Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Mechanical Puller Fabrication and Supply

Active

Federal

Response Deadline09/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Mechanical Puller Fabrication and Supply involves the manufacture or sourcing of completed mechanical pullers for prime contractors supporting the Department of Defense ASC Commodities Division. The contractor must adhere to the DLA Master List of Technical and Quality Requirements RA001 and ensure all items are packaged according to RP001 DLA Packaging Requirements. Quality sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331 Table 1, and the provider must maintain compliance with DFARS 252.204-7016. The project falls under NAICS code 332710 and is to be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026. The final deliverable is a finished, sampled, and packaged mechanical puller that meets all specified technical and regulatory standards.

General Info

Subcontract for mechanical puller fabrication and supply for DoD ASC Commodities Division.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-29NQ.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PULLER, MECHANICAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 14

subcontract

Response DeadlineSep 22

Submission deadline

Response Deadline

09/22/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a completed mechanical puller for prime contractors delivering DLA supply contracts. Manufactures or sources the item per the DLA Master List of Technical and Quality Requirements (RA001). Performs quality sampling per MIL-STD-1916 or ASQ H1331, Table 1, and packages items according to RP001 DLA Packaging Requirements. Requires compliance with DFARS 252.204-7016. Delivers the finished, sampled, and packaged mechanical puller.

Similar Contracts

Same NAICS industry code

Manufacturing of Mixer Assembly (NSN 1560012584386)This subcontract involves the manufacture and assembly of two Mixer Assemblies (NSN 1560012584386) for prime contractors on Department of Defense projects. The production must strictly adhere to Basic Drawing NR 78286 70400-02287 Revision C and associated reference drawings SS8442 Rev 6, 70400-02287 Rev G, and 70009-03001 Rev T. All units must be produced using precision machining tools, as additive manufacturing is explicitly prohibited. The project is managed under the ASC Supplier OE and AF Div of the Department of Defense and is classified under NAICS code 332710. Compliance with DFARS 252.223-7008 and Export Control regulations is mandatory. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline of September 22, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Precision Machining: Elbow, Boss (F/A-18 Application)This subcontract involves the precision machining of Elbow and Boss components for F/A-18 applications, supporting prime contractors for DLA Land and Maritime aerospace parts. The project requires the production of 20 machined units using Type 304 Stainless Steel, utilizing CNC milling and turning to achieve specific female and male threads along with a detonating cord groove. The manufacturer must be capable of producing Navy Identified Critical Safety Items to strict aerospace tolerances. This work is managed by the Fluid Handling Division of the Department of Defense and is to be performed in San Diego, California.

FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Actuator Shaft Assembly ManufacturerThis subcontract involves the manufacture and supply of 10 actuator shaft assemblies for prime contractors supporting Department of Defense supply contracts. The work requires precision machining and assembly using CNC machines and lathes to ensure all components meet specific technical data package tolerances. To maintain high standards of production, the manufacturer must implement a quality inspection system that is fully compliant with ISO 9001:2015. The contract is managed by the ASC Supplier Oper AE and AF Division under NAICS code 332710, with the place of performance located in New Cumberland. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Supply of Bell Cranks (NSN 3040011085345)This subcontract involves the supply of 11 Bell Cranks for prime contractors under Defense Logistics Agency supply contracts. The provider is responsible for manufacturing or sourcing parts according to NSN 3040011085345 technical data while ensuring strict compliance with RA001 quality requirements. All items must be packaged according to MIL-STD-2073-1E and RP001, with marking performed per MIL-STD-129. Delivery is set as FOB Origin, with the place of performance located in New Cumberland, Pennsylvania. The contract falls under NAICS code 332710 and is managed by the Department of Defense Land Supply Chain.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Bare Item Marking and Physical Identification ServicesThis subcontract opportunity with the ASC Commodities Division of the Department of Defense involves providing specialized physical identification and bare item marking services for prime contractors. The selected provider will apply permanent markings to aircraft components using chemical etching, stamping, or industrial laser etching, ensuring all work adheres to specification RQ017. All marked items must be delivered in a state ready for First Article Testing and government inspection. The project is designated as a Total Small Business Set-Aside under NAICS code 332710 and will be performed at Hill AFB. Interested parties must submit their responses by September 22, 2026, following the posting date of September 14, 2026.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Supply of Valve Disk Guides (NSN 4820-01-315-4114)This subcontract involves the manufacture and supply of 109 valve disk guides for prime contractors supporting the Department of Defense Nuclear Reactor Program. The contractor is responsible for producing or sourcing hardware that adheres to the technical specifications of NSN 4820-01-315-4114 using precision machining equipment. All items must be packaged according to RP001 DLA Packaging Requirements for Procurement to ensure compliance with agency standards. The project falls under NAICS code 332710 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026. This agreement ensures the delivery of critical components to the Defense Logistics Agency for use in nuclear reactor systems.

NUCLEAR REACTOR PROGRAM

POSTED

about 19 hours ago

DEADLINE

Rigid Connecting Link FabricationThis subcontract involves the precision machining and fabrication of 29 rigid connecting links for prime contractors supporting DLA Aviation supply contracts. The manufacturer is required to use aviation-grade alloys to meet the technical specifications for NSN 3040014328239, ensuring full compliance with aviation quality standards and domestic origin requirements. Managed by the Department of Defense under the ASC Supplier Oper OEM Division, the project falls under NAICS code 332710. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Precision Component Supply for ActuatorThis subcontract for the DDSP New Cumberland Facility involves the supply of raw materials and precision-machined sub-components, including gears, housings, and electrical coils, for actuator projects. The provider is responsible for sourcing and delivering aerospace-grade or industrial-grade metals and electrical windings according to specific technical drawings, while ensuring all deliveries are accompanied by material certifications and Mill Test Reports. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by September 25, 2026, following the posting date of September 14, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Straight Shaft (NSN 3040-00-225-2214)This subcontract involves the precision manufacturing of a straight shaft identified by NSN 3040-00-225-2214 for prime contractors supporting Department of Defense supply contracts. The work is managed under the Land Supplier Operations Vehicle Support agency and requires strict adherence to the DLA Master List of Technical and Quality Requirements. The production process utilizes CNC lathes and milling machines to ensure all dimensions and tolerances meet specific technical standards. The final deliverable is the completed straight shaft, with the project falling under NAICS code 332710.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Spacer Plates (NSN 5365005336657)This subcontract with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the manufacturing of 394 precision spacer plates under NSN 5365005336657. The production must adhere to TDP Rev B Gen 3 and Basic Drawing NR 19207 11683964 Revision NR C, utilizing CNC milling and turning equipment to ensure zero-defect tolerance in accordance with Critical Application Item quality standards. The project is categorized under NAICS code 332710 and will be performed in Phoenix, Arizona. Interested parties must respond by September 22, 2026, following the solicitation posted on September 14, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Shaft Retaining Plate SupplierThis subcontract opportunity is for the manufacture or sourcing of shaft retaining plates, specifically part NSN 3040016003934, to support prime contractors delivering DLA Land and Maritime supply contracts. The supplier must ensure all parts are produced according to government material specifications and technical standards, with the physical delivery of the plates being the primary requirement. Performance will take place in Fort Riley, and the contract falls under NAICS code 332710 for the Department of Defense. To be eligible and facilitate payment, the supplier must be registered in the System for Award Management and the Wide Area Workflow for invoicing purposes. The solicitation was posted on September 14, 2026, with a response deadline of September 25, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

Supply of NSN 7018-14-765-7 ComponentsThis subcontract involves the supply of 30 hardware components identified by NSN 7018-14-765-7 for prime contractors under the Defense Logistics Agency. The provider is responsible for manufacturing or sourcing these items according to technical data from the DLA portal, with a strict requirement to comply with DFARS 252.223-7008 regarding the prohibition of Hexavalent Chromium. All deliverables must adhere to MIL-STD-129 marking and MIL-STD-2073-1E packaging standards. The contract is managed by the ASC Supplier Oper AE and AF Div within the Department of Defense, falling under NAICS code 332710. Performance of the contract is centered in Fort Wainwright, Alaska. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Manufacture and Supply of Close Tolerance Screws (NAS7103-8)This subcontract involves the manufacture and supply of 286 precision-engineered close tolerance screws, specifically NSN 5305014358742, for prime contractors supporting DLA Aviation supply contracts. The items must be produced to NAS7103-8 standards, ensuring 3A and 3B thread dimensional conformance in accordance with FFD-STD-H28/20 System 22. The project requires the use of precision threading and inspection equipment to meet strict technical specifications. All items must undergo bare item marking per MIL-STD-130N and be packaged according to ASTM D3951. This requirement is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in New Cumberland, Pennsylvania.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Cotter Pins (NSN 5315016406621)This subcontract involves the manufacture or procurement of two cotter pins meeting NSN 5315016406621 specifications for prime contractors delivering to DLA Aviation. The work is managed by the Department of Defense under the ASC Commodities Division, with performance taking place in Havelock, North Carolina. The contractor is responsible for ensuring all items meet quality control standards per FAR 52.246-1 and adhere to RP001 DLA Packaging Requirements for Procurement. Final delivery of the units will be handled via Government-Arranged Transportation.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Fastener Receptacles (NSN 5325017031698)This subcontract with the Department of Defense ASC Commodities Division involves the procurement or manufacture of 15 specialized fastener receptacles, specifically part number IT147R4-7 from Avibank Mfg., Inc. The contractor is responsible for physical identification and bare item marking according to RQ017 standards, as well as the removal of non-accepted government identification per RQ011. All deliverables must adhere to MIL-STD-129 and RP001 packaging standards. The final shipment of 15 units is to be delivered to Fort Carson, Colorado. The contract falls under NAICS code 332722 and is associated with National Stock Number 5325017031698.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Needle Roller Bearing Supplier (NSN 3110-01-703-1319)This subcontract with the Department of Defense ASC Commodities Division involves the supply of seven needle roller bearings, specifically NSN 3110-01-703-1319, for prime contractors on DLA Aviation ASC projects. The parts must not be produced via additive manufacturing and are to be delivered FOB Origin from New Cumberland. The supplier must comply with strict quality and logistics standards, including physical identification and bare item marking per RQ017, as well as packaging requirements outlined in RP001 and MIL-STD-2073-1E. The contract falls under NAICS code 332991 and was posted on September 14, 2026, with a response deadline of September 22, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 19 hours ago

DEADLINE

Manufacture and Supply of Shoulder Screws (NSN 5305-00-136-6157)This subcontract involves the manufacture and supply of precision-machined shoulder screws under NSN 5305-00-136-6157 for the Department of Defense, specifically the ASC Commodities Division. The contractor is responsible for fabricating hardware using CNC lathes and milling machines while ensuring strict adherence to Engineering Support Activity standards and the DLA Master List of Technical and Quality Requirements. Completed components are to be delivered to the designated government facility at Hill AFB. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722. It was posted on September 14, 2026, with a response deadline of September 22, 2026. This contract focuses on providing high-specification hardware to prime contractors supporting DLA supply operations.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Bolts (NSN 5306-00-5826419 / Part AN178-23A)This subcontract through the ASC Commodities Division of the Department of Defense involves the manufacture or procurement of 22 specialized bolts, identified as NSN 5306-00-5826419 and Part AN178-23A. The items must be produced according to FED-STD-H28/20 System 22 and TDP Rev C Gen 3, with inspections conducted per MIL-STD-1916 or ASQ H1331. Performance takes place at Fort Campbell, and the contract requires strict adherence to DFARS 252.225-7001 and MIL-HDBK-57 symbol registration. All units must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The opportunity was posted on September 14, 2026, with a response deadline of September 22, 2026. This procurement falls under NAICS code 332722 and is intended for prime contractors supporting Defense Logistics Agency supply contracts.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-01-661-2481)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of 12,000 socket head cap screws conforming to NSN 5305-01-661-2481. These components are intended for prime contractors delivering DLA supply contracts to the Portsmouth Naval Shipyard. The delivery terms are established as FOB Origin. The contractor is required to adhere to strict military standards for marking and packaging, specifically MIL-STD-130N for item marking, MIL-STD-129 for shipment marking, and MIL-STD-2073-1E and RP001 for packaging. The project falls under NAICS code 332722 and is to be performed in Portsmouth, zip code 03801-5000.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of PIN-RIVET (NSN 5320010562209)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture or sourcing of 1,991 PIN-RIVET units meeting NSN 5320010562209 specifications. The contractor is responsible for delivering these components to prime contractors, ensuring all items are packaged according to RP001 and marked per RQ017 and RQ011 standards to meet DLA requirements. The project falls under NAICS code 332510 and is to be performed at Hill AFB. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Cable Assembly Supply (NSN 5995-01-707-7986)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture or sourcing of two specialized cable assemblies identified by NSN 5995-01-707-7986. The supplier is responsible for ensuring all units are marked and packaged according to MIL-STD-129 and must maintain strict compliance with DFARS 252.204-7016 concerning covered defense telecommunications equipment. The project falls under NAICS code 335931 and is to be performed in Virginia Beach. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services, issued by the Department of Defense ASC Commodities Division, requires the specialized packaging, marking, and palletization of items for prime contractors on DLA supply contracts. The service provider must ensure all work adheres to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 and DLA requirements for palletization. Key technical requirements include the application of Hazard Warning Labels according to 29 CFR 1910.1200 and the use of UV-protective packaging for items under FSC 5330 and 5331. The final deliverable is a fully packaged, marked, and palletized shipment. This opportunity falls under NAICS code 561910, with a response deadline of September 22, 2026.

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Supply of Northrop Grumman P/N 156C604H01This subcontract through the Department of Defense ASC Commodities Division involves the supply of one unit of Northrop Grumman Systems Corporation part number 156C604H01 for prime contractors on DLA supply contracts. The part must be manufactured or sourced according to TDP Rev A Gen 1 and Federal Supply Classifications 5330/5331, with delivery terms set as FOB Origin. The contractor is required to adhere to strict quality and identification standards, including physical identification and bare item marking per RQ017 and inspection according to MIL-STD-1916 or MIL-STD-105/ASQ Z1. Additionally, the delivery must comply with MIL-STD-129. The opportunity falls under NAICS code 336413, with a response deadline of September 22, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Straight Headed Pins (NSN 5315009570757)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 59 units of straight headed pins meeting NSN 5315009570757 specifications. The contractor is responsible for manufacturing or sourcing the pins and ensuring all deliverables adhere to strict quality and logistics standards, including packaging per ASTM D3951, marking and labeling per MIL-STD-129, and palletization according to RP001. The project falls under NAICS code 332510 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 22, 2026, following the solicitation posted on September 14, 2026.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS