Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing and Supply of Special Shaped Nonmetallic Seals

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacturing and supply of 172 nonmetallic special shaped section seals for the DLA Weapons Support Fluid Handling Division. Each seal must be fabricated to a length of 194 inches in strict accordance with Basic Drawing NR 81205 66-8871 and TDP Rev A Gen 1. Performance will take place at Tinker AFB, and the contractor is required to adhere to packaging standards MIL-STD-2073-1E and MIL-STD-129. To be eligible for this project, the provider must maintain JCP certification and CMMC Level 2 compliance. The opportunity is categorized under NAICS code 326220, with a response deadline set for October 19, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

326220 - Rubber and Plastics Hoses and Belting Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-0491.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, NONMETALLIC SP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies nonmetallic special shaped section seals for prime contractors on DLA Weapons Support Fluid Handling Division projects. Fabricates seals with a 194-inch length per Basic Drawing NR 81205 66-8871 and TDP Rev A Gen 1. Requires JCP certification and CMMC Level 2. Packages items per MIL-STD-2073-1E and MIL-STD-129. Delivers 172 completed seals.

Similar Contracts

Same NAICS industry code

HOSE, AIR BREATHING

Solicitation # SPE7M4-27-T-0591

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-18N5

Solicitation SPE7L1-26-T-18N5 is a Request for Quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of 500 O-rings (NSN 5331-01-031-8205). Designated as a critical application item, the hardware must be manufactured according to Basic Drawing NR 53711 2505679, Revision R, and must be free of asbestos. Delivery is required by April 8, 2027, with a need ship date of March 23, 2027, to DLA Distribution San Joaquin in Tracy, California. Due to ultraviolet sensitivity, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and marked according to MIL-STD-129 with a do not bend warning. The procurement incorporates strict regulatory and security requirements, including CMMC Level 2 certification and adherence to ITAR or EAR export controls for technical data. Offerors must comply with the Buy American Act and the Berry Amendment, with specific price evaluation preferences available for certified HUBZone small businesses. Quality assurance is managed through destination inspection using zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. All quotes must be submitted via the DIBBS portal by October 9, 2026, and successful contractors are required to use the Wide Area WorkFlow system for invoicing and payment.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-892G

The contract pertains to the procurement of a V-belt, identified by NSN 3030-01-507-3052 and part number 1841561C1 and 3543928C1, with a quantity of 21 units, under solicitation SPE7L1-26-T-892G. Delivery is required within 20 days from the contract award, with FOB origin terms, and no variance in quantity is permitted. Inspection and acceptance occur at origin, and packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and markings per MIL-STD-129. The item is subject to DLA’s Master List of Technical and Quality Requirements, which dictate all technical and quality standards referenced by R or I numbers. The end recipient is the Jordanian Armed Forces Headquarters in Amman, with Serra International Inc. designated as the freight forwarder. The contract stipulates no special marking requirements and specifies the original required delivery date as August 4, 2026. All performance and compliance terms are governed by DLA policies, and the acquisition is classified under NAICS code 326220 with the Department of Defense as the overseeing agency through the Land Supply Chain office.

LAND SUPPLY CHAIN

POSTED

DEADLINE

QPL Nonmetallic Hose Assembly Manufacturing

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-0525

Solicitation SPE7M4-27-T-0525 is a fixed-price, total small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of 108 nonmetallic hose assemblies, identified by NSN 4720016067775. The contract requires delivery to DLA Distribution San Joaquin in Tracy, California, with an original required delivery date of November 29, 2026, and a need ship date of February 2, 2027. Delivery is established as FOB Origin, with both inspection and acceptance also occurring at the point of origin. The manufacturer's inspection system must comply with ISO 9001:2015 or an equivalent standard. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. The contract incorporates various FAR and DFARS clauses, including mandates for combating trafficking in persons, safeguarding covered defense information, and compliance with the Buy American Act and Berry Amendment. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. Quotations are due by October 19, 2026, and must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONME

Solicitation # SPE7M4-27-T-0529

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-0598

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M0-26-T-102C

Solicitation SPE7M0-26-T-102C is a request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of one nonmetallic hose assembly, NSN 4720-01-661-8637, with a length of 142.500 inches. The requirement is categorized under NAICS 326220 and specifies a delivery timeline of five days after order. Delivery is FOB Destination, with the final destination located in Hohenfels, Germany. The procurement incorporates the DLA Master Solicitation for Automated Simplified Acquisitions and may be eligible for automated award. The contract mandates strict adherence to several technical and security standards, including MIL-STD-130 for physical identification, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Contractors must maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard. Security requirements are significant, requiring CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Compliance with domestic sourcing laws is required, specifically the Buy American Act and the Berry Amendment. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals. Offerors must also represent that they will not provide covered telecommunications equipment or services. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. A price evaluation preference is available for certified HUBZone Small Business Concerns.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

PARTS KIT, SEAL REPLACE

Solicitation # SPE7L1-27-U-0042

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M2-27-T-0028

Solicitation SPE7M2-27-T-0028, issued by the DLA Weapons Support Nuclear Reactor Program, is for the procurement of 41 nonmetallic hose assemblies (NSN 4720002042092). This is a performance review institute QML or QPL item that must be manufactured or assembled by an accredited provider. The items are subject to strict technical and quality requirements, including NAVAIR aircraft launch and recovery equipment traceability and specific bare item markings. A non-extendable shelf life of 120 months applies, requiring detailed markings for manufacture and expiration dates per MIL-STD-129. The contract mandates strict environmental and safety compliance, specifically prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury compounds in the hardware, preservation, or packaging. Delivery is required within 252 days, with a final required delivery date of September 5, 2027, shipped FOB Origin to DLA Distribution San Diego. Inspection and acceptance will occur at the destination. Contractors must adhere to rigorous security and administrative standards, including Cybersecurity Maturity Model Certification (CMMC) Level 2 and the safeguarding of covered defense information. Supply chain traceability documentation is required per DLA Directive Procurement Notes. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Additionally, the procurement is subject to the Buy American Act and the Berry Amendment, requiring disclosure of any non-domestic materials used.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-0602

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-0589

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-27-Q-0039

POSTED

DEADLINE

Solicitation # SPE7M4-27-Q-0040

Solicitation SPE7M4-27-Q-0040 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 10 units of Shaft, Subassy (NSN 1420-00-961-5009), corresponding to Eaton Aerospace LLC part number 257733. This procurement is designated as a total small business set-aside under NAICS code 336413. The required delivery date is 300 days after order award, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. The contractor must adhere to strict technical and quality standards, including packaging per ASTM D3951 and palletization according to RP001, with all DLA Master List requirements taking precedence. Marking and labeling must comply with MIL-STD-129. Key compliance mandates include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to various DFARS and FAR clauses regarding cybersecurity, foreign entity restrictions, and small business subcontracting. Invoicing and receiving reports are to be processed electronically via the Wide Area Workflow system. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Freight Services

Freight Transportation Arrangement

POSTED

DEADLINE

Nonmetallic Hose Assembly Production (NSN 4720-01-520-3644)

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Magnetic Machine Thread Plugs (NSN 5365002033914)This subcontract involves the manufacture and supply of 22,000 precision-machined magnetic machine thread plugs for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for producing or sourcing plugs that strictly adhere to Part Number A722 and NSN 5365002033914, utilizing specialized precision machining equipment to ensure exact thread accuracy. All delivered units must be marked according to MIL-STD-129 and packaged in compliance with ASTM D3951 standards. The performance of this contract is centered at Hill AFB, with a response deadline set for October 19, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Aerospace Coating and Non-Destructive Testing (NDT)

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Aerospace Grade Tubing and Fitting Supply

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Nacelle Tube Assembly Manufacturing

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Copper Alloy Pipe NipplesThis subcontract involves the supply of 40 copper alloy pipe nipples, identified by NSN 4730-00-196-2021, for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing these components to ensure they meet the ASTM specifications for brass, copper, and chromium-plated pipe nipples, as well as the DLA Master List of Technical and Quality Requirements RA001. The project is categorized under NAICS code 332999 and requires delivery FOB Origin to Tracy, zip code 95304-5000. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

MIL-STD-129 Packaging and Labeling Services

Motor Vehicle Towing

POSTED

DEADLINE

Fabrication of Drip Pans (NSN 4940014196444)

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS