adherence to the Buy American Act and Berry Amendment for domestic sourcing. Inspection and acceptance are both designated at the point of origin.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

CONNECTING LINK, RIG

Solicitation # SPE7L2-27-T-0052

This procurement, issued by the DLA Weapons Support Land Supplier Operations Wheeled Vehicles, is for the supply of 13 rigid connecting links (NSN 3040003889923) used on F-15A and TF-15A aircraft. The components consist of an aluminum alloy tube with two steel rod ends, measuring 13.890 inches in overall length and 1.50 inches in tube diameter, identified by Tyee Aircraft Inc part number 4501-251. The required delivery date is March 20, 2028, with a delivery lead time of 496 days after order. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over the general packaging standard ASTM D3951. All shipments must be marked and labeled per MIL-STD-129 and palletized according to RP001. Compliance requirements include a CMMC Level 2 self-assessment, the Buy American and Balance of Payments Program, and the use of the Wide Area WorkFlow system for electronic invoicing. The solicitation is categorized under NAICS code 333613 and may be eligible for automated award, with a price evaluation preference for HUBZone concerns.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

SHAFT, SHOULDERED

Solicitation # SPE7L2-27-T-0050

Solicitation SPE7L2-27-T-0050 is issued by the DLA Weapons Support Land Supplier Operations Wheeled Vehicles for the procurement of five shouldered shafts, identified by NSN 3040-01-724-4052 and Hamilton Sundstrand Corporation part number 1714148. The required delivery date is August 16, 2027, with a delivery period of 279 days after the order. Delivery is FOB Origin, and the items are to be shipped to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging (ASTM D3951 and RP001), marking (MIL-STD-129), and the removal of government identification from non-accepted supplies (RQ011). Compliance with cybersecurity standards is required, specifically CMMC Level 2 self-assessment and safeguarding of covered defense information. Additionally, the use of Class I ozone-depleting chemicals is prohibited. Payment and invoicing must be processed electronically through the Wide Area Workflow system.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Supply of Spin-On Transmission Filter Assemblies (NSN 2590011802806)This subcontract involves the supply of 31 spin-on transmission filter assemblies, specifically NSN 2590011802806, which are compatible with the J.I. Case Scoop Loader Type MW24C. The contract is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations for Wheeled Vehicles. All units must be delivered FOB Origin to the DLA Distribution DSP New Cumberland Facility in Pennsylvania. The contractor is required to adhere to strict technical and regulatory standards, including packaging per ASTM D3951, marking per MIL-STD-129, and palletization per RP001. Additionally, the provider must ensure full compliance with the Buy American and Balance of Payments Program. The procurement falls under NAICS code 336350.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

DEADLINE

Raw Material Supply for Shaft AssemblyThis subcontract involves the supply of high-grade industrial alloys or steel raw material stock for shaft assemblies, specifically supporting prime contractors on DLA supply contracts. The provider is responsible for sourcing and certifying materials according to the technical data for NSN 3040-01-593-7423 and must provide Material Test Reports to verify all necessary chemical and physical properties. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations for Wheeled Vehicles, the contract falls under NAICS code 332111. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026.

Iron and Steel Forging

POSTED

DEADLINE

Precision Machined Shaft Assembly FabricationThis subcontract involves the fabrication of a precision machined straight shaft assembly for prime contractors under DLA supply contracts. The project requires the use of CNC lathes and precision grinding equipment to perform turning, milling, and grinding operations, ensuring the final product meets the strict tolerances specified for NSN 3040-01-593-7423. All work must adhere to the associated technical data package, with packaging and labeling compliant with MIL-STD-129. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations for Wheeled Vehicles, the contract falls under NAICS code 332710. The place of performance is located in New Cumberland, Pennsylvania. The scope of work culminates in the delivery of one completed straight shaft assembly.

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacturer of Packing with Retainer (NSN 5330-01-271-8668)

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Precision Machining and Fabrication of Pipe-to-Tube Adapter

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Precision Machined Components for Universal Puller Kit

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Machining and Assembly of Extractor Housings

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Fabrication of Mechanical Drive Guards

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Tube Guide Fabrication

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Rigid Metal Conduit Assembly Manufacturing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Fabrication of Mounting Plates (NSN 5340-01-560-4979)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Pipe-to-Tube Tees (NSN 4730016740820)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing and Supply of Adapter, Guide (NSN 4920011468286)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Pressure Transmitter Brackets (NSN 1560-00-226-1779)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Machine Keys (NSN 5315010548527)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS