Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Medical Device Manufacturing & Assembly

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the manufacturing and assembly of sterile, disposable three-way Foley catheters, encompassing all stages from molding and component assembly to rigorous quality control and final packaging. Production must adhere strictly to military and medical regulatory standards to ensure safety, reliability, and performance in clinical and field settings. The work requires full compliance with industry-specific sterilization protocols and quality assurance systems tailored for implantable medical devices, with an emphasis on consistency, traceability, and contamination control throughout the production lifecycle. This subcontract is issued under NAICS code 325620 for medical device manufacturing and is managed by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF. The place of performance is designated as Scott Air Force Base with ZIP code 62225-5252, indicating the primary logistics and delivery hub. Bids must be submitted by August 3, 2026, following a solicitation posted on July 26, 2026. Participation is open to qualified subcontractors capable of meeting the stringent technical, regulatory, and delivery requirements for defense-grade medical supply chains.

General Info

Manufacture sterile Foley catheters to military medical standards for Scott Air Force Base by August 3, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325620 - Toilet Preparation ManufacturingView NAICS

Place of Performance

SCOTT AFB, IL, 62225-5252, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacturing of sterile, disposable 3-way Foley catheters including molding, assembly, quality control, and final packaging in compliance with military and medical standards.

Similar Contracts

Same NAICS industry code

Medical Supply Manufacturing and PackagingThe contract pertains to the manufacture and sterile packaging of culture swabs in strict compliance with medical standards, encompassing all aspects of labeling and preparation for government shipment. The work is to be performed at Fort Bliss, Texas, with the facility required to adhere to rigorous production and packaging protocols to ensure product safety and regulatory conformity. The NAICS code 325620 indicates the scope involves medical and surgical instrument manufacturing, and the contract is structured as a subcontract under the Department of Defense’s Medical Supply Chain initiative. All bids must be submitted by August 3, 2026, and the solicitation is open to qualified subcontractors capable of delivering sterile, compliant culture swabs on schedule. The government expects full traceability, quality control, and readiness for direct deployment to military or federal medical facilities. The place of performance is fixed, and contractors must ensure all packaging and labeling meet federal specifications for distribution through military supply channels. The absence of set-aside information suggests competition is open to all eligible entities, provided they meet the technical and regulatory requirements for medical device production.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Safety Syringe and Needle SupplyThe contract entails the supply of 1,000 units of NSN 6515-014520465, a safety hypodermic syringe and needle, to be delivered to Luke Air Force Base in Arizona with a zip code of 85309-5300. The procurement is classified as a subcontract under the NAICS code 325620, which corresponds to the manufacturing of medical and dental instruments and supplies. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, indicating a brief window for potential suppliers to submit proposals. The contracting activity is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense, ensuring compliance with federal medical equipment standards. The delivery location is specific to Luke Air Force Base, emphasizing the military nature of the requirement and the need for timely, secure, and regulated supply chain execution.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Thoracic Surgical Drainage TubesThe contract seeks the procurement and delivery of sterile, disposable thoracic surgical drainage tubes meeting stringent regulatory and packaging standards, including compliance with FDA guidelines, U.S. Department of Defense Defense Logistics Agency packaging specifications, and defined shelf-life requirements. These medical devices are intended for use in thoracic surgical procedures and must be manufactured and packaged under conditions that ensure sterility and long-term viability in field and clinical environments. The solicitation is issued as a subcontract under NAICS code 325620, designated for Medical Equipment and Supplies Manufacturing, and places performance at Fort Bragg, North Carolina, with a response deadline of August 3, 2026. The contracting activity is the Medical Supply Chain MD Surg FSF under the Department of Defense, indicating the end-user is military medical services requiring reliable, traceable, and compliant supply chain solutions for battlefield and hospital-based surgical care.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Sterile Hypodermic Needle SupplyThe contract requires the supply of sterile, Luer-lock hypodermic needles in 18 gauge and 1.5-inch size, packaged in lots of 100 units, adhering strictly to federal medical labeling, packaging, and hazardous materials regulations. These needles are intended for use in medical settings under the purview of the Department of Defense and must meet all applicable quality and safety standards for clinical deployment. The procurement is structured as a subcontract under NAICS code 325620, indicating classification within the medical device manufacturing sector, and places of performance are designated for Groton, Connecticut with zip code 06340-4905. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, providing potential vendors a seven-day window to submit proposals. The contracting entity is listed as MEDICAL SUPPLY CHAIN MD SURG FSF, operating under the Department of Defense, requiring compliance with military supply chain protocols. All submissions must be made through the official DIBBS portal linked in the contract data. While no setaside provisions or point of contact details are specified, full compliance with federal medical and transportation regulations is mandatory for eligibility and contract award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Device Manufacturing – Hypodermic Needles (Gauge 21)The contract requires the manufacture, packaging, labeling, and delivery of medical-grade hypodermic needles in gauge 21, adhering strictly to FDA regulations, ISO 13485 quality management standards, and applicable military specifications. All products must meet rigorous performance and safety criteria to ensure reliability in clinical and defense medical environments. The work is to be performed at the designated place of performance in Groton, Connecticut, with exact delivery timelines and quantities to be defined by the awardee’s compliance with the technical and logistical requirements outlined by the Department of Defense’s Medical Supply Chain. The solicitation, posted on July 26, 2026, with a response deadline of August 3, 2026, is classified as a subcontract under NAICS code 325620 for medical device manufacturing. It is managed by the Department of Defense through its Medical Supply Chain division, and all bidders must demonstrate capacity for high-volume production, full traceability, sterile packaging, and compliance with military-grade documentation and quality assurance protocols. The procurement is intended to support critical medical readiness and operational requirements within U.S. military healthcare systems, necessitating consistent supply chain integrity and adherence to all regulatory frameworks governing medical devices.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Sterile Packaging and Labeling ServicesThe contract requires the final packaging, labeling, and sterilization of spinal needles in strict adherence to DLA RP001 and Medical Marking Standard No. 1, ensuring all products meet federal regulatory requirements for medical devices. Each unit must be accurately labeled with lot numbers, expiration dates, and FDA-compliant information to guarantee traceability, safety, and compliance throughout the supply chain. The work must be performed with precision to maintain the sterility and integrity of the spinal needles from packaging through final distribution. This is a subcontract under the Department of Defense’s Medical Supply Chain MD SURG FSF, with performance location specified as Fort Bragg, North Carolina, zip code 28310. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026. The North American Industry Classification System code 325620 categorizes the work under Pharmaceutical and Medicine Manufacturing, indicating the technical and regulated nature of the services. Interested parties must submit proposals through the DIBBS portal prior to the deadline to be considered for award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Sterile Medical Device Manufacturing and PackagingThe contract requires the manufacture and packaging of sterile, disposable Whitacre-style spinal anesthesia needles in 25 gauge and 3.5 inch length, fully compliant with Department of Defense technical, packaging, and shelf-life specifications. Production must include rigorous sterilization processes, quality control verifications, and packaging of exactly 10 units per package, ensuring every unit meets stringent medical device standards for safety and functionality. All work must be performed in accordance with industry best practices and DLA requirements to guarantee consistent performance and reliability in clinical use. The contract falls under NAICS code 325620 for medical equipment and supply manufacturing and is classified as a subcontract under the Department of Defense’s Medical Supply Chain MD Surg FSF. Performance is designated for Fort Bragg, North Carolina, with a response deadline of August 3, 2026, and the solicitation was posted on July 26, 2026. All suppliers must be prepared to meet exacting standards for sterility, packaging, and shelf-life integrity, with no deviations permitted. The procurement is part of a broader military medical supply effort, emphasizing readiness and traceability of critical surgical devices.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Manufacture of Urine Collection Bags (Medical Device Production)The contract requires the manufacture of disposable 2000 CC urine collection bags featuring 96-inch tubing, graduated markings for volume measurement, and a latex catheter adapter, all produced to meet specified medical device standards mandated by the Defense Logistics Agency and the Food and Drug Administration. The product must comply fully with DLA medical specifications and FDA regulatory requirements to ensure safety, functionality, and suitability for military medical use. The manufacturing process must maintain consistent quality control to support reliable performance in field and clinical environments. The contract is classified as a subcontract under NAICS code 325620, pertaining to medical device manufacturing, and is issued by the Department of Defense’s Medical Supply Chain MD Surg FSF office. Performance is designated for Scott AFB with a zip code of 62225-5252, indicating the intended delivery and logistics hub. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, allowing potential suppliers a limited window to submit proposals. All parties must adhere to strict regulatory and procedural guidelines outlined in the DLA directives to qualify for award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Disposable Medical Airway Device SupplyThe contract seeks the supply of disposable, sterile, latex-free nasopharyngeal airways sized at 28 French and 125 millimeters in length, to be delivered in individually sealed packages containing ten units each, with a total requirement of forty-eight such packages. These airways are classified under NAICS code 325620 and are intended for use within the Department of Defense’s Medical Supply Chain, specifically for performance at Fort Campbell with a ZIP code of 42223-5000. The solicitation is issued as a subcontract and is open for responses until August 3, 2026, with the posting date listed as July 26, 2026. All units must comply with sterile and latex-free standards to meet clinical safety and regulatory requirements for deployment in medical environments.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Latex-Free IV Extension Set Supply and PackagingThe contract requires the manufacture, packaging, and delivery of latex-free IV extension sets measuring 18 inches, each equipped with a dial-a-flow controller, a Clave Y site, and a male adapter. All products must fully comply with the Department of Defense’s Medical Supply Chain MD Surg FSF technical specifications, labeling requirements, and packaging standards to ensure seamless integration into military medical supply systems. The items are to be delivered to the designated place of performance in Groton, Connecticut, with specific attention to adherence to federal and defense logistics protocols. This is a subcontract opportunity under NAICS code 325620, with a response deadline of August 3, 2026, and a posting date of July 26, 2026. There is no set-aside designation, and the offering is open to qualified subcontractors capable of meeting the stringent medical device specifications. The contract emphasizes precision in design, material safety (latex-free), and regulatory compliance to support frontline medical operations. All submissions must align with the technical and administrative criteria outlined by the Defense Logistics Agency, and failure to meet these requirements will result in rejection.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Cooling Blanket Manufacturing & AssemblyThe contract involves the manufacturing and assembly of single-patient-use cooling blankets utilizing Polar Skin Mini-Mesh material saturated with ArctiQua, a specialized cooling agent, with final packaging in sealed foil pouches to ensure sterility and integrity. The work includes all steps from material integration and saturation to assembly and packaging, adhering to strict medical device production standards. Production is required to meet specifications for consistent thermal performance, safety, and patient compatibility, with the end product destined for use in clinical environments requiring controlled temperature management. The contract is classified as a subcontract under NAICS code 325620, indicating pharmaceutical and medicinal product manufacturing, and is sponsored by the Department of Defense through the Medical Supply Chain FSH office. The place of performance is specified as Morgantown, West Virginia, with a zip code of 26505-0000. The solicitation was posted on July 23, 2026, and responses are due by July 30, 2026, leaving a narrow seven-day window for submissions. All participants must ensure compliance with federal procurement protocols and quality control protocols appropriate for medical devices intended for DoD use.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Medical Device Supply – Intraosseous Infusion System (T.A.L.O.N.)The contract requires the supply of FDA-cleared manual intraosseous infusion devices known as T.A.L.O.N., specifically configured with 7 STE access points, to meet military-grade packaging and delivery standards. All units must be properly packaged and prepared for shipment in compliance with defense logistics protocols, with final inspection to occur upon arrival at the designated location in Boise, Idaho, 83705-6521. The devices are classified under NAICS code 325620, indicating manufacturing of medical and surgical instruments and supplies, and the contract is issued as a subcontract under the Department of Defense through the Medical Supply Chain MD Surg FSF. The solicitation was posted on July 23, 2026, with responses due by July 29, 2026, and all deliverables must adhere strictly to regulatory and operational requirements for military medical use.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Medical Device Adapter Supply – Electrosurgical Electrode AdapterThe contract involves the supply of 12 units of an electrosurgical electrode adapter identified by NSN 6515-01-628-6601, specifically designed to be compatible with ZOLL MD defibrillators. All units must comply with the technical, quality, and packaging standards established by the Defense Logistics Agency to ensure interoperability, reliability, and readiness in medical operations. The item is essential for supporting electrosurgical procedures within military medical settings where seamless integration with existing defibrillation equipment is critical. This subcontract was posted on July 26, 2026, with a response deadline of August 3, 2026, and falls under the NAICS code 339112 for surgical and medical instrument manufacturing. The contracting entity is the Medical Supply Chain MD Surg FSF under the Department of Defense, with no specific place of performance or point of contact listed. Bidders must adhere to all DLA requirements and submit proposals through the designated DIBBS platform prior to the deadline to be considered for award.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Small Business Subcontracting & Accelerated Payment AdministrationThe contract seeks administrative support to ensure compliance with small business subcontracting reporting obligations and accelerated payment requirements as mandated by Federal Acquisition Regulation clauses. This support will involve managing documentation, tracking subcontractor performance, and verifying adherence to reporting timelines and payment conditions to maintain regulatory alignment and facilitate timely financial processing. The work is tied to specific FAR provisions governing small business utilization and payment acceleration, requiring detailed recordkeeping and coordination with subcontractors to meet federal standards. The requirement is issued under NAICS code 541214, relating to accounting services, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. Performance is centered at APO, with a zip code of 09227-0000, indicating operations may involve overseas or military logistics environments. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026. Although no set-aside classification is specified, the nature of the work implies a focus on supporting small business participation within defense contracting frameworks, requiring precise administrative oversight to uphold federal compliance standards.

Payroll Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract under the title Hazardous Materials Compliance & Labeling Services seeks a subcontractor to provide regulatory compliance services focused on the development and government submission of hazard warning labels and Material Safety Data Sheets for chemical shipments. The work is tied to the Department of Defense’s Medical Supply Chain MD Surg FSF and requires adherence to federal and international standards governing the safe transport and handling of hazardous materials. The deliverables must ensure accurate, compliant documentation that meets mandated regulatory frameworks, supporting the secure logistics of chemical products within military medical supply channels. Performance of this contract is designated for APO, 09227-0000, indicating operations linked to overseas or military post locations with specific logistical and regulatory demands. The solicitation was posted on July 26, 2026, with proposals due by August 3, 2026, under a subcontract structure classified under NAICS code 541690, which covers other scientific and technical consulting services. The contracting entity is part of a broader defense supply infrastructure, requiring the successful bidder to demonstrate expertise in hazardous materials compliance, regulatory submission processes, and the ability to support mission-critical medical supply operations with precision and timeliness.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Phenol Red pH Test TabletsThe contract calls for the supply of diagnostic phenol red pH test tablets intended for medical or laboratory use, with strict adherence to federal hazard communication standards and military labeling requirements to ensure safety and regulatory compliance throughout handling and deployment. The items must meet precise specifications for accuracy, stability, and performance in clinical or field settings, and all packaging and documentation must align with Department of Defense mandates for hazardous material identification and safety protocols. This is a subcontract awarded under the NAICS code 325998 for other miscellaneous chemical product and preparation manufacturing, with the place of performance designated as APO 09227-0000, indicating delivery to military or federal medical facilities abroad. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and the contracting entity is the Medical Supply Chain MD Surg FSF under the Department of Defense. Bidders must ensure full compliance with all federal and military standards, including labeling, packaging, and safety data sheet requirements, to qualify for award.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Medical Product Labeling and Marking ServicesThe contract involves providing compliant labeling and marking services for medical products, ensuring adherence to military standards such as MIL-STD-129 and MMS No. 1. All labels must include essential information like NSN, CLIN, and delivery details, alongside properly formatted barcoding to support logistics and inventory tracking within the Department of Defense supply chain. The work is required at Fort Bliss, Texas, with precise technical specifications governing the application and readability of markings to meet operational readiness requirements. This subcontract is open for responses through August 3, 2026, and falls under NAICS code 323111, which pertains to printing and related support activities. The contracting entity is the Medical Supply Chain MD Surg FSF under the Department of Defense, indicating the scope is focused on supporting medical equipment and supplies critical to military health operations. Full compliance with labeling protocols is mandatory, and failure to meet these standards could result in rejection of delivered items, impacting mission-critical supply timelines.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Hazardous Materials Compliance and Safety DocumentationThe contract requires the identification of hazardous materials within medical products and the precise preparation of Safety Data Sheets (SDS) that meet both OSHA regulations and DFARS compliance standards. The work is specifically tied to medical supplies used within the Department of Defense supply chain and must ensure all chemical and material hazards are accurately documented for safe handling, storage, and use in military medical environments. Failure to adhere to these standards could compromise operational safety and regulatory compliance across DoD facilities. Performance of this subcontract is designated for Fort Bliss, Texas, with a response deadline of August 3, 2026, and a solicitation posted on July 26, 2026. The North American Industry Classification System code 541620 indicates the work falls under scientific and technical consulting services, emphasizing the need for expert knowledge in hazardous substance identification and regulatory documentation. The agreement is part of a broader effort by the Medical Supply Chain MD Surg FSF to enforce consistent, legally compliant safety protocols for all medical products entering the defense logistics network.

Environmental Consulting Services

POSTED

DEADLINE

Medical Product Distribution and Government LogisticsThe contract involves the transportation and delivery of medical supplies to Fort Bliss, Texas, with strict adherence to government logistics protocols, including mandatory destination inspections to ensure compliance with military standards. The scope includes handling and transporting critical medical products through potential ocean freight routes, requiring the use of U.S.-flag vessels as mandated by federal regulations. This subcontract is part of the Department of Defense’s Medical Supply Chain initiative, specifically under the MEDICAL SUPPLY CHAIN MD SURG FSF, and is classified under NAICS code 424210 for medical and dental equipment and supplies merchant wholesalers. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and the place of performance is clearly designated as Fort Bliss with zip code 79916-2527. All contractors must meet stringent compliance requirements related to transportation security, delivery timelines, and documentation to fulfill government logistical obligations effectively.

Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

DEADLINE

Supply of N95 Healthcare Particulate Respirators (Fluid-Resistant, Small Size)The contract solicits the procurement and delivery of fluid-resistant N95 respirators in small size, packaged in units of 20, adhering strictly to Department of Defense Logistics Agency packaging and labeling standards with a required 60-month shelf life. These respirators are intended for healthcare use and must meet all applicable federal specifications for particulate filtration and fluid resistance to ensure safety and compliance in clinical environments. The items are to be delivered to a specified place of performance in Groton, Connecticut, with the zip code 06340-4905, under the oversight of the Medical Supply Chain MD Surg FSF, a subdivision of the Department of Defense. The solicitation is classified as a subcontract and was posted on July 26, 2026, with responses due by August 3, 2026. The NAICS code 339113 identifies the industry as Medical Equipment and Supplies Manufacturing, confirming the nature of the product being procured. No set-aside type is specified, indicating the opportunity is open to qualified vendors without preference based on business size or category. All bids must comply with DLA’s stringent packaging and labeling protocols and ensure the product maintains its integrity and effectiveness through the full 60-month shelf life. Interested parties can access full details through the provided DIBBS portal link.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Medical Device Supply – Wrist/Forearm Brace (NSN: 6515017385237)The contract involves the supply and delivery of five units of a wrist/forearm brace identified by NSN 6515017385237, with full compliance required against FDA regulations, GMP standards, and DLA technical specifications. The product must be shipped FOB destination to Joint Base Pearl Harbor-Hickam, Hawaii, with inspection to occur upon arrival at the designated location, ensuring all items meet the specified quality and regulatory requirements. This subcontract is part of a broader military medical supply initiative under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, with a response deadline of August 3, 2026, and a NAICS code of 339112 indicating classification under medical appliance manufacturing. The delivery must align precisely with logistical and compliance protocols mandated by DLA, and failure to meet any technical or regulatory condition may result in rejection of the shipment.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Small Business Subcontracting & Compliance SupportThe contract is for administrative and compliance support focused on small business subcontracting, with specific emphasis on structuring joint ventures and managing reporting obligations under federal programs for Women-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone firms, and Small Disadvantaged Businesses. The work involves ensuring adherence to regulatory requirements and facilitating accurate documentation to maintain eligibility and maximize participation in set-aside opportunities across these categories. All services are tied to the NAICS code 541611, indicating management consulting services, and are to be performed at APO, ZIP 96260-5479, under the purview of the Department of Defense’s Medical Supply Chain MD Surg FSF office. Proposals must be submitted by the deadline of August 3, 2026, with the solicitation published on July 26, 2026, and the contract classified as a subcontract under a broader federal procurement framework. While no specific set-aside designation is identified, the scope mandates deep familiarity with Department of Defense subcontracting rules and the intricate reporting systems governing small business certifications. The effort will require a contractor capable of navigating complex federal compliance environments, maintaining current regulatory knowledge, and providing timely, accurate data to support ongoing subcontracting goals. The official solicitation can be accessed through the DIBBS platform using the provided link.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Sea Transportation of Medical SuppliesThe contract requires the sea transportation of medical supplies to APO 96260-5479, with the explicit mandate that all shipments must be carried on U.S.-flag vessels unless a documented waiver is granted in accordance with DFARS 252.247-7023. This requirement ensures compliance with U.S. maritime regulations and supports national security and logistical integrity by prioritizing domestically owned and operated shipping capacity for critical medical cargo destined for military personnel. The North American Industry Classification System code 483111 identifies the service as ocean transportation of goods, and the contract is categorized as a subcontract under the Department of Defense’s Medical Supply Chain MD Surg FSF. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, leaving a narrow window for interested parties to submit proposals. The place of performance is clearly defined as APO 96260-5479, a specific military postal address used to deliver supplies to U.S. forces overseas. Although the solicitation number and point of contact details are not provided, the official procurement portal link is available for further submission details. There is no set-aside type indicated, meaning the contract is open to all eligible contractors without preference based on business size or ownership category, and all bids must strictly adhere to the U.S.-flag vessel requirement as stipulated by federal regulation.

Deep Sea Freight Transportation

POSTED

DEADLINE