Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Manufacturing of Nonmetallic Special Shaped Section Seals

Active

Federal

Response Deadline10/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacturing and supply of specialized nonmetallic special shaped section seals for prime contractors supporting the Defense Logistics Agency. The seals must be produced according to NSN 5330-01-550-6458 and CNH Industrial P/N 84499076 specifications using polymer molding or extrusion equipment. All materials are required to be asbestos-free and UV-resistant, adhering to FED-STD-313 and DLA RA001 quality standards. The project is managed by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with the place of performance located at Fort Leonard Wood. The solicitation was posted on September 23, 2026, with a response deadline of October 5, 2026. This procurement falls under NAICS code 326199.

General Info

Subcontract for manufacturing asbestos-free nonmetallic seals for DLA at Fort Leonard Wood.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

FORT LEONARD WOOD, MO, 65473-8947, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-26-T-274U.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, NONMETALLIC SPECI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineOct 5

Submission deadline

Response Deadline

10/05/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized nonmetallic seals for prime contractors on Defense Logistics Agency (DLA) procurement projects. Manufactures seals to NSN 5330-01-550-6458 and CNH Industrial P/N 84499076 specifications using polymer molding or extrusion equipment. Ensures materials are UV-resistant and asbestos-free per FED-STD-313 and DLA RA001 quality requirements. Delivers the completed nonmetallic special shaped section seal.

Similar Contracts

Same NAICS industry code

PLASTIC MATERIAL, CELLU

Solicitation # SPE7M2-26-T-7026

NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-441X

The Department of Defense, through DLA Land And Maritime, is seeking quotes for the procurement of two boat bladders under NSN 2090015079672. This requirement is identified by solicitation number SPE7M426T441X and is designated as a set-aside for Service-Disabled Veteran-Owned Small Businesses. The approved source for this item is 1GTC0 WG9000005, and delivery is required to DLA Distribution within 168 days after the order is received. Interested and responsible sources must submit their quotes electronically by the deadline of October 5, 2026. The procurement falls under NAICS code 326199. All solicitation details are available online via the provided link, as hard copies and specific technical drawings are not available. Questions regarding this request should be directed to the buyer via the DIBBS portal.

FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Geotextile Material SupplyThis subcontract opportunity with the Department of Defense, specifically the W072 Endist Pittsburgh, involves the supply of Class 4, Type A non-woven geotextile fabric for prime contractors working on US Army Corps of Engineers projects. The contractor is required to provide 47 square yards of material that adheres to PennDOT and PDT 408 specifications, with delivery of the geotextile rolls directly to the project site located in zip code 15223. The procurement is designated as a total Small Business Set Aside under NAICS code 326199. Interested parties must submit their responses by October 26, 2026, at 4:00 PM.

W072 Endist Pittsburgh

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Specialized Materials (FRP & Geosynthetics)This subcontract opportunity involves the supply and installation of Fiber Reinforced Polymer (FRP) and geosynthetics for prime contractors working on Mountain Regional Water Special Service District projects. The scope of work specifically includes the delivery and installation of FRP components along with geosynthetic liners and fabrics. The project is managed by the state of Utah under NAICS code 326199. Interested parties must submit their responses by the deadline of October 15, 2026.

POSTED

about 24 hours ago

DEADLINE

Poly Box Truck - 16 Bushel

Solicitation # B2728107

Solicitation B2728107 is a request from the City of Philadelphia's Prisons department for the procurement of 16-bushel blue mobile, nestable poly box trucks with casters. The required bins must be manufactured using FDA-compliant resins and meet specific dimensional requirements, including an overall size of 44 1/8 inches in length, 32 1/4 inches in width, and 35 1/4 inches in height. While ULINE Model 1955BLU is cited as a reference product, equivalent products that meet all minimum technical specifications are acceptable. The contract is classified as a micro purchase with a price ceiling of 45,000 dollars and a maximum term of 365 days. Awards will be granted to the lowest responsible and responsive seller. Bidders must submit quotes electronically via the PHLContracts platform by October 6, 2026. A critical requirement for responsiveness is the submission of a signed Consent and Authorization Agreement. Additionally, vendors may voluntarily provide LGBTQ applicant opportunity data to support the city's diversity and inclusion efforts. The successful contractor must maintain required insurance and comply with all applicable federal, state, and local laws, including non-discrimination and ADA regulations.

POSTED

DEADLINE

Commercial-Grade Driving Range Mat Manufacturer/SupplierThis subcontract agreement involves the manufacture and supply of commercial-grade driving range mats for prime contractors working on City of Burnaby procurement projects. The supplier is responsible for providing synthetic turf mats designed with a rotatable and reversible feature that allows for four or more usable orientations to minimize wear. The scope of work includes delivering enough mats to accommodate approximately 114 stalls, providing descriptive literature for equivalent products, and guaranteeing a warranty of good and marketable title. The contract is categorized under NAICS code 326199 and was posted on September 23, 2026, with a response deadline of October 14, 2026. All deliverables are intended for use within the City of Burnaby.

City of Burnaby

POSTED

DEADLINE

Geotextile Fabric SupplyThis subcontract for Geotextile Fabric Supply, issued by MPE a division of Englobe, involves the provision of high-performance woven and non-woven geotextile materials for municipal projects in the Summer Village of Island Lake. The supplier must provide polypropylene or polyester polymer fabrics that are resistant to UV exposure and deliver certified rolls directly to the project site. A critical requirement of this agreement is the submission of a manufacturer's affidavit certifying that all material requirements are met prior to delivery. Interested parties must respond by the deadline of October 8, 2026, for this opportunity which falls under NAICS code 326199.

MPE a division of Englobe

POSTED

DEADLINE

Supply of Red Rubber Retaining Bands for Fire HoseThis subcontract through the DLA DIST SAN JOAQUIN for the Department of Defense involves the supply of red rubber retaining bands for fire hoses. The contractor is responsible for manufacturing or sourcing bands made from natural or synthetic rubber that meet NSN 4210-01-529-8489 and Part Number NFES 0727 specifications. The total order consists of 300 boxes, with each box containing 325 bands, to be delivered to Tracy, California. The contract requires strict adherence to packaging and marking standards including MIL-STD-2073-1E, MIL-STD-129, and RP001, as well as compliance with the Buy American Act under DFARS 252.225-7000. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 326199.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Manufacturing of Special Shaped Non-Metallic Seal (NSN 5330-01-549-6308)This subcontract involves the manufacture of a single custom-shaped non-metallic seal, identified by NSN 5330-01-549-6308, for prime contractors supporting the Department of Defense Land Supplier Operations Vehicle Support. The fabrication process requires the use of precision molding or extrusion equipment to ensure the seal meets specific technical requirements. The contractor must maintain strict compliance with the DLA Master List of Technical and Quality Requirements and adhere to DFARS 252.225-7001 Buy American standards. Performance for this contract is centered at Fort Leonard Wood, with a response deadline of October 5, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Ophthalmic Dropperette Packaging SupplyThis subcontract for Ophthalmic Dropperette Packaging Supply supports prime contractors delivering medical supply contracts for the Department of Defense via the Medical Supply Chain Pharm FSA. The provider is responsible for producing sterile dropperettes and secondary pouch packaging using medical-grade plastics and specialized sealing equipment. Each delivery must be configured as 12 pouches containing two 0.1ML units. To ensure compliance with medical standards, the provider must maintain ISO 13485 certification and adhere to strict sterile packaging requirements. The performance of this contract is based in San Antonio, Texas, under NAICS code 326199. The solicitation was posted on September 23, 2026, with a response deadline of September 29, 2026.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Avionic Service Case ManufacturerThis subcontract with the Department of Defense involves the manufacture and supply of 100,000 avionic service cases for prime contractors under DLA supply contracts. The contractor is responsible for the fabrication and assembly of cases according to NSN 1680-01-624-0285, ensuring strict adherence to RQ001 quality requirements and DAAN-09-06 Critical Safety Item standards. Key technical requirements include bare item marking per RQ017, the use of precision marking equipment, and full supply chain traceability under C03. The opportunity was posted on September 23, 2026, with a response deadline of October 8, 2026, under NAICS code 326199.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Special Purpose Electrical Insulation Sleeving (NSN 5970-00-146-1122)This subcontract involves the sourcing and manufacture of special purpose electrical insulation sleeving, identified by NSN 5970-00-146-1122, to support prime contractors fulfilling DLA supply contracts. The selected provider is responsible for delivering one unit of the insulation sleeving, ensuring all non-hazardous materials are packaged in strict accordance with ASTM D3951 and RP001 DLA Packaging Requirements for Procurement. The contract is managed by the Department of Defense under the CCAD Detachment, with performance taking place in Corpus Christi, Texas. Classified under NAICS code 326199, the opportunity was posted on September 23, 2026, with a response deadline of October 1, 2026.

CCAD DETACHMENT

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

ADAPTER, AMMUNITION CHU

Solicitation # SPE7L3-26-T-281R

This contract is for the procurement of 27 ammunition chute adapters, identified by NSN 1005015588070 and part number S508001-151. The order is managed by the Department of Defense under solicitation SPE7L3-26-T-281R, with a required delivery date of January 10, 2027, and a delivery window of 168 days. Shipping is set as FOB Origin, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania. The items are classified as defense articles subject to International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. Compliance requirements include CMMC Level 2 self-assessment, specific DLA packaging standards according to ASTM D3951 and MIL-STD-129, and adherence to the DLA Master List of Technical and Quality Requirements. Additionally, the contract specifies that surplus items are not acceptable and mandates the removal of government identification from any non-accepted supplies.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-276D

This solicitation is for the procurement of 60 aluminum gaskets under NSN 5330-00-196-6684 for the Department of Defense, specifically the Land Supplier Opns Vehicle Spt. The contract requires the items to be manufactured according to current military or consensus non-government part standards, with a strict prohibition on the use of asbestos as defined in FED-STD-313. Delivery is required within 168 days after receipt of order, and the item is classified as a commercial product. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, with specific verification levels assigned to critical, major, and minor attributes. The contract incorporates DLA packaging requirements and identification marking standards per MIL-STD-130N. This is a fully competitive procurement with a response deadline of October 5, 2026, and performance is centered in New Cumberland, Pennsylvania.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

SEAL RING, METAL

Solicitation # SPE7L3-26-T-283J

This solicitation is for the procurement of 33 metal seal rings under solicitation number SPE7L3-26-T-283J for the Department of Defense. A critical requirement of this contract is the First Article Testing of three units, with the test report due within 30 calendar days of the contract date. The Defense Contract Management Agency Administrative Contracting Officer is delegated the authority to approve or disapprove these tests. Contractors must provide written notice at least 14 calendar days before shipping units for the First Article Test to allow for government inspection. Offerors must comply with domestic material restrictions, including the Berry Amendment and Buy American Act, and represent that no covered telecommunications equipment will be provided. The solicitation encourages the submission of quantity ranges due to volatile demand and requires registration via the Account Management and Provisioning System for Vendor Shipment Module access. Additionally, additive manufacturing is prohibited unless specifically authorized. Delivery is expected 195 days after receipt of the order.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-275R

This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of six gaskets under part number 19370 and national stock number 5330-01-304-3483. The contract specifies that the items must be free of asbestos as defined by FED-STD-313 and requires the removal of government identification from any non-accepted supplies. The delivery timeline is set for 168 days after the order is received. The procurement is governed by DLA packaging and technical requirements, with specific quality standards outlined in the DLA Master List. The place of performance is located in Tracy, California, and the solicitation is categorized under NAICS code 336411. Interested parties must respond by October 5, 2026, with the primary point of contact being Susan Diamond.

Aircraft Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-283L

This solicitation from the Department of Defense, specifically the Land Supplier Opns Vehicle Spt, is for the procurement of 395 gaskets under National Stock Number 5330-01-534-4282. The items are classified as commercial products and must be completely free of asbestos. Delivery is required within 168 days after the order is placed, with the place of performance located in New Cumberland, Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including specific packaging standards. Items must be sealed in medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. Additionally, the supplier must comply with MIL-STD-130N for identification marking of military property and follow all DLA packaging and government identification removal protocols.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-276W

This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 90 gaskets under part number 5330-00-783-1646. The contract is identified as a commercial item acquisition with a delivery requirement of 174 days after the order is placed. Performance is designated for Tinker AFB, and the response deadline for the solicitation is October 5, 2026. The contract mandates strict adherence to DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies. Quality assurance must follow MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, with specific AQLs assigned to critical, major, and minor attributes. Additionally, the item must contain no asbestos as defined by FED-STD-313.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

ACTUATOR, MECHANICAL, NO

Solicitation # SPE7L3-26-T-280C

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of one mechanical actuator, identified by NSN 3040014680838. This requirement is listed under solicitation number SPE7L326T280C with a NAICS code of 336320. The approved source for this item is 98523 15662091-1, and the item is to be delivered to DLA Distribution W1A8 within 168 days after order. This is a combined solicitation issued as a Request for Quote, with a response deadline of October 5, 2026. All quotes must be submitted electronically via the provided system, as hard copies of the solicitation and associated technical drawings or specifications are not available. Interested and responsible sources are encouraged to submit their quotes by the specified deadline to be considered for the award.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-278J

This solicitation, issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, is for the procurement of 91 gaskets identified by NSN 5330-01-200-6880. The contract requires delivery within 55 days after order and specifies that the place of performance is in Tracy, California. The solicitation number is SPE7L3-26-T-278J, with a response deadline of October 5, 2026. The procurement is subject to strict technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Specifically, the items must be free of asbestos as defined in FED-STD-313 and must not contain intentionally added mercury or mercury-containing compounds, with limited exceptions for specific functional components. All technical and quality requirements are governed by the DLA Master List effective on the solicitation or award date.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

FELT, MECHANICAL, PREFOR

Solicitation # SPE7L3-26-T-278T

This contract is a solicitation for the procurement of 5,955 feet of preformed mechanical felt under NSN 5330-01-230-0318. Issued by the Department of Defense Land Supplier Operations Vehicle Support, the requirement specifies a delivery timeline of 168 days after the order is placed. The procurement is governed by DLA packaging requirements and technical quality standards found in the DLA Master List, with specific mandates prohibiting the use of asbestos and Class I ozone-depleting chemicals. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans. The contract defines specific verification levels and AQLs for critical, major, and minor attributes to ensure product compliance. Any substitute chemicals or alternative materials must be submitted for official approval. The primary point of contact for this solicitation is Susan Diamond, and the performance location is listed in New Cumberland, Pennsylvania.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

CAM KIT, UNLOCKING

Solicitation # SPE7L3-26-T-277G

This contract is a solicitation from the Department of Defense, specifically the Land Supplier Opns Vehicle Spt, for the procurement of 43 unlocking cam kits under part number 1005-01-005-4494. The delivery requirement is set for 687 days after the order is placed, with the place of performance located at Hill AFB. The agreement includes stringent regulatory and quality requirements, including CMMC Level 2 cybersecurity assessments and specific DLA packaging and quality standards. Due to the nature of the items as small arms weapons parts, the contract mandates strict demilitarization protocols and export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-281P

This contract is a solicitation for the procurement of two body hubs, identified by NSN 3040-01-546-1408 and associated with Curtiss-Wright Flow Control Corporation part numbers 12221-999-000 and 12270PL. The agreement specifies a delivery timeframe of 168 days after receipt of order, with a required delivery date of June 15, 2027, and a need ship date of March 23, 2027. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the procurement is managed under solicitation number SPE7L3-26-T-281P by the Department of Defense Land Supplier Operations Vehicle Support.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L3-26-T-278U

This contract is for the procurement of 18 gaskets under solicitation SPE7L3-26-T-278U for the Department of Defense. The items are identified by NSN 5330-01-242-6864 and are designated as critical application items. Approved sources include Siemens Energy, Inc. and Curtiss-Wright Electro-Mechanical Corp. The delivery timeline is set for 168 days after order, with a required delivery date of March 14, 2027, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Strict material and quality standards apply, specifically prohibiting the use of asbestos and the intentional addition of mercury, except in specified functional components. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with a specific requirement to use medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Inspection and acceptance will take place at the destination.

Aircraft Manufacturing

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS