Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Hardware & Specialty Fabrications

Active

Federal

Response Deadline11/16/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Marine Hardware and Specialty Fabrications supports prime contractors on USCG vessel projects under the Department of Homeland Security. The scope of work involves the supply and installation of specialized marine hardware and closures, specifically focusing on the renewal of Capastic fairing and depth sounders, the assessment of watertight closures, and the maintenance of stern launch doors. Additionally, the contractor is responsible for renewing cathodic protection and zinc anodes. The project is managed by agency CG-SEA-C21 and will be performed in Santa Barbara, California. Interested parties must adhere to the response deadline of November 16, 2026. The contract falls under NAICS code 332312, ensuring the delivery of fully installed hardware and renewed anodes to maintain vessel integrity and performance.

General Info

Marine hardware installation and maintenance for USCG vessels in Santa Barbara by November 2026.

Agency

Department Of Homeland Security → CG-SEA-C21

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Santa Barbara, CA, 93109, USA

Set-Aside

NONE

Documents

This scope was carved out of 70ZU0127PBPLBLACKFIN.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

USCGC BLACKFIN (WPB 87317) DRYDOCK FY27

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 04:00:00 PM UTCin 25 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → CG-SEA-C21

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → CG-SEA-C21

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and installs specialized marine hardware and closures for prime contractors on USCG vessel projects. Renews Capastic Fairing/Depth Sounders, assesses watertight closures, maintains stern launch doors, and renews cathodic protection/zinc anodes. Delivers installed hardware and renewed anodes.

Similar Contracts

Same NAICS industry code

ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)

Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf

Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This opportunity is designated as a small business set-aside, welcoming applications from SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested offerors must be fully bonded and insured to be eligible for the contract. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026. All inquiries and submissions should be directed to the primary point of contact, Thomas Sheehan.

Parsons Corporation

POSTED

DEADLINE

Fan Housing and Casing FabricationThis subcontract for Fan Housing and Casing Fabrication supports prime contractors on Army Contracting Command Detroit Arsenal projects under the Department of Defense. The scope of work involves the manufacture of outer structural housings and shrouds, utilizing specialized processes such as sheet metal fabrication, precision bending, welding, and military-spec surface treatments to ensure environmental durability. Production requires the use of industrial welding equipment, CNC press brakes, and laser or plasma cutters to deliver completed casings. To be eligible, providers must maintain a certified Quality Management System and hold DD 2345 certification. The opportunity is categorized under NAICS code 332312, with a response deadline set for November 2, 2026.

POSTED

about 4 hours ago

DEADLINE

14-Foot Stake Bed UpfitThis subcontract for the 14-Foot Stake Bed Upfit involves the fabrication and installation of a 14-foot bed for prime contractors working on City of Cheyenne Sanitation Division projects. The scope of work requires the engineering and mounting of the bed to a 15,000 GVWR chassis utilizing specialized mounting hardware, with final delivery of the completed vehicle. All work must strictly adhere to City of Cheyenne specifications and include a comprehensive manufacturer's warranty for the stake bed. The project is managed through the Wyoming Purchasing agency, with a response deadline set for November 16, 2026.

POSTED

about 19 hours ago

DEADLINE

Heavy-Duty Irradiator Mounting Stand FabricationThis subcontract, titled Heavy-Duty Irradiator Mounting Stand Fabrication, involves the production of fixed stands and mounting cradles for prime contractors supporting IEMA-OHS nuclear safety projects. The scope of work requires the construction of steel stands capable of supporting a 250 lbs load with beam line heights ranging from 1.0 to 1.5 meters. Additionally, the contractor must fabricate a specialized IDNS Cradle designed for 200 lb irradiators, ensuring full compatibility with JLS irradiators through precision drilling and tapping for X-axis alignment. Managed by the Illinois Division of Nuclear Safety under NAICS code 332312, the project culminates in the delivery of the completed irradiator stand and IDNS cradle. The solicitation was posted on October 21, 2026, with a response deadline set for November 6, 2026.

DIVNUCLSFTY588 - Division of Nuclear Safety

POSTED

about 20 hours ago

DEADLINE

Heavy Equipment Welding and FabricationThis subcontract for Heavy Equipment Welding and Fabrication supports the City of Conroe Fleet Department by providing structural welding and metal fabrication services for prime contractors. The scope of work involves the repair and replacement of damaged body parts and panels utilizing industrial metal stock, cutting torches, and welding machines. All work must be performed in strict accordance with OEM specifications and maintain full compliance with OSHA safety standards to ensure the delivery of high-quality structural components. The opportunity is categorized under NAICS code 332312 and was posted on October 21, 2026. Interested parties must submit their responses by the deadline of November 5, 2026. This project is managed through the Fleet agency in Texas and focuses on the maintenance and restoration of heavy equipment assets.

POSTED

about 22 hours ago

DEADLINE

Precision Fabrication of Foldlocks (NSN 5420-00-507-7055)This subcontract involves the precision fabrication and assembly of eight Foldlock, Roadway to Bow Ponton units for prime contractors supporting Department of Defense DLA supply contracts. The scope of work includes the manufacture of structural components and locking mechanisms specifically for NSN 5420-00-507-7055, with all production adhering to the provided technical data package. Strict compliance with military standards is required, specifically MIL-STD-1916 for quality inspection and MIL-STD-129 and MIL-STD-130N for marking. To be eligible, the contractor must maintain ISO 9001:2015 certification and be part of the US/Canada Joint Certification Program. Performance will take place in New Cumberland, Pennsylvania.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

Fabrication and Supply of Shipping Support Cradle KitsThis subcontract involves the fabrication and supply of 2,002 shipping support cradle kits for prime contractors working on DLA Troop Support projects. The manufacturer is required to produce the kits according to P/N 150475 and NSN 8145015121025, ensuring all items are completed, labeled, and packaged. Strict adherence to packaging standards ASTM D3951 and MIL-STD-129 is required, with palletization following DLA RP001 guidelines. The project is managed under the Department of Defense through Construction & Equipment Containers and falls under NAICS code 332312. To be eligible and compliant, the provider must meet the requirements of the Buy American Act and the Berry Amendment. The response deadline for this opportunity is November 2, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

Mounting Bracket Manufacturing (NSN 5340-01-060-2494)This subcontract involves the manufacture of 37,000 mounting brackets for prime contractors supporting the Department of Defense DLA Weapons Support Land Supply Chain. The fabrication must strictly adhere to Basic Drawing NR 19207 12253516 Revision B, with identification markings meeting MIL-STD-130N standards. Quality assurance sampling is required to be performed in accordance with either MIL-STD-1916 or ASQ H1331. The selected provider must maintain ISO 9001:2015 certification and ensure full compliance with FAR 52.246-15. This project falls under NAICS code 332312 and requires the delivery of 37,000 finished units. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Fabrication of Searchlight Bracket RacksThis subcontract involves the fabrication and supply of two searchlight bracket racks for prime contractors supporting DLA supply contracts for the USS MARINETTE (LCS 25). The manufacturer is required to produce parts according to NSN 6230011905393 and Carlisle & Finch part numbers 4432 and 7371. All materials must be mercury-free in compliance with NAVSEA 5100-003D. The scope of work includes specific marking requirements per RQ017 and MIL-STD-129, with packaging performed according to MIL-STD-2073-1E. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the project falls under NAICS code 332312 and requires the delivery of completed, marked, and packaged racks to FPO 34088.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Battery Box Enclosure and Hardware FabricatorThis subcontract involves the fabrication of battery box enclosures and mounting hardware for prime contractors supporting Defense Logistics Agency supply contracts for the USS THOMAS HUDNER DDG116. The selected manufacturer must produce enclosures according to NSN 6160-01-597-1402 specifications using professional metal fabrication equipment. All deliverables must strictly adhere to military marking standards per MIL-STD-129 and packaging requirements per MIL-STD-2073-1E. The contract requires full compliance with the Buy American Act and the Berry Amendment. Operating under NAICS code 332312, the provider is responsible for the delivery of completed enclosures along with all necessary hardware. The opportunity was posted on October 21, 2026, with a response deadline of November 2, 2026.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

Fabrication and Supply of Stainless Steel Basin StandThis subcontract involves the fabrication and supply of a heavy-duty tubular stainless steel basin stand, identified by NSN 6530016175480, for prime contractors supporting Department of Defense DLA supply contracts. The required unit must feature a 32-inch tall frame designed to hold two 13-inch basins, including the installation of internal rubber bumpers and strict adherence to Medical Marking Standard No. 1. The project is managed under the Medical Supply Chain FSH and requires full compliance with the Buy American Act and the Berry Amendment. The final deliverable consists of one completed basin stand delivered in sealed commercial packaging according to RP001 DLA specifications. Performance for this contract is centered in Hampton, Virginia.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 23 hours ago

DEADLINE

Supply of Double Angle Brackets (NSN 5340015621618)This subcontract involves the supply of 16 double angle brackets for prime contractors supporting DLA supply contracts. The contractor is responsible for manufacturing or sourcing units that strictly adhere to NSN 5340015621618 specifications. All items must be packaged according to RP001 DLA Packaging Requirements and marked in compliance with MIL-STD-129 for destination delivery to Barstow, California. The agreement mandates strict adherence to regulatory standards, specifically DFARS 252.204-7012 and DFARS 252.223-7008 concerning the use of hexavalent chromium. Managed under NAICS code 332312 for the Department of Defense, the contract is issued through the DLA Weapons Support Land Supplier Opns Engines.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → CG-SEA-C21

Same awarding agency

Interior Marine Flooring SpecialistThis subcontract opportunity, titled Interior Marine Flooring Specialist, involves the removal and replacement of interior deck coverings for prime contractors working on USCG vessel projects. The scope of work specifically includes the renewal of interior deck covering systems and jointer decks to deliver fully installed interior flooring. The project is managed under the Department of Homeland Security for agency CG-SEA-C21 and will be performed in Santa Barbara, California. Interested parties must respond by November 16, 2026, for this requirement categorized under NAICS code 238330.

Flooring Contractors

POSTED

about 4 hours ago

DEADLINE

Marine Plumbing & Piping (Sea Water Systems)This subcontract opportunity involves providing specialized marine plumbing and piping services for sea water and fluid systems on USCG vessel projects. The selected contractor will work under prime contractors to execute general maintenance and repairs, ensuring that all sea water systems are fully maintained and leak-free. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work will be performed in Santa Barbara, California. The project falls under NAICS code 238220, with a response deadline set for November 16, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 4 hours ago

DEADLINE

HVAC & Ventilation ServicesThis subcontract for HVAC and Ventilation Services involves the cleaning and maintenance of shipboard air handling and ventilation systems for prime contractors working on USCG vessel projects. The scope of work specifically includes the cleaning and inspection of HVAC system ducting as well as Engine Room supply and exhaust fan assemblies to ensure the delivery of fully operational systems. The project is managed under the Department of Homeland Security via agency CG-SEA-C21 and is categorized under NAICS code 238220. Performance of the services will take place in Santa Barbara, California. Interested parties must submit their responses by the deadline of November 16, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 4 hours ago

DEADLINE

Marine Electrical & Systems TestingThis subcontract for Marine Electrical and Systems Testing supports prime contractors on USCG vessel projects under the Department of Homeland Security. The scope of work involves performing diagnostic testing and renewal of electrical distribution and navigation systems, specifically focusing on thermographic inspections of Electrical Power Distribution Systems and the renewal of Speed Log skin valves and Fathometer Transducers. The contractor is responsible for delivering detailed thermographic reports and the successful installation of all renewed components. The project is categorized under NAICS code 238210 and will be performed in Santa Barbara, California. Interested parties must adhere to the response deadline of November 16, 2026, for this opportunity managed by the CG-SEA-C21 agency.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 4 hours ago

DEADLINE

Marine Propulsion & Shafting SpecialistThis subcontract opportunity, titled Marine Propulsion and Shafting Specialist, is issued by the Department of Homeland Security under agency CG-SEA-C21. The project involves providing specialized technical services for USCG vessel projects, specifically focusing on the removal, renewal, and alignment of propulsion trains for prime contractors. The scope of work includes the renewal of main diesel engines, alignment of main engine and reduction gear, and the renewal of propulsion shaft bearings, carriers, shafts, propellers, and rudder assemblies to deliver a fully installed and aligned propulsion system. The performance of this contract will take place in Santa Barbara, California, under NAICS code 336611. Interested parties should note that the solicitation was posted on October 22, 2026, with a response deadline set for November 16, 2026.

Ship Building and Repairing

POSTED

about 4 hours ago

DEADLINE

Marine Tank & Piping Cleaning ServicesThis subcontract opportunity, titled Marine Tank and Piping Cleaning Services, involves providing specialized industrial cleaning and inspection services for hazardous and waste tanks on USCG vessel projects. The scope of work includes the cleaning and inspection of sewage holding, grey water, oily water, dirty oil, and MP fuel service tanks, as well as the flushing of associated sewage and grey water piping. The primary objective is to deliver fully cleaned, inspected, and certified tanks and piping to prime contractors. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated for performance in Santa Barbara, California. The project falls under NAICS code 562910. Interested parties must submit their responses by the deadline of November 16, 2026.

Remediation Services

POSTED

about 4 hours ago

DEADLINE

Marine Coating & Preservation ServicesThe Marine Coating and Preservation Services subcontract involves providing specialized surface preparation and the application of protective coatings for prime contractors working on USCG vessel projects. The scope of work focuses on the preservation of critical areas, including the underwater body, hull plating freeboard, exterior main decks, superstructure, masts, and stern tube interior surfaces, ensuring all deliverables meet strict USCG specifications. Managed by the Department of Homeland Security under agency CG-SEA-C21, the project will be performed in Santa Barbara, California. The solicitation was posted on October 22, 2026, with a response deadline of November 16, 2026. This opportunity falls under NAICS code 238130.

Framing Contractors

POSTED

about 4 hours ago

DEADLINE

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing (NDT) Services involves providing specialized hull and structural inspections for prime contractors working on USCG vessel projects. The scope of work focuses on conducting ultrasonic thickness measurements and side-scan ultrasonic testing of hull plating to ensure structural integrity. The selected provider will be responsible for delivering comprehensive thickness measurement data and detailed inspection reports. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated for performance in Santa Barbara, California. The opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

USCGC BLACKFIN (WPB 87317) DRYDOCK FY27

Solicitation # 70ZU0127PBPLBLACKFIN

The Department of Homeland Security, through the U.S. Coast Guard Surface Forces Logistics Center in Norfolk, Virginia, has issued a Sources Sought Notice for the FY27 drydock and dockside repairs of the USCGC BLACKFIN (WPB 87317). This notice is intended for market research purposes to identify capable sources, determine the availability of suitable commercial items, and analyze commercial practices to inform future competition and set-aside decisions. The scope of work requires the contractor to provide all necessary personnel, equipment, materials, and facilities to perform repairs at the contractor's own facility, with no geographical restrictions. Key tasks include thermographic inspections of the electrical power distribution system and the cleaning and inspection of various tanks, including dirty oil, oily water, fuel service, grey water, and sewage holding tanks. The anticipated period of performance is six calendar days, with a projected start date of November 1st and an end date of July 1st, though these dates remain subject to government discretion. The applicable NAICS code is 336611 for Ship Building and Repairing, with a size standard of 1,300 employees. Interested parties must be registered in the System for Award Management and are requested to submit their company details, business size, certification documentation, a statement of proposal submission, and past performance evidence by November 16, 2026. Responses should be directed to Michael R. Farris and Eddrian B. Logan. This notice does not constitute a formal solicitation or a commitment by the government to award a contract.

Ship Building and Repairing

POSTED

about 4 hours ago

DEADLINE

Fuel Tank Visual Inspection and Systems CertificationThis small business set-aside subcontract, managed by the Department of Homeland Security for the U.S. Coast Guard, involves providing detailed visual inspections and systems certification for fuel tanks on vessel projects in Corpus Christi, Texas. The selected contractor will be responsible for verifying the structural integrity of bulkheads, floor, and overhead plating, as well as ensuring the proper seating of gaskets. Additionally, the scope includes testing vent check valves and tank level indicators, which must be performed in the presence of a Coast Guard Inspector. To ensure compliance and quality, the contractor is required to implement a formal Quality Control Program. The primary deliverables for this engagement consist of comprehensive structural inspection reports and official operational certifications. Interested parties must respond by October 27, 2026, under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

Diesel Fuel Tank Cleaning and Hazardous Waste DisposalThis subcontract, issued by the Department of Homeland Security for the U.S. Coast Guard, involves the removal of contaminated diesel fuel and the deep cleaning of interior tank surfaces for vessel projects in Corpus Christi, Texas. The scope of work includes the extraction of 1,400 gallons of contaminated fuel from two service tanks, the removal of sludge, rust, sediment, and biological growth, and the installation of SAE AMS C6183 compliant gaskets. The selected contractor is responsible for providing legal disposal of all hazardous waste along with comprehensive chain of custody and certified disposal records. This opportunity is designated as a Total Small Business Set Aside under NAICS code 562910, with a response deadline of October 27, 2026.

Remediation Services

POSTED

DEADLINE

CGC MANTA – FUEL TANK CLEANING

Solicitation # 52000QR270000177

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotations for the cleaning and inspection of two 1,450-gallon diesel fuel service tanks aboard the CGC Manta, located in Corpus Christi, Texas. This total small business set-aside is being processed under FAR Part 12 and FAR 13 using simplified acquisition procedures. The selected contractor will be awarded a firm-fixed price purchase order based on the best value to the government. The required period of performance is from November 1 to November 30, 2026, with the actual work duration not to exceed five days from the date of award. The scope of work includes the removal and legal disposal of 1,400 gallons of contaminated diesel fuel, cleaning interior tank surfaces of all sediment and biological growth, and performing detailed visual inspections of structural conditions and coatings. Key requirements include the use of SAE AMS C6183 compliant gaskets, the maintenance of a detailed plug log, and the provision of a complete chain of custody record for all waste. Contractors must demonstrate the satisfactory operation of tank level indicators and vent check valves in the presence of a Coast Guard Inspector. Interested vendors must be registered in SAM.gov and submit a detailed cost breakdown, including unit and total pricing, by October 27, 2026, at 1 PM EST.

All Other Miscellaneous Waste Management Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS