Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

MCL Ambursen Dam Cleanout

Active
W912EF18R0028Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a firm-fixed-price construction opportunity set aside exclusively for small businesses, focused on sediment removal at the Mill Creek Diversion Dam in Walla Walla, Washington. The estimated contract value ranges between $100,000 and $250,000. The project involves removing approximately 350 cubic yards of compact silt accumulated inside the concrete dam, which is about 251 feet long. The contractor is responsible for loosening and hauling the silt to a designated disposal site on the project, as well as surveying the site to confirm removal to the specified depth. Access to the work area is provided via two 23-foot deep shafts with ladders, and specific fall protection measures must be followed once sediment removal alters the access conditions. Solicitation for the project was set to be issued around May 11, 2018, with a response deadline of approximately three weeks. The contractor will have 90 days from the Notice to Proceed to complete the work. The contract falls under NAICS code 238910 with a small business size standard of $15 million. The project requires a performance bond and an irrevocable letter of credit. Plans and additional documents will be made available free of charge through the government’s contracting platform. The contracting office is the US Army Engineer District in Walla Walla, Washington, with Matthew W. Boudreaux listed as the point of contact.

General Info

Firm-fixed-price sediment removal at Mill Creek Dam, Walla Walla, $100K-$250K, small business only.

NAICS

238910 - Site Preparation Contractors

Place of Performance

3211 Reservoir Rd, Walla Walla, WA 99362, WA, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

6 updates
PhasePresolicitation
Posted

Presolicitation

Type Changed

Presolicitation → Sources Sought

Notice updated

Response deadline changed from Apr 18, 2018 to Apr 11, 2018. The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Type Changed

Sources Sought → Presolicitation

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → US Army Engineer District Walla Wal
Contacts1 person available
OfficeWALLA WALLA, WA, 99362-1876, USA
Office AddressWALLA WALLA, WA, 99362-1876, USA
Contacts

Full Description

Show more
THE SOLICITATION NUMBER HAS BEEN CHANGED This requirement will be advertised as W912EF-18-Q-0091 1.)This 100% set-aside for small business firm-fixed-price construction contract will be at the Mill Creek Diversion Dam located off Reservoir Road in Walla Walla, Washington 99362. Construction magnitude is estimated to be between $100,000 and $250,000. A performance bond and an irrevocable letter of credit will be required. The North American Industry Classification System (NAICS) code for this project is 238910 and the associated small business size standard is $15,000,000. 2.) Work is to remove and dispose of approximately 350 Cubic Yards (CY) sediment (silt) that has accumulated inside the Concrete Dam. This Dam is located in Walla Walla Washington on the Mill Creek Stream. The Structure is approximately 251 feet long The Silt is compact and will require a method to loosen it up enough to remove it from inside the dam. After removal silt shall be hauled to a disposal site located on the project. This work will require the services of a land surveyor to ensure that the sediment has been removed to the specified depth. Surveying is the responsibility of the Contractor. Work area access is by two (2) 23 foot deep access shafts, via ladder, located at each end of the dam. Access into the dam once the silt has been removed from the base of the ladder(s) may convert the entrance into a Fall Protection Required Entrance. At this time, prior to silt removal, the ladders are less than 20 feet high, 20 feet is when the entrance will become a Fall Protection requirement 3.) Invitation will be issued on or about 11-MAY-2018. The governement intends to allow the solicitation to remain open for three weeks. The work is to be completed within 90 days from Notice to Proceed. 4.) Plans will be available on FBO free of charge with the posted solicitation.

Similar Contracts

Same NAICS industry code

NAICS: 238910
New
SLED
300 Burr St - Demolition of Commercial Building and Parking Lots
Solicitation # 2026-DEPARTMENT-052
The City of Jackson, through its Community Development agency, has issued solicitation 2026-DEPARTMENT-052 for the demolition of a commercial building and parking lots located at 300 Burr St. The scope of work includes the removal of structures and debris, asbestos abatement, and comprehensive site restoration, including grading and greening to blend with surrounding properties. The contract will be awarded to the lowest responsible contractor who meets all licensing requirements, specifically a demolition license for Residential Builders or Maintenance Alteration with an R-Home Wrecking classification. Bidders must submit their quotes via the e-Procurement Portal by October 27, 2026, including a completed pricing table, ethics disclosure form, and proof of licensing. Key contractual obligations include a one-year warranty on all materials and work, and a requirement to provide bonds, licenses, and environmental insurance within ten days of the award. Performance is subject to liquidated damages of 1,000 dollars per day for failure to meet the completion date, though extensions may be granted for winter weather provided a rough grade is installed by December 30 and final restoration is completed by May 1, 2027. The City maintains an opt-out clause allowing the removal of parcels from the award with limited reimbursement to the contractor. Compliance with Equal Employment Opportunity certifications and HUD Section 3 regulations for contracts exceeding 100,000 dollars is mandatory. Payment is processed bi-weekly upon approval by the Department of Neighborhood and Economic Operations, provided invoices contain detailed line items for grading, greening, demolition, and asbestos abatement.
Community Development

POSTED

about 11 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → US Army Engineer District Walla Wal

Same awarding agency

NAICS: 332812
New
Federal
Dworshak Skeleton Bay Draft Tube Bulkhead Rehabilitation
Solicitation # W912EF27QA002
The US Army Corps of Engineers, Walla Walla District, is soliciting a firm fixed price contract for the rehabilitation of twelve draft tube bulkheads and associated seal keeper bars at Dworshak Dam. This total small business set-aside project requires the contractor to provide all personnel, materials, equipment, and supervision necessary for the pickup, dry-blast cleaning to white metal, weld repair, and new coating application of the bulkheads. The work must be performed in accordance with strict industry standards, including AWS D1.1 for welding and SSPC SP 5 / NACE No. 1 for surface preparation. Deliverables are scheduled across multiple units, with specific return dates such as January 23, 2027, for Unit 4 and April 19, 2027, for Unit 5. The contractor must be a certified SSPC QP 3 painting contractor or hold an AISC Complex Coatings endorsement and provide a third-party certified coatings inspector at the SSPC-PCI Level 2 or NACE CIP Level 2. Quality assurance is paramount, requiring detailed inspection reports for each bulkhead and the use of magnetic flux thickness gages per ASTM D7091. The government reserves the right to conduct quality assurance inspections at the contractor's facility. Proposals are due by October 30, 2026, and will be evaluated based on price and other factors to determine the most advantageous offer. All shipping is required to be FOB destination to the Dworshak Project Office in Ahsahka, Idaho.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

5 days ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS