Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacturing of Data Transfer Units

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the full production of 48 military-grade Data Transfer Units identified by NSN 7RH 5999-01-651-7373 and compliant with specification 0AZ36, covering every phase from initial design through final assembly and rigorous quality control. These units are intended for defense applications and must meet exacting military standards to ensure reliability and performance in operational environments. Work is to be performed at a facility in Torrance, California, with a delivery deadline set for spring 2026. This is a subcontract under the Department of Defense, managed through the PA DLA Aviation office in Philadelphia, and falls under NAICS code 334511 for electronic component and product manufacturing. All deliverables must undergo stringent verification procedures to certify compliance with classified defense requirements and traceability standards.

General Info

Produce 48 military-grade Data Transfer Units per NSN 7RH 5999-01-651-7373, DoD contract.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Torrance, CA, 90501, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA126FDS05.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

59--DATA TRANSFER UNIT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 11

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full production of 48 military-grade Data Transfer Units to NSN 7RH 5999-01-651-7373 and spec 0AZ36, including design, assembly, and quality control.

Similar Contracts

Same NAICS industry code

Solicitation # SPE4A7-26-T-3917

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

COTS Modular RF Enablers Supplier

FA2385 USAF Afmc Afrl Pzl Afrl Rskd

POSTED

DEADLINE

in about 2 months

Supply of UAS Speed Controllers (ESC)

W6QM Micc-Ft Drum

POSTED

DEADLINE

Supply of FPV Flight Controllers (STM32H7)

W6QM Micc-Ft Drum

POSTED

DEADLINE

Lightweight Handheld CUAS Hardware Provider

FA5240 36 Cons Lgc

POSTED

DEADLINE

CEIA Open Gate Weapon Detection System Supply

FA4814 6 Cons Pk

POSTED

DEADLINE

70--PROCESSOR,DISPLAY A, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB29

This contract is for the procurement of 17 units of a flight critical display processor under NSN 7R-7010-015222097-LC, with delivery terms set as FOB Origin. Due to the critical nature of the part and the fact that essential technical data and manufacturing knowledge are held by specific sources, the government requires engineering source approval from the design control activity to ensure quality. The government intends to negotiate with a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe for consideration. Prospective bidders who are not already approved sources must submit detailed information as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures. Failure to provide the required data or proof of a pending approval request will result in the proposal not being considered for award. The government maintains the discretion to proceed with a non-competitive award based on fleet support needs if new source approvals cannot be processed in time to meet operational requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

TELEDYNE FLIR T540 BUNDLE

Solicitation # 140G0326Q0219

The US Geological Survey is conducting market research to identify qualified businesses capable of providing a Teledyne FLIR T540 camera bundle, including the lens and case. This sources sought announcement, identified by solicitation number 140G0326Q0219, is intended for planning purposes to help the government determine its acquisition strategy and is not a formal request for quotes or a commitment to award a contract. The requirement falls under NAICS code 334511 for Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing, with Product Service Code 6650. Interested parties must submit a product data sheet demonstrating their ability to meet the technical specifications via email to the designated point of contact. All responses must be received by September 11, 2026, at 15:00 PST. Submissions via hardcopy or web portals will not be accepted, and the government will not reimburse any costs associated with preparing the response.

Office Of Acquisiton Grants

POSTED

DEADLINE

Thermal Imaging System

Solicitation # SPRDL1-26-R-A035

This pre-solicitation issued by the DLA Land Warren under solicitation number SPRDL1-26-R-A035 is for the procurement of Thermal Imaging Systems, identified by NSN 5855-01-536-9647 and part number 512991310-2. The contract requires a minimum quantity of 26 units with a maximum ceiling of 558 units, with a delivery due date on or about October 31, 2026. Shipping is designated as FOB Destination, and the place of performance is located in New Cumberland, Pennsylvania. This opportunity is a total small business set-aside, meaning only offers from small business concerns will be considered. Interested parties must submit their responses by the deadline of September 24, 2026. Detailed solicitation documents and instructions for obtaining necessary drawings are available through the SAM.gov website.

DLA Land Warren

POSTED

DEADLINE

736 SFS - Handheld Lightweight CUAS

Solicitation # FA524026QM116

Solicitation FA524026QM116 is a combined synopsis and request for quotes issued by the Department of the Air Force 36th Contracting Squadron for a non-kinetic, portable, and lightweight handheld Counter-Unmanned Aerial System (C-UAS). This acquisition is a 100 percent Small Business Set-Aside under NAICS code 334511. The required system must feature rifle-like ergonomics, Android Team Awareness Kit (ATAK) compatibility, and the ability to detect drones up to 7 km across the 400 MHz to 6 GHz spectrum. The device must be capable of disrupting command, control, and GNSS signals to force drones to land or return to origin. The government will award the contract based on best value, evaluating both price reasonableness and the offeror's technical approach to meeting the specified salient characteristics. Proposals must be submitted in two volumes, covering price and technical specifications, by September 21, 2026. Delivery is required within 120 days after receipt of order, with the destination being APO AP 96543-4048. Payment will be processed through the Wide Area WorkFlow (WAWF) system. All offerors must be active in the System for Award Management (SAM) and comply with specific DFARS and FAR clauses, including prohibitions on covered defense telecommunications equipment.

FA5240 36 Cons Lgc

POSTED

DEADLINE

TR-143A TRANSDUCERS

Solicitation # N0016426SNC05

The Naval Surface Warfare Center, Crane, is seeking a two-year ordering period extension and ceiling increase for contract N0016426DGP87 to procure TR-143A Transducers, part number 7146100-302. These specialized components are critical to the SP24 Trident Navigation Subsystem, which supports the launch accuracy of U.S. Ohio and Columbia class submarines as well as UK Vanguard and Dreadnought class submarines. The transducers work with TR-333 Hydrophones to receive signals from the ocean floor and serve as essential replacement assets during standard refit and replenishment operations. This procurement is being conducted as a firm-fixed-price, Indefinite Delivery, Indefinite Quantity contract on a sole source basis with Massa Products Corporation. The government has designated this as a sole source action to avoid substantial duplication of costs, prevent unacceptable delays, and mitigate the extensive certification testing process that can take up to thirty-six months. While the government intends to negotiate with Massa Products Corporation, all responsible sources may submit capability statements for consideration.

POSTED

DEADLINE

Image Intensifier (I2) Tubes ENVG PSQ-20B

Solicitation # SPRBL1-26-X-XXXX

DLA Weapons Support at Aberdeen intends to issue a Request for Proposal around September 28, 2026, for Image Intensifier Tubes (P/N OFM-2307-A2) to support the AN/PSQ-20B Enhanced Night Vision Goggle. The anticipated contract is a five-year, Firm-Fixed Price, Indefinite-Delivery/Indefinite-Quantity agreement with a maximum value of $9,809,553.85. The estimated annual quantity is between 400 and 625 units, with hardware shipping to New Cumberland, Pennsylvania. The project falls under NAICS code 334511 and is subject to strict International Traffic in Arms Regulations (ITAR) and security requirements. Interested offerors must be registered in the Joint Certification Program and provide proof of Facility Security Clearance at the Secret level to access the limited technical data package. This is a non-developmental effort, and any alternate designs require government approval.

DLA Land At Aberdeen

POSTED

DEADLINE

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

81--CONTAINER,SHIPPING

Solicitation # SPRPA126RVC30

This solicitation is for the procurement of aluminum shipping containers, specifically part number 20140, to be manufactured according to Champion Company drawings. The contract is being extended to October 13, 2026, to promote competition. Key technical requirements include the use of specific weld fillers for 6061 and 5000 series aluminum, adherence to AWS welding standards, and the application of an electrodeposited alkaline Zinc-Nickel Alloy finish. Each container must feature a Unique Identification marking on a nameplate and include a specific amount of desiccant based on interior volume. A critical component of this contract is the First Article Testing (FAT) process, which includes dimensional inspections, a form and fit check with a T408-GE-400 engine, and a rigorous 18-inch free-fall drop test followed by pneumatic leak testing. New manufacturers may be subject to pre-award surveys and post-award conferences. While the government estimates first article testing costs at 12,000 dollars, all costs associated with the submission and shipment of FAT samples are the responsibility of the contractor. The contract also specifies strict chemical deoxidizing and mechanical cleaning procedures to be performed immediately prior to welding.

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC10

This solicitation from the DLA Aviation office in Philadelphia is for the manufacture and delivery of aluminum containers according to drawing 875E001. The contract emphasizes strict quality control, requiring adherence to AWS welding standards and specific chemical deoxidizing and cleaning processes to prevent corrosion. Key technical requirements include the use of specific desiccant amounts, the application of Zinc-Nickel Alloy finishing instead of cadmium plating, and the installation of approved shock mounts. Each unit must feature a Unique Identification marking and follow a specific serial number convention. The agreement mandates a rigorous First Article Testing process, including dimensional inspections, a form and fit check, and a series of leak and 18-inch free-fall drop tests. All production units are also subject to a 100% production leak test following a drop test to ensure structural integrity. Contractors must provide their own tooling and manufacturing aids, and new manufacturers may be subject to pre-award surveys and post-award conferences due to the critical nature of the items.

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month

16--PUMP,WINDOW WASHER

Solicitation # SPRPA126QUB47

This solicitation, issued by the Department of Defense via DLA Aviation in Philadelphia, is for the procurement of window washer pumps under solicitation number SPRPA126QUB47. The closing date for responses is September 30, 2026. This requirement is issued under EAF authority and is specifically for non-CLSSA Foreign Military Sales, meaning the assets will be owned by customer countries rather than the U.S. Government. Consequently, standard Item Unique Identification and Valuation requirements are waived. Eligible suppliers must be government-approved sources providing newly manufactured spares; refurbished or repaired materials are strictly prohibited. All parts must be FAA-certified and accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Quality requirements include adherence to AS/EN/JISQ 9100 or an equivalent standard. Authorized distributors must provide a formal distributor letter on the source's letterhead at the time of proposal submission to be considered technically acceptable.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

15--DOOR,ACCESS,AIRCRAF

Solicitation # SPRPA126QUC06

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two aircraft access doors under contract NSN 7R-1560-017005796-P8. The acquisition is conducted as a commercial item procurement under FAR Part 12, requiring that all components be newly manufactured spares; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the items must meet all government form, fit, and function requirements. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, a standard commercial warranty, and full supply chain traceability. IUID is not required for these items as they are captured under the parent end item in the DoD registry.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

16--FIRE CONTROL PANEL

Solicitation # SPRPA126QUC04

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of two aircraft fire control panels under NSN 7R-1680-016679280-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition is governed by FAR Part 12 and applicable DFARS regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, including technical specifications and sales history, and ensure the components meet all form, fit, and function requirements. A standard commercial warranty covering workmanship and replacement parts is required.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

66--TRANSDUCER,MOTIONAL

Solicitation # SPRPA126QUB95

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new motional transducers under contract NSN 7R-6695-015731832-P8. The items are classified as commercial products and must be newly manufactured; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition follows FAR Part 12 and DFARS 212 regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter on the source's letterhead. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must also provide documentation supporting the item's commerciality, a standard commercial warranty, and technical specifications ensuring the components meet the required form, fit, and function.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

16--TAXI,NOSE GEAR,AIR

Solicitation # SPRPA126QUC02

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new nose gear taxi aircraft components under NSN 7R-1680-015885785-P8. The acquisition is conducted as a commercial item procurement in accordance with FAR Part 12 and DFARS 212, requiring that all provided components be newly manufactured spares. Refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. Suppliers must be government-approved sources of supply and provide an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and conformity to design data. Offerors are required to submit documentation supporting the commerciality of the items, such as sales history or price lists, and must provide full traceability from the original manufacturer. Delivery is specified as FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

48--VALVE,CROSS

Solicitation # SPRPA126QUC03

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of nine aircraft cross valves under NSN 7R-4810-016016223-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and all components must meet the government's form, fit, and function requirements. A critical requirement for this contract is the provision of an FAA Form 8130-3 Authorized Release Certificate to ensure airworthiness and traceability from the original manufacturer. Offerors must provide documentation supporting the commerciality of the items and must be government-approved sources of supply or provide an authorized distributor letter. The acquisition is conducted under FAR Part 12 and EAF Authority, requiring a standard commercial warranty and adherence to specific packaging and labeling standards.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC35

This solicitation, issued by DLA Aviation at Philadelphia, seeks the procurement of an aluminum outer shell container and an Inner Frame Adapter Assembly for the T-56 QECA engine. The contract is extended to October 13, 2026, to promote competition and is designated as a total small business set-aside. Manufacturing must adhere to specific Container Research Corporation drawings and AWS welding standards, with a strict requirement for engineering source approval for new manufacturers. Key technical specifications include the use of electrodeposited alkaline Zinc-Nickel Alloy finishing and the installation of specific desiccant and shock mounts. Quality assurance is a critical component of this contract, requiring 100% production leak testing and a rigorous First Article Testing (FAT) process. The FAT includes dimensional inspections, an 18-inch free-fall drop test, and form and fit verification. Contractors must provide a first article sample within 160 calendar days of the contract date to designated facilities in New Jersey. All items must feature Unique Identification (UID) markings and comply with Buy American and Free Trade Agreement certifications.

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month

16--CABIN TEMPERATURE I

Solicitation # SPRPA126QUB92

This solicitation, identified by NSN 7R-1680-016010190-P8 and reference number 162BL902, is for the procurement of one aircraft component determined to be a commercial item. The acquisition is governed by FAR Part 12 and DFARS 212, requiring that the component be currently in production or previously offered in the commercial marketplace. All submitted items must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. To be considered technically acceptable, offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the item's commerciality, such as price lists or sales history, and ensure the component meets all form, fit, and function requirements. Delivery is FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

NRP,FWD FAIRING ASS

Solicitation # SPRPA126QUB93

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of NRP FWD Fairing Assemblies. The contract requires that all parts be newly manufactured, as refurbished, remanufactured, or repaired materials are strictly prohibited. Suppliers must be government-approved sources and provide FAA-certified parts accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Distributors must submit an authorized distributor letter on the source's letterhead to be considered technically acceptable. The agreement mandates compliance with AS/EN/JISQ 9100 quality standards and includes a 12-month warranty for supplies of a noncomplex nature. Payments are to be processed through the Wide Area Workflow system using combined invoice and receiving reports. While IUID is generally required, it is waived for these commercial items per the PMA-290 implementation plan. The solicitation is issued under EAF authority, and responses are due by October 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

81--NRP,SHIPPING AND ST

Solicitation # SPRPA126RVC02

This solicitation is for the manufacture of plastic containers produced via rotomolding, specifically following drawing 829E001. The contract includes strict quality assurance requirements, including a First Article Test (FAT) involving dimensional inspections, 18-inch free fall drop tests, and pneumatic leak testing. All production units must undergo 100% leak testing and be affixed with a Unique Identification (UID) marking on a nameplate. The contractor is responsible for all tooling, fixtures, and the cost of FAT shipment and repair. Key technical specifications require the use of a specific amount of desiccant per cubic foot and the substitution of alkaline Zinc-Nickel Alloy plating for cadmium. The contract is a total small business set-aside and includes various federal clauses regarding the Buy American Act and the Trade Agreements Act. The current amendment extends the solicitation period to September 23, 2026, to promote competition. New manufacturers must obtain engineering source approval from the design activity and may be subject to pre-award surveys and post-award conferences.

Other Metal Container Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS