Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Mechanical Stop Component Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of a mechanical stop component identified by NSN 5340013957423 and PR 7014810095 under an as-needed delivery order structure, ensuring flexibility in procurement timelines and quantities based on operational demands. This tangible hardware item must be manufactured in full compliance with applicable military specifications to meet rigorous defense standards. The procurement is executed as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 332510 indicating classification within other fabrication industries. Deliveries will be triggered by future requirements, and the performance location and point of contact details are not specified, suggesting centralized management through DLA systems. The solicitation was posted on July 17, 2026, and the contract is accessible via the DIBBS portal using the provided UI link for official documentation and tracking.

General Info

Supply of NSN 5340013957423 mechanical stop under DLA subcontract per military specs, as-needed deliveries.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of a mechanical stop component with NSN 5340013957423 and PR 7014810095 under an as-needed delivery order structure. This is a tangible hardware item requiring production to applicable military specifications.

Similar Contracts

Same NAICS industry code

Solicitation # SPE4A6-26-T-10GC

The contract pertains to the procurement of PIN-RIVET items with the NSN 5320-00-971-9153, requiring a total quantity of 178 units to be delivered within 42 days of contract award. All items must comply with stringent sampling requirements mandating adherence to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances accepted unless otherwise stated, and critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Packaging must conform to ASTM D3951 unless overridden by DLA Master List requirements, with all packaging and labeling strictly following MIL-STD-129, including palletization per RP001. Items must be marked with government identification as specified, and any non-accepted supplies must have government identifiers removed. The delivery is FOB origin, inspection and acceptance occur at destination, with no variance allowed in quantity. The specified shipping address is the DLA Distribution San Joaquin facility in Tracy, CA, and transportation follows DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-10GC with a required delivery date of April 25, 2026, and unit price of $178.00 per EA for a total contract value of $31,684. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or amendment dates.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

CLIP, SPRING TENSION

Solicitation # SPE7L1-26-T-890C

Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds lowered to $150,000, and must disclose any non-domestic materials in their quotations. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and no items produced via additive manufacturing may be submitted unless prior approval is granted. Quotations must include quantity ranges due to fluctuating demand, as manual evaluation allows for flexible requirement aggregation or reduction without resolicitation, though this does not apply to Auto IDC. Small business joint ventures must submit specific certifications under FAR provisions for eligibility categories. All vendors must register through the upcoming AMPS system to access the Vendor Shipment Module and maintain shipping capability, with WebServices users required to update their schema by specified deadlines. Offerors anticipating submission after the closing date must file a “No Bid” on DIBBS with an anticipated quote date or reason to avoid unnecessary follow-ups. Fast Pay is not applicable to this solicitation. The item in question is a spring tension clip with NSN 5340-01-192-2048, quantity 15 units, requiring delivery within 57 days to Tinker AFB, with Robert Warne as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

PIN, STRAIGHT, HEADLE

Solicitation # SPE4A6-26-T-10GR

The contract solicitation SPE4A6-26-T-10GR requires four straight headless pins with NSN 5315-01-400-3809 for delivery within 128 days to Tracy, CA, under the Department of Defense’s Defense Logistics Agency. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The items must comply with stringent packaging, marking, and identification standards including the removal of government identification from non-accepted supplies and bare item marking per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and attributes are assigned verification levels or AQLs based on classification, with unspecified attributes treated as major. Configuration changes require formal engineering change proposals or variance requests, and manufacturers must submit source approval documentation per RC001. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Only contractors with approved US/Canada Joint Certification Program status, completion of DOD export-controlled data training, and DLA authorization may access the technical data. Cybersecurity requirements mandate CMMC Level 2 compliance through either a self-assessment or third-party assessment by a certified C3PAO, and covered defense information handling is mandatory. All documentation, inspection, and acceptance activities must occur at the manufacturer’s facility per RQ009, and the procurement falls under NAICS 332510 for metal stamping and forging. Primary point of contact is Christopher Montgomery of the ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

DISK, SOLID, PLAIN

Solicitation # SPE7L1-26-T-890T

The contract is for the procurement of 4,728 solid plain disks with NSN 5340-01-229-3826 under solicitation SPE7L1-26-T-890T, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 182 days after contract award, with responses due by August 10, 2026. The item falls under NAICS code 332510 and is subject to DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The supply must comply with strict prohibitions against intentional addition or direct contact of mercury or mercury-containing compounds, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Additionally, the technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with valid US/Canada Joint Certification Program certification, completed DOD export training, approved DLA questionnaire responses, and formal DLA authorization. The place of performance is New Cumberland, Pennsylvania, with Brandon Pesicek as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

LEVER, MANUAL CONTRO

Solicitation # SPE7L1-26-T-888R

This contract pertains to the procurement of one manual control lever, identified by NSN 5340-01-082-4079 and part number 142D5220, under solicitation SPE7L1-26-T-888R. The item must be delivered within 20 days to the destination specified as APO AP 96264-2025, with FOB destination terms, zero tolerance for quantity variance, and final inspection and acceptance occurring at the delivery point. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, using approved materials and procedures, and no special marking is required. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements, and requires prior approval for any substitute chemicals. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to Covered Defense Information provisions and must adhere to DLA packaging and transportation guidelines, including references to DLAD Proc Notes C19 and C20 for shipping logistics. The supply is designated for the Department of Defense through the Land Supply Chain, with delivery directed to Kunsan Air Base in South Korea for receipt, and the contracting officer is Kristina Derry. The unit of issue is each (EA), with a total price based on a unit price of one dollar. The procurement falls under NAICS code 332510 and is classified as a federal solicitation with no set-aside designation. The response deadline is August 10, 2026, and the original required delivery date is July 27, 2026. Government-specific identifiers and distribution codes are provided for internal tracking, and all submissions must conform to the DoD unit of issue standards as outlined in the official DLA reference. The contract mandates strict adherence to technical compliance, environmental restrictions, and logistics protocols throughout the fulfillment process.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

PLUNGER, QUICK RELEA

Solicitation # SPE7L1-26-T-889F

The contract solicitation pertains to the procurement of 28 units of a PLUNGER, QUICK RELEA with NSN 5340-00-565-3198 under solicitation number SPE7L1-26-T-889F. The item is subject to strict export control regulations due to the presence of technical data governed by either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any export or disclosure to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD training on handling export-controlled technical data and have been formally approved by the Defense Logistics Agency. The delivery timeline is set for 20 days after award, and the solicitation, issued by the Department of Defense’s Land Supply Chain under NAICS code 332510, has a response deadline of August 10, 2026. Only vendors meeting all specified compliance and certification criteria may submit proposals, with point of contact Kristina Derry available for inquiries via provided email and phone.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

PIN, STRAIGHT, HEADLESS

Solicitation # SPE4A6-26-T-10FX

The contract is for the procurement of two straight headless pins, identified by NSN 5315-00-177-0820, under solicitation SPE4A6-26-T-10FX, with a response deadline of August 6, 2026, and a required delivery within 20 days after order. The item is being sourced as fully competitive under a military or federal specification, and item unique identification is not required, as specified by DFARS 252.211-7003(c)(1)(i). Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless an amendment supersedes it. Packaging must comply with DLA requirements, government identifiers must be removed from non-accepted supplies, and bare items must be physically marked as per RQ017. Covered defense information may apply, and all performance is directed under the Department of Defense, specifically the ASC Commodities Division, with Sarah Henderson as the point of contact.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7L2-26-T-0580

The contract pertains to the procurement of a mounting bracket identified by NSN 5340-01-727-9919 and part number 17211019, with a quantity of eight units required under purchase request 7017439142. The deliverable must be shipped FOB origin with a delivery timeline of 147 days, arriving at the designated DLA distribution facility in New Cumberland, Pennsylvania, and is subject to zero variance in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s master technical and quality requirements, including MIL-STD-129 for marking and labeling, and either ASTM D3951 for non-hazardous materials or FED-STD-313’s IP025 if classified as hazardous, with DLA requirements taking precedence over ASTM. Palletization must adhere to DLA packaging standards, and the unit of issue is each, priced at $8.00 per unit for a total contract value of $64.00. The solicitation number is SPE7L2-26-T-0580, issued under NAICS code 332510, with a response deadline of August 10, 2026, and a need ship date of January 5, 2027, while the original required delivery date is March 29, 2027. Technical compliance and quality controls are governed by the DLA Master List of Technical and Quality Requirements as referenced and enforced under the procurement term.

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-889A

The contract pertains to the procurement of a single bumper identified by NSN 5340-01-663-1092 under solicitation SPE7L1-26-T-889A, with a required delivery within 20 days after ordering. The procurement is subject to full and open competition and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. Configuration changes require formal engineering change proposals and variance requests, while export control regulations governing ITAR or EAR apply to associated technical data, which may not be disclosed to foreign persons without authorization. Access to such controlled data is restricted to contractors holding approved US/Canada Joint Certification Program status, having completed mandatory DOD export control training, and obtaining DLA approval. The purchase is managed by the Department of Defense’s Land Supply Chain under NAICS code 332510, with performance directed to Huntsville, Alabama, and all inquiries should be directed to Kristina Derry at the provided contact information.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

PIN, STRAIGHT, HEADLE

Solicitation # SPE7M4-26-T-290V

The contract pertains to the procurement of a pin, straight, headless item with NSN 5315-01-164-5823 and part number 19221-1, supplied by EATON AEROSPACE LLC, under solicitation SPE7M4-26-T-290V. One unit is required to be delivered within 20 days FOB origin, with no tolerance for quantity variance. All deliveries must be made to the specified military receiving location at Fort Irwin, California, using the fastest traceable shipping method—parcel post is prohibited. Packaging must comply with ASTM D3951, while marking and labeling are governed by MIL-STD-129 and the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. The item is classified as a critical application product and must be marked in accordance with MIL-STD-130N. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitute chemicals require prior approval unless explicitly permitted by the specification. The unit of issue is each, and palletization must adhere to DLA’s packaging requirements. Delivery is due by July 27, 2026, and all government-specific identifiers and codes, including the RDD, DODAAC, and procurement request numbers, must be accurately applied to the shipment for proper tracking and receipt.

FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-890Q

The contract pertains to the procurement of 8 units of COVER, ACCESS with NSN 5340-12-369-0960 under solicitation SPE7L1-26-T-890Q, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 110 days after award, and responses must be submitted by August 10, 2026. This is classified as a commercial item procurement and is subject to the DLA Master List of Technical and Quality Requirements, which incorporates all referenced technical and quality standards identified by R or I numbers. Sampling procedures must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major unless otherwise dictated by governing documents. MIL-STD-105/ASQ Z1.4 may be used for determining sample size but requires zero non-conformances unless the contract states otherwise. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except in specific applications such as batteries, fluorescent lights, sensors, weapon systems, and authorized chemical reagents, where two layers of containment are required for portable devices. All items must be marked in accordance with MIL-STD-130N, and the place of performance is specified as Texarkana, TX, with Geoffrey Feicht designated as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

SEAT, BALL SOCKET

Solicitation # SPE7L1-26-Q-1391

The contract is for the procurement of 124 units of a seat, ball socket with NSN 5340-00-361-3510 under solicitation SPE7L1-26-Q-1391, which is a total small business set-aside as defined by FAR 19.5. The solicitation was posted on July 29, 2026, with responses due by August 14, 2026, and delivery is required within 404 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA requirements, and all government identification must be removed from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be submitted for approval unless explicitly authorized by the specifications. The item involves technical data subject to export control under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal DLA authorization. Performance is to be delivered to New Cumberland, Pennsylvania, with the primary point of contact being Brandon Pesicek of the Department of Defense, Land Supply Chain, and the NAICS code is 332510 for forging and stamping.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-158J

A safety relief valve is being procured under contract SPE7MC-26-T-158J by the Defense Logistics Agency for delivery to the USS BOXER LHD 4 at FPO AP 96661, with a required delivery date of July 27, 2026. The contract specifies two identical items, each priced at $1.00, with no variance allowed in quantity, and delivery must be made FOB destination within 20 days. The valve has a carbon steel body with flanged end connections and must comply with strict environmental and safety standards, including a complete prohibition on ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except where explicitly permitted for functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization adhering to DLA’s packaging requirements, and all materials must be properly identified using the assigned NSN 4820013387425. The contract references the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications, and the procurement is a total small business set-aside under NAICS code 332911, with submissions directed to DLA and managed via the DIBBS system.

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

SLEEVE, RETAINER

Solicitation # SPE8E8-26-T-4911

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 15 hours ago

DEADLINE

BANDAGE, ELASTIC

Solicitation # SPE2DS-26-T-284F

POSTED

about 15 hours ago

DEADLINE

TRICON, FREIGHT, SPEC

Solicitation # SPE8ED-26-Q-0603

The contract pertains to the procurement of TRICON, FREIGHT, SPEC with the NSN 8150-01-533-8673, under Purchase Request 7017400576 for a quantity of 40 units. It is issued as a solicitation by the Defense Logistics Agency under the Department of Defense, with solicitation number SPE8ED-26-Q-0603. The solicitation was posted on July 29, 2026, and responses are due by August 5, 2026, providing potential vendors a one-week window to submit proposals. The contract does not specify a set-aside type or NAICS code, and no geographic point of performance or contact information is provided in the data. All activity is managed through the DIBBS platform, with the official solicitation page accessible via the provided link.

POSTED

about 15 hours ago

DEADLINE

DRESSING, OCCLUSIVE, ADH

Solicitation # SPE2DS-26-T-284U

The contract solicitation is for an occlusive adhesive dressing identified by NSN 6510-01-234-8943, with a single-unit purchase request numbered 7017660495. The solicitation, issued under number SPE2DS-26-T-284U by the Defense Logistics Agency under the Department of Defense, was posted on July 29, 2026, and requires responses no later than August 4, 2026. The procurement is classified as a federal solicitation with no specified set-aside type or NAICS code, indicating it is open to general federal contractors. The place of performance and point of contact details are not provided, but the solicitation can be reviewed through the official DIBBS portal using the provided UI link.

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

LIGHT SPECIAL PURPO

Solicitation # SPE8E7-26-Q-0270

The contract specifies the procurement of item 6220-01-549-4174, identified as LIGHT SPECIAL PURPO, with a total quantity of 110 units distributed across eight line items ranging from 2 to 29 units each. All deliveries must comply with a strict zero percent variance in quantity and are subject to inspection and acceptance at the destination point. Delivery is required within 30 days after order date, with free on board terms originating from the supplier’s location. Packaging must adhere to MIL-STD-2073-1E standards with specific preservation methods, unit containers, and packing levels, while marking must fully comply with MIL-STD-129 without any special labeling. Palletization must conform to DLA Packaging Requirements for Procurement (RP001), and hazardous material handling is governed by IP025, which mandates packaging per FED-STD-313 and TQ requirement IP025 if deemed hazardous; otherwise, commercial packaging under ASTM D3951 is acceptable, with all DLA Master List requirements taking precedence. The supplies are destined for multiple U.S. military and foreign military locations, including Royal Jordanian Air Force and U.S. Army bases in Hawaii and Jordan, with freight and marking instructions tied to specific TCN and RDD identifiers. The contract is issued under solicitation SPE8E7-26-Q-0270 by the Defense Logistics Agency, referencing the DLA Master List of Technical and Quality Requirements for all technical and quality specifications.

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8ES-26-Q-0090

This procurement under solicitation SPE8ES-26-Q-0090 is for enamel designated by NSN 8010-00-286-7749 in quantities of four and two containers, each containing five gallons, for delivery to Diego Garcia and other government locations. The contract requires strict compliance with Department of Defense packaging, marking, and shipping standards including MIL-STD-2073-1E and MIL-STD-129, with special handling for Type II shelf-life items that must retain at least 85% of their 24-month shelf life upon receipt. The product must originate from manufacturers approved on both the Qualified Products List and the Approved Products List maintained by the Performance Review Institute and Master Painters Institute respectively, and must conform to MPI #9 Revision D dated 05/01/2014. Hazardous material shipping requirements are governed by OSHA’s revised Hazard Communication Standard, mandating submission of Safety Data Sheets and compliant labels prior to award, along with employee training on the Globally Harmonized System. This acquisition is conducted under simplified procedures authorized by 41 U.S.C. 1901 and Class Deviation 2026-O0028, with firm fixed pricing and zero tolerance for quantity variance. Delivery is required within 60 days after issuance of the order, with inspection and acceptance occurring at origin. The item is subject to Controlled Unclassified Information (CUI) requirements, and if Covered Defense Information or export-controlled technical data is involved, the contractor must comply with DFARS clauses 252.204-7012, 252.204-7019, and 252.204-7020. Noncompliance with CUI, shelf-life, packaging, or approval list requirements may lead to cancellation of purchase orders. All markings must reflect special code 33 for Type II shelf life and adhere to MIL-STD-129, with freight addressed to FPO AP 96595-0004 and specific shipping instructions governed by DLAD procedural notes.

Paint and Coating Manufacturing

POSTED

about 15 hours ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-3922

This contract issued by the Defense Logistics Agency under solicitation number SPE8E6-26-T-3922 specifies the procurement of two units of a marker and identifier with NSN 7690998418549 and part number 187-5558, priced at $0.00 per unit for a total of $0.00, with delivery required within five days of award. The item must be delivered FOB origin and inspected and accepted at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and palletization adhering to DLA’s Packaging Requirements for Procurement, which supersede any conflicting standards. The DLA Master List of Technical and Quality Requirements governs all technical specifications, and all supplies must be marked and labeled according to government standards, with government identification removed from non-accepted items. The shipment must be sent via traceable means, excluding parcel post, to the designated delivery point in Sioux City, Iowa, with the same address used for marking and freight. The contract references specific DLA directives including RP001 and RD003, and includes a provision for covered defense information. The required delivery date is July 24, 2026, with a solicitation response deadline of August 10, 2026, and the contract is classified under NAICS code 323111 for federal procurement.

Commercial Printing (except Screen and Books)

POSTED

about 15 hours ago

DEADLINE

SUCTION UNIT, AIRWAY KI

Solicitation # SPE2DS-26-T-284B

The contract solicitation is for a Suction Unit, Airway KI with NSN 6515-01-364-1047, under purchase request 7017673928 for a quantity of two units. It is issued by the Defense Logistics Agency under the Department of Defense through solicitation number SPE2DS-26-T-284B, with the posting date of July 29, 2026, and a response deadline of August 4, 2026. The solicitation is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not specified, though the country code is listed as the United States. Interested parties can access the full solicitation through the DIBBS portal using the provided UI link.

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

FILTER-DRIER, REFRIGERA

Solicitation # SPE8E8-26-T-4910

The contract specifies the procurement of a Filter-Drier for Refrigerant, identified by NSN 4130-01-367-5748 and part number BFK-083S from Emerson Electric Co ALCO Controls, with a quantity of four units to be delivered within 20 days of contract award. Delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any other standards. Packaging and palletization must adhere to DLA’s RP001 requirements, and parcel post is strictly prohibited—shipment must be via traceable means. The delivery address is NAVFACSYSCOM MID-ATLANTIC in Norfolk, VA, with specific building and contact details provided for freight shipments. The required delivery date is July 27, 2026, and the contract is governed under solicitation SPE8E8-26-T-4910, which incorporates mandatory technical and quality specifications referenced through R and I numbers from the DLA Master List. The contract is issued under the DoD unit of issue system and is subject to Covered Defense Information protocols. The point of contact is Alexis Selby of the Defense Logistics Agency, and the solicitation is classified under NAICS code 333415 for industrial machinery manufacturing.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

LADDER, SAFETY STEP

Solicitation # SPE8E5-26-T-3728

The contract pertains to the procurement of one unit of a Safety Step Ladder, identified by NSN 5440016969999 and part number 10403 from LITTLE GIANT LADDER SYSTEMS, LLC, under solicitation SPE8E5-26-T-3728. Delivery is required within 20 days of contract award, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in strict accordance with ASTM D3951, with all labeling and marking compliant with MIL-STD-129 and DLA’s packaging requirements RP001. Palletization must adhere to DLA’s specified standards, and government-issued identification must be removed from non-accepted supplies per RQ011. Technical and quality requirements referenced through R- and I-numbers from the DLA Master List override any conflicting standards. Shipping must be conducted via traceable freight, explicitly prohibiting parcel post, to the designated delivery point at Naval Air Station Whidbey Island in Oak Harbor, WA. The contract incorporates stringent controls for documentation, source approval, and handling of covered defense information under RD003. The unit of issue is each, with a total price of $1.00, and the item is classified under NAICS code 238110. The original required delivery date is July 23, 2026, with procurement managed by the Defense Logistics Agency. A designated point of contact, Brandon Wicker, can be reached for inquiries, and all submissions must align with the solicitation’s deadlines and formatting requirements. The contract also specifies internal government identifiers and distribution codes for tracking, and final delivery must be coordinated using the provided TCN and project details to ensure compliance with DLA’s logistics protocols.

Poured Concrete Foundation and Structure Contractors

POSTED

about 15 hours ago

DEADLINE

FLASHLIGHT, LAZERBRI

Solicitation # SPE8E7-26-Q-0274

The contract pertains to the procurement of one box containing twelve LazerBrite model LB2-105-12B flashlights, identified by NSN 6230-01-505-5272, under solicitation SPE8E7-26-Q-0274. The supplier, Tactical Lighting Solutions LLC, is required to deliver the items in strict compliance with DLA packaging standards outlined in RP001, including adherence to MIL-STD-129 for marking and labeling, and commercial packaging per ASTM D3951 unless federal hazardous material standards under FED-STD-313 apply, in which case TQ requirement IP025 governs. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting commercial standards. The contract enforces a firm fixed price with zero tolerance for quantity variance, and delivery must occur within 30 days after award, with both inspection and acceptance points at the destination. Shipment is to be routed to the USS RAFAEL PERALTA DDG 115 via FPO AP 96694-1500, and transportation procedures must follow DLAD PROC NOTES C19 and C20. The item is covered under DLA’s procurement framework, with controlled access to covered defense information, and pricing, delivery, and compliance terms are binding with no flexibility.

Broom, Brush, and Mop Manufacturing

POSTED

about 15 hours ago

DEADLINE