Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Marine Structural Door Fabrication and Assembly

Active

Federal

Response Deadline11/16/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and assembly of 19 exterior left-hand metal marine structural doors for the DLA Weapons Support Fluid Handling Division. The scope of work requires strict adherence to TDP Rev D Gen 4 specifications, including the integration of hinges, hasps, and dog assemblies, as well as the installation of CRES label plates and stainless steel grab handles. To be eligible, contractors must maintain CMMC Level 2, SAE AS9003 or ISO 9001, and JCP certifications to handle ITAR and EAR regulated data. The project is categorized under NAICS code 332322, with a response deadline set for November 16, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332322 - Sheet Metal Work Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-2149.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

20--DOOR,METAL,MARINE STRU

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and assembles exterior left-hand metal marine structural doors for prime contractors on DLA Weapons Support Fluid Handling Division projects. Performs fabrication per TDP Rev D Gen 4, integrating dog assemblies, hinges, and hasps. Installs stainless steel grab handles and CRES label plates. Requires CMMC Level 2, SAE AS9003 or ISO 9001, and JCP certification for ITAR/EAR data. Delivers 19 completed door assemblies.

Similar Contracts

Same NAICS industry code

seeking Small Businesses to supply products and services in support of our USAF Noise Suppressor Sustainment Contract

Solicitation # seeking-small-businesses-supply-products-services-support-our-usaf-noise-suppressor-sustainment

Vital Link Inc. is seeking small businesses across all socioeconomic categories to serve as subcontractors providing products and services in support of the USAF Noise Suppressor Sustainment Contract. The scope of work involves the supply of raw materials, hardware, and onsite services necessary for the sustainment of noise suppressors and related infrastructure. Key requirements include stainless and carbon steel in various forms, PLC electronic components, motors, gearboxes, insulation, sealants, sheet metal, machined parts, concrete, painting, and structural steel support, as well as freight, crating, and packaging services. Interested small businesses should align with NAICS codes 335999, 238320, 325520, 332722, 332999, and 332322. For freight and packaging, businesses are considered small if they have fewer than 500 employees. The response deadline for this solicitation is December 31, 2026. Primary points of contact for this opportunity include Ashley Barry, Ashley Aguilar, and A.C. Kujawa. Vital Link Inc. is identified by Cage Code OZV99 and SAMS/DUNS number 789317120.

Vital Link Inc.

POSTED

about 1 hour ago

DEADLINE

in about 2 months

Precision Fabrication of Angle Brackets (NSN 5340-01-185-4560)This subcontract involves the precision fabrication of 497 angle brackets for the DLA Weapons Support Land Supply Chain. The manufacturer must produce the parts according to drawing 78286 SS1048 using traditional subtractive or formative methods, such as CNC milling, stamping, or bending, while strictly avoiding additive manufacturing processes. To be eligible, contractors must be JCP certified for technical data access and maintain compliance with ITAR/EAR regulations and either SAE AS9003 or ISO 9001 quality standards. The project is associated with NAICS code 332322 and specifies a place of performance in Cherry Point.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Supply of E7 Window Assembly (NSN 1680-01-617-0785)This subcontract involves the manufacture or sourcing of one E7 Window Assembly, identified by NSN 1680-01-617-0785 and Part Number 5212400-100, for prime contractors working on Department of Defense projects. The project is managed by the Pa DLA Aviation At Philadelphia and falls under NAICS code 332322. All packaging must be performed in strict accordance with MIL-STD-2073 standards. To be eligible, the provider must maintain NIST SP 800-171 cybersecurity compliance and provide certification regarding the Buy American and Trade Agreements Act. The solicitation was posted on November 4, 2026, with a response deadline of November 16, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 6 hours ago

DEADLINE

Fabrication of Structural Aluminum Panel (NSN 1560-01-735-5849)This subcontract involves the precision fabrication and supply of one structural aluminum panel (NSN 1560-01-735-5849) for prime contractors supporting DLA/NAVSUP WSS aerospace projects. The work must be performed to Critical Safety Item standards, with strict adherence to MIL-STD-129 for container marking and MIL-STD-2073 for packaging. The project is managed under the Department of the Navy via the Pa DLA Aviation office in Philadelphia. Eligible providers must ensure full compliance with DFARS 252.204-7012 cybersecurity requirements and provide Buy American certification. The final deliverable is a single, fully inspected, marked, and packaged aluminum panel. The response deadline for this opportunity is December 4, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Traffic Sign and Blank SupplyThis subcontract for Traffic Sign and Blank Supply involves the fabrication and delivery of traffic signs and unprinted sign blanks for prime contractors working on Ada County Highway District projects. The scope of work requires the use of .080-inch or .100-inch-thick aluminum with radius corners and the application of Type IV or higher retro-reflective sheeting. All products must strictly adhere to MUTCD requirements and ACHD standard drawings to ensure safety and regulatory compliance. Managed by the Traffic Operations agency in Idaho, this opportunity is categorized under NAICS code 332322. The solicitation was posted on November 3, 2026, with a response deadline set for November 18, 2026. Interested parties can find further details and submission guidelines through the provided procurement portal.

Traffic Operations

POSTED

DEADLINE

Supply of Accessories Stowage Boxes (NSN 2540016302065)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt, requires the supply of five specialized accessories stowage boxes meeting NSN 2540016302065 specifications. The contractor is responsible for manufacturing or sourcing the units and ensuring strict adherence to military standards, including marking per MIL-STD-129, packaging per MIL-STD-2073-1E, and palletization per RP001. A Certificate of Conformance must be provided for all delivered items to ensure quality and compliance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332322. Interested parties must respond by November 18, 2026, following the posting date of November 3, 2026. This contract supports prime contractors delivering essential supply components to the Defense Logistics Agency.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Fire Extinguisher BracketsThis subcontract involves the supply of 89 specialized fire extinguisher mounting brackets for prime contractors supporting DLA Troop Support. The hardware must strictly adhere to the specifications of NSN 4210013913241 and meet all DLA quality standards and destination inspection requirements. The contract is managed under NAICS code 332322 for the Department of Defense, with the place of performance located in Barstow, California. All units must be delivered to the Barstow Central Receiving Warehouse by the specified delivery date.

BARSTOW CENTRAL RECEIVING WHSE

POSTED

DEADLINE

Supply of Hand Files (NSN 5110-00-242-5386)This subcontract, issued by the DLA DIST SAN JOAQUIN under the Department of Defense, requires the supply of 12,000 units of hand files for prime contractors. The contractor is responsible for manufacturing or sourcing files that strictly conform to Basic Drawing NR 14153 NFES1059-IPD-002425386. Key technical requirements include ensuring that cutting surfaces are hardened to a uniform level and remain free from decarburization, with each item clearly marked with its country of origin through etching or engraving. The contract is designated as a Total Small Business Set-Aside under NAICS code 332322 and mandates full compliance with the Buy American Act and DFARS 252.225-7059. Performance will take place in the 95304-5000 zip code area. Interested parties must have responded by the deadline of November 9, 2026, to provide the required 1,000 dozen hand files.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Metal Sheets (NSN 9535008180871)This subcontract involves the manufacture or procurement of 36 specialized metal sheets meeting NSN 9535008180871 specifications for prime contractors supporting DLA Troop Support. The selected provider must ensure all products adhere to the provided Technical Data Package and include necessary Metal Certifications via CDRLs and DD Form 1423s. Additionally, all items must be palletized and packaged in strict accordance with RP001 DLA Packaging Requirements. Managed by Construction & Equipment MRO SVC I for the Department of Defense, the performance of this contract is centered at Tinker AFB. The opportunity is categorized under NAICS code 332322, with a response deadline set for November 16, 2026. The final delivery consists of the 36 compliant metal sheets along with all required material certifications and standardized packaging.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE7M3-27-T-0820

Solicitation SPE7M3-27-T-0820 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 12 copper alloy tube elbows. The required items are 45-degree elbows with a 2-1/8 inch outer diameter tube size, both ends socket, and a 0.070 inch wall thickness, identified by NSN 4730-00-878-3204 and McMaster-Carr part number 5520K56. The delivery is required within 20 days after receipt of the order, with an original required delivery date of October 30, 2026. Shipping is FOB Origin to Hill AFB, Utah, and must be sent via the fastest traceable means, excluding parcel post. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Palletization must follow RP001 guidelines. Inspection and acceptance will occur at the destination. The acquisition falls under NAICS code 332322 and incorporates various FAR and DFARS clauses, including the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and the prohibition of covered defense telecommunications equipment. Invoicing must be processed electronically through Wide Area WorkFlow. Quotations are due by November 16, 2026, and a HUBZone price evaluation preference may be applied during the award process.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

GSA-Approved Security Hardware SupplyThis small business set-aside subcontract involves the procurement and delivery of GSA-approved security hardware for prime contractors working on projects at the Naval Air Warfare Center Weapons CT facility. The scope of work specifically requires the supply of LKM10K Type IV security doors, X-10 combination locks, and Hirsch 8336ABTR000 uTrust TS ScrambleProx readers. The selected provider is responsible for verifying all GSA approvals and submitting necessary Country of Origin documentation. This Department of Defense requirement falls under NAICS code 332322, with a response deadline set for November 17, 2026.

Naval Air Warfare Center

POSTED

DEADLINE

A-Frame Sign Holder SupplierThis subcontract agreement establishes the supply of six commercial-grade, heavy-duty A-frame sign holders intended for use on Hawaii Fire Department ocean safety projects. These portable outdoor frames are specifically designed for beach environments and feature dimensions of 25 inches wide, 45 inches high, and 3 inches deep. The procurement is categorized under NAICS code 332322 and is managed through the Hawaii Fire Department. Interested parties should note the posting date of November 2, 2026, with a response deadline set for November 7, 2026.

Hawaii Fire Department

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Production Lot Testing and Quality ValidationThis subcontract for the Department of Defense DLA Weapons Support Fluid Handling Division involves performing production lot testing and quality validation for CUNI pipe flanges. The selected contractor will coordinate random sample selection with the Government QAR and execute tests according to the Technical Data Package to ensure quality conformance. Key deliverables include the preparation of DD Form 1222 and detailed certified test reports. The project is based in New Cumberland and falls under NAICS code 541380. Due to the handling of export-controlled technical data, the contractor must maintain CMMC Level 2 and JCP certifications. Interested parties must respond by November 16, 2026.

Testing Laboratories and Services

POSTED

about 1 hour ago

DEADLINE

Precision CUNI Pipe Flange ManufacturingThis subcontract involves the precision manufacturing of six 90/10 Copper-Nickel pipe flanges for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the fabrication of 2-1/2 inch nominal pipe size, socket-weld, 250 lb/psi class flanges in strict accordance with Basic Drawing NR 80064 4715319 Rev E. Additionally, the manufacturer must perform spot facing and alternate back facing as specified by MSS SP-9 and MIL-PRF-20042. To be eligible for this project, the contractor must maintain CMMC Level 2, JCP certification, and ISO 9001 quality standards. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, regarding this Department of Defense requirement under NAICS code 332996.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

Marine Door Dog Supplier (NSN 2040017222053)This subcontract involves the manufacture or sourcing of one Marine Door Dog under NSN 204001722053 for prime contractors supporting DLA supply contracts for the USS HARRISBURG LPD-30. The supplier must ensure all hardware complies with DLA Technical and Quality Requirements RA001 and RP001, with packaging and labeling adhering to MIL-STD-129 and ASTM D3951 standards. All materials used must be compliant with the Buy American Act and the Berry Amendment, with final delivery conducted FOB Origin. Managed by the DLA Weapons Support Fluid Handling Division of the Department of Defense, the project falls under NAICS code 332999. The place of performance is located in Pascagoula, Mississippi. Interested parties must respond by November 16, 2026, following the posting date of November 4, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging and Preservation for Aerospace ComponentsThis subcontract involves providing specialized military-grade packaging and preservation services for critical aerospace gaskets on behalf of prime contractors for the DLA Weapons Support Fluid Handling Division. The scope of work requires strict adherence to MIL-STD-2073-1E standards, utilizing MIL-DTL-117 medium duty bags that are waterproof, greaseproof, opaque, and UV-protected. Additionally, all packages must be marked according to MIL-STD-129 to ensure they are fully prepared for FOB Origin shipment. The project is categorized under NAICS code 561910 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this specific procurement effort.

Packaging and Labeling Services

POSTED

about 1 hour ago

DEADLINE

Manufacturing of Aerospace Gaskets (P&W Part 3039937)This subcontract involves the precision manufacturing of 81 aerospace gaskets for the DLA Weapons Support Fluid Handling Division. The components must be fabricated from elastomer or composite materials in strict accordance with NSN 5330015423088 and Pratt & Whitney Canada Corp part number 3039937. Due to the critical nature of the application, the manufacturer must implement rigorous quality control systems capable of zero-based sampling to ensure total adherence to quality standards. Compliance requirements for this project include a CMMC Level 2 self-assessment and full adherence to the Buy American Act. The work is categorized under NAICS code 339999 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 1 hour ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-Q-0118

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

PANEL, VEHICULAR OPERAT

Solicitation # SPE7M4-27-T-2150

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7M4-27-T-2151

Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

COUPLING HALF, QUICK DI

Solicitation # SPE7M3-27-T-0839

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7M3-27-T-0838

This fixed-price solicitation, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of six pipe flanges (NSN 4730-01-463-6020) with a required delivery date of October 31, 2027. The contract is designated as a small business set-aside and includes a requirement for Production Lot Testing to validate quality conformance following first article approval. Delivery is set for New Cumberland, Pennsylvania, with inspection and acceptance occurring at the origin. The manufacturer must maintain an inspection system compliant with SAE AS9003 or ISO 9001. The contract imposes stringent regulatory and security requirements, including CMMC Level 2 certification and compliance with NIST SP 800-171 for safeguarding covered defense information. Technical data is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Packaging and marking must adhere to RP001 and MIL-STD-129, and the Buy American Act applies to all quotes above the micro-purchase threshold. Invoicing is managed electronically through the Wide Area WorkFlow system. Offers utilizing additive manufacturing are ineligible for award unless specifically authorized.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7M4-27-T-2148

Solicitation SPE7M4-27-T-2148 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of gaskets, identified as NSN 5330015423088 and Pratt & Whitney Canada Corp part number 3039937. This is a critical application item with a total requirement of 81 units, split between two line items of 32 and 49 units. Delivery is required within 167 days after the order is placed, with an original required delivery date of February 21, 2027, and a need ship date of May 3, 2027. The items are to be delivered FOB Origin to facilities in New Cumberland, Pennsylvania, and Tracy, California. The contract mandates strict quality and packaging standards, including the use of medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Compliance requirements include CMMC Level 2 self-assessment, adherence to the Buy American Act, and marking in accordance with MIL-STD-129. While the material is determined to be non-hazardous, the contractor must still comply with general hazard warning label requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7M4-27-T-2152

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Metal Strip Manufacturer/Supplier (NSN 9515-00-240-8917)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Mounting Brackets (NSN 5340015028669)

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Precision Shim Manufacturing (NSN 5365011873879)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-6722

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 23 hours

Watertight Closure Maintenance

POSTED

DEADLINE

in about 1 year

Build-to-print Protective Enclosure Assembly

Solicitation # N6660427Q0057

Nuwc Division Newport

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS