This Sources Sought opportunity from National Aeronautics And Space Administration was posted on June 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Mass Spectrometer observing lunar operations (MSolo) Gas Analysis Instrument Concepts and Models

Closed

RFI-KSC-MSoloGasAnalysisInstrument-2026Federal

Submission Closed08/03/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336419

New

Federal

14--PANEL,STRUCTURAL,AI - AND OTHER REPLACEMENT PARTS

Solicitation # N0038326QNA74

Solicitation NO0383-26-Q-NA74, issued by NAVSUP Weapon Systems Support on August 28, 2026, is a request for quotations for the supply of structural aluminum panels and clamp assemblies. The government intends to make a single award based on the most advantageous terms, prioritizing past performance over price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System to assess item, price, and supplier risk. The required delivery timeframe is 90 days, with inspection and acceptance occurring at the origin. The contractor must adhere to strict quality control standards, maintaining a Repair Quality Plan compliant with ISO 9000, 9001, 9002, or Mil-I-45208A. Key responsibilities include maintaining detailed historical record files for each serial number, performing receiving inspections against the Technical Data Package, and submitting all failure analysis reports to the government. While the contractor is granted Internal Review Board authority for minor non-conformances, the government retains formal Material Review Board authority for as-is dispositions. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labeling and the use of approved pallets. Payment will be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

DEADLINE

RATCHET, HANDBRAKE LEVE

Solicitation # SPE4A6-27-T-7004

Solicitation SPE4A6-27-T-7004 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of 33 handbrake lever ratchets, identified by NSN 1450-00-588-6836. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of April 6, 2027, and an original required delivery date of September 25, 2027. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The contractor must adhere to strict quality and compliance standards, including CMMC Level 2 certification and adherence to the Buy American and Balance of Payments Program. Technical data is subject to ITAR or EAR export controls, requiring specific DLA authorizations and JCP certification for access. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA requirement RP001, with specific shelf-life marking code 32. Inspection and acceptance will occur at the destination, utilizing sampling plans such as MIL-STD-1916 or ASQ H1331, where acceptance generally requires zero non-conformances.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1883

Solicitation SPE7M4-27-T-1883, issued by the DLA Weapons Support Fluid Handling Division, is a small business set-aside for the procurement of one forward propeller, NSN 2010-01-137-2013. The government has designated Reinhold, CAGE 2D301, Part Number 5268342, as the only approved source of supply. The required delivery date is August 30, 2027, with a lead time of 293 days after the date of order. This fixed-price acquisition requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to cybersecurity and export control regulations, including CMMC Level 2 certification and compliance with ITAR or EAR for technical data. Packaging must follow MIL-STD-2073-1E and RP001, requiring items to be individually packaged, immobilized, and preserved against corrosion. Marking must comply with MIL-STD-129, with serial numbers obtained from NUWC Keyport and applied after balancing holes are drilled. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment, and offerors must submit their quotations by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Adapter, Hellfire Missile (Upper) and Adapter, Hellfire Missile (Lower)

Solicitation # N6833526Q1186

The Naval Air Warfare Center Aircraft Division (NAWC-AD) is soliciting quotes for a Firm Fixed Price contract to procure 20 units of Upper Hellfire Missile Adapters (Part 1517AS106-1) and 20 units of Lower Hellfire Missile Adapters (Part 1517AS107-1), along with associated technical data. These items support the AH-1Z and UH-1Y Foreign Military Sales case for the Czech Ministry of Defense. This procurement is a 100% Small Business Set-Aside under NAICS code 336419. The final deadline for submission is November 10, 2026, with all proposals required to be submitted electronically to the point of contact, Juan Carlos Belmonte. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) method. To be considered technically acceptable, offerors must be a certified small business, provide pricing for all CLINs, and commit to a delivery schedule of 90 calendar days after the award date. Due to the presence of Controlled Unclassified Information (CUI) and export-controlled technical data, offerors must provide a certified DD Form 2345 and proof of CMMC Level 2 self-assessment via the Supplier Performance Risk System (SPRS) to access the technical data packages. Additionally, the contract requires strict adherence to MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification. Shipping is quoted as FOB Origin, with hardware delivery to Gulfport, Mississippi, and technical data delivery to Joint Base MDL, New Jersey.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Simulator, Initiator Supply (P/N 811-00444)This subcontract involves the supply of Initiator Simulators, specifically part number 811-00444, to support prime contractors delivering for the DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing seven units of the simulator, identified by NSN 1670014964748, ensuring all items conform to Basic Drawing NR 81337 11-1-7298, Revision D. As part of the requirements, the provider must submit a Source Approval Request package to obtain the necessary source approval. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, falling under NAICS code 336419. Performance of the contract is designated to take place in New Cumberland. The solicitation period is open from October 26, 2026, with a response deadline set for November 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

ICBM Bulkhead Assembly

Solicitation # SPRHA2-26-R-0039

Solicitation SPRHA2-26-R-0039, issued by DLA Aviation at Ogden, is for the procurement of 40 ICBM Bulkhead Assemblies (NSN 1420-01-390-4419, Part Number 23007735G1) for the LGM-30. The government provides two bidding options: Bid A, which requires a First Article and a corresponding First Article Test Report (CDRL A001), and Bid B, which does not. The required delivery date for the full quantity is April 29, 2027, with deliveries made FOB Origin to Hill Air Force Base, Utah. While originally a total small business set-aside, Amendment 0002 dissolved this restriction and extended the response deadline to November 25, 2026. Award evaluation is primarily based on price or cost. The contract mandates strict adherence to military standards for preservation, packaging, and marking, specifically referencing MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130, with Item Unique Identification (IUID) required. Technical data is subject to strict export controls and is treated as Distribution D. Contractors must meet CMMC Level 2 self-assessment requirements and comply with DFARS 252.204-7012 for safeguarding covered defense information. Payment and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system.

Ut DLA Aviation At Ogden

POSTED

DEADLINE

HEATER, THERMAL RELEASE

Solicitation # SPE7M5-27-T-0451

Solicitation SPE7M5-27-T-0451 is a request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 24 units of Thermal Release Heaters, identified by NSN 5999-00-538-1291. The procurement falls under NAICS code 336419 and requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of June 6, 2027. Offers must be submitted via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. This acquisition is issued under the First Destination Transportation program, meaning quotes should be based on FOB Origin. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as packaging and marking standards MIL-STD-2073-1E and MIL-STD-129. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. Compliance with the Buy American Act, Berry Amendment, and various DFARS cybersecurity and hazardous material labeling standards is required. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system, and inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1541

Solicitation SPE7M4-27-T-1541 is issued by the DLA Weapons Support Fluid Handling Division for the procurement of 10 diaphragm baffles, identified as critical application items. The required hardware is Eaton Corporation 86090 part number 200819, with NSN 4820003350017. The contract specifies a delivery timeframe of 70 days after receipt of order, with a need ship date of October 22, 2026, and an original required delivery date of April 30, 2027. Delivery is FOB Origin, and both inspection and acceptance will occur at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, while ensuring palletization follows RP001 DLA packaging requirements. Technical and quality requirements are governed by the DLA Master List, which takes precedence over general packaging standards. Compliance with CMMC Level 2 self-assessment and covered defense information regulations is mandatory. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to domestic material restrictions such as the Buy American Act and the Berry Amendment. The solicitation falls under NAICS code 336419.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1373

Solicitation SPE7M1-27-T-1373 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 13 units of Guard Assembly Weather, identified by NSN 1285-01-491-4985. The items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of March 15, 2027, and a need ship date of April 20, 2027. The procurement is governed by NAICS code 336419 and includes a price evaluation preference for certified HUBZone Small Business Concerns. Technical compliance requires adherence to reference drawing 53711 6736829 Revision D and strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. The contract is subject to stringent export controls under ITAR and EAR, requiring approved US/Canada Joint Certification Program certification for access to technical data. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity requirements. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-5935

Solicitation SPE4A6-27-T-5935, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of four rocket motor covers (NSN 1420-00-172-6913). Each cover consists of a 1/8 inch aluminum door covered with 1/8 inch cork sheeting and includes four attaching screws held by clips. The contract requires the delivery of one First Article Test unit to Hill AFB within 120 calendar days of the contract date, with the remaining quantity due within 441 days. Inspection and acceptance will occur at the origin. To be eligible for award, offerors must possess an approved US/Canada Joint Certification Program certification and DLA approval to access export-controlled technical data subject to ITAR or EAR. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. While this is not a small business set-aside, a price evaluation preference is available for SBA-certified HUBZone small business concerns. Administrative requirements include the use of Wide Area WorkFlow for invoicing and adherence to DLA packaging requirements RP001 and marking standard RQ017.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-1721

Solicitation SPE4A7-27-T-1721 is a fixed-price procurement issued by the Defense Logistics Agency (DLA) Weapons Support ASC Supplier Oper AE and AF Div for seven Radome Feed Assemblies (NSN 1430-01-392-5198). The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of November 15, 2026, and an original required delivery date of May 31, 2027. This is not a small business set-aside, and it falls under NAICS code 336419. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges and the most expedited delivery schedule possible, as fewer delivery days may be granted an evaluation preference. Strict compliance is required regarding manufacturing and security; items produced via additive manufacturing are ineligible for award. Eligible offerors must possess an approved US/Canada Joint Certification Program (JCP) certification and DLA authority approval to access export-controlled technical data subject to ITAR or EAR. Quality standards require a manufacturer's inspection system compliant with ISO 9001:2015 or an equivalent, with origin inspection required per FAR 52.246-2. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PIN, FIRING, LAUNCHER

Solicitation # SPE4A6-27-T-5735

Solicitation SPE4A6-27-T-5735 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for 30 units of Launcher Firing Pins, identified by NSN 1440-01-358-5313. The contract requires delivery within 315 days after order, with a need ship date of April 13, 2027, and a final required delivery date of March 11, 2028. Performance is based on FOB Origin, with inspection and acceptance occurring at the destination, specifically Hill AFB, Utah. A critical requirement for this award is the delivery of two units for government first article testing within 90 calendar days of the contract date. The procurement is subject to strict export controls under ITAR and EAR, requiring offerors to maintain an approved US/Canada Joint Certification Program certification to access technical data. Quality standards are rigorous, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. The solicitation includes a price evaluation preference for certified HUBZone small businesses and mandates compliance with the Buy American Act and the Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

7 days ago

DEADLINE

in 1 day

AI Contract Overview

NASA Kennedy Space Center is seeking input from industry, academia, and small businesses to identify potential partners and innovative applications for the Mass Spectrometer observing lunar operations (MSolo), a ruggedized commercial-off-the-shelf quadrupole mass spectrometer designed for in-situ volatile gas analysis on the lunar surface. The instrument, weighing 5.0 kg with an additional 2–3 kg for the radiator bracket, operates within a 0–100 m/z mass range at 1 amu resolution, consuming 36 watts of power from a 28 VDC ±6/-4 VDC source, and communicates via RS-422 at rates no faster than 16 kbps while generating approximately 0.67 gigabytes of data per day. It features an onboard Calibration Gas System for autonomous health monitoring and is sized at 15.5cm x 20cm x 46cm, making it suitable for integration with landers, rovers, or orbital platforms. NASA is evaluating technical solutions, operational concepts, and commercial models that enable rapid infusion of MSolo into upcoming lunar missions, with particular interest in compatibility with mass, volume, center-of-gravity, power, thermal, mechanical, data interface, and environmental constraints. Respondents must submit proposals in PDF format, not exceeding ten pages, by August 3, 2026, to Christina L. Williams, including company name, point of contact, and socioeconomic status. Proprietary or confidential information must be clearly marked, and while NASA will protect such data to the extent permitted by law, no financial reimbursement will be provided for response preparation or submission. The agency is especially interested in partnership structures such as cost-sharing agreements, Cooperative Research and Development Agreements (CRADA), and Non-Reimbursable Space Act Agreements (SAA), and welcomes input from potential prime contractors for future lunar services. This Request for Information is strictly for market research and planning purposes and does not constitute a solicitation for proposals or entail any financial obligation from NASA.

General Info

NASA seeks partners for rapid integration and commercialization of MSolo instrument in lunar missions.

Agency

National Aeronautics And Space Administration → NASA Kennedy Space Center

NAICS

336419 - Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

Place of Performance

Orlando, FL, 32899, USA

Set-Aside

NONE

Documents

RFI-KSC-MSolo Gas Analysis Instrument-2026

rfi

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 4

Sources Sought

Response DeadlineAug 3

Deadline has passed

Submission Closed

08/03/2026, 09:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNational Aeronautics And Space Administration → NASA Kennedy Space Center

Contacts1 person available

OfficeKENNEDY SPACE CENTER, FL, 32899, USA

Organization / AgencyNational Aeronautics And Space Administration → NASA Kennedy Space Center

Office AddressKENNEDY SPACE CENTER, FL, 32899, USA

Contacts

Christina L. Williams Center POC for RFI

contact@example.gov

Full Description

+ FULL DESCRIPTION IN ATTACHED RFI PACKAGE +

Identify potential partners and innovative applications for the Mass Spectrometer observing lunar operations (MSolo) instrument. NASA is looking for opportunities for rapid infusion into upcoming lunar missions. This RFI seeks to assess the breadth of technical solutions, operational concepts, and commercial models that could maximize the instrument’s scientific and commercial value.