Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacturing of Collapsible JMIC 3.0K Units

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the manufacturing of 81 collapsible metal containers compliant with military specifications, requiring strict adherence to material standards, precise dimensional accuracy, and rigorous durability testing to ensure operational reliability under demanding conditions. These units are designated as JMIC 3.0K and must meet all technical and performance criteria established by military requirements for deployment and field use. The solicitation is issued as a subcontract under the NAICS code 332439, with a response deadline of August 3, 2026, and the performance location is specified as Camp Lejeune, North Carolina, with a zip code of 28542-0125. The contracting entity is part of the Department of Defense under the organization title Construction & Equipment Containers, and the procurement is publicly accessible via the DIBBS portal. All work must be completed in alignment with federal defense procurement protocols, and bidders must demonstrate capability in meeting the technical and quality assurance standards for military-grade containers.

General Info

Manufacture 81 military-compliant JMIC 3.0K containers for Camp Lejeune by August 3, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERSView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

CAMP LEJEUNE, NC, 28542-0125, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Production of 81 collapsible metal containers per military specifications, including material compliance, dimensional accuracy, and durability testing.

Similar Contracts

Same NAICS industry code

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVC05, issued by the Department of Defense through DLA Aviation at Philadelphia, pertains to the supply of shipping and storage containers governed by Drawing 838E001, Revision Latest, and referenced specifications including MIL-I-45208. The containers must be manufactured using rotational molding with polyethylene shell material and meet stringent quality and compliance requirements, including adherence to AWS welding standards for steel, aluminum, and stainless steel, and use of electrodeposited alkaline Zinc-Nickel Alloy finishes in place of cadmium plating. Each container must be affixed with a Unique Identification (UID) marking in data matrix format per MIL-STD-130, and a serial number formatted as “contract#_no_dashes-000X.” A First Article Test (FAT) is mandatory unless waived for previously approved suppliers who can demonstrate identical prior production within three years at the same facility using identical processes and without waivers or rejections. The contractor must submit one unit for FAT within 120 calendar days of contract award, and the government will conduct rigorous testing including dimensional inspection, initial and final leak tests at 0.25±0.05 PSIG, an 18-inch free-fall drop test, and form-and-fit verification using government-provided items. The cost of FAT testing, estimated at $12,000, is borne by the contractor, and any failure to comply may result in contract default. All testing components, including shipping and disposal, are the contractor’s responsibility, and rejected units must be corrected and resubmitted at the contractor’s expense. The contract imposes strict controls on materials and manufacturing processes: welding must follow specific filler alloys for aluminum (4043 or 5356/5556), and work stations must maintain clean, controlled environments to prevent contamination. Contaminants such as oils and waxes must be removed through approved cleaning methods, and chemical deoxidizing must occur no more than 10 days prior to welding (reduced to 3 days outdoors), followed immediately by mechanical cleaning using approved stainless steel tools to prevent galvanic corrosion. Desiccant in accordance with MIL-D-3464 must be included at one-third unit per cubic foot of interior volume, and packaging must comply with MIL-STD-2073. The contract mandates use of the Workflow Pro Mod Assist Module, requires adherence to Buy American provisions

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

81--SHIPPING AND STORAGThis contract encompasses the procurement of specialized shipping and storage containers under solicitation SPRPA126RVB95, issued by the Defense Logistics Agency Aviation at Philadelphia, with a closing date extended to August 27, 2026. The containers must be manufactured to exacting specifications outlined in Container Research Corporation drawing number 05259, revision latest, with aluminum shell material and strict adherence to AWS welding standards for aluminum, steel, and stainless steel. Critical requirements include compliance with MIL-STD-130 for Unique Identification (UID) marking in data matrix format, with each unit assigned a serial number following the format “contract#_no_dashes-000X”. Welding processes must be controlled, documented, and inspected with visual and potential non-destructive testing, while sealing crevices and applying electrodeposited zinc-nickel alloy finishes are mandatory. Materials and processes are tightly regulated, including deoxidizing procedures limited to 10 days prior to welding and prohibited use of certain cleaning agents. Quality assurance is rigorous, requiring a First Article Test (FAT) for new manufacturers, with one unit submitted for comprehensive testing within 120 calendar days of contract award. Testing includes dimensional checks, a 18-inch free-fall drop test, pneumatic leak detection (with pressure loss thresholds strictly defined), form and fit verification, and coating inspections. The contractor bears all costs related to FAT submission, shipping, and rework if disapproved, and must provide operating and maintenance instructions. Approved paint systems and coating thicknesses are mandated per federal and military standards, with restrictions on ozone-depleting substances. A waiver to FAT is available only to prior suppliers who can prove identical production under the same facility, processes, and within three years, and must submit dual pricing. All containers require desiccant, sealed joints, and nameplates with UID marks, with the Naval Inventory Control Point Philadelphia acting as the contact for serial number assignment and test scheduling. Packaging must conform to MIL-STD-2073, and the contract includes provisions for security, Buy American compliance, small business set-asides, and equal opportunity, reflecting a comprehensive framework for defense-critical supply chain integrity.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract solicits the manufacture of containers meeting strict technical and quality standards, with the primary item identified by drawing number 05259-657E001, Revision Latest, produced via rotomolding using plastic shell material. Each container must be uniquely identified with a UID marking in data matrix format per MIL-STD-130, with serial numbers following the format contract#_no_dashes-000X, and must include a nameplate with approved alphanumeric serial numbering obtained from NAVICP. A First Article Test is mandatory unless waived under specific conditions for prior approved suppliers who meet stringent criteria including identical production location, processes, and no prior rejections or deviations. The First Article submission requires one unit delivered within 120 days of contract award to a government-designated test site, with comprehensive testing including dimensional verification, 18-inch free-fall drop testing, and pneumatic leak tests under defined pressure parameters, where any pressure loss over 0.05 psi or deformation exceeding three-quarters of an inch results in disapproval. The contractor bears all costs related to First Article testing, including shipping, repairs, and additional submissions if failed, and must certify that production occurs at the same facility as the First Article. Compliance with ASTM B 841 for zinc-nickel plating, AWS D1.2 for welding, and MIL-C-5541 for cleaning is required, along with one-third unit of desiccant per cubic foot of internal volume. The contract mandates 100% production leak testing using Method 5009 of Federal Test Method Standard 101C, with a threshold pressure loss of 0.025 PSIG after temperature and barometric adjustments. All tooling and manufacturing aids are the contractor’s responsibility, and no Government-furnished equipment applies. Packaging must follow MIL-STD-2073. The closing date for submissions has been extended to August 31, 2026. The solicitation includes multiple regulatory clauses such as Buy American, Equal Opportunity, Security Prohibitions, and Mandatory Use of Workflow Pro, and enforces strict liability limitations and compliance with National Defense priority ratings. Offers must clearly state whether they are submitted with or without waiver of First Article requirements, and failure to comply may result in contract default.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThe contract pertains to the procurement of containers manufactured to stringent military specifications, with primary reference to Container Research Corporation drawing number 05259, 530E001-501, latest revision, and associated technical requirements. The container shell is to be made of aluminum, with all manufacturing, testing, and inspection strictly adhering to the referenced drawings, specifications, and contract clauses. Key prohibitions include the use of MIL-W-81381 wire, which must be replaced with SAE-AS22759, and cadmium plating, which is replaced with electrodeposited alkaline Zinc-Nickel Alloy per ASTM B841. Welding must comply with AWS standards for the respective metals, with specific filler materials required for aluminum alloys, and all welds must undergo visual inspection with 5x magnification where necessary, with potential additional non-destructive testing such as dye penetrant as directed by the government. Strict cleaning and deoxidizing procedures must be followed prior to welding, including chemical treatments with approved acids and mechanical cleaning methods that avoid iron-based abrasives to prevent corrosion. Each container must be marked with a Unique Identification (UID) in data matrix format on a nameplate, per MIL-STD-130, and assigned a sequential serial number starting from 0001. A First Article Test (FAT) is mandatory for new manufacturers, requiring submission of one unit for comprehensive testing at a designated government facility in Colts Neck, NJ, within 60 calendar days of contract award. FAT includes dimensional checks, leak testing under 1.00 ± 0.05 psig pressure for 30 minutes, an 18-inch free fall drop test on concrete, form and fit verification with government-supplied components, and final leak retest. The contractor bears all costs related to FAT preparation, shipping, and retesting if disapproved. Approved FAT samples may be counted toward contract quantity if undamaged, but unapproved samples are destroyed. For experienced suppliers, a waiver of FAT may be considered if identical units were produced within the last three years at the same facility without deviations or rejections, provided certification is submitted. All production units must undergo 100% drop testing under the same conditions as FAT. Packaging must comply with MIL-STD-2073, and the contract includes multiple mandatory clauses related to Buy American standards, security exclusions, equal opportunity, warranty limitations, and adherence to the latest

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

81--SHIPPING AND STORAGThis contract, issued by the Defense Logistics Agency Aviation at Philadelphia, solicits the manufacturing of a plastic container shell using vacuum forming, governed by Naval Air Systems Command drawing 3321AS600 Revision LATEST and associated sub-drawings. The item is a multi-application container requiring strict adherence to quality and production standards, including compliance with AWS welding specifications for steel, aluminum, and stainless steel, and adherence to deoxidizing, cleaning, and material control procedures outlined in MIL-C-5541 and ASTM standards. All units must be marked with a Unique Identification (UID) in data matrix format per MIL-STD-130, and each container must include one-third a unit of desiccant per cubic foot of interior volume. Engineering source approval is mandatory for new manufacturers, and only approved shock mounts may be used, with HA KING SHOCK MOUNT (13008) 7900 listed as an authorized alternative. The contract prohibits chromate conversion coatings containing hexavalent chromium due to RoHS compliance, and the waterproof test per ASTM-D-951 has been deleted, replaced by visual inspection of closures and rivets. A First Article Test (FAT) is required for new suppliers, with one unit to be delivered within 120 calendar days for extensive dimensional, functional, and environmental testing including four 18-inch free-fall drops, initial and final leak tests at 1.00 ± 0.05 psig, and form-fit validation. The contractor bears all costs related to FAT shipment, testing, and rework if disapproved, and any additional submissions must meet government-specified deadlines. Approved First Article units may be counted toward contract delivery if undamaged and not destroyed during testing. Production inspections require sampling of at least one unit per lot, subject to drop and waterproof tests witnessed by government representatives, with rework permitted only once per defective unit. The contract mandates compliance with Buy American and small business set-aside provisions, along with security restrictions and mandatory use of Workflow Pro. Performance is set to conclude by August 31, 2026, and all communications, including drawing requests and UID number assignments, must be directed to the buyer at the designated email address. All tooling, fixtures, and test equipment are the contractor’s sole responsibility unless otherwise specified.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVC19, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, pertains to the procurement of shipping and storage containers governed by Container Research Corp drawing number 05259-934E001, with the latest revision. The contract mandates strict compliance with technical specifications including aluminum construction, electrodeposited alkaline Zinc-Nickel Alloy finish per ASTM B841, and welding standards per AWS D1.1, D1.2, D1.3, and D1.6 depending on material, with specific filler metals required for 6061 and 5000 series aluminum alloys. Each container must bear a Unique Identification (UID) in data matrix format on a nameplate, following MIL-STD-130, and be assigned a serial number in the format contract#_no_dashes-000X. A First Article Test (FAT) is required unless waived for qualified prior suppliers, with strict submission deadlines, test procedures including air pressure leak tests, 18-inch drop tests, and form and fit evaluations, all at the contractor’s expense. The contractor must provide test samples unpainted with light preservative, ensure welding and cleaning processes adhere to precise chemical deoxidizing and mechanical cleaning protocols, and seal crevices with MIL-S-81733 sealant. Each unit must contain one-third cubic foot of desiccant per interior volume, and all welding and process controls must be documented and visible at workstations. The Government will conduct FAT testing with an estimated cost of $20,000, and samples will not be returned unless refurbishment is possible and approved. Only the specified shock mount is approved, and substitutions are prohibited without written authorization. The contract includes Buy American, security, small business set-aside, and quality assurance clauses, and the offer deadline is September 9, 2026. Engineering source approval is mandatory for new manufacturers, and all drawing requests must be directed to the designated buyer.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

in about 2 months

81--SHIPPING AND STORAGThis contract, issued under solicitation number SPRPA126RVC07 by the Department of Defense through DLA Aviation at Philadelphia, extends through August 31, 2026, to promote competition for the supply of rotating molded polyethylene containers conforming to Drawing No. 861E001 Revision Latest, as controlled by Container Research Corporation. The item must be manufactured using rotational molding with specific material and finish requirements, including replacement of cadmium plating with electrodeposited alkaline Zinc-Nickel Alloy per ASTM B841. Each container requires a Unique Identification (UID) marking in data matrix format on a nameplate, following MIL-STD-130, with a serial number formatted as contract#_no_dashes-000X. A mandatory First Article Test (FAT) is required for new suppliers, involving dimensional, functional, fit, and leak tests under Federal Test Method Standard 101C, including a 18-inch drop test and pressure retention evaluation, with failure thresholds strictly defined. The contractor is responsible for all FAT sample submission, testing costs, repair, and disposal, with the government estimating $12,000 in testing expenses to be factored into offers. Existing qualified suppliers may request a waiver of the FAT requirement if they can prove identical prior production within the last three years from the same facility without deviations or rejections. Packaging must comply with MIL-STD-2073, and each container must include one-third unit of desiccant per cubic foot of internal volume. All manufacturing must occur in a single facility, and production cannot initiate before FAT approval, with associated costs borne solely by the contractor. The contract enforces Buy American provisions, security exclusions, integrity of unit pricing, and mandatory compliance with WFP Mod Assist and other federal mandates. Communication regarding drawings, UID numbering, FAT arrangements, and nameplate details must be directed exclusively to the designated buyer point of contact via email.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

in about 1 month

81--NRP,SHIPPING AND STThis contract, identified by solicitation number SPRPA126RVC02 and issued by the Department of Defense’s DLA Aviation at Philadelphia, pertains to the procurement of plastic containers manufactured via rotomolding to drawing number 05259-829E001, revision latest, with strict compliance to military and technical specifications. Each container must be equipped with a Unique Identification (UID) marking in data matrix format as mandated by MIL-STD-130, and affixed with a nameplate containing a contract-specific serial number format. The contract requires adherence to stringent quality controls, including a First Article Test (FAT) with mandatory submission of one unit within 120 calendar days for dimensional, functional, and leak integrity testing, though waivers may be considered for prior approved suppliers who meet specific criteria such as identical production history within the past three years and use of the same facility and processes. All containers undergo 100% production leak testing using pneumatic pressure methods per Federal Test Method Standard 101C, with rejection thresholds for pressure loss and shell deformation, as well as an 18-inch drop test to verify structural integrity. The use of electrodeposited alkaline Zinc-Nickel Alloy finish replaces cadmium plating, and each unit must include one third of a cubic foot of non-dusting desiccant per interior volume. The contractor is solely responsible for procuring all tooling, testing equipment, and shipping costs for FAT samples, none of which will be returned unless approved and refurbished; destroyed samples are irrecoverable. The contract includes mandatory compliance with Buy American provisions, security exclusions, small business set-asides, and prohibitions against unauthorized use of restricted technologies. Payment and invoicing follow Wide Area Workflow instructions, with delivery and shipping coordinated through designated Navy contacts. The solicitation closes on August 31, 2026, and includes a clause allowing contract extension to promote competition. Engineering source approval is required for new manufacturers, and all inquiries regarding drawings, UID numbering, or FAT coordination must be directed exclusively to the designated buyer email provided on the contract’s first page.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract, solicitation SPRPA126RVB92, issued by the Defense Logistics Agency Aviation at Philadelphia, seeks suppliers for a specialized shipping and storage container conforming to drawing number 05259, 828E001, latest revision, with an aluminum shell. The item requires strict adherence to military and industry standards including AWS D1.2 for aluminum welding, ASTM B 841 for Zinc-Nickel alloy finish replacing cadmium, and MIL-STD-130 for Unique Identification (UID) marking in data matrix format on a nameplate. The UID serial number must follow the format “contract#_no_dashes-000X” and is to be obtained from the buyer. All containers must include one third of a unit of MIL-D-3464 Type II desiccant per cubic foot of internal volume and sealed at crevices using MIL-S-81733 sealing compound. Welding procedures, material controls, and pre-weld cleaning require rigorous documentation, with deoxidizing limited to ten days prior to welding and mechanical cleaning immediately before welding using approved non-iron abrasives. A First Article Test (FAT) is mandatory unless waived for previous approved suppliers who meet strict criteria, including identical production within the last three years at the same facility without deviations or rejections. The contractor must submit one unit for FAT within 120 calendar days of contract award to a government-specified location, bearing explicit labeling and shipping documentation. The government will perform dimensional, functional, and leak testing, including a free-fall drop test from 18 inches and a 30-minute pressure retention test requiring no more than 0.05 PSIG loss. All FAT costs, including shipping, are borne by the contractor, and samples are typically destroyed during testing. Packaging must follow MIL-STD-2073, and the container must be unpainted with only a light preservative on corrosive areas. The solicitation closes August 24, 2026, and includes mandatory clauses on Buy American, small business set-aside, security prohibitions, workflow compliance, and integrity of unit pricing, with an estimated $10,000 government testing cost factored into bids.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract governs the supply of specialized shipping and storage containers manufactured to precise engineering specifications under drawing number 05259-808E001, with the latest revision required. The containers, constructed from aluminum, must undergo rigorous manufacturing, inspection, and testing protocols, including strict adherence to welding standards such as AWS D1.2 for aluminum, proper deoxidizing and cleaning procedures, and the use of approved filler materials like 4043 and 5356 alloys. Each unit must be equipped with a Unique Identification (UID) marking in data matrix format as mandated by MIL-STD-130, and a nameplate providing serial numbers formatted per the contract’s convention. Compliance with environmental and surface treatment requirements is critical, including glass bead blasting with specified media, replacement of cadmium plating with zinc-nickel alloy finish per ASTM B841, and sealing of crevices using MIL-S-81733. A one-third unit of MIL-D-3464 Type II desiccant must be installed per cubic foot of interior volume. The contract mandates a First Article Test (FAT) for new manufacturers, requiring submission of one unit to designated government test facilities in Lakehurst and Picatinny, NJ, where it undergoes dimensional verification, a 18-inch free-fall drop test, and a rigorous 30-minute pneumatic leak test with pressure thresholds set at 1.0 ± 0.1 PSIG. Failure to pass results in mandatory re-submission at the contractor’s expense, and all costs associated with shipping, testing, and refurbishment of FAT samples are the contractor’s responsibility. The contractor must also maintain full control over materials, tooling, and work processes, with no government-furnished equipment permitted. Production units are subject to a 100% leak test using a lower pressure threshold of 0.50 ± 0.025 PSIG, where a pressure loss exceeding 25% of the stabilized level or more than three-quarters of an inch of deformation during pressurization will result in rejection. The contract enforces Buy American provisions, security prohibitions, and small business set-asides with active compliance dates through February 2026, and includes provisions for waiver of FAT requirements for qualified prior suppliers who meet strict criteria regarding recent production history and identical manufacturing conditions. The solicitation deadline is August 27, 2026, and all deliveries must comply with

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

in about 1 month

81--SHIPPING AND STORAGThis contract pertains to the procurement of specialized containers governed by stringent quality, manufacturing, and testing requirements, with the primary identification drawing number 583E001, Revision Latest, issued by Container Research Corporation. The containers must be fabricated from aluminum shell material, with welding performed in strict compliance with AWS standards depending on the base metal—AWS D1.1 for steel, AWS D1.2 or MIL-W-22248 Class 4 for aluminum, and others for stainless and sheet steel. Filler metals are prescribed specifically for each alloy: 4043 for 6061, and 5356 or 5556 for 5000 series alloys. All welding areas require meticulous preparation, including chemical deoxidization using approved acid solutions within ten days of welding (reduced to three days if exposed outdoors) and immediate mechanical cleaning prior to welding using stainless steel wire brushes only, avoiding iron-based abrasives. Surface finishing requires glass bead blasting with #8 media at 50–70 PSIG to achieve a uniform matte finish, with media strictly segregated from contamination with other metals. Each container must bear a Unique Identification (UID) in data matrix format per MIL-STD-130, with serial numbers formatted as contract#_no_dashes-000X, and must include a nameplate with the assigned alphanumeric serial number obtained from the designated buyer contact. A mandatory first article test (FAT) is required for new manufacturers, involving dimensional, functional, leak, and free-fall drop tests with the container subjected to a 18-inch drop onto concrete, pressurized to 1.00 ± 0.05 psig, and monitored for pressure loss exceeding 0.05 psi over 30 minutes. The contractor bears all costs associated with FAT, including shipment, rework, and additional submissions if rejected, with the government reserving right to adjust contract terms for delays. A waiver may be granted to previously qualified suppliers who can prove identical production under the same processes and facility within the last three years, but such waivers require dual pricing submission and strict certification. All containers must contain one-third cubic foot of desiccant per interior volume and seal crevices with MIL-S-81733. The contract mandates compliance with Buy American provisions, strict material control, welding inspections using 5X magnification and nondestructive testing as directed, and adherence to Navy-specific protocols for transportation,

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

Supply of Loop Clamps (NSN 5340011325675)The contract calls for the manufacture and delivery of 1,066 units of CLAMP, LOOP with NSN 5340011325675, a standardized defense hardware component critical to military operations. A minimum guaranteed order of 159 units is stipulated, ensuring baseline production and supply security. The solicitation is structured as a subcontract under a Women-Owned Small Business Set-aside, designated by NAICS code 332439, which targets manufacturing facilities owned and operated by women. The contract was posted on July 23, 2026, with a response deadline of July 28, 2026, indicating a tight turnaround for proposals. The acquiring agency is the Strategic Acquisition Program Directorate within the Department of Defense, though specific location details for performance or contact are not provided. The procurement is managed through the DIBBS system under the reference number SPE7LX26U8570, and all submissions must align with the set-aside requirements to qualify for award.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

Cybersecurity Compliance and CUI SafeguardingThe contract titled Cybersecurity Compliance and CUI Safeguarding requires the implementation and ongoing maintenance of NIST SP 800-171 controls to protect covered defense information and ensure proper cyber incident reporting. This subcontract is issued under the Department of Defense and targets compliance with federal cybersecurity standards for handling controlled unclassified information. The performance location is specified as Camp Lejeune with a zip code of 28542-0125, indicating the operational focus is tied to military installations. The solicitation is categorized under NAICS code 541512, which corresponds to computer systems design and related services, highlighting the technical nature of the work required. Responses must be submitted by August 3, 2026, and the contract emphasizes continuous adherence to cybersecurity protocols rather than a one-time implementation. The entity performing this work must be capable of sustaining compliance measures, monitoring for threats, and fulfilling mandatory incident reporting obligations in alignment with DoD requirements.

Computer Systems Design Services

POSTED

DEADLINE

Domestic Freight and Traceable ShippingThe contract calls for the domestic transportation of packaged units from the manufacturer directly to Camp Lejeune, North Carolina, using traceable commercial trucking services with comprehensive, real-time shipment tracking throughout the entire transit process. Deliveries must be executed with full accountability, ensuring that every unit is monitored and documented from origin to final destination at the designated military facility. The work is classified under NAICS code 484220, indicating a focus on truck transportation of freight, and is structured as a subcontract under the Department of Defense through the organization Construction & Equipment Containers. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, and the place of performance is clearly identified as Camp Lejeune with the zip code 28542-0125. While no specific point of contact or set-aside details are provided, the requirement emphasizes secure, reliable, and fully traceable logistics to meet military operational standards. Bidders must be prepared to demonstrate proven capabilities in commercial freight execution with integrated tracking systems that meet DOD expectations for accountability and transparency in logistics support.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract seeks subcontractors to provide packaging, labeling, and palletizing services for finished units in full compliance with MIL-STD-129 and DLA RP001 standards to ensure secure and standardized shipment readiness. All work must be executed to meet stringent Department of Defense requirements for military logistics, with strict adherence to labeling protocols, container integrity, and pallet configuration as defined by these military specifications. Services are to be performed at Camp Lejeune, North Carolina, with a response deadline of August 3, 2026, and the opportunity is classified under NAICS code 493190 for other support activities for warehousing and storage. The contracting entity is the Department of Defense under the organization name Construction & Equipment Containers, and the solicitation is structured as a subcontract opportunity through the DIBBS platform, requiring prospective bidders to follow prescribed submission procedures to qualify for award.

Other Warehousing and Storage

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract seeks independent testing and certification of a single prototype unit to confirm adherence to established technical, dimensional, and material specifications before proceeding with full-scale production. This first article testing service is intended to validate that the prototype meets all required standards and performance criteria, ensuring readiness for manufacturing. The work is scoped exclusively to the evaluation of one unit and is not intended for production-level quality control or batch inspections. The contract is identified under NAICS code 541380 and is classified as a subcontract issued by the Department of Defense under the organization name Construction & Equipment Containers. The place of performance is designated as Camp Lejeune, North Carolina, with a zip code of 28542-0125. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. All submissions must be made through the DIBBS platform using the provided RFQ link, and no set-aside provisions are specified for this opportunity.

Testing Laboratories and Services

POSTED

DEADLINE

Freight and Delivery Logistics to Fort Bliss, TXThe contract mandates the transportation and final delivery of a container to a U.S. Army installation at Fort Bliss, Texas, with risk transfer occurring strictly upon successful delivery to the designated location. The work falls under NAICS code 484220, classifying it as a subcontract for truck transportation of freight and commodities, and is issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT CONTAINERS. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, providing vendors a limited window to submit proposals. The place of performance is clearly specified with a zip code of 79918-0000, ensuring precise identification of the delivery destination. Risk remains with the contractor until the container is physically delivered and accepted at Fort Bliss, meaning any damage, loss, or delay prior to that point is the contractor’s responsibility. The contract is accessible via the DIBBS portal for further details and submission procedures.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires comprehensive preservation, packaging, and marking services for containers to ensure full compliance with military standards for transport, storage, and traceability. All work must adhere to strict protocols governing material protection, environmental resilience, labeling accuracy, and documentation integrity to support logistics operations under Defense Department requirements. The services are intended for equipment and supplies destined for deployment, necessitating robust methods to prevent damage, corrosion, and misidentification throughout the supply chain. This is a subcontract opportunity under NAICS code 561910, issued by the Department of Defense through the Construction & Equipment Containers office, with performance specifically targeted at Fort Bliss, Texas, 79918-0000. Bidders must submit responses by August 3, 2026, and are expected to demonstrate proven capability in meeting stringent military packaging directives. The solicitation does not specify a set-aside status, and while the point of contact details are not provided, all proposals must be submitted via the official DIBBS portal at the provided link to be considered valid.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract seeks comprehensive services for the identification, classification, and labeling of hazardous materials in strict adherence to federal regulations, including the Hazard Communication Standard and DFARS clauses. All work must ensure full compliance with safety and reporting requirements for materials handled under Department of Defense operations, with a primary focus on maintaining accurate documentation and clear, standardized labeling throughout the supply chain. Performance is required at Fort Bliss, Texas, with a deadline for submissions set for August 3, 2026. This is a subcontract under NAICS code 541690, indicating it involves other scientific and technical consulting services, likely supporting environmental, safety, or logistics operations. The contracting entity is the Department of Defense through its Construction & Equipment Containers office, and responses must be submitted via the specified DIBBS portal by the stated deadline to be considered.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Shipping and Storage ContainersThe contract seeks the procurement and delivery of military-specification heavy gauge metal shipping and storage containers identified by NSN 8145015653686, ensuring full compliance with established preservation, packaging, and marking standards required for defense logistics. These containers are designed to withstand rigorous operational environments and must meet stringent durability and protection criteria to safeguard sensitive military equipment during transport and long-term storage. The work is classified as a subcontract under NAICS code 332420, which pertains to fabricated metal product manufacturing, indicating the need for specialized industrial capabilities to fulfill the technical and quality requirements. Performance is to be carried out at Fort Bliss, Texas, with a response deadline of August 3, 2026, and the solicitation was posted on July 23, 2026. The contracting authority is the Department of Defense under the office of Construction & Equipment Containers, and while no specific point of contact is listed, all bids must be submitted through the designated DIBBS platform. The contract does not specify a set-aside type, meaning it is open to all eligible contractors, and the emphasis remains on technical compliance, adherence to military standards, and timely delivery to support operational readiness.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

SHIPPING AND STORAGE CThe contract pertains to the procurement of one shipping and storage container with part number 472-MEDCHEST3-4D-182 and NSN 8145015653686, manufactured by Hardigg Industries LLC and colored olive drab. Delivery is required within 20 days from the contract date, with delivery terms set at FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination point, and the container must be packaged in compliance with ASTM D3951, with all labeling and marking conforming to MIL-STD-129, as dictated by DLA’s Master List of Technical and Quality Requirements, which supersede any standard unless otherwise specified. Palletization must adhere to RP001 guidelines, and the item must be shipped via traceable means, prohibiting parcel post. The delivery address is Fort Bliss, TX, under the W90HDC code, with additional identifiers including the transport control number W90HDC61961067, RDD 211, project TP 3, and supplier address W9046W. The unit of issue is one each, priced at a total of $1.00, and the original required delivery date is July 21, 2026. The solicitation number is SPE8ED-26-T-1170, issued under a federal procurement with NAICS code 332510, and the point of contact is Ogden Howard from the Department of Defense. The contract also includes provisions governing covered defense information and compliance with government-specific usage codes and distribution directives.

Hardware Manufacturing

POSTED

DEADLINE

COLLAPSIBLE JMIC 3.0KThe contract is for the procurement of the COLLAPSIBLE JMIC 3.0K, identified by NSN 8145015881830 and part number 7517221-2, with a tan color designation and governed under solicitation SPE8ED-26-T-1171. The item must conform to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications such as ASTM D3951. Packaging and labeling must follow MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and unit pack quantities strictly controlled. The item must comply with MIL-STD-130N for identification marking, exclude all asbestos per FED-STD-313, and prohibit intentional use of mercury or mercury compounds except in permitted applications such as batteries, fluorescent lamps, and instrument controls, with additional containment requirements for portable devices. Sampling for inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with verification levels assigned to critical, major, and minor attributes. First Article Testing is mandatory, and production lot testing is required as specified, with no separate charge for these tests unless explicitly quoted. Delivery is FOB origin, with a 20-day delivery window and no quantity variance allowed. The supplies must be shipped via traceable means only, not parcel post, to the designated military facility at Camp Lejeune, North Carolina. The required delivery date is July 21, 2026, and pricing is fixed at $20.00 per unit for most quantities, with one line item at $21.00, totaling 20 units across multiple CLINs. The contract mandates government oversight at origin for inspection and acceptance and is subject to covered defense information protocols under RD003.

Other Metal Container Manufacturing

POSTED

DEADLINE

Ocean Transportation of Supplies via U.S.-Flag VesselsThe contract seeks ocean freight transportation services using U.S.-flag vessels in full compliance with the Jones Act and Department of Defense regulations, ensuring all movements of supplies meet federal requirements for domestic shipping and military logistics. Vendors must provide end-to-end transportation capabilities with strict adherence to documentation protocols and WAWF reporting systems to maintain accountability and real-time visibility of cargo throughout transit. The performance location is designated as New Cumberland, Pennsylvania, with the contract classified as a subcontract under NAICS code 483110, targeting ocean freight carriers capable of supporting Defense Department supply chain needs. Proposals are due by August 3, 2026, and the solicitation is open for responses via the DIBBS platform, with no set-aside preferences indicated. All services must be conducted using vessels that are U.S.-owned, U.S.-crewed, and U.S.-built to fulfill statutory obligations and ensure secure, lawful transport of military and government cargo.

POSTED

DEADLINE

MIL-STD-129 Marking, Barcoding, and Packaging ComplianceThis contract requires strict adherence to MIL-STD-129 standards for the marking, barcoding, and packaging of containers, ensuring all items are properly labeled with National Stock Numbers, unit identification codes, and configured according to Defense Logistics Agency specifications. The work involves precise compliance with military packaging protocols to support secure and efficient logistics handling within the Department of Defense supply chain. All containers must be prepared to meet DLA’s technical and administrative requirements for inventory tracking and distribution. The solicitation is issued under NAICS code 541690 and is classified as a subcontract with a response deadline of August 3, 2026. Performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002. Although the solicitation number and point of contact are not provided, the posting date is July 22, 2026, and the contract is managed by the Construction & Equipment Containers organization under the Department of Defense. Interested parties must submit their proposals within the specified timeframe to meet compliance obligations and maintain eligibility for award.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE