Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine-Grade Coating and Finishing Services

Open

Federal

Response Deadline11/19/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Marine-Grade Coating and Finishing Services supports the DLA Weapons Support Fluid Handling Division within the Department of Defense. The selected provider will be responsible for surface preparation and the application of anti-corrosive coatings on marine hatches to ensure they are ready for final assembly. All work must be performed according to TDP specifications and conducted at the place of performance in New Cumberland. Strict adherence to safety and regulatory standards is required, specifically compliance with 29 CFR 1910.1200 and the provision of Safety Data Sheets in accordance with Federal Standard No. 313. This opportunity falls under NAICS code 332813, with a response deadline set for November 19, 2026.

General Info

Marine-grade coating and finishing for DoD hatches in New Cumberland by November 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-3002.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HATCH, MARINE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 12:00:00 PM ESTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Applies protective coatings and finishes for prime contractors on DLA Weapons Support Fluid Handling Division projects. Performs surface preparation and application of marine-grade anti-corrosive coatings per TDP specifications. Ensures compliance with 29 CFR 1910.1200 and provides Safety Data Sheets (SDS) per Federal Standard No. 313. Delivers finished, coated marine hatches ready for assembly.

Similar Contracts

Same NAICS industry code

Specialized Surface Treatment and FinishingThis subcontract for Specialized Surface Treatment and Finishing supports the DLA Weapons Support Land Supply Chain by providing surface treatment and plating for mounting brackets. The contractor is responsible for applying finishes in strict accordance with the 19207 series drawings and QAP 16236 / SQAPCARCLTPHOS81361 specifications using industrial plating tanks and chemical conversion processes. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Due to the nature of the work, the contractor must maintain full compliance with environmental regulations and ITAR/EAR export controls to ensure the secure delivery of finished, coated components.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Phosphate Coating Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Component Finishing and CoatingThe Aerospace Component Finishing and Coating subcontract involves providing specialized surface treatment and coating services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes applying anodizing, passivating, or painting to bracket components in strict accordance with technical drawings and the DLA Master List of Technical and Quality Requirements. The contractor is responsible for ensuring that all finish thickness and adhesion meet rigorous military specifications before delivering the finished components. This opportunity is a total small business set-aside under NAICS code 332813, managed by the Department of Defense for the DLA Weapons Support ASC Supplier OE and AF Division. Performance will take place in Portsmouth, New Hampshire. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Finishing and Coating for Actuating HeadsThis subcontract involves providing specialized aerospace finishing and coating services for Linear Actuating Cylinder Heads to support prime contractors under the DLA Weapons Support ASC. The scope of work requires the application of aerospace-grade plating or anodizing in strict accordance with TDP specifications to ensure necessary corrosion resistance. All delivered components must adhere to ASTM D3951 packaging standards. The project is managed by the Department of Defense and will be performed at Tinker AFB. To be eligible, providers must maintain ISO 9001:2015 certification and ensure full ITAR compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Cadmium and Chromate Plating ServicesThis subcontract for the Department of Defense DLA Weapons Support ASC Commodities Division involves providing specialized chemical plating and finishing services for steel screw substrates. The selected contractor will be responsible for applying cadmium plating and chromate finishes that strictly adhere to NASM24629 thickness and adhesion standards. To qualify, the provider must possess industrial plating tanks and maintain a quality management system compliant with either ISO 9001 or SAE AS9003. The project is categorized under NAICS code 332813 and will be performed at Hill AFB. Interested parties must respond by November 16, 2026, to provide the required plated and finished steel screws as specified in the contract requirements.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ferrous Surface Treatment and Coating (P19)This subcontract for the DLA Weapons Support Land Supply Chain involves providing specialized surface treatment and P19 coating for mounting brackets. The scope of work includes comprehensive surface preparation and cleaning of bare ferrous surfaces to ensure corrosion prevention in accordance with strict military specifications. All finished components must be delivered ready for final inspection. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Due to the nature of the defense articles involved, the contractor must maintain full ITAR and EAR compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Specialized Plating and Phosphate CoatingThis subcontract, titled Specialized Plating and Phosphate Coating, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament. The project involves performing phosphate coating and surface treatments on pedal components for prime contractors. All work must be executed in strict accordance with Reference QAP 16236 SQAPCARCLTPHOS81361 and CDRL-81361CARPH-17272, while maintaining full compliance with FED-STD-313. The contractor is required to ensure that no Class I Ozone Depleting Chemicals are used during the process and must hold JCP certification to access necessary technical drawings. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, under NAICS code 332813.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Environmental Coating and Finishing ServicesThis subcontract for Environmental Coating and Finishing Services supports the DLA Weapons Support Land Supply Chain by providing protective coatings for prime contractors. The scope of work requires the application of surface treatments in strict accordance with Drawing 19207 12443771, with a specific prohibition on the use of hexavalent chromium and Class I ozone-depleting chemicals. All finished coated panels must meet the specifications of Federal Standard No. 313, and the contractor is responsible for providing Safety Data Sheets as mandated by 29 CFR 1910.1200(g). The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813 for the Department of Defense. Interested parties must submit their responses by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

NADCAP Certified Phosphate and CARC Coating ServicesThis subcontract involves providing specialized chemical surface treatments for the DLA Weapons Support Land Supply Chain. The scope of work requires the application of phosphate coatings according to MIL-STD-171, MIL-DTL-16232, and TT-C-490, as well as the application of high-temperature coatings and Chemical Agent Resistant Coatings using industrial coating tanks. The primary deliverable for this effort is one finished Loop Clamp with certified coatings. To be eligible for this project, the contractor must hold PRI/NADCAP certification specifically for the phosphate process. Performance will take place at Hunter AAF, and the project falls under NAICS code 332813. Interested parties must respond by November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Phosphate Coating ServicesThis subcontract for the DLA Weapons Support Land Supply Chain involves providing specialized phosphate coating services for shaft assemblies. The selected supplier will utilize industrial plating tanks to apply coatings that adhere to strict military corrosion requirements. Final deliverables must include the coated shaft assemblies along with a formal certification of the coating process. To be eligible, suppliers must hold the RQ036 Phosphate Coating Supplier Certification and demonstrate the capacity to handle hardware controlled under ITAR and EAR regulations. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

NADCAP-Approved Special Processing (Heat Treat/Plating/NDT)This subcontract involves providing specialized aerospace surface treatments, heat treating, and non-destructive testing for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes executing anodizing, chemical filming, heat treatment, and ultrasonic inspection of structural plates in strict accordance with drawing EI-011623240. All processed components must be delivered with NADCAP-certified test reports to ensure quality and technical compliance. The contractor must maintain NADCAP accreditation and adhere to all ITAR and EAR regulations. Performance of these services is centered at Tinker AFB, with the project falling under NAICS code 332813. Interested parties must respond by November 16, 2026, to meet the requirements set forth by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Passivation Finishing ServicesThis subcontract for Passivation Finishing Services is issued by the Department of Defense through the DLA Weapons Support Fluid Handling Division. The project involves performing chemical passivation on corrosion-resisting steel components, specifically steel tube elbows used for hydraulic tube fittings, to remove surface contaminants and improve corrosion resistance in accordance with strict military specifications. The work requires the use of specialized chemical passivation baths and surface testing equipment to ensure all delivered components meet the necessary quality standards for prime contractors. The performance of this contract will take place at Hill AFB, zip code 84056-5734. Interested parties should note that the solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026. The requirement falls under NAICS code 332813, focusing on the delivery of high-quality passivated steel components to support defense infrastructure.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Supply of Packing Assembly (NSN 5330-01-397-7530)This subcontract involves the supply of 667 Packing Assemblies (NSN 5330-01-397-7530) for the DLA Weapons Support Fluid Handling Division. The selected provider must source authentic parts from approved manufacturers, specifically Marvin Engineering, Saint-Gobain, or Trelleborg, while maintaining full traceability. All deliveries to DLA Distribution must adhere to MIL-STD-129 and MIL-STD-2073-1E marking standards. The opportunity is a total small business set-aside under NAICS code 423840, with performance taking place at Robins Air Force Base. To be eligible, contractors must hold JCP certification and meet CMMC Level 2 requirements. Responses are due by November 19, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Manufacturing of Packing Assembly (NSN 5330-01-397-7530)This subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, requires the manufacture and delivery of 667 warranted packing assemblies under NSN 5330-01-397-7530. Production must strictly adhere to source-controlled drawing NR 98752 9436127, Rev B, and includes a mandatory First Article Test. Finished items must be packaged in MIL-DTL-117 Type II Class C Style 1 bags, with performance taking place at Robins Air Force Base. The opportunity is a total small business set-aside under NAICS code 339991. To be eligible, contractors must maintain approved source status, hold JCP certification for ITAR and EAR data, and meet CMMC Level 2 cybersecurity requirements. The response deadline for this solicitation is November 19, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720200082546)This subcontract involves the supply of two nonmetallic hose assemblies, identified by NSN 4720200082546 and Part Number E2D-PA1RV, for prime contractors under the DLA Weapons Support Fluid Handling Division of the Department of Defense. The selected provider is responsible for manufacturing or sourcing the assemblies and ensuring all items are packaged according to RP001 DLA Packaging Requirements and marked in compliance with MIL-STD-129. Performance for this contract will take place in Norfolk, Virginia. To be eligible, the contractor must maintain active registrations in both SAM and WAWF. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, falling under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Hydraulic Hose Protective Sleeve SupplierThis subcontract, managed by the DLA Weapons Support Fluid Handling Division of the Department of Defense, requires the supply of 12 protective sleeves for hydraulic hoses. The supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN 4720-99-349-5721 and part numbers G406/4940 and G406/4940/3. Critical compliance requirements include adherence to Class I ozone depleting chemical restrictions and MIL-STD-129 standards for shipment and storage marking. The place of performance for this contract is located in Texarkana, Texas, under NAICS code 333998.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Supply of Hydraulic Link and Pin

POSTED

DEADLINE

Metallic Hose Assembly Manufacturing

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Nonmetallic Hose Assembly Manufacturing/Supply

Jewelry and Silverware Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Kitting for Critical HardwareThis subcontract involves providing specialized packaging and kitting services for critical hardware on behalf of the DLA Weapons Support Fluid Handling Division. The primary scope of work focuses on the packaging of critical O-rings using opaque, waterproof, and greaseproof bags to protect against UV deterioration, ensuring all materials are mercury-free. All deliverables must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards to ensure hardware is fully labeled and ready for DLA Distribution shipment. The project is managed under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 19, 2026, for this Department of Defense requirement.

Freight Transportation Arrangement

POSTED

DEADLINE

Specialized O-Ring Manufacturing (NSN 5331001651975)This subcontract involves the manufacture and supply of 11,086 high-performance O-rings, identified by NSN 5331001651975, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The production must adhere to SAE AS3208A and SAE AMS7276J standards using QPL-approved processes, with quality sampling conducted according to MIL-STD-1916 or ASQ H1331. Delivery of the components is required FOB Origin. To be eligible, the provider must maintain QPL approval and hold either SAE AS9003 or ISO 9001 certification. The project falls under NAICS code 339943 and is associated with the Department of Defense. Performance for this contract is centered in New Cumberland, Pennsylvania.

Marking Device Manufacturing

POSTED

DEADLINE

Supply of Outlet, Boss Assembly (NSN 4730-01-087-1345)This subcontract involves the supply of one precision-machined Outlet, Boss assembly, identified as NSN 4730-01-087-1345, for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing the assembly using traditional methods, as additive manufacturing is strictly prohibited. All work must adhere to the DLA Master List of Technical and Quality Requirements, with specific compliance required regarding environmental restrictions on mercury and ozone-depleting chemicals. The final product must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. This project falls under NAICS code 332710 and is to be performed in Silverdale, Washington. Interested parties must respond by November 19, 2026.

POSTED

DEADLINE

Nonmetallic Tubing Manufacturer/Supplier

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract involves providing specialized packaging, marking, and palletization services for prime contractors fulfilling DLA supply contracts. The scope of work requires strict adherence to military standards, specifically MIL-STD-2073-1E for item preparation, MIL-STD-129 for marking, and RP001 DLA Packaging Requirements for palletization. All shipments must utilize military-specification packaging materials and standardized shipping pallets to ensure they are ready for transport. The contract is managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division. The final deliverable is a fully packaged and marked shipment destined for the USS CHAFEE DDG 90, with the place of performance located at FPO 96662. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, falling under NAICS code 493110.

General Warehousing and Storage

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manganese Phosphate Coating Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Specialized Finishing and Coating

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Phosphate Coating Services

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Brown Anodizing for Aluminum Components

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Phosphate and Manganese Coating Services

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Aerospace-Grade Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Surface Finishing and Coating for Electronic Housings

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Phosphate Coating Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Industrial Coating and Surface Finishing for Control Pedals

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Passivation and Polishing Services for Metallic Tubing

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aerospace Special Process Treatment

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Industrial Coating and Surface Treatment

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS