Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Media and Water Blasting for Corrosion Removal

Active

Federal

Response Deadline08/21/2026, 01:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires media and water blasting services to remove corrosion and prepare metal surfaces on Aerospace Ground Equipment and Munitions Trailers to meet SSPC-SP 10/NACE No. 2 surface preparation standards, ensuring a near-white metal finish suitable for protective coatings. This effort is critical to maintaining the integrity and operational readiness of defense-related equipment by preventing further degradation and extending service life through proper surface conditioning. The solicitation is a small business set-aside under the SBA’s Total Small Business Set-Aside program, restricting eligibility to verified small businesses as defined by FAR 19.5. The work is tied to NAICS code 562910 for remediation services and will be performed at a location in Yigo, Guam with the ZIP code 96929. The opportunity was posted on July 27, 2026, and responses must be submitted by August 21, 2026, with the contracting activity under the Department of Defense’s FA5240 36 Cons Lgc office.

General Info

Small business set-aside for media blasting to meet SSPC-SP 10 standards on defense equipment in Yigo, Guam.

Agency

Department Of Defense → FA5240 36 Cons LgcView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

Yigo, GU, 96929, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 01:00:00 AM UTCin 23 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA5240 36 Cons Lgc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA5240 36 Cons Lgc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform media and water blasting to remove corrosion and prepare metal surfaces on Aerospace Ground Equipment and Munitions Trailers to SSPC-SP 10/NACE No. 2 standards.

Similar Contracts

Same NAICS industry code

CATS Fuel Treating and Cleaning of Diesel Storage TanksThe City of Charlotte, through its Charlotte Area Transit System (CATS) Facilities department, is seeking a vendor to provide fuel treating and cleaning services for eight diesel underground storage tanks located across two sites in the Charlotte metro area. The scope includes biocide treatments to prevent microbial growth, thorough tank cleaning to remove contaminants and sediment, and regular fuel sample testing to ensure fuel quality and compliance with operational standards. Services must be performed with strict adherence to environmental and safety regulations to safeguard the integrity of the fuel supply and storage infrastructure. All work is to be completed at the designated CATS facilities within North Carolina, with no alternative locations permitted. The solicitation, identified by number 269-2026-1974, was posted on July 27, 2026, and responses are due by August 24, 2026, at 7:00 PM eastern time. The contract opportunity is open to qualified service providers with demonstrated experience in diesel UST maintenance, fuel conditioning, and laboratory-grade fuel analysis. Andre Branch of the CATS Facilities department is the primary point of contact for inquiries and must be reached via email at andra.branch@charlottenc.gov. Prospective bidders are directed to the Bonfire Hub platform for full solicitation details and submission requirements.

City Of Charlotte

POSTED

DEADLINE

Environmental Remediation (Asbestos-Related Work)The contract requires the performance of environmental remediation activities related to the removal of HVAC systems, with specific focus on asbestos handling in compliance with federal and state regulations. Work must include thorough asbestos testing, installation of proper containment measures, abatement procedures, and safe disposal of hazardous materials, all aligned with EPA, OSHA, and Florida Department of Environmental Protection standards. This subcontract is part of a larger initiative managed by the Florida Department of Transportation, with performance expected to occur within the state of Florida, though exact location details are not specified. The solicitation was posted on July 27, 2026, and responses are due by August 11, 2026, at 6:30 PM. The NAICS code 562910 classifies this work under Other Remediation Services, indicating specialized environmental cleanup expertise is necessary. Bidders must be prepared to demonstrate full regulatory compliance, qualified personnel, and appropriate equipment for asbestos abatement operations.

Florida Department of Transportation

POSTED

DEADLINE

Emergency On-Call Field CrewsThe City of Austin seeks subcontractors to provide 24/7 on-call field crew services for emergency water main breaks and urgent repairs across its service area. The contract requires immediate response capability at all times to ensure timely restoration of water service, minimize disruptions to public utilities, and maintain infrastructure integrity. Contractors must be prepared to mobilize crews, equipment, and materials around the clock to address urgent incidents regardless of time, day, or weather conditions. This subcontract, classified under NAICS code 562910, is open for response until September 3, 2026, with no set-aside provisions identified. Performance is expected within the jurisdiction of the City of Austin in Texas, and while specific geographic details are not defined, the work will focus on the city’s water distribution system. The solicitation was posted on July 27, 2026, and interested parties can access further information through the city’s official finance portal. Bidders must demonstrate proven capacity for emergency response, reliability, and compliance with all operational and safety standards expected by the city.

POSTED

DEADLINE

in about 1 month

Hazardous Materials Handling and ComplianceThe contract requires the management and proper labeling of hazardous materials utilized in maintenance operations, ensuring all substances are accurately identified and handled in accordance with established safety protocols. A critical component of the scope involves the timely submission of Safety Data Sheets for each hazardous material, providing essential information on handling, storage, emergency procedures, and disposal. Compliance with all applicable environmental regulations is mandatory, requiring ongoing adherence to federal, state, and local standards governing hazardous waste management and workplace safety. This subcontract, posted on July 27, 2026, with a response deadline of July 29, 2026, is classified under NAICS code 562910 for Other Remediation Services and is associated with the Department of Defense through the FA2860 316 Cons Pk office. The work is to be performed in St. James, and the contract does not specify a set-aside type or point of contact, indicating the opportunity is open to eligible subcontractors without reserved status. Proposals must be submitted before the deadline to be considered for award.

FA2860 316 Cons Pk

POSTED

DEADLINE

F--(RAF/ESO) Ambler Asbestos Piles – Operable Unit 1The contract pertains to the F--(RAF/ESO) Ambler Asbestos Piles – Operable Unit 1 with solicitation number 68HE0326R0019, issued by the Environmental Protection Agency’s Region 3 Contracting Office in Philadelphia, Pennsylvania. The solicitation, posted on July 27, 2026, is categorized as a special notice under NAICS code 562910, indicating it relates to remediation and waste management services. The primary point of contact is Gregory Dotson, reachable via email and phone provided, with the response deadline now set for August 4, 2026, at 7:00 PM Eastern Time, following an extension from the original schedule. The government’s deadline for responding to bidder questions has also been revised to July 29, 2026, to provide adequate time for clarification prior to proposal submission. The place of performance remains unspecified in the data provided, and no set-aside provisions are indicated for this procurement.

Region 3 Contracting Office

POSTED

DEADLINE

Mold MitigationA site visit for the mold abatement and remediation contract is scheduled for 29 July at 9:50 AM at the Patrick Space Force Base Visitors Center, with attendance requiring prior email coordination with the point of contact listed in the CSS. The contract, identified by solicitation number FA252126QB132 and titled “Mold Mitigation,” is a total small business set-aside under FAR 19.5, targeting services to remediate mold and repair ceilings across approximately 14,400 square feet in Building 559 at Patrick SFB, Florida. Performance must be completed within 60 calendar days following award, with all work conducted on-site under FOB Destination terms and payment processed through the Wide Area WorkFlow system. The scope includes full mold mitigation, HVAC decontamination using HEPA filtration, surface cleaning with EPA-approved antimicrobials, application of mold inhibitors, post-remediation air testing, debris removal with documentation, and submission of preconstruction and closeout deliverables. Compliance is mandatory with EPA regulations, DoDM 5200.08v3, AFI 31-218, DAFFARS 5352.242-9000, AFMAN 31-101v3, and 29 CFR 1910.29 for signage and containment. Personnel must be certified in mold remediation and OSHA training, with supervisory staff meeting specific competency standards. Base access requires formal requests on company letterhead, issuance of identification and vehicle passes, and adherence to strict security protocols under DAFMAN 16-1405 and DoDM 5200.02. Contractors must provide waste dumpsters, manage disposal with verified tickets, notify the contracting officer 24 hours in advance of work activities, and preserve fire, electrical, and communication systems without disruption. All proposals must be submitted electronically to both the primary and secondary points of contact by 14:30 EST on 31 July 2026, and must include UEI, size status certification, compliance with FAR 52.203-18 and 52.209-11, and responses to all required representations. Evaluation will be based on price, technical performance, delivery timeline, and past performance as a combined trade-off, with no formal weighting or LPTA designation. The government

FA2521 45 Cons Pk

POSTED

DEADLINE

Munitions Response Actions at Vieques, Puerto Rico and Other SitesThis is a sources sought notice issued by NAVFAC Atlantic for market research purposes, not a solicitation for proposals, and no contract will be awarded based on responses. The Government is seeking qualified small businesses—including Service-Disabled Veteran-Owned, Veteran-Owned, Economically Disadvantaged Women-Owned, Women-Owned, Small Disadvantaged, and HUBZone businesses certified by the Small Business Administration—to assess market availability and capability for a potential cost-plus-award-fee, indefinite-delivery/indefinite-quantity (CPAF ID/IQ) contract for munitions response actions. The primary work location is Vieques, Puerto Rico, with potential global execution across NAVFAC’s area of responsibility, including the continental U.S., Caribbean, Europe, Africa, Southwest Asia, Hawaii, Far East, and Pacific regions. The North American Industry Classification System (NAICS) code is 562910, Environmental Remediation Services, with a small business size standard of 1,000 employees. The estimated total contract value over the five-year period—comprising a base period and four one-year options—is $95 million, with individual task orders typically valued at $10 million or more. The scope of work requires the contractor to provide all labor, equipment, materials, and supervision to conduct investigations, removal, and remedial actions for unexploded ordnance, discarded military munitions, and munitions constituents in both terrestrial and aquatic environments, in strict compliance with federal regulations including CERCLA, the National Contingency Plan, DERP, and Department of Defense Explosives Safety Board standards. Offerors must possess a Defense Contract Audit Agency-approved accounting system capable of supporting cost-reimbursable contracts and must demonstrate relevant experience in UXO/DMM response, hazardous materials handling, and operations in remote or challenging terrains. Only responses submitted via the official Sources Sought Capabilities Questionnaire in Times New Roman, 12-point font, in PDF or Word format, will be considered; no supplemental materials will be reviewed. Responses must be received by 14 August 2026 via email to the Contract Specialist, Elizabeth Eliason-Carey. Large businesses are ineligible, and no payment will be provided for responses. All submissions are confidential and used solely for acquisition planning; the Government retains the right to cancel the effort at any time without obligation or debrief.

Navfacsyscom Atlantic

POSTED

DEADLINE

Z--ASBESTOS AND LEAD PAINT ABATEMENT The National Park Service seeks a small business contractor to perform asbestos-containing material and lead-based paint abatement at four unoccupied residential structures and one accessory outbuilding within Cedar Creek and Belle Grove National Historical Park in Middletown, Virginia, with all structures scheduled for demolition following abatement. This is a competitive total small business set-aside acquisition under NAICS code 562910, with an estimated value between $100,000 and $250,000, to be awarded as a firm-fixed-price contract to the lowest-priced qualified offeror. The performance period is 60 calendar days from award, with work expected to commence on August 14, 2026, and conclude by October 26, 2026. All bidders must be registered in SAM.gov with a valid UEI and CAGE code, and must complete all required representations and certifications online. A mandatory site visit is scheduled for July 23, 2026, and all questions must be submitted by 2:00 PM ET on July 27, 2026. Proposals must be submitted electronically via email by 5:00 PM ET on July 31, 2026, and must include Attachment 3 containing the quote, bio-based certification, experience questionnaire, resumes, and certification copies for all proposed workers. The contractor must hold valid state certifications for both asbestos and lead abatement, and all hands-on personnel must possess current 32-hour asbestos and 16-hour lead abatement worker certifications. Technical evaluation emphasizes proven experience, including a minimum of seven years of abatement experience by the project manager, and past performance, with a trade-off process favoring the most advantageous offer considering both non-price factors and price. The contractor is required to comply with all federal, state, and EPA regulations, including OSHA’s Hazard Communication Standard and NESHAP requirements, and must submit a site-specific safety plan and Safety Data Sheets. Invoicing must be done electronically through the Department of the Treasury’s Invoice Processing Platform. The contractor must indemnify the government against all liabilities arising from performance, except where caused solely by government negligence, and must maintain strict confidentiality of all government-furnished information. Work will be inspected and accepted on-site by the Contracting Officer’s Representative, with final acceptance contingent upon compliance with all regulatory standards, including Virginia state thresholds for lead-based paint classification and the proper disposal of hazardous materials

Northeast Regional Contracting

POSTED

DEADLINE

F--Kitchen Cleaning & Remediation for Northern CheyenThis contract is a Firm-Fixed-Price Purchase Order issued by the Bureau of Indian Affairs, Northwest Region, under solicitation number 140A0426Q0011, for cleaning and remediation services at the Northern Cheyenne Youth Detention Center located at 304 Mennonite Church Road, Busby, Montana. The work scope includes a comprehensive site assessment of interior areas and crawlspaces to identify mold and biohazardous waste, primarily rodent feces and urine, followed by containment, remediation, and restoration of affected spaces including demolition and reinstallation of damaged materials such as carpet, drywall, and ceiling tiles. All activities must adhere to specified standards including the EPA’s Mold Remediation in Schools and Commercial Buildings guidance, the ANSI/IICRC S520 Standard for Professional Mold Remediation, OSHA regulations, and use of EPA Safer Choice products. The project requires oversight by a Certified Industrial Hygienist, clearance sampling, and submission of detailed electronic deliverables in PDF format, including plan view drawings, photographic documentation, laboratory results, and a final report with an Operations and Maintenance plan. A Certified Industrial Hygienist must provide a written determination that the facility meets acceptable indoor environmental quality standards for safe human occupancy. The procurement is entirely set aside for Indian Small Business Economic Enterprise (ISBEE) under the Buy Indian Act, requiring offerors to self-certify as an Indian Economic Enterprise by submitting the IEE Representation Form and DIAR 1452.280-4. Offerors must also hold a Unique Entity ID and provide a complete business mailing address. Proposals are due electronically by June 23, 2026, and are subject to evaluation under a Lowest Priced - Technically Acceptable methodology, where technical acceptability is a mandatory pass/fail gate based on full compliance with the Statement of Work and applicable standards. Contract performance must occur within 15 days after award, strictly during standard weekday hours, and all work must be coordinated with the designated Point of Contact. Contractors must comply with Tribal Employment Rights Office regulations, environmental disposal laws, and safety practices including use of engineering controls and personal protective equipment. Payment is exclusively through the U.S. Department of the Treasury’s Invoice Processing Platform, with waivers requiring prior written approval. Final payment requires submission of a final invoice labeled as such, a certificate of completion, and a release of claims, all submitted no later than sixty calendar days after service completion, with no

Northwest Region

POSTED

DEADLINE

Oil and Gas Well Plugging and Remediation Services Qualified Vendors List (QVL)The State of Missouri through the Division of Purchasing Procurements is soliciting qualified vendors to join the Oil and Gas Well Plugging and Remediation Services Qualified Vendors List, targeting contractors capable of safely plugging and remediating orphaned or abandoned oil and gas wells across the state. Interested parties must submit responses by July 27, 2026, to be considered for inclusion on the list, which will serve as a pre-qualified pool of service providers for future state-funded remediation projects. The solicitation does not specify a set-aside type or NAICS code, and performance will occur throughout Missouri, with no geographic restrictions within the state. All vendors must demonstrate technical capability, regulatory compliance, and proven experience in well plugging and environmental remediation to qualify. Submissions will be evaluated to ensure adherence to state safety and environmental standards, and successful applicants will be added to a centralized vendor list that state agencies can reference when awarding future contracts. Any questions or communications regarding the solicitation must be directed to Ryan Bulinski, the designated buyer, at ryan.bulinski@oa.mo.gov. The solicitation is accessible via the provided online portal, and no bid bond or formal proposal is required at this stage—only qualification information necessary for list inclusion.

PROC OA DIVISION OF PURCHASING PROCUREMENTS

POSTED

DEADLINE

Hazardous Materials Handling and LabelingThe contract requires the identification, labeling, and documentation of hazardous materials in strict adherence to OSHA’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring all federal mandates for chemical safety and transparency are met. The work must account for applicable exemptions under the Federal Insecticide, Fungicide, and Rodenticide Act and the Federal Food, Drug, and Cosmetic Act, among other relevant statutes, to accurately classify materials that fall outside standard hazardous regulation. All activities must be performed at Robins Air Force Base, Georgia, with full compliance to federal guidelines for handling, storage, and recordkeeping of regulated substances. This is a subcontract under the NAICS code 562910, indicating waste management and remediation services, and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 26, 2026, with a deadline for responses on August 3, 2026. The place of performance is specifically designated as Robins AFB, zip code 31098-1887, and any proposer must demonstrate capability to comply with defense-specific hazardous materials protocols. While no set-aside designation is specified, the scope demands specialized technical expertise in regulatory compliance, documentation, and on-site hazardous material management within a military installation.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous and Radioactive Materials Handling & PackagingThis contract pertains to the safe handling, labeling, packaging, and documentation of components that may include hazardous or radioactive materials, ensuring full adherence to federal regulations and MIL-STD-129 for marking and transportation standards. The work is scoped to support defense-related operations and must be performed with strict compliance to safety, environmental, and logistical protocols to mitigate risks associated with dangerous substances. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. The North American Industry Classification System code 562910 indicates the nature of the work falls under other waste management services, emphasizing the specialized handling and disposal functions involved. Performance of this contract is expected to take place at Tinker Air Force Base, Oklahoma, with a response deadline set for August 3, 2026. The solicitation is managed by the Department of Defense’s ASC Supplier Operations AE and AF Division, indicating this effort supports critical defense logistics infrastructure. All activities must align with precise documentation and traceability requirements to ensure regulatory compliance and secure transport of sensitive materials. The nature of the work demands specialized expertise, validated processes, and proven experience in managing regulated substances within military supply chains.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → FA5240 36 Cons Lgc

Same awarding agency

Paint and Coating Materials SupplyThe contract is for the supply of military-specification paints, primers, and surface treatment chemicals exclusively for corrosion control and painting operations on military trailers. It is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid, and is classified under NAICS code 424690 for other miscellaneous chemical and allied products merchant wholesalers. The opportunity is managed by the Department of Defense through the FA5240 36 Cons Lgc office, with performance required at Yigo, Guam, 96929. Bids must be submitted by August 21, 2026, at 1:00 AM, following the posting date of July 27, 2026. All materials must meet rigorous military standards to ensure durability and compliance in demanding operational environments.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

Fiberglass and Composite ReworkThis contract calls for the repair or replacement of damaged fiberglass and composite panels on AGE equipment using military-approved lay-up and resin techniques, ensuring adherence to federal defense standards for durability and performance. The work must be performed by a qualified small business under a Total Small Business Set-Aside, as defined by the SBA and FAR 19.5, with the North American Industry Classification System code 326199 applying to other plastic product manufacturing. Performance is required at Yigo, Guam, with a zip code of 96929, and the contract is structured as a subcontract under the Department of Defense, specifically the FA5240 36 Cons Lgc office. All work must meet military specifications for composite restoration, and contractors are expected to possess expertise in advanced materials and aerospace-grade repair protocols. The solicitation was posted on July 27, 2026, with a strict response deadline of August 21, 2026, at 1:00 AM local time. The opportunity is accessible via the SAM.gov platform, and while no point of contact is listed, interested parties must submit proposals in compliance with federal subcontracting regulations and technical requirements tied to defense equipment maintenance. The location in Yigo indicates this work supports operations in the Indo-Pacific region, and only small businesses certified under the SBA's set-aside program are eligible to compete. Contractors must be prepared to demonstrate past performance in military-grade composite repairs and adherence to approved resin curing and lay-up methodologies.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Precision Painting and Coating ApplicationThe contract requires the application of military-specification primers and topcoats to AGE and MUNS trailers using climate-controlled booths, ensuring strict adherence to MIL-PRF-32550 and technical order standards. All work must be performed with precision to meet federal defense quality requirements, with attention to surface preparation, coating consistency, and environmental controls during the painting process. The performance location is designated as Yigo, 96929, and the contract is structured as a small business set-aside under the SBA program, specifically reserved for total small business participation in accordance with FAR 19.5. The North American Industry Classification System code 332813 identifies the scope as metal coating, engraving, and related services. Proposals must be submitted by the deadline of August 21, 2026, and the contracting activity is under the Department of Defense through the FA5240 36 Cons Lgc office.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Welding and Metal Fabrication RepairThe contract calls for structural welding and metal fabrication services to repair damaged frames and components on AGE and MUNS trailers, ensuring compliance with AWS D1.1 welding standards and applicable military technical orders. All work must meet rigorous quality and safety requirements typical of defense sector maintenance, with a focus on restoring structural integrity and operational readiness of military equipment. The scope is limited to repair tasks only, excluding new construction or modification beyond the original design specifications. This is a total small business set-aside subcontract under NAICS code 332322, reserved exclusively for small businesses as defined by the SBA. The opportunity is managed by the Department of Defense through the FA5240 36 Cons Lgc organization, with performance required at Yigo, 96929. Interested parties must submit responses by August 21, 2026, at 1:00 AM, following the solicitation posted on July 27, 2026. The work demands certified welders, appropriate equipment, and a proven ability to adhere to military specification standards in a remote operational environment.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

36 MXG Corrosion Control Repair and Paint ServicesThis contract is a combined synopsis and solicitation for a small business set-aside under FAR 19.5, issued as an indefinite-delivery/indefinite-quantity (IDIQ) firm-fixed-price (FFP) contract for corrosion control repair and paint services on Guam, primarily for Aerospace Ground Equipment (AGE) and Munitions (MUNS) Trailers. The solicitation number is FA524026Q0017, with a five-year ordering period from September 7, 2026, to September 6, 2031, and a maximum contract lifecycle of five years and six months to accommodate orders issued near the end of the ordering period. The total ceiling value is $7,100,000, with individual task orders subject to a minimum order value of $2,500. Work must be performed at the contractor’s facility on Guam, though exceptions may apply as specified in task orders, and all deliveries are FOB destination, with final inspection and acceptance occurring at locations designated in each order, such as Andersen Air Force Base. Contractors are required to remove corrosion, perform surface preparation, apply protective coatings per Technical Orders like TO 1-1-691 and TO 1-1-8, and replace hardware under the micro-purchase threshold, using approved methods such as MIL-DTL-5541 and MIL-PRF-32550 for chemical conversion and zinc-rich priming. Personnel must hold current certifications, use appropriate personal protective equipment, and comply with OSHA standards, while also applying all required markings and stencils in accordance with TO 35-1-3 and TO 35-1-18. The contract includes stringent cybersecurity requirements under 252.204-7012 and 252.204-7008, prohibits hexavalent chromium, mandates adherence to the safeguarding of covered defense information, and bans procurement from the Xinjiang region and business with the Maduro regime. Offerors must submit proposals in three volumes via email to three designated points of contact no later than 11:00 a.m. Chamorro Standard Time on August 21, 2026, with pricing required exclusively in a specified .xlsx format and past performance information limited to a fact sheet and questionnaire. The evaluation is strictly lowest-priced, technically acceptable, requiring full conformance to all mandatory requirements without trade-offs

All Other Automotive Repair and Maintenance

POSTED

DEADLINE

Kitchen Equipment (Blast Chiller, Tilt Skillet and Conveyor Dishwasher)

Food Product Machinery Manufacturing

POSTED

DEADLINE

Unable to decompose sub-opportunities due to lack of access to prime contract dataNo subcontract opportunities can be identified or structured due to the absence of access to the prime contract’s scope, CLINs, or statement of work, preventing any meaningful breakdown or targeting of subcontracting roles. The opportunity is posted as a Total Small Business Set-Aside under SBA guidelines, limiting eligibility exclusively to small businesses, though the NAICS code, organization type, and point of contact remain unspecified. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and the place of performance is located in Yigo, 96929, under the Department of Defense’s FA5240 36 Cons Lgc office. Despite the open solicitation, the lack of core contract details renders it unactionable for potential subcontractors seeking to participate.

POSTED

DEADLINE

Sources Sought 36 CES/CEF Radios for Engine 16 and 20The U.S. Department of Defense through the 36th Contracting Squadron is seeking information from small businesses to support a potential acquisition for 36 CES/CEF Radios destined for Engine 16 and Engine 20, under solicitation number FA524026S3002. This sources sought notice is issued as a total small business set-aside in accordance with FAR 19.5, meaning only small businesses are eligible to respond, and the NAICS code 334220 applies to the manufacturing of communications equipment. Responses are due by July 31, 2026, at 2:00 AM Eastern Time, with the solicitation posted on July 24, 2026. The anticipated performance location is in Yigo, Guam, 96929, while the contracting office is situated at APO AP 96543-4040. Primary point of contact for inquiries is Andre Conley, reachable at 671-366-7551 and andre.conley@us.af.mil, with Coree Asprer listed as the secondary contact at 671-366-6628 and coree.asprer.1@us.af.mil. Further details on requirements are to be found in the attached Sources Sought Notice and Performance Work Statement.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Towable Passenger Stairs Supply and DeliveryA single 506 EARS Towable Passenger Stairs unit is to be supplied, shipped, and delivered to Andersen Air Force Base in Yigo, Guam, with all components meeting detailed technical specifications and Department of Defense procurement standards. The contract is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 336413 for aircraft equipment manufacturing. The solicitation was posted on July 23, 2026, with proposals due by 3:00 AM Eastern Time on July 30, 2026, and the delivery location is fixed at the Yigo, Guam, zip code 96929. All work must comply with federal contracting regulations and ensure full operational readiness for military aircraft passenger handling at the designated installation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

506 EARS TOWABLE PASSENGER STAIRSThe contract solicitation for 506 EARS TOWABLE PASSENGER STAIRS, identified by solicitation number FA524026Q0024, is a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses as defined by the SBA. The NAICS code 336413 applies to this procurement, which is managed by the Department of Defense through the agency office FA5240 36 Cons Lgc located in APO, AP 96543-4040. All inquiries must be directed via email only to June G. Borja and Lauren Reyes no later than July 28, 2026, at 1:00 PM, and no responses will be provided for questions submitted after this deadline. The final quote package is due by 30 July 2026 at 1:00 PM Chamorro Standard Time, with the contract performance to occur in Yigo, Guam, 96929. Both points of contact, June Borja and Lauren Reyes, are listed with their respective phone numbers for coordination, and additional information can be accessed through the provided SAM.gov link.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Asbestos Abatement and HAZMAT Compliance Support

Remediation Services

POSTED

DEADLINE

Initial Site Assessment and Baseline Survey

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE