Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manufacturing of Piercing Applicators

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the production of nine units of piercing applicators designated by NSN 4210-00-789-5151, manufactured to meet strict military specifications and aligned with all applicable defense and safety standards. The work must be carried out in accordance with federal procurement requirements and quality assurances expected for defense-related components, ensuring functional reliability and compliance with operational needs. The performance location is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the physical site where delivery and potential inspection will occur. This is a subcontract opportunity issued under the Department of Defense through the DDSP New Cumberland Facility, with a North American Industry Classification System code of 339999, covering other miscellaneous manufacturing. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, providing a limited window for qualified subcontractors to submit proposals. While no set-aside provisions or specific point of contact are listed, interested parties must refer to the official DIBBS portal linked in the contract data for submission guidelines and detailed technical requirements.

General Info

Produce nine military-spec piercing applicators for delivery in New Cumberland, Pennsylvania, by August 3, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

339999 - All Other Miscellaneous ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Production of 9 units of piercing applicators (NSN 4210-00-789-5151) to military specifications, including compliance with defense and safety standards.

Similar Contracts

Same NAICS industry code

MWD Obedience Course Equipment Manufacturing & AssemblyThe contract calls for the manufacture and assembly of a durable, field-deployable military working dog obedience course set designated by NSN 3770016135936, fully compliant with U.S. military standards. The equipment must be engineered for robust performance under austere field conditions, ensuring reliability and longevity during training operations. All components must meet specified functional, structural, and safety requirements to support the rigorous demands of military working dog units. This is a small business set-aside contract under the SBA program, restricted exclusively to qualified small businesses as defined by FAR 19.5, with the NAICS code 339999 indicating miscellaneous manufacturing. The place of performance is established in Tracy, California, with a zip code of 95304-5000, and responses are due by August 3, 2026. The contract falls under the umbrella of the Department of Defense’s Construction and Equipment Manufacturing and Construction office, and interested parties must submit proposals via the DIBBS platform using the referenced solicitation number SPE8EE26T2148.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 22 hours ago

DEADLINE

MIL-STD-2073-1E Compliant Packaging and PreservationThe contract requires comprehensive clean and dry processing, plastic film wrapping, and full compliance with MIL-STD-2073-1E standards for the packaging and preservation of defense electronic components. These components must be prepared for extended storage in dry environments, ensuring protection against moisture, corrosion, and physical degradation. The work must adhere strictly to military packaging guidelines to maintain operational readiness and long-term functionality of sensitive electronics under demanding storage conditions. All activities must be performed with precision to meet defense-grade requirements without deviation. This is a subcontract opportunity under the NAICS code 339999, posted by the Active Devices Division of the Department of Defense, with performance located at a FPO address with ZIP code 96657. The response deadline is August 3, 2026, and interested parties must submit proposals by that date to be considered. Participation is open without specific set-aside designations, and the opportunity is accessible through the DIBBS platform for full solicitation details.

ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

Packaging & Preservation Services (MIL-STD Compliant)The contract requires the design and execution of packaging solutions that adhere strictly to MIL-STD-2073-1E standards to ensure the preservation of equipment during transport and storage. This includes the careful selection of materials that provide adequate protection against environmental factors, with emphasis on moisture resistance, vibration dampening, and structural integrity. The packaging must also be compatible with established marking systems to ensure clear identification and traceability throughout the supply chain, maintaining compliance with military logistics protocols. All work must be executed with precision to meet the stringent requirements for defense-grade preservation. This is a subcontract opportunity issued by the Electrical Devices Division under the Department of Defense, with a solicitation deadline of August 3, 2026. The NAICS code 339999 indicates it falls under miscellaneous manufacturing, suggesting a broad scope that may involve specialized production or assembly of packaging components. The place of performance and point of contact details are unspecified, but the work is expected to support federal defense logistics operations. Interested parties must respond by the stated deadline through the provided DIBBS portal link to be considered for award.

ELECTRICAL DEVICES DIV

POSTED

about 22 hours ago

DEADLINE

MIL-STD-130N Marking and Item IdentificationThe contract requires permanent marking of rotary files and their packaging with part numbers, serial numbers, and unique item identifiers using compliant methods such as laser etching or dot peening, in accordance with MIL-STD-130N standards for item identification. All marking must meet stringent military specifications to ensure traceability, durability, and readability throughout the item’s lifecycle, with specific attention to placement, font size, and contrast against the material surface. The work is to be performed at the DDSP NEW CUMBERLAND FACILITY in New Cumberland, Pennsylvania, with the zip code 17070-5002 designated as the place of performance. This subcontract, solicited under NAICS code 339999 for other miscellaneous manufacturing, was posted on July 22, 2026, with a response deadline of August 3, 2026. The contracting entity is the Department of Defense through its agency designation DDSP NEW CUMBERLAND FACILITY, and the requirement is issued via the DIBBS platform with the solicitation number SPE8E526T3646. No set-aside type is specified, indicating the opportunity is open to all eligible contractors. Compliance with MIL-STD-130N is mandatory, and failure to meet marking, data format, or durability requirements may result in rejection of deliverables.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

Permanent Identification Marking (MIL-STD-130N Compliance)The contract requires the permanent identification marking of binder units through laser etching or metal stamping to comply with MIL-STD-130N standards for unique identifier (UID) traceability. Each unit must be marked with machine-readable and human-readable data to ensure accurate tracking throughout its lifecycle, meeting Department of Defense specifications for asset management and inventory control. The work must be performed to exacting quality and durability standards, ensuring the markings remain legible under harsh operational conditions. This subcontract is issued under NAICS code 339999 for other miscellaneous manufacturing and is tied to a performance location in Jacksonville, Florida, with a zip code of 32212-0103. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026. The contracting entity is affiliated with the Department of Defense through its Construction & Equipment Manufacturing and Construction organization. All work must be completed in accordance with the technical and regulatory requirements of MIL-STD-130N to ensure full compliance and acceptance by the government.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 22 hours ago

DEADLINE

Extension Pole and Wash Pad Hardware SupplyThe contract calls for the supply of specific cleaning and maintenance hardware including 61-inch extension poles, 3M wash pads, twist-lok holders, and melamine jet pads, all of which must meet original equipment manufacturer specifications to ensure compatibility and performance. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the Small Business Administration are eligible to bid, reinforcing the government’s focus on supporting small business participation in defense procurement. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the place of performance is designated as Tracy, California, with a zip code of 95304-5000. The contract is managed by the DLA Dist San Joaquin office under the Department of Defense and falls under the NAICS code 339999, which covers other miscellaneous manufacturing. The procurement is conducted through the DIBBS platform, requiring interested vendors to submit offers via the official online portal by the stated deadline.

DLA DIST SAN JOAQUIN

POSTED

about 22 hours ago

DEADLINE

Non-NSN Defense Item Supply and Delivery (CAGE: 79396, PN: 33654)A single unit of a non-NSN defense item with part number 33654 is being sourced under a subcontract for procurement, packaging, labeling, and FOB destination delivery to Fort Carson, CO, with a zip code of 80913-4093. The supplier must adhere to strict military and industry standards including MIL-STD-129 for packaging and labeling, ASTM D3951 for packaging requirements, and DLA RP001 for logistics and supply chain compliance. The acquisition is managed by the LAND SUPPLY CHAIN under the Department of Defense, with the NAICS code 339999 indicating it falls under all other miscellaneous manufacturing. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with the contract assigned to a vendor with CAGE code 79396. Delivery must be completed to the specified FOB destination, ensuring the item arrives ready for immediate use without further handling or repackaging at the receiving location.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

NON-NSN ITEMA single unit of item WF10369 with CAGE code 79396 is being procured under solicitation SPE7L1-26-T-863D for delivery to Fort Carson, Colorado, with a required delivery date of July 22, 2026, and a 20-day lead time from contract award. The item is classified as a non-NSN and is subject to strict packaging requirements per ASTM D3951, with precedence given to all DLA Master List of Technical and Quality Requirements. Packaging and labeling must comply with MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements for Procurement. The unit of issue is EA with no variance allowed in quantity, and inspection and acceptance occur at destination. Shipping must be via the fastest traceable method, excluding parcel post, with delivery directed to the Central Receiving Point, Building 330, at Fort Carson. The freight and mark-for addresses are identical, and the transaction is identified by TCN W91FPV62010007 under project TP 2 and supplement W81RP6. The government point of contact is Darrell Pannell, and the purchase request number is 7017591782.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

NON-NSN ITEMThis contract is for a single unit of a non-NSN item with CAGE code 75755 and part number MIU805005, procured by Deere & Company on behalf of the Department of Defense through the Land Supply Chain. The item is valued at one unit with a total price of one, and delivery is required within 20 days to Fort Carson, Colorado, under FOB Destination terms. The quantity variance is strictly zero percent, meaning no deviations are permitted in the shipped amount. The product must be packaged and labeled in accordance with MIL-STD-129 and ASTM D3951, with packaging and palletization following DLA’s RP001 requirements, and all DLA Master List of Technical and Quality Requirements take precedence over general standards. The item must be shipped via the fastest traceable means, excluding parcel post, and is designated for receipt at Fort Carson’s Central Receiving Point. The required delivery date is July 22, 2026, with the contract identified under solicitation number SPE7L1-26-T-863E, and a point of contact is designated for coordination. The item is for government use only and includes tracking identifiers including a contract number and delivery instructions tied to specific military receiving locations.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

BLOCK, TACKLEThe item described is a BLOCK, TACKLE with NSN 3940-00-792-9882, with a quantity of 50 units, under purchase request 7017585165 and a delivery requirement of 167 days after order. The solicitation is issued under contract number SPE8EE-26-T-2136, posted on July 22, 2026, with responses due by August 3, 2026. This procurement is managed by the Department of Defense through its Construction & Equipment Manu & Con organization, with performance specified in Anniston, Alabama, 36201-4199. The technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons, including foreign nationals within the U.S., requires prior authorization from the Department of State or Commerce. Access is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, submitted the DLA Export-Controlled Technical Data Questionnaire, and received explicit approval from the DLA controlling authority. The NAICS code is 339999, and the primary point of contact is Philip Ferrara, reachable via phone and email provided.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 22 hours ago

DEADLINE

SLING AND WIRE ROPE ASThe contract pertains to the procurement of a sling and wire rope assembly set identified by NSN 3940-01-209-6008, with a quantity of 13 units and a total requirement of 66 items under purchase request 7017586164. Delivery is scheduled within 181 days after order, and the solicitation number is SPE8EE-26-T-2141, issued on July 22, 2026, with responses due by August 3, 2026. The procurement is governed by DLA packaging standards and incorporates technical and quality requirements referenced through R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major unless otherwise stated. Zero non-conformances are required in any sample lot unless the contract specifies otherwise. The place of performance is Tracy, California, and the contract is managed by the Department of Defense through its Construction & Equipment Manu & Con organization, with Philip Ferrara as the primary point of contact. Government identification must be removed from non-accepted supplies, and covered defense information may apply under the terms of this agreement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 22 hours ago

DEADLINE

HYDROSTATIC RELEASEThe contract solicitation SPE8E6-26-T-3830 is a total small business set-aside for the procurement of 300 hydrostatic release units, with a total estimated value of $248,295.00 at a unit price of $827.65 per unit. Deliveries are required to be made FOB origin within 97 days after award, with the destination being the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including standardized barcoding and no special marking requirements. Packaging must adhere to DLA-specific RP001 requirements for palletization, and all units must be preserved using method 10 (clean and dry). The acceptance and inspection point is at the destination, with no tolerance allowed for quantity variance. The contract incorporates technical and quality requirements from the DLA Master List referenced via R and I numbers, including provisions for removal of government identification from non-accepted supplies and covered defense information handling. Hazardous materials packaging and shipping must follow IP025 guidelines, and safety data sheets must be provided in accordance with 29 CFR 1910.1200. All invoicing must be conducted through Wide Area WorkFlow, and payment is governed by DFARS clauses. The solicitation mandates compliance with FAR clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, and small business representation, including affirmative representations of size status and socioeconomic categories. Offerors must possess a valid UEI and CAGE code and comply with cybersecurity requirements under DFARS 252.204-7012. The contract prohibits quantity deviations and requires adherence to U.S.-flag vessel requirements for ocean transport. The original required delivery date is December 16, 2026, with a need ship date of March 27, 2026. The solicitation closed on August 3, 2026, and was issued under NAICS code 339999 for other miscellaneous manufacturing.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Logistics, Transportation, and Destination DeliveryThe contract requires the secure transportation of structural steel plates using flatbed or heavy haul trucking to a designated DoDAAC destination at the New Cumberland facility, with a zip code of 17070-5002. All shipments must adhere to strict loading protocols to ensure cargo integrity and compliance with destination inspection standards, emphasizing safety and regulatory alignment throughout transit. The work falls under NAICS code 484220 for truck transportation of freight and is categorized as a subcontract with a response deadline of August 3, 2026, following a posting date of July 22, 2026. The contracting authority is the Department of Defense through its DDSP New Cumberland Facility, and performance is exclusively tied to the specified location, with no flexibility in delivery points.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the provision of compliant packaging, preservation using method ZZ, and permanent marking of structural steel plates in accordance with military and ASTM standards, ensuring all components meet rigorous defense specifications for durability and traceability. Work must be performed to exact technical requirements that guarantee long-term integrity and identification of steel plates used in critical defense applications. The solicitation is categorized as a subcontract with a NAICS code of 332999 and is hosted by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance designated at the New Cumberland location, zip code 17070-5002. The posting date is July 22, 2026, and proposals must be submitted by August 3, 2026, with no set-aside provisions specified. Bidders are expected to demonstrate capacity to deliver compliant packaging and marking solutions aligned with federal defense logistics standards.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

High-Strength Structural Steel Plate Supply (Grade DH36)The contract calls for the supply of structural steel plates measuring 0.375 inches thick and 60 by 240 inches in dimensions, manufactured to Grade DH36 standards in accordance with ABS rules, ensuring high strength and durability for demanding structural applications. Each plate must be accompanied by full mill certification and must comply with applicable military specifications, verifying material integrity, traceability, and performance under operational conditions. The delivery location is specified as New Cumberland, Pennsylvania, with the place of performance tied to the DDSP New Cumberland Facility under the Department of Defense. The solicitation, posted on July 22, 2026, requires proposals to be submitted by August 3, 2026, and is classified as a subcontract under NAICS code 331221 for rolled structural metal product manufacturing. The contract is managed without any set-aside designation, opening participation to all qualified vendors. Bidders must ensure alignment with military-grade requirements and certified material documentation to meet the stringent quality and compliance standards expected by the Defense Logistics Agency. All responses must be submitted through the designated DIBBS platform using the provided solicitation number.

Rolled Steel Shape Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Air Conditioning Filter ElementsThe contract calls for the supply and delivery of 69 units of air conditioning filter elements identified by NSN 4130015956356, with strict compliance required to military and hazardous materials standards. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses per FAR 19.5, and falls under NAICS code 333415 for heating, air conditioning, and commercial refrigeration equipment manufacturing. The issuing organization is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with the place of performance located at New Cumberland, Pennsylvania, postal code 17070-5002. The opportunity was posted on July 22, 2026, and responses must be submitted by August 3, 2026, at 5:00 PM Eastern Time. Interested parties can access further details through the provided DIBBS portal link.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply Chain and Delivery Logistics (Non-Regulated Transport)The contract requires the transportation and final delivery of packaged soldering components to the DDSP New Cumberland facility in Pennsylvania with a zip code of 17070-5002, ensuring all logistics operations comply with WAWF-compliant documentation standards and include proper kitting services. This subcontract, classified under NAICS code 484220 for general freight trucking, focuses on non-regulated transport and involves end-to-end supply chain coordination to meet precise delivery specifications without the need for special regulatory handling. The solicitation was posted on July 22, 2026, with a deadline for responses set for August 3, 2026, and is managed by the Department of Defense through the DDSP New Cumberland Facility. The work must be performed at the designated delivery location in New Cumberland, PA, and all contractors are expected to adhere to strict documentation protocols to ensure traceability and compliance within the Department of Defense logistics framework. No set-aside classification is specified, and the contract is open to eligible subcontractors capable of meeting the technical and procedural requirements for secure, timely delivery of sensitive electronic components.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the packaging and labeling of soldering and desoldering tips in strict compliance with federal hazardous materials communication regulations, including OSHA HAZCOM, GHS, DLA RP001, and DFARS 252.223-7001. All labeling must adhere to standardized hazard communication protocols to ensure proper identification of chemical risks associated with the products, with packaging designed to maintain integrity and regulatory alignment throughout transit and storage. The work must be executed with precision to meet Department of Defense standards for safety, documentation, and traceability of hazardous substances used in or present on these tips. The solicitation is issued under NAICS code 561910 for other support activities and is classified as a subcontract opportunity with a response deadline of August 3, 2026. Performance is to be conducted at the DLA New Cumberland Facility, identified by zip code 17070-5002. The contracting entity is the Department of Defense through the DDSP New Cumberland Facility, and all deliverables must fully align with DLA and federal regulatory requirements to ensure compliance across the defense supply chain. Participation requires demonstrated expertise in hazardous materials handling and labeling, with an emphasis on consistency, accuracy, and adherence to mandated documentation procedures.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Manufacture of Electric Soldering Tips (TIP, ELECTRIC SOLDER)The contract requires the fabrication of electric soldering tips to meet stringent military-grade standards for durability, electrical conductivity, and material safety, ensuring full compliance with DLA RA001 and DFARS 252.223-7001 regulations. These components are critical for defense-related applications and must be manufactured with precision using approved materials and processes that guarantee long-term performance under demanding operational conditions. The work is classified as a subcontract under NAICS code 332215, indicating specialized metal fabrication activities within the broader industrial sector. The solicitation was posted on July 22, 2026, with a response deadline set for August 3, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the DDSP New Cumberland Facility under the Department of Defense, indicating a direct alignment with defense logistics and supply chain requirements. While no set-aside provisions or point of contact details are specified, the inclusion of federal regulatory frameworks underscores the strict adherence to compliance, quality control, and supply chain integrity expected from the vendor. All deliverables must meet unambiguous military specifications to ensure interoperability and reliability in critical defense systems.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 22 hours ago

DEADLINE

Manufacture of Desoldering Tips (TIP, SUCTION DEVICE)The contract requires the manufacture of precision desoldering tips that fully comply with the DLA Master List RA001 specifications, ensuring strict adherence to performance and quality standards. Production must meet rigorous requirements for thermal resistance, material composition, and dimensional accuracy, with comprehensive quality control and testing protocols applied at every stage to guarantee reliability and consistency. The delivered products must be suitable for use in defense and aerospace applications where precision and durability are critical. The solicitation, titled Manufacture of Desoldering Tips TIP, SUCTION DEVICE, was posted on July 22, 2026, with a response deadline of August 3, 2026, and is classified as a subcontract under NAICS code 332215. The contracting activity is the DDSP NEW CUMBERLAND FACILITY, under the Department of Defense, with performance exclusively located at the New Cumberland facility in Pennsylvania, zip code 17070-5002. All bids must be submitted through the DIBBS system using the provided solicitation link, and bidders are expected to demonstrate proven capability in producing high-precision metallurgical components meeting military-grade specifications.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 22 hours ago

DEADLINE

Transportation & Freight Logistics (FOB Origin to DLA New Cumberland)The contract requires the transportation of 70 units from the manufacturer to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB origin terms, meaning the buyer assumes all transportation risks and costs once the goods leave the supplier’s location. Full logistics execution must include comprehensive freight documentation, real-time delivery tracking, and invoicing compliant with the Web-Enabled Acquisition and Financial System, ensuring seamless integration with federal financial and supply chain processes. The contractor is responsible for end-to-end coordination to guarantee timely, accurate, and auditable delivery to the specified destination. The solicitation, issued under NAICS code 484220 for truck transportation, is classified as a subcontract and was posted on July 22, 2026, with responses due by August 3, 2026. The performance location is clearly identified as 17070-5002 in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. Although no specific set-aside or point of contact is provided, interested parties must submit responses through the designated DIBBS portal prior to the deadline to be considered for award.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires identification of hazardous components within navigational lights and the preparation of Safety Data Sheets compliant with OSHA standards, ensuring all chemical and material risks are accurately documented and classified. The submitted SDS documents must align with federal regulatory requirements and be formally approved by relevant government authorities. Integration with MIL-STD-129 labeling standards is mandatory, ensuring that all hazardous materials are properly marked and coded for consistent identification, handling, and storage across defense logistics systems. This work supports safety, regulatory compliance, and operational readiness within Department of Defense environments. Performance is centered at the New Cumberland facility with a zip code of 17070-5002 and is classified under NAICS code 541620, indicating technical, scientific, or laboratory services related to environmental or safety compliance. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and is structured as a subcontract under the Department of Defense’s DDSP New Cumberland Facility. No set-aside provisions are specified, making it open to eligible subcontractors capable of meeting the rigorous technical and regulatory demands of defense-grade hazardous materials documentation and labeling.

Environmental Consulting Services

POSTED

about 22 hours ago

DEADLINE

Specialized Packaging and Military-Compliant Labeling ServicesThe contract requires specialized packaging, preservation, and labeling services that fully comply with MIL-STD-2073-1E for defense shipments, ensuring all items are properly protected against environmental and physical damage during transit and storage. This includes the application of MIL-STD-129 compliant labeling with precise consignee markings and mandatory hazardous material warnings to meet U.S. Department of Defense regulatory standards. All work must be executed to ensure traceability, safety, and readiness for military logistics operations. The solicitation is issued as a subcontract under the NAICS code 325998, with a response deadline of August 3, 2026, and performance will be centered at the New Cumberland facility with a zip code of 17070-5002. The contracting authority is the Department of Defense through the DDSP New Cumberland Facility, and the work is critical to supporting defense supply chain integrity by ensuring all packaging and labeling meet exacting federal specifications for hazard communication and item identification.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 22 hours ago

DEADLINE

Manufacture of Navigational Lights (Prime-Level Assembly & Testing)The contract requires the full manufacturing, assembly, quality control, and testing of 70 units of the GLAMOX AQUA SIGNAL CORPORATION model 34000-7 navigational lights, all to be produced in strict accordance with military specifications. This includes adherence to MIL-STD standards for packaging and labeling to ensure compliance with Department of Defense requirements. The work is classified as a subcontract with the NAICS code 336413, indicating specialized manufacturing of marine and aerospace lighting systems. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contracting activity is managed under the DDSP NEW CUMBERLAND FACILITY, a unit of the Department of Defense. All deliverables must be completed and submitted by the response deadline of August 3, 2026, following a solicitation posted on July 22, 2026. There is no set-aside designation specified, and the contract does not indicate a prime contractor or point of contact detail.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE