Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing of Electrical Connector Retaining Plates

Open

Federal

Response Deadline11/19/2026, 10:00:00 AM MST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacturing of 232 precision retaining plates for electrical connectors to support the DLA Weapons Support Active Devices Division. The contractor is responsible for fabricating these plates using precision machining or stamping in strict accordance with NSN 5935014646029 and DLA Master List technical requirements. Performance will take place at Hill AFB. The agreement mandates strict adherence to regulatory and environmental standards, specifically prohibiting the use of mercury and Class I ozone-depleting chemicals. Additionally, the contractor must comply with Buy American requirements and NIST SP 800-171 cybersecurity standards. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

General Info

Manufacture 232 precision retaining plates for DLA at Hill AFB per technical requirements.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

NAICS

332710 - Machine Shops

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-27-T-2676.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLATE, RETAINING, ELECTR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 10:00:00 AM MSTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures precision retaining plates for electrical connectors for prime contractors on DLA Weapons Support Active Devices Division projects. Fabricates plates to NSN 5935014646029 and DLA Master List technical requirements using precision machining or stamping. Ensures no use of Class I ozone-depleting chemicals or mercury. Complies with Buy American and NIST SP 800-171 standards. Delivers 232 finished retaining plates.

Similar Contracts

Same NAICS industry code

Spline Plate SupplyThis subcontract through the Department of Defense and DLA Weapons Support Maritime Supply Chain involves the procurement of 74 specialized spline plate components. The selected provider is responsible for manufacturing or sourcing parts identified by NSN 1240010438210 in strict adherence to provided technical data. All deliverables must be packaged and marked according to MIL-STD-129 standards to ensure compliance with prime contractor and agency requirements. To be eligible for this contract, providers must possess a valid CAGE code and Unique Entity Identifier. The work is categorized under NAICS code 332710, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 19, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Precision Machining and Fabrication of Bow HandlesThis subcontract involves the precision machining and fabrication of 87 finished bow handles for prime contractors supporting the DLA Weapons Support Land Supply Chain. All manufacturing must strictly adhere to Basic Drawing NR 19200 12557008 Revision C and TDP Rev B Gen 2. The project requires the use of precision machining equipment and materials that comply with the Buy American Act and the Berry Amendment. To be eligible, contractors must maintain CMMC Level 2 and US/Canada JCP certifications to ensure secure access to ITAR and EAR regulated data. The work is associated with NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Supply of Hydraulic Link and PinThis subcontract involves the supply of 35 hydraulic link and pin units for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The provider is responsible for manufacturing or sourcing components that strictly adhere to the technical specifications for NSN 1650004560436, ensuring full compliance with the DLA Master Solicitation and all associated technical and quality requirements. Performance for this contract takes place at Hill AFB. The logistics process requires items to be packaged specifically for Government-Arranged Transportation under the First Destination Transportation program. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Stainless Steel Valve Lever FabricationThis subcontract involves the manufacture and supply of three stainless steel valve lever units for the Department of Defense, specifically supporting the DLA Weapons Support Active Devices Division. The contractor is responsible for fabricating the levers using precision machining to meet NSN 4820-01-191-3658 technical specifications. Additional requirements include strict adherence to MIL-STD-129 for marking and RP001 DLA standards for packaging. The work is categorized under NAICS code 332710 and is to be performed in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 1 hour ago

DEADLINE

Fabrication and Supply of Access Covers (NSN 5340-01-559-9054)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Supply of TRI-TEC Manufacturing ComponentsThis subcontract involves the supply of precision-manufactured components for prime contractors supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The scope of work requires the manufacture or sourcing of part numbers 810300PL and 810336 in strict accordance with provided technical specifications. All deliverables must adhere to specific military standards, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. The agreement specifies the delivery of two units of material on an FOB Origin basis, with the place of performance located in Tracy, California. The contract falls under NAICS code 332710 and was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Rigid Connecting Links (PN: A05-27895-000)This subcontract involves the manufacture of four finished and inspected rigid connecting links, part number A05-27895-000, for prime contractors supporting DLA Weapons Support Land projects. The fabrication process requires CNC milling and turning to ensure all components meet the technical and quality specifications outlined in the DLA Master List RA001. The contractor must adhere to strict regulatory standards, including the Buy American Act and the Berry Amendment for material sourcing, as well as NIST SP 800-171 cybersecurity standards. Performance will take place in New Cumberland, Pennsylvania, under the oversight of the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

Gauge and Bracket Assembly Fabrication and SupplyThis subcontract involves the manufacture and supply of five Gauge and Bracket Assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the fabrication of components and subassemblies using precision machining and assembly equipment to ensure strict adherence to defined tolerances and specific Technical Data Packages, including drawings 53711 7286970, 10001 1404077, and 53711 7286967. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710. Interested parties must respond by November 16, 2026, to fulfill the requirements of the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Precision Component Manufacturing (Lever, Wheel Adjusti)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Supply of Outlet, Boss Assembly (NSN 4730-01-087-1345)This subcontract involves the supply of one precision-machined Outlet, Boss assembly, identified as NSN 4730-01-087-1345, for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing the assembly using traditional methods, as additive manufacturing is strictly prohibited. All work must adhere to the DLA Master List of Technical and Quality Requirements, with specific compliance required regarding environmental restrictions on mercury and ozone-depleting chemicals. The final product must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. This project falls under NAICS code 332710 and is to be performed in Silverdale, Washington. Interested parties must respond by November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

Precision Fabrication of Support Rods (NSN 2540-01-455-1353)This subcontract involves the precision machining and fabrication of nine Support Rods for Lids under the DLA Weapons Support Maritime Supply Chain. All work must be performed in strict accordance with Drawing NR 19200 12940982 and TDP Rev A Gen 1. The project mandates the use of CNC machining and materials sourced exclusively from QPL/QML providers, while explicitly prohibiting the use of additive manufacturing. To be eligible, contractors must maintain JCP certification, CMMC Level 2, and ISO 9001/SAE AS9003 certifications. The performance of the contract is centered in Anniston, and the response deadline for the solicitation is November 19, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Clamp, Hub (NSN 3040-01-106-7301)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Same awarding agency

Digital Microcircuit Supply and Specialized Packaging

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supplier of Variable, Non-Wire Wound, Non-Precision Resistors

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 1 hour ago

DEADLINE

Electrical Connector Backshell SupplierThis subcontract involves the procurement of a high-precision electrical connector backshell, specifically part number KDM001-15CA2WH with NSN 5935-01-687-1581. The supplier is required to provide one unit of the component to prime contractors supporting DLA supply contracts, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The contract is managed under the Department of Defense through the DLA Weapons Support Active Devices Division, with the place of performance located at Fort Bliss. The delivery timeline is expedited, requiring the unit to be delivered within 10 days of the contract award.

Electronic Connector Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support Active Devices Division projects. The scope of work involves performing military-grade packaging and marking for electronic components, specifically adhering to MIL-STD-2073-1E for packaging and MIL-STD-129 for shipping labels. To ensure readiness for the First Destination Transportation program, the provider must utilize specialized materials including anti-static bags, moisture barrier bags, and military-grade crates. The services are performed in New Cumberland, Pennsylvania, with all shipments delivered and marked for FOB Origin pickup. This opportunity falls under NAICS code 488510 and is managed through the Department of Defense. Interested parties should note the response deadline of November 19, 2026.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Plug Assembly, Tip (NSN 5935-01-504-3817)This subcontract involves the manufacture and supply of 153 Plug Assembly, Tip units for the DLA Weapons Support Active Devices Division under the Department of Defense. The contractor is responsible for fabricating these assemblies to the specific dimensions and tolerances of NSN 5935-01-504-3817, adhering to the technical and quality requirements outlined in the DLA Master List RA001. Production requires the use of precision machining and specialized electrical contact materials. The project mandates strict compliance with the Buy American Act as well as MIL-STD-2073-1E and MIL-STD-129 standards. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, falling under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

DOD-Qualified ESD/EMI Packaging SupplyThis subcontract involves the supply of specialized ESD and EMI protective packaging materials for prime contractors working on projects for the DLA Weapons Support Active Devices Division. The scope of work requires the provision of Type I and Type III barrier materials that adhere strictly to MIL-PRF-81705 and MIL-DTL-117 standards. Additionally, the contractor must ensure all cushioning and marking comply with MIL-STD-2073-1E and MIL-STD-129 while delivering certified packaging kits. The project is managed under the Department of Defense with performance taking place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 19, 2026, for this requirement categorized under NAICS code 322219.

Other Paperboard Container Manufacturing

POSTED

about 1 hour ago

DEADLINE

Radio Frequency Amplifier FabricationThis subcontract involves the fabrication of two fully functional Radio Frequency Amplifiers for the Department of Defense, specifically supporting the DLA Weapons Support Active Devices Division. The manufacturer must produce the units in strict accordance with Reference Drawing NR 18876 Revision G and part numbers 11476018 or SXA3930, corresponding to NSN 5996-01-464-6295. Performance of the contract will take place in New Cumberland. To be eligible, the contractor must meet rigorous security standards, including a CMMC Level 2 self-assessment and full compliance with NIST SP 800-171 cybersecurity requirements. The opportunity was posted on November 8, 2026, with a response deadline of November 19, 2026, falling under NAICS code 334220.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Electromagnetic Relays (NSN 5945014587422)This subcontract involves the manufacture or sourcing of 286 electromagnetic relays, identified by NSN 5945014587422, to support prime contractors under the Defense Logistics Agency Weapons Support Active Devices Division. The contractor is responsible for ensuring all individual unit packs are marked for Lead and Pb-Free attributes in accordance with IPC/JEDEC J-STD-609 standards. All deliverables must adhere to the DLA Technical and Quality Master List of Requirements, with packaging strictly following MIL-STD-2073-1E and MIL-STD-129 guidelines. The performance of this contract is centered at Robins Air Force Base, and the final delivery consists of 286 properly marked and packaged relays.

Semiconductor and Related Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging and HCI Marking Services

Motor Vehicle Towing

POSTED

about 1 hour ago

DEADLINE

Specialized Material Supply for RF Filters

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 1 hour ago

DEADLINE

Precision Band Pass Filter Fabrication (NSN 5915008554286)

Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Precision Machining of Mounting Brackets (CSI)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Precision Machining of Flight Critical Shims

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Metallic Tube Fabrication and Supply

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

Push-Pull Control Assembly Manufacturing

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 1 hour ago

DEADLINE

Precision Manufacturing of Shaft Collars

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Supply of Shims (NSN 5365010452188)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Fabrication of Mounting Brackets (NSN 5340-01-420-7614)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Precision Machining of Stud Shafts

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

Aircraft Structural Component Fabrication

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Wire Rope Assembly Manufacturing and Supply

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

Supply of TEE, TUBE TO BOSS

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacture and Supply of Access Covers (NSN 5340014090972)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS