Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing of Synthetic Rubber Valve Disks (NSN 4820007260221)

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 193 nonmetallic valve disks for prime contractors supporting DLA supply contracts. The components must be fabricated from synthetic rubber type SB910 ABEF in accordance with MIL-SPEC MIL-R-3065, utilizing precision machining to meet strict outer diameter, inner diameter, and height tolerances. Each disk is required to withstand pressures up to 175 PSI and operate within a temperature range of -40°F to +180°F. The project is managed under the Department of Defense through the DDSP New Cumberland Facility. Compliance with MIL-STD-2073-1E and DFARS 252.204-7012 is mandatory for all deliverables. The contract falls under NAICS code 326199, with performance taking place in New Cumberland, Pennsylvania.

General Info

Manufacture and supply 193 synthetic rubber valve disks for DLA supply contracts.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

326199 - All Other Plastics Product Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7MC-27-T-0904.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DISK, VALVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies nonmetallic valve disks for prime contractors on DLA supply contracts. Fabricates disks using synthetic rubber type SB910 ABEF per MIL-SPEC MIL-R-3065 with precision machining to specific OD, ID, and height tolerances. Components must withstand 175 PSI and temperatures from -40°F to +180°F. Requires compliance with MIL-STD-2073-1E and DFARS 252.204-7012. Delivers 193 finished valve disks.

Similar Contracts

Same NAICS industry code

PreMark Rumble Bar Kit SupplyThis subcontract involves the procurement and delivery of manufacturer-approved rumble bar kits for prime contractors working on California Department of Transportation highway projects. Specifically, the scope of work requires the supply of PreMark In-Lane Rumble Bar, White Item ID PM602002, which includes both the base and rumble bar manufactured by Ennis-Flint / PPG PreMark. The supplier is responsible for delivering these white rumble bar kits directly to the project site in San Diego and providing all necessary manufacturer product brochures and certificates of compliance. The opportunity was posted on October 21, 2026, with a response deadline of November 4, 2026. Classified under NAICS code 326199, this contract ensures that the materials used on Caltrans projects meet strict manufacturer and agency specifications for highway safety and infrastructure.

California Department of Transportation

POSTED

about 16 hours ago

DEADLINE

Supply of Critical Application O-Ring (NSN 5331011689114)This subcontract involves the procurement of one high-specification O-ring, identified by NSN 5331011689114 and Marotta Controls Inc part number 4400871-0140, for prime contractors supporting DLA Weapons Support Land Supply Chain projects. The component must have a non-extendable shelf life of 60 months and strictly adhere to the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements. The delivery is designated as FOB Destination to the USS Ronald Reagan CVN 76. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

High-Performance PTFE and Fitting SupplierThis subcontract opportunity with the Department of Defense DLA Weapons Support Fluid Handling Division involves the supply of raw polytetrafluoroethylene tubing and specialized flarless-to-flarless fittings. The required materials must be capable of withstanding high temperatures and medium pressure, and all fittings must be delivered with certified mill test reports to ensure quality and compliance. The performance of this contract will take place in Cherry Point, North Carolina. Suppliers must strictly adhere to environmental regulations, specifically prohibiting the use of intentional mercury and Class I ozone-depleting chemicals. Interested parties must submit their responses by November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

High-Density Rigid Closed Cell Foam SupplierThis subcontract opportunity is for the supply of raw high-density rigid closed cell foam to prime contractors supporting DLA supply contracts. The required material must be manufactured with a specific density of 4.5 lbs/cu ft and dimensions compatible with 96" x 48" x 3.12" panels. The supplier is responsible for delivering the raw foam stock to the fabricator and providing necessary material certifications to ensure compliance with the Buy American Act and the absence of Class I ozone-depleting chemicals. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt, this procurement is designated as a Total Small Business Set-Aside. The performance location is situated in New Cumberland, Pennsylvania. Interested parties must respond by November 2, 2026, regarding this requirement categorized under NAICS code 326199.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

Vehicular Cab Insulation Panel ManufacturerThis subcontract opportunity is for the fabrication of 38,000 custom-cut rigid closed cell foam insulation panels for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The panels must be manufactured to dimensions of 96.0 by 48.0 by 3.12 inches with a density of 4.5 lbs/cu ft. Production requires the use of industrial CNC or precision foam cutting equipment and must strictly adhere to MIL-STD-1916 or ASQ H1331 standards, with a total prohibition on Class I ozone-depleting chemicals. The contract is designated as a Total Small Business Set-Aside under NAICS code 326199. Finished products are to be delivered FOB Origin to DLA Distribution in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

OEM Manufacturer of ABS/Elastomeric Polymer EarplugsThis subcontract involves the original equipment manufacturing of plastic, premolded, triple flange earplugs for the Department of Defense Medical Supply Chain. The manufacturer is responsible for utilizing injection molding or casting with ABS/elastomeric polymer to produce washable and reusable earplugs that achieve a Noise Reduction Rating of 25 dB. The project requires the use of precision molding and acoustic testing equipment to ensure all products comply with Medical Marking Standard No. 1. The scope of work culminates in the delivery of 5,000 boxes of finished, paired earplugs. This opportunity is categorized under NAICS code 326199 and is designated for performance at FPO 96663-1290. Interested parties must adhere to the response deadline of October 26, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 21 hours ago

DEADLINE

BUNA-N Gasket SupplyThis subcontract involves the manufacture and supply of BUNA-N gaskets for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for sourcing or producing gaskets formulated from Nitrile rubber compound, ensuring that all material properties and dimensions strictly comply with federal specification A-A-59326. These components are intended for assembly with Quick Disconnect Reducers. The project falls under NAICS code 326199 and is designated for performance in Albany. Interested parties must adhere to the timeline established by the posting date of October 21, 2026, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

Supply of O-Rings (NSN 5331-01-597-6313)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Supply of Light-Transmitting Materials

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Supplier of O-Ring (PN: 5331-01-697-3533)This subcontract involves the sourcing and manufacture of a specialized O-ring, part number 5331-01-697-3533, to support prime contractors under the DLA Weapons Support Land Supply Chain. The supplier must ensure the component adheres to all technical requirements specified in the DLA Master List. Strict adherence to military standards is required for packaging and identification, specifically utilizing medium-duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117, with markings applied according to MIL-STD-129 and MIL-STD-130N. The scope of work culminates in the delivery of one O-ring to the USS Daniel Inouye DDG 118. This procurement falls under NAICS code 326199 and is managed by the Department of Defense. Interested parties must note the response deadline of October 31, 2026, for this specific requirement.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Supply of Press Plastic Sheets (NSN 9330015877925)This subcontract involves the manufacture or sourcing of 2,001 press plastic sheets to support prime contractors on Defense Logistics Agency supply contracts. The materials must strictly adhere to NSN 9330015877925 and approved part numbers 644705-01M1 for Caterpillar or 6444705-01M1 for AMZ Alabama/BAE Systems. The selected provider is responsible for ensuring all items meet DLA packaging and marking standards to facilitate international shipment to Kuwait. This requirement falls under NAICS code 326199 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

Military-Grade Decal Substrate and Adhesive Supply

CHERRY POINT PHANTOM RD BLDG

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Custom Tooling for Valve ProductionThis subcontract, titled Custom Tooling for Valve Production, involves the design and fabrication of specialized tooling for prime contractors supporting DLA supply contracts. The scope of work focuses on the engineering and production of molds, dies, and jigs specifically tailored to the geometry of NSN 4820013360221. To ensure precision and compliance with the DLA Master List, the contractor must utilize CAD/CAM software, CNC milling, and EDM processes to deliver completed tooling sets. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Operating under NAICS code 333515, the opportunity was posted on October 21, 2026, with a response deadline set for November 2, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 21 hours ago

DEADLINE

Valve Component Casting and ForgingThis subcontract, titled Valve Component Casting and Forging, involves the supply of raw cast or forged metal components for prime contractors fulfilling DLA supply contracts. The scope of work focuses on the production of valve bodies and internal components specifically adhering to NSN 4820013360221 specifications and the material requirements cited in the DLA Master List. Production requires the use of industrial foundries, forging presses, and specialized molds to deliver the raw components. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland. The opportunity was posted on October 21, 2026, with a response deadline of November 2, 2026. It is categorized under NAICS code 331511.

POSTED

about 21 hours ago

DEADLINE

Safety Relief Valve FabricationThis subcontract through the Department of Defense DDSP New Cumberland Facility involves the fabrication of two Safety Relief Valves under NSN 4820013360221. The scope of work encompasses full fabrication, precision machining, and assembly, utilizing specialized machining centers and testing equipment to ensure accurate pressure settings for prime contractors fulfilling DLA supply contracts. The project requires strict adherence to quality and technical standards, including SAE AS9003 or ISO 9001 certification and compliance with ASTM D3951, MIL-STD-129, and DLA RP001. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 2, 2026.

Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Labeling ServicesThis subcontract for MIL-SPEC Packaging and Labeling Services supports prime contractors delivering supply contracts to the Defense Logistics Agency. The scope of work involves performing specialized military-grade packaging, labeling, and palletization of materiel. Specifically, the provider must ensure all packaging adheres to ASTM D3951, apply markings and 2D Data Matrix codes in accordance with MIL-STD-129, and follow RP001 DLA Packaging Requirements using 2D Barcode printing equipment to deliver shipment-ready units. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488510 and was posted on October 21, 2026, with a response deadline of October 26, 2026.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Power Supply Unit (NSN 6130-01-204-7778) SupplierThis subcontract involves the manufacture or procurement of three fully functional Power Supply units, part number 2312002 and NSN 6130-01-204-7778, to support prime contractors delivering on DLA supply contracts. The work is managed under the Department of Defense for the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The supplier must ensure zero-defect conformance in accordance with MIL-STD-1916 or ASQ H1331 and strictly adhere to NAVSEA 5100-003D mercury restrictions and DFARS 252.223-7008. Additionally, the contractor is required to maintain cybersecurity compliance as outlined in NIST SP 800-171.

Motor and Generator Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Round Copper Alloy 464 Metal BarThis subcontract involves the supply of 198 feet of round copper alloy metal bar for prime contractors supporting Department of Defense supply contracts at the DDSP New Cumberland Facility. The required material is Copper Alloy UNS C46400 with H02 temper, featuring a 1.000 inch diameter and provided in lengths between 10 and 12 feet. Strict compliance with technical and logistical standards is required, including QSLD listing and Mill-Material Certification. All materials must be preserved according to ASTM B900 and packed and marked in accordance with MIL-STD-129 and MIL-STD-2073-1E. The performance of this contract will take place in New Cumberland, Pennsylvania.

Secondary Smelting, Refining, and Alloying of Copper

POSTED

about 21 hours ago

DEADLINE

Military-Standard Packaging and MarkingThis subcontract opportunity, titled Military-Standard Packaging and Marking, is issued by the Department of Defense for the DDSP New Cumberland Facility. The project requires specialized military-grade packaging and marking services for prime contractors working on DLA Weapons Support projects. The selected provider must ensure all shipments are processed in strict accordance with MIL-STD-2073-1E and MIL-STD-129, utilizing industrial labeling equipment and MIL-SPEC materials to deliver products ready for FOB Origin shipment. The contract is designated as a Total Small Business Set-Aside under NAICS code 561910. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 2, 2026.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Electro-Mechanical Integration and Motor AssemblyThis SBA Total Small Business Set-Aside subcontract involves the supply and integration of electrical motors, wiring, and control elements for prime contractors supporting DLA Weapons Support projects. The scope of work includes the winding, soldering, and electrical assembly of electro-mechanical drive systems to produce fully assembled and tested rotary actuators. All work must adhere to the DLA Master List of Technical and Quality Requirements and necessitates the use of specialized sensors and assembly jigs. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance located in New Cumberland. Interested parties must provide a CMMC Level 2 Self-Assessment to meet security requirements. The solicitation was posted on October 21, 2026, with a response deadline of November 2, 2026, falling under NAICS code 335312.

Motor and Generator Manufacturing

POSTED

about 21 hours ago

DEADLINE

Precision Machining and Fabrication of Rotary Actuator ComponentsThis subcontract opportunity, issued by the Department of Defense for the DDSP New Cumberland Facility, involves the precision machining and fabrication of rotary actuator components. The selected contractor will perform milling, turning, and precision grinding to manufacture mechanical housing and internal rotary components for Part Number 157710-30. All work must adhere to the DLA Master List of Technical and Quality Requirements, utilizing aerospace-grade alloys and high-precision CNC equipment. This is a Total Small Business Set-Aside under NAICS code 332710, with performance taking place in New Cumberland. Prospective bidders must provide a CMMC Level 2 Self-Assessment to be eligible. The response deadline for this requirement is November 2, 2026.

POSTED

about 21 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-27-Q-0013

POSTED

about 21 hours ago

DEADLINE

COMPENSATOR, BUOYANCY, D

Solicitation # SPE8E6-27-T-0320

All Other Rubber Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE7MC-27-Q-0014

Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS