Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing of Branched Wiring Harnesses (NSN 6150-01-633-4902)

Active

Federal

Response Deadline11/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacturing of high-reliability branched wiring harnesses, identified by NSN 6150-01-633-4902, for prime contractors supporting Department of Defense DLA supply contracts. The fabrication process must strictly follow Basic Drawing 30554 04-20010 Revision J and utilize QPL/QML components. All deliverables must comply with MIL-STD-2073-1E and MIL-STD-129 standards, as well as any tailored higher-level quality requirements, with final delivery made to DLA Depots. Managed by the ASC Commodities Division, this opportunity is designated as a Total Small Business Set-Aside under NAICS code 335999. The solicitation was posted on September 28, 2026, with a response deadline of November 8, 2026.

General Info

Small business subcontract for manufacturing high-reliability branched wiring harnesses for DoD DLA contracts.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing

Place of Performance

USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A6-26-R-XE37.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WIRING HARNESS, BRANCHED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 28

subcontract

Response DeadlineNov 8

Submission deadline

Response Deadline

11/08/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures branched wiring harnesses for prime contractors delivering DLA supply contracts. Fabricates high-reliability electrical assemblies per Basic Drawing 30554 04-20010 Revision J using QPL/QML components. Adheres to MIL-STD-2073-1E and MIL-STD-129 standards and tailored higher-level contract quality requirements. Delivers finished Branched Wiring Harnesses (NSN 6150-01-633-4902) to DLA Depots.

Similar Contracts

Same NAICS industry code

Voltage Regulator Subassembly Supplier

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Wiring Harness, BRAN (NSN 6150-01-589-8277)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacturer of Branched Wiring Harnesses (NSN 6150-00-884-2069)This subcontract opportunity, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, seeks a manufacturer to provide 240 branched wiring harnesses. The contractor is responsible for the fabrication and assembly of units according to NSN 6150-00-884-2069 specifications, ensuring all items are marked per RQ017 and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The contract is designated as a total small business set-aside under NAICS code 335999. To be eligible, providers must hold ISO 9001:2015 certification, maintain ITAR/EAR export authorization, and possess CMMC Level 2 certification verified via a C3PAO. Responses are due by November 8, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Battery Power Supply (NSN 6130015667467)

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of Special Purpose Electrical Cable AssembliesThis subcontract with the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, involves the manufacture and supply of 57 special purpose electrical cable assemblies under NSN 5995-01-674-3731. The selected provider is responsible for fabrication, performing First Article Testing, and ensuring bare item marking according to RQ017 standards. Final deliverables must include all FAT documentation and adhere to MIL-STD-2073-1E packaging requirements. To qualify, contractors must maintain ISO 9001 or SAE AS9003 quality systems and demonstrate CMMC Level 2 certification. Strict adherence to ITAR and EAR compliance is mandatory. The performance of this contract will take place in New Cumberland, Pennsylvania, with a response deadline set for November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Sleeve Bushings (NSN 3120-01-168-1854)This subcontract involves the manufacture or procurement of seven sleeve bushings, identified by NSN 3120-01-168-1854, to support prime contractors fulfilling DLA supply contracts. The selected provider must ensure all units meet the required technical specifications and adhere strictly to RP001 DLA Packaging Requirements for Procurement during the palletization process. The contract is issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division under NAICS code 335999. Performance will take place in Tracy, California, with a response deadline set for November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Junction Box (NSN 5975008812732)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires the manufacture or sourcing of six JACK BOX - J-1310/GTC-8 junction boxes. The contractor must ensure all units strictly adhere to NSN 5975008812732 technical specifications and DLA technical data, specifically complying with ECO 77C070, EO 02C0108-H, and 02C0111-H. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335999, with performance taking place in New Cumberland, Pennsylvania. Interested parties must respond by November 6, 2026, to provide these specialized components for prime contractors supporting Defense Logistics Agency supply contracts.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Supply of Electrical Connector Cable Clamps (NSN 5935-01-184-7189)This subcontract involves the supply of 1,134 electrical connector cable clamps for prime contractors working on Department of Defense procurement projects under the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for manufacturing or sourcing clamps that strictly adhere to NSN 5935-01-184-7189 specifications, ensuring all items are marked according to MIL-STD-129 and packaged for First Destination Transportation. Performance for this contract will take place in San Diego, California. To be eligible, the provider must possess a valid CAGE code and Unique Entity Identifier. The solicitation was posted on October 29, 2026, with a response deadline set for November 9, 2026, falling under NAICS code 335999.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Wiring Harness Fabrication and Assembly (NSN 5995-01-705-8842)This subcontract opportunity with the DLA Weapons Support ASC Commodities Division involves the fabrication and assembly of 50 complete wiring harnesses under NSN 5995-01-705-8842. The contractor is responsible for manufacturing assemblies according to TDP Rev B Gen 2 and Basic Drawing NR 19207 12610418 Revision B, which includes performing First Article Testing and ensuring all final products are packaged in accordance with MIL-STD-2073-1E. The project is a total small business set-aside under NAICS code 335999. To be eligible, contractors must maintain ISO 9001:2015, CMMC Level 2, and JCP certifications to handle export-controlled data. Interested parties must submit their responses by November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Branched Wiring Harness Fabrication

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Supply of Light Indicators (NSN 6210-01-686-4475)This subcontract involves the manufacture or sourcing of light indicator components, specifically NSN 6210-01-686-4475, to support prime contractors fulfilling Department of Defense supply contracts. The contractor is required to ensure all items are marked in strict accordance with MIL-STD-129 standards. Administrative processes, including quoting and invoicing, must be managed through the DIBBS and WAWF systems. The physical components are to be delivered to the DLA Distribution DDSP New Cumberland Facility located in New Cumberland, Pennsylvania. This procurement falls under NAICS code 335999, with a response deadline set for November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Supply of Electrical Contacts (NSN 5999-01-722-0182)This subcontract involves the supply of 50 units of electrical contacts, specifically NSN 5999-01-722-0182, to support prime contractors working on projects for the Naval Surface Warfare Center, Panama City Division. The work is managed under the Department of Defense through the DLA Weapons Support Active Devices Division, with performance taking place in Panama City Beach, Florida. The supplier is required to adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Additionally, the contract mandates full compliance with the Buy American Act and the Hazard Communication Standard 29 CFR 1910.1200. The procurement falls under NAICS code 335999.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Supply of Sleeve Bushings (NSN 3120017230622)

POSTED

about 7 hours ago

DEADLINE

RF Cable Assembly Supplier (NSN 5995-01-480-2027)

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Sleeve Bearing (NSN 3120012862547)

Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

BEARING, SLEEVE

Solicitation # SPE4A6-26-T-23MT

Solicitation SPE4A6-26-T-23MT is a small business set-aside issued by the DLA Aviation ASC Commodities Division for the procurement of one sleeve bearing, identified by NSN 3120012862547 and part number 706B0165-C040A. This critical application item must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania within 135 days after the order is placed. The procurement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and requires adherence to specific technical and quality standards, including ISO 9001:2015 for the manufacturer's inspection system. The contract mandates strict compliance with packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and incorporates DLA packaging requirements under RP001. Key restrictions include the prohibition of intentionally added mercury and compliance with the Buy American Act and Berry Amendment regarding domestic sourcing. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and registration in the System for Award Management. Inspection and acceptance will occur at the destination, and the contractor must adhere to various DFARS and FAR clauses concerning cybersecurity, whistleblower rights, and the safeguarding of covered defense information.

Ball and Roller Bearing Manufacturing

POSTED

about 7 hours ago

DEADLINE

SCREW, CAP, SOCKET HEAD

Solicitation # SPE4A6-26-T-31BV

Solicitation SPE4A6-26-T-31BV is a federal procurement issued by the Defense Logistics Agency for 11 units of socket head cap screws, identified by NSN 5305013843042. The contract is established under the First Destination Transportation program with delivery terms set as FOB Origin and a required delivery date of April 22, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The procurement is classified under NAICS code 332722 and incorporates various Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including those regarding the Buy American Act, combating trafficking in persons, and safeguarding covered defense information. Technical and quality requirements are governed by the DLA Master List, with specific sampling methods adhering to MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with a strict prohibition on the use of mercury or mercury compounds in preservation and marking. Invoicing and payment processing are required to be handled electronically through the Wide Area WorkFlow system. Offerors must maintain active registration in the System for Award Management and comply with domestic material restrictions, including the Berry Amendment where applicable.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

CABLE ASSEMBLY, RADI

Solicitation # SPE4A6-26-T-11XS

Solicitation SPE4A6-26-T-11XS is a fixed-price procurement issued by the DLA Aviation ASC Commodities Division for two radio frequency cable assemblies, identified by NSN 5995014802027 and C.E. Precision Assemblies P/N 53712-4. The items are designated as critical application items and must be delivered FOB Origin to DLA Dist San Joaquin in Tracy, California. The required delivery date is January 8, 2027, with a delivery timeline of 171 days after receipt of order. The contract mandates strict quality and security compliance, including a CMMC Level 2 Self-Assessment and adherence to the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331 with a zero-nonconformance acceptance criterion. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act and Berry Amendment. This is not a small business set-aside, and the NAICS code is 334419.

Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-T-35PF

Solicitation SPE4A6-26-T-35PF is a fixed-price contract issued by the Defense Logistics Agency for the procurement of two special purpose electrical cable assemblies, identified by NSN 5995-01-701-5363. The items are to be delivered FOB Origin to the 0426 CS BN CO A Distribution center at Fort Bliss, Texas, with a required delivery date of September 17, 2026, and a delivery window of five days after award. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contractor must adhere to strict quality and technical standards, including sampling methods per MIL-STD-1916 or ASQ H1331 and marking requirements per MIL-STD-129 and RQ017. Packaging must comply with MIL-STD-2073-1E and DLA requirements under RP001. Key compliance mandates include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information per DFARS 252.204-7012, and adherence to the Buy American Act and Berry Amendment. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

Current-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPE4A6-26-T-58B4

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

BEARING, SLEEVE

Solicitation # SPE4A6-26-T-22BS

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE4A6-26-T-22BS for the procurement of 13 sleeve bearings. The items are identified by NSN/Part Number 3120-00-775-5997 and are requested under purchase request 7017938978. This federal solicitation was posted on August 24, 2026, with a response deadline set for September 1, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

Ball and Roller Bearing Manufacturing

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-36YS

Solicitation SPE4A6-26-T-36YS is a fixed-price request for quotations issued by DLA Aviation, ASC Commodities Division, for the procurement of 16 track rollers (NSN 1440009336122). This requirement is intended for a Foreign Military Sales destination in Kaohsiung City, Taiwan, with a required delivery date of September 29, 2026, and a delivery window of 20 days after order. Inspection and acceptance will occur at the point of origin. Quotations must be submitted via DIBBS by October 5, 2026. The contract mandates strict adherence to technical and quality standards, including bare item marking per RQ017 and packaging and palletization according to MIL-STD-2073-1E and RP001. Quality assurance will be managed through zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Compliance requirements include a CMMC Level 2 Self-Assessment, Buy American Act and Berry Amendment adherence, and a prohibition on mercury compounds in packaging. Additionally, the government will not evaluate offers utilizing additive manufacturing, though certified HUBZone small businesses are eligible for price evaluation preferences.

Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-21WA

Solicitation SPE4A6-26-T-21WA is a fixed-price procurement issued by the DLA Aviation ASC Commodities Division for one sleeve bushing, identified by NSN 3120017230622. The item must be manufactured in accordance with reference drawing 63857 999C0941 and is intended for delivery to the Electric Boat Corporation in North Stonington, Connecticut. The original required delivery date is March 26, 2026, with a delivery timeframe of five days after receipt of order. Shipping is FOB Origin, and the contractor is required to use the fastest traceable means, specifically avoiding parcel post. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, such as the Buy American Act, the Berry Amendment, and cybersecurity protocols for safeguarding covered defense information. All quotes must be submitted through the DLA Internet Bid Board System.

Ball and Roller Bearing Manufacturing

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-32ZX

Solicitation SPE4A6-26-T-32ZX is issued by the Defense Logistics Agency (DLA) Aviation, ASC Commodities Division, for the procurement of one lock washer, identified by NSN 5310-01-555-9541. The item is classified as a critical application item and must be produced in accordance with TDP Rev B Gen 3, specifically Basic Drawing NR 97403 13211E8337 Revision J and Reference Drawing NR 03538 77A582755P4. Delivery is required within five days of award, with an original required delivery date of May 11, 2026, shipping FOB Origin to Camp Casey in Dongducheon, South Korea. Quality assurance is stringent, requiring inspection and acceptance at the origin. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. Sampling shall follow MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA requirement RP001. The contract incorporates several federal regulations, including the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS cybersecurity requirements. Invoicing and payment must be processed electronically through the Wide Area Workflow (WAWF) system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Cable Assembly, PONE (NSN 6150-01-685-8736)

ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

Navigational Air Light Manufacturer/Supplier

Defense Logistics Agency

POSTED

about 1 month ago

CLOSED

Supply of Circuit Breaker (NSN 5925013466173)

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 month ago

CLOSED

Alternative Electrical Component Manufacturer

ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

Special Purpose Electrical Cable Assembly (NSN 5995-99-507-5608)

ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

Supplier of Sensitive Switches (NSN 5930-01-718-7984)

ELECTRICAL DEVICES DIV

POSTED

about 1 month ago

CLOSED

Supply of Battery Charger Adapters (NSN 6130-01-518-7039)

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 month ago

CLOSED

Manufacturer of Electrical Component (NSN 016475068)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 month ago

CLOSED

Manufacture of Special Purpose Electrical Cable Assemblies (PN: 5995-01-659-2956)

ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

Supply of Electric Lanterns (NSN 6230-01-580-6472)

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 month ago

CLOSED

Supply of Cable Assembly, RADI (NSN 5995-01-395-5319)

ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

Electrical Solenoid Manufacturing and Supply

ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS