Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Medical Equipment Supply

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the supply of medical equipment housed in commercial exterior containers that must fully comply with Defense Logistics Agency technical and quality standards. All equipment must be accurately identified with verified source and part numbers to ensure traceability and compliance. The contractor is required to handle Covered Defense Information in accordance with applicable security protocols, ensuring data integrity and adherence to Department of Defense cybersecurity requirements. The equipment is intended for use within the Defense Medical Supply Chain and must meet stringent operational and logistical specifications. The solicitation is classified as a subcontract under NAICS code 339113, with a response deadline of July 27, 2026, and was posted on July 20, 2026. The contracting activity is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF organization. While specific performance locations and point of contact details are not provided, all deliveries and compliance activities must align with DLA directives. Bidders must access the official solicitation through the DIBBS portal to obtain complete requirements and submission guidelines.

General Info

Supply medical equipment in compliant containers with traceable parts, meet DOD cybersecurity and DLA standards for Defense Medical Supply Chain.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of medical equipment in commercial exterior containers compliant with DLA technical and quality standards, including source and part number identification and Covered Defense Information handling.

Similar Contracts

Same NAICS industry code

Supply of Pre-Cut Surgical Sponges (4x4 Inches)The contract calls for the manufacture or supply of pre-cut surgical sponges measuring 4x4 inches, packaged 25 per envelope, with a total order quantity of 600 boxes. These sponges must fully comply with DLA specifications to ensure suitability for use in medical procedures, emphasizing stringent quality and safety standards. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, as defined by FAR 19.5. The North American Industry Classification System code 339113 identifies the scope as医疗器械制造, specifically related to surgical and medical supplies. The contract was posted on July 20, 2026, with responses due by July 27, 2026, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. All deliveries are expected to meet the required specifications without exception, and the performance location is not specified, allowing flexibility for supplier fulfillment as long as compliance is assured.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Industrial Safety GogglesThe contract entails the procurement and delivery of 15 units of industrial safety goggles that comply with National Stock Number specifications for use at Naval Air Station North Island in California. Delivery is set under FOB Destination terms, meaning the supplier is responsible for all transportation costs and risks until the goods arrive at the specified location. The goggles must be packaged in accordance with military standards to ensure durability, protection, and compliance with defense logistics requirements. Each shipment must include traceable logistics documentation to enable full accountability from origin to final receipt. The contract falls under the NAICS code 339113, indicating it pertains to the manufacturing of other sporting and athletic goods, which in this context applies to specialized safety equipment. The award is issued as a subcontract through the Defense Logistics Agency, a component of the Department of Defense, and remains active under the referenced contract identifier.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Physical Therapy Exercise Bands (Medium Resistance, Green Latex, 9in x 2in)A single unit of medium resistance green latex physical therapy exercise bands measuring 9 inches by 2 inches is being procured under a subcontract solicitation issued by the Department of Defense through the Medical Supply Chain FSH. The product must fully comply with FDA regulations for medical devices and adhere to MIL-STD-2073-1E packaging standards and MIL-STD-129 labeling requirements to ensure uniformity and traceability within military logistics systems. Delivery is required at Rose Barracks in Germany within five calendar days of contract award, emphasizing urgency and precision in fulfillment. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, and falls under NAICS code 339113 for medical equipment and supplies manufacturing. All contractual obligations are bound by strict compliance with federal military standards and timelines.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Industrial Spectacles (ANSI Z87.1 Compliant)The contract entails the procurement and delivery of 16 units of industrial safety spectacles compliant with ANSI Z87.1 standards, intended for use by government entities under the Department of Defense. The items must meet stringent safety and performance requirements to ensure adequate eye protection in hazardous environments. Delivery is scheduled under FOB Destination terms, with the final destination specified as Duluth, Minnesota, meaning the supplier is responsible for all transportation costs and risks until the goods arrive at that location. The contract is classified as a subcontract under NAICS code 339113, which pertains to the manufacturing of eyewear and vision accessories. It was posted on July 20, 2026, and is managed by the Defense Logistics Agency. No set-aside criteria or specific contracting office details are provided, and no point of contact information is listed within the data.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Industrial Spectacles (NSN 4240016575292)The contract pertains to the procurement and delivery of two industrial spectacles identified by NSN 4240016575292 and part number MS02-KIT, with full traceability required for all components and manufacturing processes. Delivery is to be made FOB destination to Fort Stewart, Georgia, ensuring the items arrive at the specified location under the agreed terms. The acquisition is structured as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 339113, which classifies it within the manufacturing of medical, dental, and orthopedic appliances and supplies, reflecting the specialized nature of the protective eyewear. The solicitation was posted on July 20, 2026, and the contract is linked to award number SPE8EJ26F038K under the master contract SPE8EJ21D0036, indicating its place within a broader acquisition framework.

Defense Logistics Agency

POSTED

DEADLINE

Manufacturer of Breathing Apparatus (NSN 4240015791027)The contract calls for the manufacture and supply of 60 units of breathing apparatus specified under military standards and aligned with OEM requirements for Scott Technologies part number 200822-02, identified by NSN 4240015791027. The equipment must meet all technical and quality benchmarks established by the Department of Defense and be delivered to the designated place of performance in Tracy, California, with ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 339113, indicating the industrial classification for other miscellaneous fabricated metal product manufacturing, and is managed by DLA Dist San Joaquin, a logistics arm of the Department of Defense. Responses are due by July 23, 2026, with the announcement posted on July 20, 2026, allowing a limited window for interested parties to submit proposals. All units must be fully compliant with the referenced military specifications and original equipment manufacturer standards to ensure operational readiness and interoperability within defense systems.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Industrial Safety Spectacles (NSN 4240-01-678-6048)The contract specifies the procurement and delivery of four units of industrial safety spectacles identified by NSN 4240-01-678-6048, with strict compliance required to either ANSI or applicable military safety standards. These spectacles are intended for use in high-risk industrial or operational environments where eye protection is critical, and the product must meet rigorous quality and performance benchmarks established by recognized defense and occupational safety authorities. The contract is structured as a subcontract under the broader procurement framework managed by the Defense Logistics Agency, a component of the Department of Defense, indicating its alignment with military or federal supply chain needs. Issued on July 20, 2026, with the contract identifier SPE8EJ26F039L and associated with NAICS code 339113 which pertains to sporting and athletic goods manufacturing, this effort reflects a targeted acquisition to replenish or upgrade protective equipment inventory. The place of performance and point of contact details are not specified, suggesting the delivery may be directed to a central DLA distribution hub or designated military installation. The procurement is part of a larger system managed through the DIBBS platform, ensuring traceability and adherence to federal acquisition protocols.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Industrial Safety Spectacles (NSN 4240016307802)The contract requires the manufacture or supply of 25 units of industrial safety spectacles, identified by part number CH4701 and NSN 4240016307802, to meet Department of Defense specifications. Delivery is scheduled FOB destination no later than September 3, 2026, ensuring the product is received at the designated location under terms that assign risk and responsibility to the supplier until delivery is complete. The item falls under NAICS code 339113, categorizing it within the manufacturing of medical equipment and supplies, and is being procured as a subcontract by the Defense Logistics Agency on behalf of the Department of Defense. The award is linked to a specific contract and delivery identifier, indicating it is part of a larger procurement framework managed through DLA systems. No set-aside type is specified, suggesting the opportunity is open to all eligible contractors without preferential treatment.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Individual Medical and Surgical ComponentsThe contract seeks the manufacture or supply of individual disposable surgical components for use in operating room kits, including armboard covers, drawstring bags, lift sheets, mop heads, table pads, and straps, all meeting standardized medical and surgical requirements. These items are critical for maintaining sterile environments and procedural efficiency in military healthcare settings, and must comply with stringent quality and safety protocols consistent with Department of Defense standards. The solicitation falls under NAICS code 339113, indicating classification within the medical equipment and supplies manufacturing sector, and is structured as a subcontract opportunity within the Medical Supply Chain MD Surg FSF framework. The opportunity was posted on July 20, 2026, with a firm response deadline of July 27, 2026, and the place of performance is designated as FPO with ZIP code 96678-1704, suggesting delivery to overseas or military-operated medical facilities. The contract is managed through the Department of Defense’s Defense Logistics Agency procurement system, and interested parties must submit proposals via the DIBBS portal at the provided UI link. No set-aside provisions or special eligibility requirements are specified, meaning the opportunity is open to all qualified suppliers capable of meeting technical, logistical, and compliance obligations without geographic or size-based restrictions.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Operating Room Supply Kit Assembly and PackagingThe contract requires the assembly and packaging of disposable surgical components into complete operating room supply kits, each unitized for a single surgical case and prepared for delivery to military vessels. This work is critical to ensuring that frontline medical teams have properly configured, sterile, and ready-to-use equipment for surgical procedures in deployed or maritime environments. All components must meet strict military standards for quality, sterility, and organization to guarantee operational readiness and patient safety under demanding conditions. The solicitation is issued as a subcontract under the NAICS code 339113, which pertains to medical equipment and supplies manufacturing, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. The response deadline is July 27, 2026, with the place of performance designated as FPO 96678-1704, indicating delivery to a military fleet location. The work must be executed with precision to support the logistical needs of naval operations, ensuring kits are traceable, correctly labeled, and compliant with military supply chain protocols for rapid deployment.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Industrial Safety Goggles (NSN 4240014925722)The contract entails the procurement and delivery of five units of industrial-grade safety goggles identified by NSN 4240014925722 and part number 740-0191, with all units required to fully comply with the cataloged technical and safety specifications. Delivery is to be made FOB destination using a traceable express carrier to ensure secure and timed transit, with proper tracking and documentation throughout the shipping process. The solicitation falls under a subcontract with a NAICS code of 339113, indicating classification within the manufacturing of eyewear and related protective equipment. The awarding agency is the Defense Logistics Agency under the Department of Defense, and the contract was posted on July 20, 2026, with performance details unspecified beyond delivery terms. The transaction is referenced through the DIBBS system under contract number SPE8EJ21D0032 with delivery reference SPE8EJ26F037T and count 58835.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Latex-Free Airway Oral Devices with Bite BlockThe contract requires the manufacture and supply of sterile, disposable, latex-free airway oral devices specifically designed for newborns, featuring reinforced bite blocks and engraved millimeter markings for precise clinical use. Each device has a standardized length of 40mm and must comply with stringent military packaging and labeling standards to ensure compatibility with defense logistics systems. The product is classified under NAICS code 339113, indicating it falls within medical equipment manufacturing, and is intended for use within Department of Defense medical supply chains. Packaging must meet exacting requirements for sterility, durability, and traceability under operational conditions. The solicitation is issued as a subcontract under the Medical Supply Chain MD Surg FSF, with performance required at Sheppard AFB, Texas, 76311-3484. The opportunity was posted on July 20, 2026, and responses are due by July 27, 2026. This contract is not subject to any specific set-aside provisions, and while no point of contact is listed, interested vendors can access further details through the DIBBS platform using the provided UI link. All submissions must demonstrate adherence to technical specifications and military compliance to be considered for award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Hazard Communication and Labeling Compliance SupportThe contract requires the provision of hazard warning labels and regulatory documentation for surgical sponges to ensure full compliance with OSHA Hazard Communication Standards and Defense Federal Acquisition Regulation Supplement requirements. This subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program and is classified under NAICS code 541620, indicating it falls within the scope of scientific and technical consulting services. The work is intended to support the Department of Defense’s Medical Supply Chain by delivering accurate, compliant labeling and documentation that meets federal safety and procurement mandates for medical supplies used in military healthcare settings. All deliverables must be submitted by the response deadline of July 27, 2026, and the contract is issued under the solicitation number SPE2DS26T251W through the DLA DIBBS platform. The performance location and specific office address are not defined, suggesting the work may be performed remotely or at the contractor’s facility, with deliverables shipped or electronically transmitted to meet DoD supply chain needs. Compliance with labeling standards and regulatory documentation is critical to avoid delays in procurement and ensure safe handling of surgical products across military medical systems.

Environmental Consulting Services

POSTED

DEADLINE

Packaging, Labeling, and Distribution Services for Medical SuppliesThe contract entails providing comprehensive packaging, preservation, labeling, kitting, and logistics services specifically for surgical sponges, all in strict adherence to DLA standards including MIL-STD-2073-1E and MMS NO. 1. These services must ensure the integrity, sterility, and readiness of medical supplies throughout the supply chain, from initial handling to final distribution, meeting military-grade requirements for durability, traceability, and compliance. The work is subject to rigorous quality control protocols to guarantee that all packaged items are properly labeled, preserved against environmental degradation, and assembled into kitted units as specified for operational use. This is a subcontract issued under a Total Small Business Set-Aside, classified under NAICS code 493190, indicating it is reserved exclusively for small businesses. The solicitation is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office and is open for bids with a response deadline in July 2026. The place of performance and specific delivery locations are not detailed in the provided data, but the work is expected to support federal medical logistics operations. Bidders must demonstrate proven capability in handling sensitive medical materials under stringent regulatory standards and be prepared to operate within a secure, federally regulated distribution environment.

Other Warehousing and Storage

POSTED

DEADLINE

Domestic and Military Base Delivery LogisticsThe contract pertains to the domestic and military base delivery of medical devices to Fort Bragg, North Carolina, under FOB Destination terms, meaning full responsibility for transportation costs, risks, and chain-of-custody rests with the contractor until physical delivery is completed at the specified location. All logistical operations, including packaging, transit, handling, and final delivery, must ensure the integrity and security of sensitive medical equipment throughout the journey, with no transfer of risk or liability until the goods are received at the Fort Bragg facility. The work falls under NAICS code 484220, categorizing it as motor vehicle transportation for trucking services, but the nature of the cargo necessitates specialized handling protocols for medical devices. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is classified as a subcontract under the Department of Defense’s Medical Supply Chain MD Surg FSF. Performance is strictly limited to the Fort Bragg location with ZIP code 28310, indicating the delivery endpoint is non-negotiable and aligned with military operational requirements. The contract does not specify a set-aside type or organization type, suggesting it is open to general industry bidders, but compliance with defense procurement standards, security protocols, and medical logistics regulations is assumed. All proposals must address the end-to-end accountability required for delivering critical medical supplies to an active military installation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Material Compliance and Labeling ServicesThe contract for Hazardous Material Compliance and Labeling Services requires the provision of comprehensive hazard identification, safety data sheet preparation, and labeling services aligned with OSHA’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001. This includes thorough analysis to determine exemptions under the Federal Food, Drug, and Cosmetic Act, the Federal Insecticide, Fungicide, and Rodenticide Act, or the Consumer Product Safety Act to ensure regulatory accuracy and compliance. All deliverables must meet federal mandates for chemical safety communication, particularly for materials used within Department of Defense medical supply chains operating at Fort Bragg, North Carolina. The work is structured as a subcontract under NAICS code 541690, indicating it involves other scientific and technical consulting services, and is issued by the Medical Supply Chain MD Surg FSF under the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 27, 2026. Performance is localized at Fort Bragg with a ZIP code of 28310, and all activities must be conducted in full adherence to federal regulations governing hazardous material handling, documentation, and labeling without reliance on external citations or referenced documentation.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Medical Device Packaging and LabelingThe contract requires the sterile packaging and labeling of surgical suction tubes in strict compliance with DLA RP001 and MMS No. 1 standards, ensuring all products meet sterility requirements and shelf-life specifications throughout their duration. Hazard communication protocols must be fully adhered to, including proper labeling that conveys all necessary safety and handling information for end users in medical environments. The work is to be performed at Fort Bragg, North Carolina, with delivery expectations aligned to military supply chain demands. This is a subcontract under the Department of Defense’s Medical Supply Chain initiative, classified under NAICS code 325991 for other pharmaceutical and medicine manufacturing. Proposals must be submitted by July 27, 2026, with all packaging and labeling processes subject to rigorous quality control to support the Department of Defense’s surgical instrumentation readiness standards.

Custom Compounding of Purchased Resins

POSTED

DEADLINE

Surgical Suction Tube Manufacturing and AssemblyThe contract calls for the manufacture and assembly of 72-inch surgical suction tubes designed to meet stringent military and federal medical device standards, ensuring compliance with biocompatibility, dimensional accuracy, and materials specifications. These tubes are critical components intended for use in surgical environments where reliability, safety, and precision are non-negotiable, and all materials must adhere to applicable regulatory requirements for medical devices used by the Department of Defense. Production must be executed with strict quality controls to guarantee consistency and performance under operational conditions. This is a subcontract opportunity issued under the NAICS code 339112 for medical device manufacturing, with performance required at Fort Bragg, North Carolina, 28310. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, providing vendors with a one-week window to submit proposals. The contracting entity is the Medical Supply Chain MD Surg FSF under the Department of Defense, indicating the end-user is a military medical services unit. Interested subcontractors must ensure their capabilities align with the technical and compliance requirements outlined, as failure to meet these standards could result in rejection or non-compliance penalties.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Cybersecurity and CUI Protection SupportThe contract requires comprehensive cybersecurity compliance for systems handling Controlled Unclassified Information (CUI), mandating full implementation of the NIST SP 800-171 security controls to safeguard sensitive data. This includes establishing technical, administrative, and physical safeguards to ensure confidentiality, integrity, and availability of CUI, along with timely reporting of any cyber incidents in accordance with federal requirements. The scope applies to all systems and networks supporting operations under this subcontract, with an emphasis on continuous monitoring, risk mitigation, and adherence to the latest cybersecurity standards. The subcontract is issued under the NAICS code 541512 for computer systems design services, with performance located at Fort Campbell, ZIP 42223-5000, under the oversight of the Department of Defense’s Medical Supply Chain MD Surg FSF. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, indicating a tight turnaround for proposers to demonstrate capability in meeting stringent federal cybersecurity obligations. All responses must show proven experience with NIST 800-171 compliance, incident response protocols, and the ability to operate securely within a DoD environment.

Computer Systems Design Services

POSTED

DEADLINE

Packaging, Labeling, and Hazard Communication ComplianceThe contract requires compliance with federal and Defense Logistics Agency standards for the packaging, labeling, and hazardous materials documentation of medical devices, including the provision of Safety Data Sheets. All activities must adhere strictly to established regulatory frameworks to ensure safe handling, transportation, and use of medical products within the Department of Defense supply chain. The work is classified as a subcontract under NAICS code 541380 and is performance-based at Fort Campbell, with a requirement for all deliverables to meet precise quality and documentation thresholds. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, indicating a short but critical window for proposal submission. The contracting office operates under the Medical Supply Chain MD Surg FSF, a unit within the Department of Defense, and the place of performance is fixed at Fort Campbell with a specific zip code. While no set-aside type is specified, the contract is intended to support critical defense medical logistics and demands expertise in regulatory compliance, hazardous material handling, and medical device packaging standards.

Testing Laboratories and Services

POSTED

DEADLINE

Supply of Sterile Nasopharyngeal Airway (NPA) DevicesThe contract calls for the manufacture and supply of 75 sterile nasopharyngeal airway devices, specifically 28FR size with a trumpet design, engineered to be kink-resistant and free from latex and DEHP. Each device must be individually packaged to maintain sterility and meet all applicable medical marking standards. The products must comply with the Trade Agreements Act and be suitable for use in military medical environments. The requirement is issued under a subcontract type and falls under NAICS code 325620, indicating classification within the medical equipment and supplies manufacturing sector. The offering is managed by the Department of Defense through its Medical Supply Chain MD Surg FSF, with performance required at Fort Campbell, Kentucky, identified by the zip code 42223-5000. Interested parties must submit responses by the deadline of July 27, 2026, with the solicitation posted on July 20, 2026. The devices are intended for critical airway management applications and must satisfy strict quality and compliance benchmarks to ensure reliability and safety in battlefield and clinical settings.

Toilet Preparation Manufacturing

POSTED

DEADLINE

Small Business Representation and Certification SupportThe contract seeks a subcontractor to provide consulting and administrative support focused on enabling small businesses to gain representation and certification for federal contracting opportunities. Key services include assisting with SAM.gov registration, obtaining unique entity identifiers and CAGE codes, and securing certifications under SBA programs such as Women-Owned Small Business, Service-Disabled Veteran-Owned Small Business, and HUBZone. The support must ensure full compliance with federal requirements and timely submission of all documentation to qualify businesses for set-aside contracts. The work is tied to the Department of Defense’s Medical Supply Chain MD Surg FSF and will be performed at Pearl Harbor with a ZIP code of 96860-5033. The North American Industry Classification System code is 541611, indicating management consulting services. The opportunity is open for responses until July 27, 2026, with proposals due by 5:00 p.m. Eastern Time.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires specialized packaging, unit marking, and pallet-level labeling services that strictly adhere to MIL-STD-129, the DLA Medical Marking Standard No. 1, and RP001 packaging requirements to support military logistics and shipment operations. These services must ensure full compliance with Department of Defense standards for identification, traceability, and handling of medical supplies throughout the supply chain, with precise labeling at every level from individual units to entire pallets. The work is to be performed at Pearl Harbor, Hawaii, with a ZIP code of 96860-5033, indicating the logistical focus on a critical Pacific theater hub for military medical operations. This is a subcontract solicitation under NAICS code 561910, indicating classification within Miscellaneous Support Services, and was posted on July 20, 2026, with a response deadline of July 27, 2026. The contracting activity is managed by the Medical Supply Chain MD SURG FSF under the Department of Defense, emphasizing the critical nature of medical readiness and distribution. Although no point of contact or set-aside information is provided, the place of performance and standardized compliance requirements signal an urgent operational need for precision packaging and labeling that meets military-grade specifications without deviation.

Packaging and Labeling Services

POSTED

DEADLINE