Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MEASURING TUBE, GAS ANA

Active
SPE2DH-26-T-5802Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The measuring tube for gas analyzer is designed specifically to measure carbon dioxide content in compressed gases with a precise range of 100 to 3000 parts per million for one liter of air. It is constructed as a glass tube with melted tips for safe handling and is supplied in packages of ten units under the unit of issue PG. The item is governed by the DLA Master List of Technical and Quality Requirements, with applicable technical and quality standards referenced by R or I numbers. It is classified as a Type I (Code M) medical item with a mandatory non-extendable shelf life of 24 months, requiring that no more than three months have elapsed from the date of manufacture to the date of government delivery. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and labels must clearly indicate the date of manufacture, expiration or retest date, contract number, and lot number, following the latest revision of MMS1C. Packaging must ensure protection against damage and comply with DLA packaging requirements, using commercial-grade sealed containers and appropriate shipping packaging suitable for safe delivery via common carrier at the lowest cost to the specified point of delivery. The item is identified by NSN 6630-12-189-3126 and is procured under contract number SPE2DH-26-T-5802, with a required delivery within five days of award and a solicitation response deadline of August 11, 2026. Coverage of defense information applies, and removal of government identification from non-accepted supplies is required. The contracting office is under the Department of Defense, Medical Supply Chain FSH, with primary point of contact Tina Vu at the provided email and phone.

General Info

Glass measuring tube for CO₂ in compressed gases, 100–3000 ppm, 24-month shelf life, NSN 6630-12-189-3126, pack of ten.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

UNIT 100214 BOX 1, FPO, AP, 96678, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5802.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MEASURING TUBE,GAS ANALYZER
MEASURING TUBE,GAS ANALYZER
FEATURES DRAEGER CARBON DIOXIDE 100/A-P, FOR MEASURING THE CARBON
DIOXIDE CONTENT IN COMPRESSED GASES; MEASURING RANGE: 100 TO 3000 PARTS
PER MILLION FOR 1 LITER OF AIR; GLASS TUBE ROUND WITH MELTED TIPS
UNIT OF ISSUE: PG (10 EACH PER PACKAGE)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a
SPE2DH-26-T-5802
SECTION B
shelf life of 24 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 24 MONTHS. NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE GOVERNMENT. . SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER. .. ADEQUATE DATA FOR THE NSN/Part Number: 6630-12-189-3126 Quantity: 1 PG Purchase Request: 7017735439QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
DIBBS
DETECTOR, METAL FLAW
Solicitation # SPE4A5-26-T-326N
The contract pertains to the procurement of two Metal Flaw Detectors, part number 23036190, under NSN 6635-01-717-8633, issued by the Department of Defense through DLA. The delivery is required within 171 days from the contract award, with shipment FOB origin and final inspection conducted at the destination. The entire shipment must comply with stringent packaging standards outlined in ASTM D3951, though DLA Master List of Technical and Quality Requirements override any conflicting provisions. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA-specific packaging guidelines. The unit of issue is each, with no variance allowed in quantity, and the delivery address is the DDSP New Cumberland Facility in Pennsylvania. Sampling and quality verification must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes not explicitly defined are treated as major with a verification level of IV or AQL of 1.0. The contract incorporates all relevant technical and quality requirements from the DLA Master List, which control over any other referenced standards. The supplier must ensure complete removal of government identification from non-accepted items. The point of contact for inquiries is Brandy Coward, and the solicitation response deadline was August 12, 2026, with a required ship date of January 31, 2027, and original delivery expected by June 19, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
SLED
Supply of Weather Station and Monitoring ComponentsPutnam County Board of Commissioners is seeking to procure a weather station and associated monitoring components including TWM, ICM, and TSMs to support smart irrigation control and promote water conservation. The requirement is structured as a subcontract under NAICS code 334516 and is open for responses until September 10, 2026. The equipment will be used to collect real-time environmental data for optimizing irrigation systems, reducing water waste, and enhancing resource efficiency across county-managed landscapes. The place of performance and specific delivery details are not fully defined in the posted data, but the system must be capable of reliable field operation and integration with existing or planned smart irrigation platforms. All proposals must meet technical specifications for accuracy, durability, and data transmission capabilities to ensure effective long-term monitoring and water management outcomes.
Putnam County Board of Commissioners

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334516
New
International
University of Calgary - Advanced Contract Award Notice / Notice of Proposed Procurement - Load Cell Dual Microhardness Tester System
Solicitation # AB-2026-05475
The University of Calgary is seeking to procure a fully integrated, load-cell-based micro/macrohardness testing system designed for automated Vickers and Knoop hardness measurements, with capabilities for spatial hardness mapping, advanced image analysis, automated reporting, and seamless data export. The system must deliver high-precision testing across a wide range of materials and hardness scales, supporting research and industrial applications through reliable, repeatable measurements and comprehensive data handling. The procurement is being conducted under solicitation number AB-2026-05475, with a response deadline of August 11, 2026, at 5:00 PM MT, and is currently at the presolicitation stage to gather industry input prior to full solicitation. The contract will be awarded by the University of Calgary, with performance expected to occur in Alberta, and all inquiries should be directed to Michael Oiring, Senior Procurement Specialist, via email or phone.
University of Calgary

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
Federal
Supply of Bio-Rad D-10 Hemoglobin Testing System with D-10 Rack Loader
261-NETWORK Contract Office 21 (36C261)

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
Electro-Mechanical Actuator Overhaul Services
Aviation Logistics Center (ALC)(00038)

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
Federal
Portable Threat-Detection Postal Scanner Supply
W7NF Uspfo Activity Mi Arng

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334516
New
Federal
Supply of Steris Autoclave Unit with AMSCO 600LS Steam SterilizerThe contract entails the procurement and delivery of a Steris Autoclave Unit equipped with an AMSCO 600LS Medium Steam Sterilizer, featuring an integrated steam generator that enables independent operation without reliance on external steam sources. This equipment is destined for the Boise VA Medical Center to enhance sterilization capabilities critical for medical safety and workflow efficiency. The unit must meet all technical and operational specifications to ensure reliable, compliant sterilization of surgical instruments and medical devices in a high-demand healthcare environment. The contract is classified as a subcontract under NAICS code 334516, indicating it pertains to medical equipment manufacturing. It was posted on August 4, 2026, with a response deadline set for August 7, 2026, suggesting a tight turnaround for submissions. The originating agency is the Department of Veterans Affairs through Rpo East (36C24E), and while specific performance location details are not provided, the delivery and installation are explicitly intended for the Boise VA Medical Center. The procurement supports the VA’s mission to maintain rigorous infection control standards by modernizing critical sterilization infrastructure.
Rpo East (36C24E)

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334516
New
Federal
Commercial Electrical Performance Monitoring System SupplyThe contract entails the supply of a commercially available electrical performance monitoring system designed for in-situ reliability testing of advanced packaging interposers, encompassing both an electrical analyzer and current-stress components necessary for comprehensive performance evaluation under operational conditions. The system must be fully functional, ready for immediate deployment, and capable of delivering precise, real-time data to assess the long-term reliability and integrity of interposer technologies used in high-performance electronic packaging. This subcontract, issued by the Department of Commerce NIST, has a response deadline of August 19, 2026, and was posted on August 4, 2026, under NAICS code 334516, which pertains to the manufacturing of electronic instrumentation. There is no set-aside designation, and the place of performance and point of contact details are unspecified, indicating flexibility in delivery and execution. The contract is intended to support advanced research and testing capabilities within the NIST framework, requiring the supplier to deliver a complete, integrated solution that meets defined technical requirements without customization or modification.
Department Of Commerce Nist

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334516
New
Federal
6640--Automated Osmometers with Service, Test Kits, and Supplies
Solicitation # 36C26226Q1265
The Department of Veterans Affairs is seeking to award a single Firm-Fixed Price Blanket Purchase Agreement for Automated Osmometers, along with associated preventative maintenance/service plans, test kits, and supplies, under solicitation number 36C26226Q1265. This is a full and open small business set-aside targeted at NAICS code 334516, with the intent to establish a five-year agreement consisting of five one-year ordering periods, all under FAR Part 12 for commercial items. The requirement is for two fully equipped Automated Osmometers to be delivered to the Southern Arizona VA Healthcare System in Tucson, with all pricing inclusive of shipping, installation, and service, and delivered FOB Destination. Offerors must strictly meet all salient physical, functional, and performance characteristics outlined in Attachment A, and demonstrate full compliance through detailed narrative or referenced documentation; failure to do so renders the offer non-responsive. The contract includes mandatory administrative requirements such as monthly invoicing via the Tungsten Network, designation of a BPA program manager, and strict delivery protocols enforced during standard and emergency hours. Submitted quotations must include completed attachments for the Statement of Work and Schedule of Pricing, with all green fields accurately populated to reflect offered products, annual volumes, package configurations, and unit costs per package. Offerors must also complete the Blanket Purchase Agreement Administration Data section, provide a valid Buy American Certificate, and include their SAM Unique Entity ID. All proposals must be submitted electronically to Samuel Han at Samuel.Han@va.gov no later than August 18, 2026, at 1:00 PM Pacific Time, with the solicitation number clearly stated in the subject line. Only the lowest-priced, fully responsive, and responsible offer that meets every salient characteristic will be selected without discussion, subject to funding availability and price reasonableness. The Government will evaluate total pricing including all options and reserves the right to cancel the solicitation if no acceptable offer is received or if offered prices exceed available funds. The BPA will be administered through a centralized contracting office, with orders placed by authorized personnel across designated VA facilities under VISN 22, subject to performance reviews and potential cancellation with thirty days’ notice for unsatisfactory performance.
262-NETWORK Contract Office 22 (36C262)

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334516
New
Federal
Sources Sought Optical Spectrum Analyzer
Solicitation # NB688000-26-02467
The National Institute of Standards and Technology (NIST) is conducting market research to identify vendors capable of supplying an Optical Spectrum Analyzer that meets specific technical requirements outlined in the attached specifications. This sources sought notice is not a solicitation, request for quotation, or binding commitment to award a contract; it is solely intended to gather information on potential suppliers before determining the appropriate acquisition method. Responses must include the company providing the product, the manufacturer’s name, and the country where the product is manufactured, along with capability statements limited to four pages containing product data sheets, typical lead times, and any additional relevant information. Proprietary information should be clearly marked, and no quotes will be accepted or considered at this stage. The requirement is classified under NAICS code 334516, with a small business size standard of 1,000 employees, and NIST is evaluating whether a small business set-aside opportunity exists based on responses received. All responsible sources—regardless of size—are encouraged to respond, but responses must demonstrate that the product can meet the stated specifications. The agency will use the collected information to inform future procurement decisions and determine if competition can be limited to small businesses if at least two qualified ones respond. Responses must be submitted electronically to Lisa Stevens at lisa.stevens@nist.gov no later than August 14, 2026, and must not include marketing brochures. The product’s country of origin is a critical piece of information for compliance and sourcing considerations.
Department Of Commerce Nist

POSTED

about 21 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334516
New
Federal
NOTICE OF INTENT TO SOLE SOURCE – Tunable Optical Parametric Oscillator
Solicitation # W911QX26QA204
The U.S. government intends to award a sole-source contract to Toptica Photonics Inc for one high-power Tunable Optical Parametric Oscillator (TOPO) with all-digital control electronics (DLC pro), as specified under solicitation W911QX26QA204. This acquisition is conducted under RFO FAR Part 12 as a Request for Quote with no competitive solicitation expected, although offers from other sources will be considered if received prior to the deadline. The item is required for delivery to White Sands Missile Range, New Mexico, with FOB destination terms, and no contract award will be made until appropriated funds become available. The NAICS code is 334516 with a small business size standard of 1,000 employees, though the set-aside is not applicable. All proposals must include business size certification and socioeconomic status disclosures, along with completed representations per FAR 52.212-3 and other applicable commercial item clauses. The contract incorporates numerous FAR and DFARS clauses addressing cybersecurity, supply chain security, labor practices, export controls, and federal compliance requirements, including Safeguarding Covered Defense Information, prohibitions on certain foreign telecommunications equipment, Buy American Act compliance, and anti-trafficking provisions. Specific local provisions and clauses outline point of contact details, inspection and acceptance procedures, payment instructions, tax exemption certification, and receiving room protocols at the delivery site. Contract financing is not permitted, and offers are due five days after the posting date, by 11:59 AM Eastern Standard Time. The government will evaluate proposals under the authority of FAR 6.103-1(c)(2)(i) for sole-source procurement, with primary oversight handled by the Adelphi Contracting Division and technical support provided at the Transformation Decision Analysis Center. Payment will follow electronic funds transfer procedures and must comply with all statutory and regulatory reporting obligations listed in the solicitation.
W6QK Acc-Apg Adelphi

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
Federal
Intent to Sole Source: CSU QuidelOrtho Reagent Supplies
Solicitation # 75H70926BAO-083-SN
The Billings Area Indian Health Service intends to award a sole source, firm fixed price contract to QUIDELORTHO SALES COMPANY, LLC for the supply of QUIDELORTHO Ortho Vision reagents specifically for use at the Crow Service Unit in Crow Agency, Montana. The base contract period runs from September 5, 2026, to September 4, 2027, with four optional one-year renewal periods beginning each subsequent September 5th, extending the potential performance period through September 4, 2031. The total estimated value of the contract is approximately $140,000. This procurement is justified under FAR 6.302-1 due to the proprietary nature of the reagents, which are protected by intellectual property rights held exclusively by QUIDELORTHO, making them the only viable source capable of meeting the agency’s technical and operational requirements for standardization, data center compatibility, and network security. No competition is being solicited, and any response to this notice must provide clear and convincing evidence that a competitive procurement would offer measurable advantages in cost, timeline, or mission effectiveness without compromising agency standards. Responses must be submitted exclusively via email to Contract Specialist Vincent Hansen at Vincent.Hansen@ihs.gov with the precise subject line: Notice of Intent Question Submission - CSU QuidelOrtho Reagent – 75H70926BAO-083-SN. Phone inquiries will not be acknowledged. The response deadline is August 11, 2026. This action is not a request for proposals or quotes, and the government will not assume any costs incurred by responders. The contract is classified under NAICS code 334516 and involves no set-aside provisions.
Billings Area Indian Health Svc

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333248
New
DIBBS
SCOOP, LABORATORY
Solicitation # SPE2DH-26-T-5776
The contract specifies the procurement of sterile, disposable, individually sealed laboratory scoops manufactured from polystyrene plastic, intended for retrieving samples from larger sources. The product is white in color and supplied in boxes of ten units each, with a total order quantity of three boxes. The items are classified under NSN 6640-01-722-5866 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the type of acquisition. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Delivery is required within twenty days after issuance, and performance will occur at APO 96278-2060. The solicitation, issued under SPE2DH-26-T-5776, was posted on August 4, 2026, with responses due by August 11, 2026. The contracting authority is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
All Other Industrial Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BRUSH, SURGICAL SCRU
Solicitation # SPE2DH-26-T-5787
The contract specifies the procurement of 4 packages, each containing 300 disposable surgical scrub brushes, for a total of 1,200 units. Each package must consist of 10 dispensers, with each dispenser holding 30 brushes, and all packaging must comply with commercial standards and be sealed to protect against damage during transit. The product must have a minimum shelf life of 24 months, with no more than three months elapsed between the manufacturer’s date and delivery to the government. All labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, following the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. The brushes are to be shipped in commercial exterior containers suitable for safe delivery via common carrier to Ellsworth AFB, South Dakota, with delivery required within 20 days of award. Suppliers must provide the source and part number for the product, and all items must conform to technical and quality requirements listed in the DLA Master List. The procurement is under solicitation SPE2DH-26-T-5787, with responses due by August 11, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PANEL, MODULAR, HANGING
Solicitation # SPE2DH-26-T-5768
The contract is for a single unit of a modular hanging trauma panel designated by NSN 6530-01-515-7651, intended for rapid deployment in combat trauma care during CASEVAC operations. Constructed of black Cordura nylon, the panel is MOLLE compatible and designed to integrate seamlessly with military aircraft, ground vehicles, and fixed or temporary facilities. It features a comprehensive internal layout including four full-width storage pockets, one half-panel bellos pocket, and a total of ten modular pockets—six small, two medium, one long, and one flat—each labeled with removable low-light visibility markings to ensure quick identification under low-visibility conditions. The panel itself is marked internally and externally with low-light readable "TRAUMA" identifiers and supports immediate access to essential medical supplies, enabling effective "tail gate" medical response anywhere on the battlefield. The procurement falls under DLA packaging requirements and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5768, issued on August 4, 2026, with bids due by August 11, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly identify the source and part number of the supplied item, and the purchase request number is 7017716143, with the unit of issue being each.
Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
FILM, PCR PLATE SEALING
Solicitation # SPE2DH-26-T-5795
Ultra-high optical clarity polyester sealing film designed for PCR plate applications features a medical-grade adhesive that provides strong, seamless sealing while remaining non-absorbing, non-fluorescent, and compatible with real-time PCR workflows. The film is heat resistant and certified for use across a broad temperature range from -40°C to 120°C, with certification as DNase-, RNase-, and nucleic-acid-free to ensure contamination-free performance in sensitive molecular biology applications. Each unit is sold as a box of 100 films, is non-sterile, and is identified by NSN 6640-01-695-8471. The procurement is governed by technical and quality requirements from the DLA Master List, with packaging and handling compliance dictated by DLA standards including the removal of government identification from non-accepted supplies. The solicitation SPE2DH-26-T-5795, issued by the Department of Defense’s Medical Supply Chain FSH, requires delivery within 20 days of order and is targeted to Langley AFB with a response deadline of August 11, 2026. The primary point of contact is Tina Vu, reachable via email and phone provided in the contract data.
Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CONTAINER, TRANSPORT, TH
Solicitation # SPE2DH-26-T-5785
The contract specifies the procurement of thermal transport containers designed for the stable field transport of blood, vaccines, reagents, and pharmaceuticals, maintaining a strict temperature range of 1 to 10 degrees Celsius for up to 96 hours without the need for ice or external power, with guaranteed performance for at least 48 hours in any environmental condition. Each unit is passive, includes a canvas cover with straps, a temperature indicator, and phase change material, and is colored in three-color woodland camouflage to meet military specifications. The container dimensions are 10 x 9 x 10 inches externally and 6 x 5 x 6 inches internally, with a tare weight of approximately 6.8 pounds per unit. The items are supplied under part number PBT01176 by PELI BIOTHERMAL LLC and must be marked in strict compliance with the Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129. Packaging and shipping must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, ensuring each unit is sealed and protected from damage, packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest rate, and shipped by traceable means—parcel post is prohibited. The contract is issued under solicitation SPE2DH-26-T-5785 with a total quantity of 3 units across four CLINs, each with a unit price ranging from $1.00 to $2.00, and a total price of $10.00. Delivery is required at destination FOB with no quantity variance allowed, and inspection and acceptance occur upon arrival. Required delivery dates are set for August 6 and 7, 2026, with a 20-day delivery window from the award date. All shipments must comply with DLA’s packaging and marking standards, and the supplies are not regulated by the FDA. The items will be delivered to multiple Department of Defense locations including Hurlburt Field, Florida and Nellis Air Force Base, Nevada, using designated freight addresses and military contact information. The contractor must specify the source and part number being supplied, and all documentation must reference the current DLA Master List of Technical and Quality Requirements as of the solicitation or award date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
WATER QUALITY ANALYSIS
Solicitation # SPE2DH-26-T-5603
The contract calls for the procurement of a single Water Quality Analysis Set, identified by NSN 6630-01-641-1591, designed as a portable laboratory solution for field testing of key water parameters including chlorine (0–3.4 mg/L), nitrate (0–40 mg/L), and the presence or absence of total coliforms and E. coli. The unit must include all necessary reagents for chemical analysis, a portable incubator, a thermometer, a pocket pH and TDS tester, and appropriate glassware, delivered as a complete, ready-to-use system. The item must have a shelf life of 12 months, with no more than two months elapsed between the date of manufacture and delivery to the government. Labeling must comply with Medical Marking Standard No. 1, clearly displaying the NSN, manufacturer name, CAGE code, date of manufacture, expiration or retest date, contract number, and lot number, and must include a machine-readable 2D Data Matrix barcode. Packaging must adhere to MIL-STD-2073-1E with packaging level B, using sealed unit containers and commercial shipping containers suitable for transport via common carrier, and preservation methods must follow coded standards without specific detailing. Delivery is required at APO AE 09094-3219 within 20 days after award, with FOB destination terms placing transport risk and cost on the contractor. The unit price for the single item is $5,086.00, and the solicitation, issued under SPE2DH-26-T-5603, remains open for response until August 7, 2026, with award anticipated through a possible automated process under simplified acquisition procedures. All contract clauses incorporate deviations for compliance with updated cybersecurity, labor, safety, and environmental regulations including NIST SP 800-171, DFARS cyber incident reporting, prohibitions on hazardous substances like hexavalent chromium and toxic materials, and requirements for employment eligibility verification, anti-trafficking, and sustainable products. Invoicing must be conducted exclusively through WAWF, with electronic submission mandated by DFARS provisions. The government retains the right to inspect and accept the delivered item at the destination under FAR 52.246-2, with no provisions for options or extended delivery windows. Offerors must provide their UEI and CAGE code, represent their small business status, and
Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339114
New
DIBBS
RUBBER DAM
Solicitation # SPE2DH-26-T-5788
The contract is for the procurement of rubber dams specifically identified as 6-inch non-latex Super Dam sheets, measuring 6 x 6 inches in teal green color, with each package containing 15 sheets. The item is listed under NSN 6520-01-717-7806 and is required in a single package quantity. The solicitation number is SPE2DH-26-T-5788, issued by the Department of Defense through the Medical Supply Chain FSH office, with a response deadline of August 11, 2026, and a required delivery within 20 days of award. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. The item may be subject to Covered Defense Information provisions, and bidders must clearly specify the source and part number being offered. Deliveries are to be made to the APO address with zip 09094-3219, and primary point of contact is Tina Vu at DLA.
Dental Equipment and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
RESTORATIVE KIT, DENTAL
Solicitation # SPE2DH-26-T-5581
The contract calls for the procurement of a dental restorative kit comprising 24 capsules of GC Fuji II LC, a light-cured, resin-reinforced material, with precise shade distribution: five each of A1, A2, A3, and B2 shades, and four of C2 shade, each containing 0.33 grams of powder and 0.085 milliliters of liquid. The entire order is for two kits, delivered within five days as directed by the government, with FOB destination terms placing freight and risk of loss on the contractor until delivery to the designated location in Suffolk, Virginia. All units must be packaged commercially with sealed unit containers protecting against damage, packed in suitable shipping containers for safe, low-cost delivery, and marked entirely in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical items. Shelf life is strictly mandated at 24 months, with no more than three months allowed to have elapsed from manufacture to government delivery, and all packaging must clearly display the date of manufacture, expiration or retest date, contract number, and lot number per MMS1A guidelines. Barcoding and durable, legible labeling are required, and all materials must meet hazard communication standards under OSHA, including submission of current Safety Data Sheets prior to award. The contract includes strict compliance requirements for hazardous material transport under 49 CFR, ICAO, IMDG, and DLA packaging directives, with certification and test reports retained for three years. Delivery is subject to destination inspection and acceptance by the government, with mandatory invoicing through Wide Area WorkFlow exclusively. The contractor must comply with safeguarding contractor information systems per NIST SP 800-171, abide by anti-trafficking and employment eligibility verification mandates, and ensure maritime shipments use U.S.-flag vessels unless waived. The NSN is 6520-01-644-3304, solicitation number SPE2DH-26-T-5581, and responses must be submitted via DIBBS by the August 4, 2026 deadline to Tina Vu at DLA Troop Support, with full adherence to technical and quality requirements from the DLA Master List.
Dental Equipment and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339113
New
DIBBS
CYLINDER, UNGRADUATED, L
Solicitation # SPE2DH-26-T-5803
The contract specifies the procurement of three ungraduated laboratory cylinders, each with a capacity of 600 milliliters, made from borosilicate glass with an outer diameter of 51 millimeters and an internal depth of 360 millimeters. These items are classified under the NSN 6640-01-459-4425 and must be delivered within five days of award. The purchase is part of a federal solicitation issued under contract number SPE2DH-26-T-5803, with a response deadline of August 11, 2026, and the solicitation was posted on August 4, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contracting office is under the Department of Defense's Medical Supply Chain FSH, with performance location in Pascagoula, Mississippi, and primary point of contact is Tina Vu, reachable via email and phone provided.
Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
POSITIONING BLOCK, H
Solicitation # SPE2DH-26-T-5805
The contract specifies the procurement of five sets of two positioning blocks for head support, designated as North American Rescue, LLC part number 50-0042 with NSN 6530-01-477-9448, to be used exclusively with the Rescue Sleeve II. Each unit must be black, washable, and packaged in sealed individual containers that protect against damage, with exterior shipping containers compliant with commercial standards to ensure safe, cost-effective delivery to Fort Campbell, Tennessee, within ten days of contract award. All items must be marked according to Medical Marking Standard No. 1, superseding MIL-STD-129, and comply with DLA packaging requirements. The item is classified as a critical application item and is not regulated by the FDA. Mercury or mercury-containing compounds are strictly prohibited unless functionally necessary in batteries or fluorescent lamps, which must then include a secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. Bidders must provide the source and part number, and delivery is FOB destination with zero variance allowed in quantity. Inspection and acceptance occur at the delivery point, and all documentation must align with the authorized DoD unit of issue as defined by ANSI X12.
Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 453998
New
DIBBS
STUDY CARD
Solicitation # SPE2DH-26-T-5772
The study card is a paper-based item measuring 5 inches by 4 inches, intended for use with the Explosive Ordnance Disposal Tool Kit identified by NSN 1385-01-565-1626. It is supplied as a single unit and is specifically tied to the part number 6910-01-612-6510 with a required quantity of one. The item is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which must be accessed online, and compliance is governed by the revision of the master document in effect at the time of solicitation or award depending on the acquisition size. The contract includes a requirement for the removal of government identification from non-accepted supplies. This solicitation, identified by SPE2DH-26-T-5772, was posted on August 4, 2026, with a response deadline of August 11, 2026. The purchase request number is 7017726970, and delivery is expected within 20 days after order placement. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with performance required at Camp Lejeune, North Carolina, 28542. All inquiries should be directed to Tina Vu at the provided contact information. The NAICS code for this procurement is 453998, and the full solicitation details are accessible through the DIBBS portal.
All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
WATER SAMPLING TEST KI
Solicitation # SPE2DH-26-T-5784
The contract specifies the procurement of a water sampling test kit for chlorine, sufficient to perform 100 tests, with the model designation CN-67 and NSN 6640-01-202-5457. Each unit must have a 24-month shelf life, and no more than three months may have passed from the date of manufacture to the date of delivery to the government. Labels on the product must clearly display the NSN, manufacturer, CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The requirement is governed by technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA procurement standards, and the product is subject to covered defense information controls. Government identification must be removed from any non-accepted supplies. The purchase request number is 7017720933 for one unit, with delivery due within 20 days of award. The solicitation number is SPE2DH-26-T-5784, issued on August 4, 2026, with responses due by August 11, 2026. The contracting office is under the Department of Defense, Medical Supply Chain FSH, and performance is required at Offutt AFB, Nebraska. Primary point of contact is Tina Vu, reachable via email and phone provided.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details