Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

McNary Lock and Dam Wall Mounted Swing Jib

Awarded

W912EF26PA024Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Army Engineer District Walla Walla has awarded a contract titled McNary Lock and Dam Wall Mounted Swing Jib under solicitation number W912EF26PA024, which was posted on May 28, 2026. This is a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the NAICS code 333923 identifies the industry as Other Industrial Machinery Manufacturing. The contract is for work to be performed at the McNary Lock and Dam in Umatilla, Oregon, with a zipcode of 97882. The performing agency is part of the Department of Defense, with the contracting office located in Walla Walla, Washington, at 99362-1876. Primary point of contact for the contract is Mary Seiner, reachable at 509-527-7228 or mary.l.seiner@usace.army.mil, with Kristin Hyde listed as the secondary contact at kristin.a.hernandez@usace.army.mil. The award notice indicates that the contract has been finalized, and details can be viewed online through the SAM.gov portal using the provided UI link. The nature of the work involves the modification or installation of a wall-mounted swing jib at the dam facility, which supports critical infrastructure operations related to navigation and water management.

General Info

U.S. Army awards small business contract for McNary Lock and Dam swing jib installation in Umatilla, Oregon.

Agency

Department Of Defense → US Army Engineer District Walla WalView Agency

Contract Value

$39,856

NAICS

333923 - Overhead Traveling Crane, Hoist, and Monorail System ManufacturingView NAICS

Place of Performance

Umatilla, OR, 97882, USA

Set-Aside

SBA

Awardee

HAN-TEK INCView Profile

Award Issued Date

05/25/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedMay 28

Award Notice

AwardedMay 25

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → US Army Engineer District Walla Wal

Contacts2 people available

OfficeWALLA WALLA, WA, 99362-1876, USA

Organization / Agency

Department Of Defense → US Army Engineer District Walla Wal

View Agency Profile

Office AddressWALLA WALLA, WA, 99362-1876, USA

Contacts

Mary Seiner

contact@example.gov

+1 (555) 000-0000

Kristin Hyde

contact@example.gov

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=edb3d9504eea48c9b511252ab2c5532a

Similar Contracts

Same NAICS industry code

Solicitation # SPE8EE-26-T-2425

Solicitation SPE8EE-26-T-2425 is issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of one block and tackle, specifically The Crosby Group LLC part number 775254 (NSN 3940-01-658-5011). The requirement is for a quantity of one unit with a delivery timeframe of five days after order, and an original required delivery date of August 28, 2026. Delivery is specified as FOB Origin, with inspection and acceptance occurring at the destination. Shipping is directed to PCU Bougainville (LHA 8) via both parcel post and freight addresses in Mississippi. The procurement adheres to strict technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Palletization must comply with DLA packaging requirements for procurement (RP001). The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations for this requirement were due by September 11, 2026, and are managed by Philip Ferrara.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 23 hours ago

DEADLINE

SPRMM1-26-Q-GC63-CHAIN HOIST

Solicitation # SPRMM1-26-Q-GC63

Solicitation SPRMM1-26-Q-GC63 is a request for quotations issued by DLA Mechanicsburg for the procurement of two chain hoists, identified by NSN 7HH 3950-01-702-6959 and reference number 8196788-2. This is a high-priority requirement to support a US Navy CASREP due to mission-essential equipment breakdown, necessitating ASAP delivery. The items are to be delivered FOB Destination to the USS JOHN P MURTHA LPD 26. The procurement falls under NAICS code 333923 and is not a small business set-aside. The contractor is responsible for ensuring all items are new and unused, with inspection and acceptance occurring at the origin. Packaging must adhere to MIL-STD-2073-1 and ASTM D3951-18, with specific marking requirements per MIL-STD-129 and MIL-STD-130. All hazardous materials must be accompanied by Safety Data Sheets and GHS compliant labels. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and evidence of product traceability.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

39--SLING,MULTIPLE LEG

Solicitation # SPE8EE-26-Q-0474

Solicitation SPE8EE-26-Q-0474 is a Request for Quotations issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of multiple leg slings under NSN 3940012703389. The requirement consists of two line items totaling 428 units, with 27 units on line 0001 and 401 units on line 0002. All items are to be delivered to DLA Distribution Jacksonville within 250 days after receipt of the order. This procurement is a total small business set-aside under NAICS code 333923, and the award will be based on the best value to the government, evaluating factors such as price, offered delivery, and past performance. The contract specifies strict adherence to packaging and labeling standards, requiring compliance with ASTM D3951, MIL-STD-129, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. All quotes must be submitted via the DIBBS portal by the deadline of September 17, 2026. The procurement incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and specific requirements for safeguarding covered defense information.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Building 514 Crane Rail Cross Bracing Installation

Solicitation # N0025326Q0008

The Naval Undersea Warfare Center Division Keyport is soliciting quotes for the installation of crane rail cross bracing in Building 514. This firm-fixed-price construction requirement involves relocating high-pressure and low-pressure air lines and electrical utilities, welding gussets and plate stiffeners, and installing bolted cross bracing. The contractor is responsible for providing all labor, materials, and equipment, including a runway rail survey performed by a registered design professional to ensure alignment meets CMAA No. 74 criteria. All work must comply with EM-385-1-1 safety standards, UFC 1-200-01 DoD Building Code, and NAVFAC P307 guidelines. This procurement is a 100% small business set-aside under NAICS code 333923. The government will award the contract based on a Lowest Price Technically Acceptable (LPTA) analysis. To be considered, offerors must demonstrate at least three years of experience in commercial or industrial applications, provide certifications for a Site Safety and Health Officer, and submit a safety data sheet detailing OSHA DART and Total Recordable Case rates. Bid bonds are required for proposals of 150,000 dollars or more, and performance and payment bonds must be submitted within ten days of award. Proposals must be submitted electronically to the designated contracting officials by the specified deadline.

Naval Undersea Warfare Center

POSTED

DEADLINE

Purchase of 49ft Self-Drive Work Platform

Solicitation # 70Z02426Q0000064

Solicitation 70Z02426Q0000064 is a request for the purchase of one brand-new, commercial-grade, bi-energy self-drive aerial work platform for the Department of Homeland Security, specifically the Coast Guard. The equipment must function as a 49ft hybrid articulating/telescopic boom platform with a minimum platform height of 49ft 6in and a 500 lbs load capacity. Technical requirements include a Kubota 902 or equivalent diesel engine, CE/ANSI compliance, and the provision of comprehensive documentation, including operator and parts manuals and electrical/hydraulic schematics. The award will be a single firm-fixed price contract based on the Lowest Price Technically Acceptable (LPTA) evaluation method. The vendor is responsible for FOB Destination delivery to New Haven, Connecticut, which includes a pre-delivery inspection, on-site commissioning by a certified technician, and operator training. Final acceptance is contingent upon the verification of physical dimensions, a successful dual-power test, and a safety interlock demonstration ensuring the boom cannot elevate without deployed outriggers. Quotes must include a completed SF18, a detailed price breakdown, and a technical response demonstrating an understanding of the scope of work. Submissions are due by September 18, 2026, to the designated contracting personnel.

Base BOSTON(00024)

POSTED

DEADLINE

Fall Restraint- Solicitation Amendment

Solicitation # W50S7G26QA0240001

W7NJ Uspfo Activity Moang 139

POSTED

DEADLINE

Supply of NSN 3920-01-688-9983

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EF-26-T-1761

Solicitation SPE8EF-26-T-1761 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of eight hand trucks, identified by NSN 3920-01-688-9983. This procurement is a total small business set-aside under NAICS code 333923. The required delivery date is January 6, 2027, with a need ship date of March 1, 2027, and a delivery lead time of 160 days. Items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 for palletization. Offerors must submit quotes via the DIBBS system and utilize the Wide Area WorkFlow system for electronic invoicing and receiving reports. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Additionally, the government will not evaluate or award contracts for items produced using additive manufacturing.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-334P

This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of one chain hoist under National Stock Number 3950-01-198-5598. The contract requires the delivery of one unit along with a manufacturer's commercial manual covering operation, services, maintenance, and repair. Delivery is expected within 168 days after receipt of the order, with the place of performance located in Tracy, California. The agreement is subject to specific DLA packaging and quality requirements, including the removal of government identification from any non-accepted supplies. Technical and quality standards are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The primary point of contact for this requirement is Michael Reese.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

REPAIR KIT, WINCH

Solicitation # SPE7L1-26-T-10T8

This contract, solicitation number SPE7L1-26-T-10T8, is issued by the Department of Defense Land Supply Chain for the procurement of one winch repair kit. The item is identified by NSN 3950-01-603-1433 and Oshkosh Defense LLC part number 95SK416. The procurement falls under NAICS code 333923 and requires compliance with the Buy American Act. The delivery terms specify a timeframe of 10 days after order, with shipping set as FOB Origin and inspection and acceptance occurring at the destination. The item is to be delivered to the 405th Army Field Support Brigade in Vilseck, Germany. Packaging must adhere to ASTM D3951 and MIL-STD-129, while following DLA packaging requirements and the DLA Master List of Technical and Quality Requirements. The original required delivery date is set for September 9, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

FAIRLEAD, SHEAVE

Solicitation # SPE8EE-26-T-2414

Solicitation SPE8EE-26-T-2414 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of one Fairlead, Sheave, identified by NSN 3950-01-701-4712. The item must be manufactured in accordance with Basic Drawing NR 53711 8287922, Revision DTD 11/01/2014. Delivery is required within 20 days after receipt of order, with the destination and acceptance point being the USNS ARCTIC T AOE 8 at FPO AE 09564. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. This procurement is not a small business set-aside, although a price evaluation preference is available for certified HUBZone small business concerns. The contract is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-controlled technical data training. Additionally, the government will not evaluate offers utilizing additive manufacturing. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with the Buy American Act and Berry Amendment for domestic sourcing.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Tensioner Pulley Assembly Supplier

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

More opportunities from Department Of Defense → US Army Engineer District Walla Wal

Same awarding agency

Lower Monumental Dam Diffuser Grating

Solicitation # W912EF26QA079

Solicitation W912EF26QA079 is a firm fixed price contract issued by the US Army Engineer District Walla Walla for the procurement of the LMA Adult Collection Channel North Entrance Diffuser Grating. This small business set-aside project, categorized under NAICS code 332312, requires the supply and delivery of one fabricated assembly including all necessary components, fasteners, and anchors to the Lower Monumental Lock and Dam in Kahlotus, Washington. The materials must adhere to ASTM B308/B308M and ASTM B221 standards for aluminum alloys. All components must be delivered and offloaded at the north side of the facility by December 10, 2026, with the contractor required to provide delivery notification fifteen days in advance. The award will be granted to a responsible offeror based on the most advantageous price. Offerors must submit their quotes by September 14, 2026, including a completed General Contract Information section. Key requirements include compliance with the USACE EM 385-1-1(2014) Safety and Health Requirements Manual, DoD item unique identification marking per MIL-STD-130, and shipment labeling per MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements for covered defense information. Invoicing and reporting are to be managed through the Wide Area WorkFlow system.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Supply of Bearing Tube (Part No. 2728271-738)

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

LLA Lewiston Levee Rebuild Parts

Solicitation # W912EF26QA076

The US Army Engineer District Walla Walla, under the Department of Defense, has issued solicitation W912EF26QA076 for the LLA Lewiston Levee Rebuild Parts. This project is categorized under NAICS code 333996 and is designated as a total Small Business Set Aside. The performance of the contract will take place in Pomeroy, Washington. Interested parties must submit their responses by the deadline of September 26, 2026. The primary point of contact for this procurement is Gregory Moyer. This solicitation was officially posted on September 10, 2026, and is managed by the office located in Walla Walla, Washington.

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE

DWA Life Safety Upgrades

Solicitation # W912EF26RSN20

The U.S. Army Corps of Engineers, Walla Walla District, intends to contract for the expansion of the existing Siemens FireFinder XLS fire alarm and suppression system. This project involves adding addressable signaling line circuits, initiating devices, notification appliances, and network hardware to the current life-safety platform. Due to proprietary architecture and the need for strict compliance with UL 864 and NFPA 72 standards, the government intends to restrict the procurement to Siemens brand-name equipment under the authority of 10 U.S.C. 3204(a)(1) and FAR 6.302-1(c). The solicitation is expected in July 2027 under NAICS code 237990, with a small business size standard of 45 million dollars. While this is a notice of intent to procure brand-name products, the government is seeking information from responsible sources who can provide a fully interoperable alternative. To be considered, alternatives must natively communicate on the Siemens SureWire protocol, join the XNET peer-to-peer network, fit into existing card cages, and maintain all active safety listings. Interested parties must submit a statement of capability to the designated point of contact by the specified deadline.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Vertical Barrier Screen (VBS) Mesh Panel Fabrication

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

LLA VBS Fish Mesh

Solicitation # W912EF26QA094

The US Army Engineer District Walla Walla, under the Department of Defense, is soliciting bids for LLA VBS Fish Mesh Screens under solicitation number W912EF26QA094. This requirement is specifically for non-commercial fishing applications and is designated as a Total Small Business Set Aside. Interested offerors must submit their completed solicitation and all required documentation by the response deadline of September 18, 2026. The project involves the production of VBS mesh panels according to detailed technical specifications, including specific requirements for vinyl edging, reinforcement strips, and mesh width. These specifications are outlined in the provided technical drawings for panels 1 through 7. The contract is managed by the office in Walla Walla, Washington, with Kristin Kreutzer serving as the primary point of contact.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

HVAC Troubleshooting, Repair, and Maintenance Services (Blanket Purchase Agreement)

Solicitation # W912EF-26-R-SS34

The US Army Corps of Engineers, Walla Walla District, is conducting a sources-sought announcement to identify capable small businesses for a Blanket Purchase Agreement covering HVAC troubleshooting, repair, and maintenance services. The work spans Idaho, Oregon, and Washington, encompassing a wide range of equipment from small wall-mounted PTAC units to large 1,500-ton industrial water-sourced heat pumps. This opportunity falls under NAICS code 238220, with a small business size standard of 19 million dollars in average annual receipts. Interested firms must submit comprehensive qualifications to be considered for the potential set-aside, including a history of similar projects, reference lists, business size certification, CAGE code, and UEI. Applicants must also provide detailed responses regarding their core competencies, OEM certifications, subcontractor vetting processes, emergency response times, and preferred pricing structures. All responses must be submitted to the contracting officer by September 18, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

HVAC Equipment Supplier

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE

Industrial Coating Specialist

Painting and Wall Covering Contractors

POSTED

DEADLINE

Demolition and Environmental Remediation Contractor

Remediation Services

POSTED

DEADLINE

Electrical Contractor

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

HVAC Controls and Automation Specialist

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS