Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MAT 8 Mover Wall Fabrication and Installation

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of The Interior → Ibc Acq Svcs Directorate (00004)

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Fort Hood, TX, USA

Set-Aside

SDVOSBC

Documents

This scope was carved out of 140D0427R0121.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Z--Dalton Mountain Multi-Use (DMMU) MAT8 Mover Wall Replacement in Fort Hood, TX

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Ibc Acq Svcs Directorate (00004)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Interior → Ibc Acq Svcs Directorate (00004)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and installs the MAT 8 mover wall for prime contractors on Department of the Interior projects at Fort Hood. Procures specialized wall materials, performs off-site fabrication, and executes on-site installation and assembly using heavy lifting equipment and precision alignment tools. Delivers a fully installed and operational mover wall.

Similar Contracts

Same NAICS industry code

Metal Decking & Fabrication

DAS Procurement

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Scrap Metal Container Supply and MaintenanceThis subcontract with the California Department of Transportation involves the supply and ongoing maintenance of specialized scrap metal containers for prime contractors working on maintenance station projects. The provider is responsible for delivering 40-cubic yard steel containers equipped with steel wheels and rainproof covers to ensure operational efficiency during inclement weather. These containers must be serviced regularly to remain functional and free of graffiti. The scope of work specifically covers deliveries and maintenance for stations located in Salinas, Santa Cruz, and Hollister, with the primary place of performance centered in Monterey. Interested parties should note the response deadline of November 19, 2026, for this project categorized under NAICS code 332312.

California Department of Transportation

POSTED

about 4 hours ago

DEADLINE

Supply of Exhaust Pipe (NSN 4520-01-601-2709)This subcontract involves the supply of 35 units of specialized exhaust piping meeting NSN 4520-01-601-2709 specifications for prime contractors supporting DLA Troop Support Construction and Equipment contracts. The selected provider must manufacture or source the pipes and ensure all items are packaged according to ASTM D3951 standards. Strict adherence to the Berry Amendment and the Buy American Act is required, and the contractor must possess a valid CAGE Code and UEI. The opportunity is a total small business set-aside under NAICS code 332312 for the Department of Defense, specifically the DDSP New Cumberland Facility. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

Supply of Self-Locking Plate Nuts (NSN 5310-01-684-0169)This subcontract involves the supply of 25 self-locking plate nuts, identified by NSN 5310-01-684-0169, for prime contractors working with the Defense Logistics Agency Weapons Support ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing the components and must ensure full supply chain traceability documentation in accordance with DLA Directives. Additionally, all items must be packaged according to MIL-STD-2073-1E standards. Administrative requirements include mandatory registration in the DLA Account Management and Provisioning System. The performance of this contract will take place at JB MDL. Interested parties must adhere to the response deadline of November 12, 2026, as specified in the solicitation details.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Battery Box Enclosure ManufacturerThis subcontract involves the fabrication of a physical housing for a critical application battery system intended for prime contractors under Defense Logistics Agency supply contracts. The manufacturer is required to produce one completed empty battery box enclosure that strictly adheres to Intellipower Inc. part number FB00025 specifications, including the application of military-grade finishes or coatings as defined in the technical data package. All materials used in the production process must be compliant with the Buy American Act. The project falls under NAICS code 332312 and is managed by the Department of Defense. Interested parties must respond by November 16, 2026, for performance located at FPO 96694-2900.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Supply of ISO-Compatible Utility Freight Containers (QUADCONS)

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 6 hours ago

DEADLINE

Supply of Tower Assembly, DESI (NSN 4440-01-213-4499)

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

Commander Seat Pedestal Assembly ManufacturingThis subcontract involves the manufacturing of 10 Commander Seat Pedestal Assemblies for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The project requires the fabrication of components according to specific technical drawings and strict adherence to NSN 2510-00-168-2236 specifications. To ensure compliance with maritime standards, the contractor must utilize precision machining and welding equipment. The work is categorized under NAICS code 332312 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, following the posting date of November 4, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Supply of Structural Angle (Part 60-12231)This subcontract involves the supply of structural angle components, specifically Part Number 60-12231, for Department of Defense aerospace projects. The components must be manufactured or sourced using 7075-T6511 aluminum alloy, with a delivery requirement of 9.000 inches of material. To ensure compliance, the producing entity must possess a valid CAGE code and provide a Certificate of Quality Conformance verifying that all material standards have been met. All items must be packaged according to ASTM D3951 standards. The contract is managed under NAICS code 332312 for the Office of the Competition Advocate Building. Interested parties should note the response deadline of November 11, 2026, for this Department of Defense requirement.

OFFICE OF THE COMPETITION ADVOCATE BUILDING

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Support Plates (NSN 5342-01-264-6859)This subcontract involves the manufacturing of 40 support plates under NSN 5342-01-264-6859 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Division. The selected contractor will be responsible for fabricating metal plates to precise dimensions and tolerances using CNC and metal fabrication machinery. All work must strictly adhere to the Exact Product definition and the DLA Master List of Technical and Quality Requirements RA001. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312. Compliance with the Buy American and Free Trade Agreements is required per clause 252.225-7035. The project is based in zip code 95304-5000, with a response deadline set for November 11, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

ANGLE STRUCTURAL 60-12

Solicitation # SPEFA5-27-Q-0021

Solicitation SPEFA5-27-Q-0021 is a small business set-aside for the procurement of structural angles, part number 60-12231 7075-T6511, in accordance with specification AMS-QQ-A-200/11 REV A. The requirement consists of two line items, each for a quantity of 9.000 inches, under a firm fixed price agreement. Delivery is required within 30 days after order, with the destination for both inspection and acceptance being the Fleet Readiness Center East in Cherry Point, North Carolina. The contract mandates strict quality and packaging standards, requiring a Certificate of Quality Conformance and adherence to ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements from the DLA Master List take precedence over other packaging standards. Award will be based on a best-value comparative assessment, weighing price, quoted delivery, and past performance, with SPRS assessments being the most significant non-price factor. Invoicing must be processed electronically through the Wide Area Workflow system.

OFFICE OF THE COMPETITION ADVOCATE BUILDING

POSTED

about 6 hours ago

DEADLINE

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-27-T-2782

Solicitation SPE4A7-27-T-2782 is a request for the procurement of 13 units of a Resilient Weapon System Mount, identified by NSN 5342010199123 and part number 22144. This critical application item must be manufactured in accordance with drawing 22144 dated October 27, 1967, and is subject to a non-extendable shelf life of 60 months. The contract specifies a delivery timeline of 228 days after order, with a need ship date of June 29, 2027, and a final required delivery date of October 31, 2027. Shipping is established as FOB Origin, with the delivery destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quality assurance is stringent, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H133, with inspection and acceptance occurring at the point of origin. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with a strict prohibition on the use of mercury or mercury compounds. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and the use of the Wide Area WorkFlow system for electronic invoicing. Offerors not listed as approved sources must obtain source approval from the design control activity.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of The Interior → Ibc Acq Svcs Directorate (00004)

Same awarding agency

Range Systems Integration and Testing

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 11 hours ago

DEADLINE

Range Facility General Repairs

Commercial and Institutional Building Construction

POSTED

about 11 hours ago

DEADLINE

Range Design and Engineering Services

Engineering Services

POSTED

about 11 hours ago

DEADLINE

HEPA Vacuuming and Floor ScrubbingThis subcontract opportunity is for final industrial cleaning services at Department of the Interior facility projects located in Washington, DC. The selected contractor will be responsible for vacuuming the entire garage using HEPA-filtered equipment and performing wet scrubbing of the garage floors to ensure both the floor and ceiling areas are thoroughly cleaned. All work must be performed in strict adherence to OSHA compliance standards. The project is designated as a total Small Business Set Aside under NAICS code 561720 and is managed by the Ibc Acq Svcs Directorate. Interested parties must submit their responses by November 19, 2026.

Janitorial Services

POSTED

about 11 hours ago

DEADLINE

Piping Insulation PatchingThis subcontract opportunity, titled Piping Insulation Patching, involves the repair of damaged fiberglass insulation for prime contractors working on Department of the Interior facility projects in Washington, DC. The scope of work requires patching approximately 50 linear feet of exposed fiberglass insulation on garage piping using specialized insulation adhesives and tape to ensure all piping is properly repaired and sealed. The project is designated as a Total Small Business Set Aside under NAICS code 238160 and is managed by the Ibc Acq Svcs Directorate. All work must be performed in strict adherence to OSHA compliance standards. The solicitation was posted on November 4, 2026, with a response deadline of November 19, 2026.

Roofing Contractors

POSTED

about 11 hours ago

DEADLINE

Ceiling Patching and Pipe PaintingThis small business set-aside subcontract involves surface preparation, patching, and painting for Department of the Interior facility projects located in Washington, DC. The scope of work includes scraping peeling paint from approximately 250 linear feet of piping and patching ceiling holes resulting from fastener removal. All industrial paint applications must match surrounding surfaces in accordance with the 2025 GSA PBS Core Building Standards to ensure a seamless finish. Managed by the Ibc Acq Svcs Directorate under NAICS code 238320, the project requires the delivery of fully finished ceilings and piping. The solicitation was posted on November 4, 2026, with a response deadline of November 19, 2026.

Painting and Wall Covering Contractors

POSTED

about 11 hours ago

DEADLINE

Electrical Conduit and Junction Box SupportThis small business set-aside subcontract involves providing specialized electrical support services for Department of the Interior facility projects located in Washington, DC. The primary objective is to deliver secured and independently supported electrical infrastructure by installing hangers and fasteners for approximately 20 junction boxes and 100 linear feet of conduit and associated devices that are currently supported by drywall bulkheads. All work must be performed in strict compliance with National Electric Code and OSHA requirements. This opportunity is managed by the Ibc Acq Svcs Directorate under NAICS code 238210, with a response deadline set for November 19, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 11 hours ago

DEADLINE

Garage Drywall Bulkhead DemolitionThis subcontract for the Department of the Interior involves the demolition of approximately 1,500 linear feet of drywall bulkheads, including all associated metal studs, at a facility in Washington, DC. The selected contractor will work under prime contractors to execute the removal and delivery of all demolished materials and debris. The project requires strict adherence to local, state, federal, and DOT FMCSR regulations for debris disposal, as well as compliance with OSHA standards and the project-specific Health and Safety Plan. This opportunity is designated as a total Small Business Set Aside under NAICS code 238910, with a response deadline of November 19, 2026.

Site Preparation Contractors

POSTED

about 11 hours ago

DEADLINE

Z--Dalton Mountain Multi-Use (DMMU) MAT8 Mover Wall Replacement in Fort Hood, TX

Solicitation # 140D0427R0121

The Department of the Interior, through the Interior Business Center Acquisition Services Directorate, is seeking a single firm-fixed-price construction contract for the repair and modernization of the Dalton Mountain Multi-Use (DMMU) range at Fort Hood, Texas. This acquisition, identified by solicitation number 140D0427R0121, is a competitive set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The project scope encompasses rapid design planning, the replacement and repair of the DMMU MAT 8 mover wall, general range facility upgrades, and the procurement and installation of necessary systems. The contract may also include up to 20 separately priced optional work items, with an estimated construction magnitude between 10 million and 25 million dollars. The government will utilize negotiated procedures and a lowest-price technically acceptable (LPTA) source selection approach, evaluating proposals based on price and an executive summary of the technical approach. On-site construction is anticipated to begin by February 1, 2027, following a solicitation release expected around November 16, 2026. Awardees will be required to provide performance and payment bonds and must adhere to all applicable domestic construction-material requirements, safety codes, and quality-control specifications. Primary coordination for this effort is managed by Kevin R. Woody.

Commercial and Institutional Building Construction

POSTED

about 11 hours ago

DEADLINE

V--Exclusive Use Helicopter Flight Services, Yosemite

Solicitation # 140D0426R0068

Solicitation 140D0426R0068 is an Indefinite Quantity contract set aside for small businesses to provide exclusive use helicopter flight services at Yosemite National Park, with a designated reporting base at Crane Flat Helbase. The contractor is responsible for providing a turbine engine aircraft with skid landing gear and dual hydraulics, capable of a 1,500-pound non-jettisonable payload at 7,000 feet pressure altitude and 30 degrees Celsius. Operations involve transporting personnel and cargo for natural resource missions, including search and rescue, fire suppression, aerial ignition, and law enforcement reconnaissance, often operating between 2,000 and 14,000 feet MSL in temperatures exceeding 38 degrees Celsius. The scope of work requires the provision of all pilots, fuel, and a fuel servicing vehicle, with pilots holding at least an FAA commercial pilot certificate and rotorcraft-helicopter rating. The government will award the contract based on best value, utilizing a tradeoff analysis where technical capability, organizational safety, and past performance are weighted equally and are significantly more important than the total evaluated price. Performance periods are estimated for Year Two (March 2028 to February 2029) and Year Three (March 2029 to February 2030). Invoicing must be processed electronically through the Invoice Processing Platform with required Aircraft Use Reports. Strict equipment standards apply, including specific high-visibility markings for rotor blades and color-coded fuel identification for servicing vehicles. Proposals must be submitted via email to the Interior Business Center and organized into volumes covering the offer, technical capability, and organizational safety.

Nonscheduled Chartered Passenger Air Transportation

POSTED

about 11 hours ago

DEADLINE

Garage Drywall Demolition at Udall Building

Solicitation # 140D0427Q0949

Solicitation 140D0427Q0949 is a combined synopsis and request for quote for demolition and minor construction services at the Stewart Lee Udall Department of the Interior Building in Washington, DC. The project involves the removal of drywall bulkheads in the building's garage, specifically divided into two areas: Ramp A/B and Ramp C/D/G. For Ramp A/B, the contractor must independently support approximately 20 junction boxes and 100 linear feet of conduit before demolition. This is a total small business set-aside under NAICS code 238910, with a business size standard of 19 million dollars. The government will award a firm fixed price contract based on the lowest price technically acceptable (LPTA) basis. The period of performance is 90 days from the Notice to Proceed, with all work and cleanup required to be completed within three months of the award. Technical proposals are limited to five pages and must demonstrate five years of experience, include a tentative project schedule, and provide draft Quality Control and Contractor Management Plans. Additionally, a contract-specific Health and Safety Plan is required. Quotes must be submitted via SF 1442, including an SF-24 Bid Bond, by November 19, 2026, at 2:00 PM EST. All waste products become the property of the contractor and must be disposed of according to local, state, and federal regulations.

Site Preparation Contractors

POSTED

about 11 hours ago

DEADLINE

Software AG Technical Support and Maintenance ServicesThis subcontract opportunity, titled Software AG Technical Support and Maintenance Services, is issued by the Department of the Interior's Ibc Acq Svcs Directorate. The project focuses on providing essential software maintenance and technical support for Software AG products to sustain mission-critical payroll processing for prime contractors on Interior Business Center projects. Key responsibilities include deploying security patches and updates, as well as troubleshooting complex interactions between software and z/OS, Windows, and Red Hat Linux platforms. To ensure successful delivery, the contract requires certified Software AG technical specialists who can provide updated software versions and thoroughly documented technical resolutions. Interested parties should note that the response deadline is November 20, 2026, and the work falls under NAICS code 541519.

Other Computer Related Services

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Metal Working & Fabrication

W6QM Micc-Ft Leonard Wood

POSTED

about 11 hours ago

DEADLINE

Radioactive Material Packaging and Labeling Supplier

242-NETWORK Contract Office 02 (36C242)

POSTED

about 11 hours ago

DEADLINE

Manufacture and Supply of Aluminum Pipe Caps (NSN 4730012585116)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Metal Bars (NSN 9530016166325)

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Miscellaneous Equipment Shipping and Storage Container

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Axle Assembly Manufacturing and Supply (NSN 2530-01-540-5592)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Crew Berth Grab Bars

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Shear Bolts (NSN 5306011250922)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Industrial Fluid Cooler Baffle Supplier

POSTED

DEADLINE

Supply of Plain Hexagon Nuts (NSN 5310-00-676-8265)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Structural Angles (NSN 9540014261232)

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Fabrication and Supply of Ground Handling Cradle

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS