Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MARLINE

Active
SPE8E9-26-T-3289Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract under the MARLINE designation issued by the Navy through DLA mandates the supply of 230 coils of material, each weighing 20 pounds, identified by NSN 4020-00-240-2185 and purchase request 7017757212, meeting Type 4, Class 1 specifications. The material must be packaged in snug-fitting weather-resistant fiberboard boxes compliant with ASTM D5118, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except in specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents as authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The jute material replaces hemp in packaging, and the minimum breaking strength is reduced to 140 lbs instead of 175 lbs, with ASTM-D681 permissible for tar content determination. Source inspection is required if the vendor has not supplied this item within the past three years, and inspection and acceptance occur at the destination point. Delivery is scheduled to occur within 525 days from the contract award, with delivery terms set at FOB Origin and no variation allowed in quantity. The shipment must be sent to the designated receiving warehouse in Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all R and I-numbered specifications, with the applicable revision determined by the solicitation or award date depending on acquisition size. The material specification T-R-650 Revision A Gen 1 applies, with all packaging and handling instructions aligned to DLA’s procurement standards. The contract was solicited on August 5, 2026, with responses due by August 17, 2026, and performance is managed under NAICS code 314994 by the Department of Defense, with Matthew Kruc as the primary point of contact.

General Info

Supply 230 coils of 20-lb material per NSN 4020-00-240-2185, FOB Origin, deliver to Tracy, CA within 525 days, compliant with MIL-STD and no mercury except authorized uses.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

314994 - Rope, Cordage, Twine, Tire Cord, and Tire Fabric MillsView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE8E9-26-T-3289.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUS
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MARLINE
MARLINE, NAVY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 CL = 20 LB
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FOR ACQUSISTION REQUIREMENTS SEE PARA 6.2 OF
ACQUISITION SPECIFICATION
(A) T-R-650, DTD 21 DEC 1967,AMEND 1,19 MAY 1969
(B) TYPE 4,CLASS 1
(C) AS SPECIFIED
(D) AS SEPCIFIED
(E) PUT UP: 20 POUND COIL
(F) SEE PACKAGING DATA
(G) AS SPECIFIED
(H) AS SPECIFIED (I) SPEC DESIGNATION NAVY
SPECIFICATION APPLIES EXCEPT MATERIAL SHALL BE
JUTE IN LIEU OF HEMP AND THE MINIMUM BREAKING
STRENGTH 140 LBS IN LIEU OF 175 LBS
ASTM-D681 MAY BE USED TO DETERINE TAR CONTENT
I/L/O FED-STD-191 METHOD 2611.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Source Inspection Required If OEM/Vendor has not supplied item in 3 years.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC UNK T-R-650(1) NOT 2 REVISION NR DTD 02/13/2023
SPE8E9-26-T-3289
SECTION B
PART PIECE NUMBER: TYPE 4, CLASS 1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757212 0001 CL 230.000
NSN/MATERIAL:4020002402185
DELIVERY (IN DAYS):0525
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE INDIVIDUAL UNITS IN SNUG FITTING FIBERBOARD BOX CONFORMING TO ASTM D5118, CLASS WEATHER RESISTANT. TYPE, VARIETY, AND GRADE OF FIBERBOARD BOX IS AT OPTION OF SUPPLIER.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE8E9-26-T-3289
SECTION B
PR: 7017757212 PRLI: 0001 CONT’D
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/25/2028 Original Required Delivery Date:01/29/2028
SPE8E9-26-T-3289 NSN/Part Number: 4020-00-240-2185 Quantity: 230 CL Purchase Request: 7017757212QTY: 230 Delivery: 525 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8EE-26-T-2229
This contract specifies the procurement of fibrous, plaited rope meeting MIL-DTL-24537A standards, with a circumference of 1.5 inches, supplied in 400-foot reels totaling 38 reels. The rope is classified as a critical item requiring source inspection and must be sourced exclusively from manufacturers or distributors listed on the Qualified Suppliers List for Manufacturers/Distributors (QSLM/QSLD) under FSC 4020; any deviation from this requirement renders a bid noncompliant and may result in criminal penalties. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the product must conform to specific packaging standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Mercury or mercury-containing compounds are strictly prohibited except for defined exceptions such as batteries, fluorescent lights, and authorized instruments, with portable devices containing mercury needing shock-proof design and secondary containment per NAVSEA 5100-003D. The quality assurance protocol EQ003 applies, and for QSL-compliant suppliers, additional inspection requirements such as COQC, PVT, and ASQ H1331 are waived. Delivery is FOB origin to the recipient warehouse in Tracy, California, with a 57-day delivery window and a required ship date of August 11, 2025, despite the original delivery date being listed as December 8, 2026. The contract enforces a zero percent quantity variance, with inspection and acceptance occurring at destination, and transportation procedures are governed by DLA Procurement Notes C19 and C20.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
TAPE, LACING AND TYING
Solicitation # SPE8EE-26-T-2253
The contract pertains to the procurement of tape, lacing, and tying products identified by part number AA52084-F-2-NATURAL and NSN 4020-01-397-6501, with a total quantity of 2,500 feet to be delivered in spools of 250 yards each. The product must comply with Commercial Item Description A-A-52084B, with a specific modification that the denominator in the formula referenced in section 5.2.1 must be "A" instead of "B". It is classified as a commercial item and is subject to the Qualified Suppliers List for Manufacturers and Distributors (QSLM/QSLD) under FSC 4020, meaning only suppliers listed on the DLA’s approved QSLM/QSLD are eligible to bid; any deviation from this requirement must be explicitly disclosed and may result in rejection. The government waives source inspection requirements for qualified suppliers under this solicitation, and quality conformance inspections referenced in other clauses do not apply. Packaging must meet ASTM D3951 standards unless superseded by DLA Master List technical requirements, and all markings and labeling must follow MIL-STD-129 with palletization per RP001 guidelines. Delivery is required FOB origin within 167 days of contract award, with a target ship date of February 1, 2027, and an original required delivery date of December 30, 2026. The quantity allowable variance is ±10%, and inspection and acceptance occur at the destination. The designated delivery point is DLA Distribution Depot Hill at Hill AFB, Utah, with specific shipping and parcel post addresses provided. The product must be packaged and labeled precisely as specified, and any noncompliance—such as sourcing from unapproved suppliers or improper packaging—is considered an unauthorized substitution and may lead to criminal penalties in addition to civil remedies. The solicitation number is SPE8EE-26-T-2253, with a response deadline of August 17, 2026, and the primary point of contact is Philip Ferrara at DLA. The unit of issue is feet, as standardized by DoD guidelines, and all terms are governed by applicable DLA procurement notes and directives.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
TAPE, LACING AND TYING
Solicitation # SPE8EE-26-T-2217
This contract is for the procurement of tape, lacing, and tying materials specified under Commercial Item Description A-A-52084B with part number AA52084-A-3 in natural color, furnished in 1,500-foot rolls, with a total quantity of 37 rolls. The product must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific modifications such as adjusting the denominator in Formula 5.2.1 from “B” to “A.” The supply is subject to strict prohibitions against intentional addition or direct contact with mercury or mercury-containing compounds, except for recognized functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navy-specified chemical reagents; portable mercury-containing devices must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Only manufacturers and distributors listed on the Qualified Suppliers List for Manufacturers (QSLM) and Qualified Suppliers List for Distributors (QSLD) for FSC 4020 are eligible to bid, and deviations from this requirement must be explicitly declared; non-compliant offers are considered exceptions and may lead to criminal penalties if delivered. Source inspection requirements are waived for qualified QSLM/QSLD suppliers, and quality conformance inspections referenced in the contract do not apply. Packaging must adhere to MIL-STD-2073-1E, marking must follow MIL-STD-129 with no special marking codes, and delivery is FOB origin to Hill AFB, Utah, with a required delivery date of February 1, 2027, after a 167-day lead time. Quantity tolerance is zero percent variance. The contract number is SPE8EE-26-T-2217, the NSN is 4020-00-001-9358, and the unit price is $37.00 per roll.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
HELI-VAC FAST ROPE
Solicitation # SPE8EE-26-T-2248
The contract pertains to the procurement of HELI-VAC FAST ROPE, identified by NSN 4020-01-500-5779 and part number 3336678 from PLYMKRAFT, INC., with a total quantity of three boxes, each containing four units. The purchase is solicited under contract number SPE8EE-26-T-2248 as a Women-Owned Small Business Set-Aside, with a required delivery date of February 8, 2027, and a delivery lead time of 167 days. All items must be packaged in compliance with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements, referenced via R and I numbers, take precedence over any ASTM standards. Packaging and labeling must conform to MIL-STD-129, with palletization strictly following DLA’s RP001 packaging guidelines. The unit of issue is BX, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Delivery is FOB origin, and all shipments must be sent to the specified DLA distribution facility in New Cumberland, Pennsylvania. The contract enforces strict compliance with government identification removal protocols for non-accepted supplies and includes controlled defense information considerations. The required ship date is February 1, 2027, and transportation protocols are governed by DLAD Proc Notes C19 and C20.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
HELI-VAC FAST ROPE
Solicitation # SPE8EE-26-T-2260
The contract is for the procurement of HELI-VAC FAST ROPE under solicitation SPE8EE-26-T-2260, a Women-Owned Small Business Set-Aside, with a required delivery date of January 4, 2027, and a need ship date of February 1, 2027. The item, identified by NSN 4020-01-500-5765 and part number 3336680 from PLYMKRAFT, INC., is designated as a Critical Application Item and must be delivered in lots of two boxes, with each box containing eight units. Delivery is FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all labeling and marking must follow MIL-STD-129. Palletization and packaging must adhere to RP001: DLA Packaging Requirements for Procurement, and the Unit of Issue and Quantity per Unit Pack are specified as BX and 8 EA respectively. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, and transportation must comply with DLAD Proc Note C19 and C20. The contract enforces strict compliance with government standards for covered defense information and requires removal of government identification from non-accepted supplies. The procurement is managed by the Department of Defense, with Philip Ferrara as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
TAPE, LACING AND TYING
Solicitation # SPE8E9-26-T-3295
The contract specifies the procurement of black tape, lacing, and tying item with part number P/N 52081-B-3-BLACK and NSN 4020004480290, to be supplied in compliance with Commercial Item Description A-A-52081B, with a clarification that the denominator in the formula in paragraph 5.2.1 must be “A” instead of “B.” Each spool contains 500 yards and the total order quantity is 123 units to be delivered FOB origin within 101 days, with no variance allowed in quantity. The product is designated as a commercial item and must meet all applicable DLA Master List of Technical and Quality Requirements, which take precedence over other standards. Strict provisions prohibit the intentional inclusion of mercury or mercury-containing compounds except in specified exceptions like batteries, fluorescent lights, sensors, and authorized chemical reagents; portable devices containing mercury must be shockproof and have a secondary containment. Only manufacturers and distributors listed on the Qualified Suppliers List for Manufacturers (QSLM) and Qualified Suppliers List for Distributors (QSLD) for FSC 4020 are eligible; failure to use an approved supplier constitutes a material deviation and may lead to criminal penalties. Source inspection requirements are waived for qualified suppliers under this solicitation, and compliance with the QSL program is mandatory unless explicitly authorized in writing by the government. Packaging must conform to ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA packaging guidelines. Delivery is to be made to DLA Distribution Depot Oklahoma at Tinker AFB, with a required ship date of November 27, 2026, and original delivery date of December 20, 2026. The contract is issued under solicitation SPE8E9-26-T-3295 and falls under NAICS code 314994.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
ROPE, NYLON DOUBLE-BRAI
Solicitation # SPE8EE-26-T-2237
The contract specifies the procurement of 57 units of nylon double-braided rope with part number 4020-01-283-6187 under solicitation SPE8EE-26-T-2237, with a unit price of $57.00 and a total contract value of $3,249. Delivery is required FOB origin within 167 days of the contract award, with mandatory acceptance at the destination and zero variance allowed in quantity. The rope must be packaged in accordance with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements take precedence, and all packaging and labeling must comply with MIL-STD-129. Palletization must adhere to RP001 DLA packaging standards. The product is subject to Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and covered defense information requirements apply. Delivery is targeted for February 1, 2027, though the original required delivery date was December 19, 2026. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation details are governed by DLAD procedural notes C19 and C20. The contract is open for full and open competition, and the unit of issue is each (EA). Technical specifications referenced include drawing NR 80091, revision F, and all applicable military standards supersede any other guidelines.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8E9-26-T-3299
The contract pertains to the procurement of fibrous rope, specifically cotton or cotton and polyester, with a required circumference of 3/4 inch and a put-up of 1,600 feet per tube, identified by NSN 4020-00-247-9224. A total of 117 tubes are required, with delivery due in 167 days FOB origin, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and labeling in accordance with MIL-STD-129, with no special marking required. The purchase request number is 7017757346, and the solicitation number is SPE8E9-26-T-3299, with a response deadline of August 17, 2026, and a required ship date of February 1, 2027, and original delivery date of February 16, 2027. Only manufacturers and distributors listed on the Qualified Suppliers List for Manufacturers (QSLM) and Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, as mandated by DLA Troop Support procedures effective July 1997. Any offer not based on an approved supplier is considered a deviation and must be explicitly noted. Compliance with the QSL program is compulsory unless otherwise authorized in writing by the government; failure to comply may result in criminal penalties. Source inspection requirements are waived for contracts awarded to qualified suppliers, and quality conformance is governed by the applicable DLA technical and quality requirements referenced in the DLA Master List, including T-R-571E, Revision E dated March 13, 1990. Delivery must be made to DLA Distribution San Diego at the specified address, with transportation rules governed by DLA procurement notes C19 and C20.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8EE-26-T-2226
The contract specifies the procurement of double-braided nylon rope meeting MIL-DTL-24050E or the current issue of DODISS, with a circumference of 4 inches and a nominal continuous length of 900 feet per reel, totaling 6 reels for delivery. Each reel must weigh 410 pounds net and be packaged as a single continuous length with no multiple lengths per unit, adhering to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. Supply must comply strictly with the Qualified Suppliers List for Manufacturers and Distributors, and only approved suppliers listed on the QSLM/QSLD are eligible for award; deviations or use of non-approved sources will be considered unauthorized substitutions with potential criminal penalties. Mercury or mercury-containing compounds are prohibited in direct contact with the rope except for specific exempted applications, and portable mercury-containing devices must include secondary containment. Inspection and acceptance occur at the destination, with no variance allowed in quantity, and delivery must be FOB origin within 167 days. The rope is priced on a per-pound net weight basis, with the full contract governed by DLA packaging, quality, and procurement guidelines, including waiver of source inspection for QSL-compliant suppliers. The delivery address is DLA Distribution San Diego, and the required delivery date is January 30, 2027, with a need ship date of February 1, 2027.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8EE-26-T-2285
Nylon plaited rope with a 3-1/2 inch circumference is being procured under solicitation SPE8EE-26-T-2285, with a total quantity of five 1200-foot reels, each reel constituting one unit of issue. The product must comply with MIL-DTL-24337B, and while the original specification called for one-ply yarn construction, three-ply yarn construction is now approved as an alternative. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization following DLA packaging requirements. Delivery is FOB destination, with a strict 20-day delivery window from the contract award, and no quantity variance is permitted. Inspection and acceptance occur at the destination, and government source inspection requirements are waived for qualified suppliers under the QSL program. Only manufacturers or distributors listed on the Qualified Suppliers List for Manufacturers or Distributors (QSLM/QSLD) for FSC 4020 are eligible to compete, and any deviation from this requirement must be explicitly declared. Supplied items must comply fully with the QSL program terms; unauthorized substitutions may result in criminal penalties. The contract is a total small business set-aside under NAICS code 314994, with response deadlines set for August 17, 2026, and delivery required no later than August 5, 2026, to the designated fleet activity in Sasebo, Japan.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
TWINE, FIBROUS
Solicitation # SPE8EE-26-T-2218
The contract specifies the procurement of 635 units of cotton seine twine, each unit consisting of 210 feet, under the NSN 4020-00-243-1554 and part number AA2917-30, aligned with Commercial Item Description A-A-2917 dated June 21, 1995, and Technical Data Package Revision A. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement. The product is to be delivered FOB origin within 167 days, with a firm delivery date of February 1, 2027, and a strict zero percent quantity variance. Inspection and acceptance occur at the destination, and all packaging must reflect the Unit of Issue and Quantity per Unit Pack as specified. The delivery address is the DLA Distribution Puget Sound facility in Bremerton, Washington, with transportation procedures governed by DLAD Proc Notes C19 and C20. Full and open competition applies, and the solicitation issued on August 5, 2026, with a response deadline of August 17, 2026, is managed by the Department of Defense under NAICS code 314994. Contact for the contract is Philip Ferrara, with email and phone provided for inquiries.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8EE-26-T-2230
The contract specifies the procurement of fibrous plaited rope meeting military specification MIL-R-24537, with a circumference of 1-1/2 inches and packaged in 200-foot reels, totaling 48 reels for delivery. All supplies must comply with DLA’s Qualified Suppliers List for Manufacturers and Distributors (QSLM/QSLD) under FSC 4020, meaning only approved suppliers are eligible for award; deviations or use of non-QSL products constitute unauthorized substitutions subject to criminal and civil penalties. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with procurement rules controlled by the revision in effect on the solicitation issue date. Mercury and mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, instruments, or weapon systems, and portable mercury-containing devices must include shock-proof construction and secondary containment as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and marking to MIL-STD-129, with delivery FOB origin to DLA Distribution San Diego by 55 days after award. Inspection occurs at destination, and for QSL-compliant offers, government quality conformance inspections and source inspection requirements are waived. The contract enforces full and open competition, with no quantity variance permitted, and requires compliance with DLA’s procurement notes regarding transportation, unit of issue, and data submission, with the response deadline set for August 17, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 332420
New
DIBBS
Small Business Subcontracting Participation
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 483110
New
DIBBS
Transportation of Supplies by Sea

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332420
New
DIBBS
Fire Extinguisher Supply (NSN 4210-00-203-0217)
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339113
New
DIBBS
CARRIER ASSEMBLY
Solicitation # SPE8E9-26-Q-0643
The contract awards 202 units of the Carrier Assembly, Protective Mask, identified by NSN 4240-01-224-4196, under solicitation SPE8E9-26-Q-0643, with a firm fixed price and no variance allowed in quantity. Delivery is required within 60 days after contract award, with freight shipped from origin and acceptance occurring at destination. Packaging must comply strictly with MIL-STD-2073-1E and DLA Packaging Requirements, using specified methods for preservation, wrapping, and containment, while avoiding plastic materials whenever possible. Marking must adhere to MIL-STD-129 with no special coding required. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries or sensors, and any exempted items must meet NavSea 5100-003D standards for shock resistance and secondary containment. The item is destined for DLA Distribution at the New Cumberland facility, with transportation governed by DLAD procedural notes. The supply is critical to a Department of Defense requirement with a material need date of May 19, 2028, and technical and quality standards referenced from the DLA Master List of Requirements in effect on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
URINAL, STATIONARY
Solicitation # SPE8E9-26-T-3310
The contract is for 78 stationary urinals with part numbers 5672 and U5672, manufactured by Anchor Fabricators Inc. in Clayton, OH, and is identified by NSN 4510-00-691-3979. The items must be color white and comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which are incorporated by full text. Packaging must meet DLA packaging specifications, and any non-accepted supplies must have government identification removed before return. The solicitation number is SPE8E9-26-T-3310, issued under a Women-Owned Small Business Set-Aside, with a NAICS code of 332913. The request was made under purchase request 7017757728, and delivery is required within 187 days after order. The place of performance is Tinker Air Force Base, Oklahoma, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. Primary point of contact is Matthew Kruc of the Department of Defense, Construction & Equipment MRO SVC I.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR UNIT, REF
Solicitation # SPE8E9-26-T-3321
The contract is for the procurement of ten refrigerator compressor units identified by NSN 4130-01-090-9093 under solicitation SPE8E9-26-T-3321, issued as a total small business set-aside under NAICS code 333415. Delivery is required within 167 days of contract award, with a specific ship date of February 1, 2027, and an original required delivery date of October 30, 2027. Items must be shipped FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, requiring each unit to be individually encased in a wooden box and secured with plywood planks to prevent movement, with marking per MIL-STD-129 and no special marking codes. The delivery destination is DLA Distribution Puget Sound in Bremerton, Washington. Strict prohibitions apply regarding mercury or mercury-containing compounds, which must not be intentionally added or come into direct contact with any supplied hardware except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Transportation regulations are governed by DLAD Proc Notes C19 and C20, and the unit of issue is specified per DoD standards. The point of contact for inquiries is Matthew Kruc, with additional contract details accessible via the DIBBS system.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DU
Solicitation # SPE8E9-26-T-3360
The contract specifies the procurement of two cooling coils, air, du, identified by NSN 4130015338172 and part numbers 1262-01-D REV A and 6W8-34-5608T, under solicitation SPE8E9-26-T-3360. The quantity is fixed at two units with no variance allowed, and delivery is required within 167 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, packaging, and container specifications, and marking must adhere to MIL-STD-129 with no special marking required. All packaging and handling requirements are governed by DLA’s official packaging standards, and the shipment must be sent to the designated receiving warehouse in Tracy, California. The item is subject to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and defense information protections under RD003 may apply. The contract includes transportation guidelines referenced in DLAD Proc Notes C19 and C20, and the original required delivery date is May 18, 2027, with a need ship date of February 1, 2027. The NAICS code is 333415, and the responsible contracting office is under the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339999
New
DIBBS
DRAFTING INSTRUMENT
Solicitation # SPE8E9-26-T-3303
This contract governs the procurement of drafting instruments under NSN 6675-00-641-3531, with a quantity of 64 units, pursuant to solicitation SPE8E9-26-T-3303. The technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RP001, RQ006, and RA001, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a solicitation amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment boundary as mandated by NAVSEA 5100-003D. The product specification deviates from CID A-A-52034 in specific ways: the center horn must be a transparent plastic disc with defined diameter and tolerance, paired with a centered rubber gasket having prescribed dimensions and protrusion, and revised nomenclature replaces obsolete classifications for protractors and triangles, now correctly identifying them as semicircular protractors and triangles with specified angles and dimensions. The contract item is procured as a fully competitive commercial item under federal specification, with delivery due 167 days after award, and is managed by the Department of Defense’s Construction & Equipment MRO Service I, with performance located in New Cumberland, Pennsylvania.
All Other Miscellaneous Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3307
This procurement requires aluminum alloy sheet metal with specific dimensions of 0.012 inches thick, 48 inches wide, and 144 inches long, weighing approximately 8.304 pounds per sheet, and must be supplied in whole-foot lengths only. All material must comply with exact specifications and严禁 test coupons; non-conforming sheets will be rejected. A Certificate of Quality Compliance, or Mill-Material Certification, is mandatory for every shipment and must be included with the delivery and submitted separately to the DLA Troop Support Contracting Officer. The material must meet the technical standards referenced in the Technical Data Package, including SAE AMS-QQ-A-250B, ASTM B666/B666M-20, and ASTM B660-23, and must be of Alloy 7075 in T6 temper. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, permanent, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are required for small bars, tubes, and shapes under 0.250 inches nominal OD. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation from this requirement must be explicitly stated by the offeror. Suppliers on the QSLD are exempt from source inspection unless otherwise specified, and compliance with the QSL program is strictly enforced—failure to comply may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, including robust four-corner protection, full edge coverage, and fiberboard or superior top and bottom protection. Marking must follow MIL-STD-129, with special codes ZZ indicating preservation in accordance with ASTM B660 and marking per ASTM B666. The delivery is FOB origin, with inspection and acceptance occurring at destination, and the entire order of 98 sheets must be delivered within 167 days to Warner Robins Air Force Base, Georgia. Failure to meet any requirement, including marking, packaging, or supplier qualification, will result in rejection of the product.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
SOLDERING IRON, ELEC
Solicitation # SPE8E9-26-T-3314
The contract is for the procurement of 46 electric soldering irons with a part number of 3439-00-965-0090, specified as 200 watts with shape B tips, requiring two tips per unit. The item is not classified as hazardous and does not require a Safety Data Sheet, though the hazardous item indicator must remain unchanged. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific chemical reagents authorized by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA standards including removal of government identification and physical marking requirements. The solicitation number is SPE8E9-26-T-3314, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332216 for federal procurement administered by the Department of Defense’s Construction & Equipment MRO Service I. Deliveries are due within 167 days of award, and the place of performance is New Cumberland, PA, with Matthew Kruc listed as the primary point of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, CYLINDER ST
Solicitation # SPE8E9-26-T-3323
The contract pertains to the procurement of a BRACKET, CYLINDER ST with NSN 4210-01-141-4027 and part number 52427, supplied by TYCO FIRE PRODUCTS LP. A total of 27 units are required at a unit price of $27.00, resulting in a total contract value of $729.00. Delivery is scheduled to occur within 167 days from the contract date, with FOB origin terms and inspection and acceptance points set at the destination. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is classified as a commercial item, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation timeline. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and the shipment must comply with DLA transportation notes C19 and C20 for freight and first destination handling. The required ship date is February 1, 2027, and the original delivery deadline is April 16, 2027. The solicitation was issued under contract number SPE8E9-26-T-3323, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Construction & Equipment MRO Service I under NAICS code 333998.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details