Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Medical-Grade Packaging and Kit Assembly

Active

Federal

Response Deadline07/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the final packaging of two cuvettes and their respective caps per unit into sealed, bar-coded containers that must fully comply with MIL-STD-129 and MMS No. 1 standards for medical logistics. This work is part of a subcontract under the Medical Supply Chain MD Surg FSF program, managed by the Department of Defense, and specifically supports the logistical needs of military medical operations. All packaging must ensure product integrity, traceability, and readiness for immediate deployment, with barcoding enabling seamless inventory control and asset tracking throughout the supply chain. The place of performance is designated as FPO with a zip code of 96616, indicating operations are likely focused on overseas or mobile military logistics hubs. The solicitation was posted on July 23, 2026, with a response deadline of July 29, 2026, underscoring a tightly scheduled procurement timeline. The NAICS code 325188 identifies this as a contract for other pharmaceutical and medicinal product manufacturing, aligning the effort with high-precision medical device packaging. Compliance with military-grade standards is non-negotiable, and failure to meet these specifications could result in rejection of delivered units.

General Info

Package two cuvettes and caps per unit to MIL-STD-129 and MMS No. 1 standards for DoD medical logistics.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325188 - All Other Basic Inorganic Chemical ManufacturingView NAICS

Place of Performance

FPO, AP, 96616, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Final packaging of two cuvettes and caps per unit in sealed, bar-coded containers compliant with MIL-STD-129 and MMS No. 1 for medical logistics.

Similar Contracts

Same NAICS industry code

Silver Nitrate Applicator SupplyThe contract entails the supply of a finished chemical item identified as an APPLICATOR, SILVER NITRATE, requiring strict adherence to compliant handling and packaging protocols due to its sensitivity to light and corrosive properties, suggesting potential medical or wound-care applications. Delivery is specified as FOB destination, placing responsibility for transportation risks and costs on the supplier until the item reaches the designated delivery point at FPO with ZIP code 09583. The solicitation is structured as a subcontract under NAICS code 325188, which aligns with other chemical manufacturing activities, and is issued by the Department of Defense through its Medical Supply Chain Pharm FSA office. Interested parties must submit responses by the deadline of August 3, 2026, with the opportunity to engage through the official DIBBS procurement portal linked in the posting.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Supply of Sodium Hydroxide 50% Solution – Livingston Plant (LRWSS)The contract requires the delivery of 500,000 wet pounds of a 50% sodium hydroxide solution to the Livingston, TX facility operated by the Trinity River Authority of Texas, with all shipments must strictly comply with AWWA B501-13 and NSF-60 standards to ensure quality and safety for water treatment purposes. Temperature control is mandatory throughout transit to maintain the chemical stability and effectiveness of the solution, and failure to adhere to these specifications could result in rejection of the delivery. The solicitation is classified as a subcontract under NAICS code 325188, indicating it involves specialty chemical manufacturing, and responses are due by August 13, 2026, with the posting date listed as July 23, 2026, allowing vendors approximately four weeks to prepare and submit proposals. All shipments must be delivered to the designated location in Livingston, TX, and no additional set-aside provisions or agency-specific procurement preferences are specified.

Trinity River Authority of Texas

POSTED

DEADLINE

Supply of Sodium Hydroxide 50% Solution – Huntsville Plant (HRWSS)The contract involves the supply of 600,000 wet pounds of a 50 percent sodium hydroxide solution to be delivered to the Huntsville, Texas facility operated by the Trinity River Authority of Texas. The chemical must strictly comply with AWWA B501-13 and NSF-60 standards to ensure safety and quality for water treatment applications. Temperature control is required throughout transportation and storage to maintain solution integrity, and full certification documentation must accompany each delivery to verify conformance with all regulatory and performance specifications. The solicitation is structured as a subcontract with a response deadline of August 13, 2026, and falls under NAICS code 325188 for other chemical product and preparation manufacturing. The Trinity River Authority of Texas is the contracting entity, and performance is designated to occur at the Huntsville plant, though no specific delivery address or contact information is provided beyond the location.

Trinity River Authority of Texas

POSTED

DEADLINE

Supply of Sodium Hydroxide 50% Solution – Euless PlantThe contract requires the bulk supply and delivery of 1,947,476 wet pounds of a 50% sodium hydroxide solution to Euless, Texas, with strict adherence to AWWA B501-13 and NSF-60 standards to ensure water treatment safety and quality. The product must meet specified chemical purity requirements and maintain controlled temperature conditions throughout transportation and handling to preserve stability and efficacy. Delivery must be completed in accordance with the timeline and logistical parameters outlined by the Trinity River Authority of Texas, which is acting as the procuring entity for this subcontract under NAICS code 325188. The solicitation was posted on July 23, 2026, with a response deadline of August 13, 2026, at 5:00 PM Central Time, providing potential suppliers with a four-week window to submit proposals. The place of performance is clearly defined as Euless, TX, but no specific office address or point of contact details are provided in the data. The contract is structured as a subcontract, indicating it may be part of a larger procurement effort, and there is no set-aside designation specified, meaning all eligible vendors may compete. The offering entity is the Trinity River Authority of Texas, and while the full terms and conditions are accessible via an online portal, compliance with regulatory and technical specifications is mandatory for award consideration.

Trinity River Authority of Texas

POSTED

DEADLINE

Supply of Sodium Hydroxide 25% Solution – Euless PlantThe contract calls for the bulk supply and delivery of 2,925,682 wet pounds of a 25 percent sodium hydroxide solution to the Euless, Texas facility for use in water treatment operations. The delivery must be executed using temperature-controlled transportation to ensure the solution remains stable and effective throughout transit. Strict adherence to AWWA B501-13 and NSF-60 standards is required to guarantee the chemical’s purity, safety, and suitability for potable water applications. The product must meet or exceed all relevant industry specifications for handling, packaging, and quality assurance to ensure regulatory compliance and operational integrity at the treatment site. This subcontract is issued by the Trinity River Authority of Texas, with a response deadline of August 13, 2026, and was posted on July 23, 2026. The NAICS code 325188 identifies the industry classification as other basic inorganic chemical manufacturing, underscoring the chemical nature of the required supply. The place of performance is specifically designated as Euless, TX, and while no point of contact or detailed office address is provided, bidders are directed to the official procurement portal for further details and submission instructions. All proposals must demonstrate capacity to meet the volume, timing, and quality requirements without deviation.

Trinity River Authority of Texas

POSTED

DEADLINE

Supply of Mercury Components with Containment HousingThe contract entails the supply of pre-contained mercury modules or subcomponents engineered for integration into environmental seal assemblies, with stringent requirements for safe encapsulation and shock resistance to ensure operational integrity under demanding conditions. These components must be designed to prevent mercury leakage and withstand mechanical stresses, aligning with specialized safety and performance standards for defense applications. The delivery location is specified as Tracy, California, with a zip code of 95304-5000, indicating the place of performance for this subcontract. The NAICS code 325188 identifies the industry as other chemical product and preparation manufacturing, underlining the specialized chemical and mechanical nature of the components required. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and is issued under the Department of Defense through its Fluid Handling Division, signaling a critical procurement for defense infrastructure involving hazardous materials in controlled environments.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supplier of Mercury-Containing ComponentsThe contract seeks a small business supplier to provide internal valve components containing mercury, strictly adhering to NAVSUP 5100-003D standards for handling, reporting, and hazardous materials shipping. The requirement is issued under a total small business set-aside classification, ensuring exclusive eligibility for small businesses as defined by the SBA, with the NAICS code 325188 indicating classification under other chemical product and preparation manufacturing. All delivered components must meet rigorous hazardous material protocols due to the presence of mercury, requiring full compliance with federal hazardous materials transportation and environmental safety regulations. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Maritime Supply Chain under the Department of Defense, though specific performance location and point of contact details are未提供.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

in about 19 hours

Sodium Bisulfite SupplyThe contract titled Sodium Bisulfite Supply is a subcontract issued by the Macon Water Authority in Georgia for the supply and delivery of sodium bisulfite to be used in water treatment processes for dechlorination or pH adjustment. The solicitation was posted on July 23, 2026, with a response deadline of August 18, 2026, at 7:00 PM Eastern Time, providing potential suppliers with approximately four weeks to submit proposals. The NAICS code 325188 identifies the primary industry classification as Other Basic Inorganic Chemical Manufacturing, indicating the chemical nature of the procurement. Performance of the contract is expected to occur within the service area of the Macon Water Authority, though specific delivery locations are not detailed. The contract does not specify any set-aside provisions for small businesses or other designated categories, and no point of contact is listed in the available data. Interested parties must access the full solicitation via the provided Georgia state portal link to obtain detailed technical specifications, quantity requirements, delivery schedules, and compliance terms.

Macon Water Authority

POSTED

DEADLINE

Sodium Hypochlorite SupplyThe contract pertains to the supply and delivery of sodium hypochlorite solution for use in disinfection processes at water treatment facilities operated by the Macon Water Authority in Georgia. The solution is essential for ensuring the safety and potability of public water supplies through effective microbial control. Subcontractors are expected to meet strict quality and consistency standards for the chemical concentration, purity, and packaging requirements to ensure reliable performance in ongoing treatment operations. Delivery schedules must align with operational needs to maintain uninterrupted service and regulatory compliance. The solicitation is classified as a subcontract with a response deadline of August 18, 2026, and was posted on July 23, 2026. The NAICS code 325188 indicates the industrial classification for other chemical manufacturing, reflecting the specialized production and handling of sodium hypochlorite. The place of performance is localized within Georgia, though exact delivery locations are unspecified, suggesting distribution to multiple water treatment sites under the authority’s jurisdiction. Interested parties must submit proposals prior to the deadline and demonstrate capability in logistics, safety compliance, and consistent chemical supply to qualify for award.

Macon Water Authority

POSTED

DEADLINE

Liquid Chlorine Supply for Water TreatmentThe contract outlines the supply and delivery of liquid chlorine in ton containers specifically for use in disinfection processes at water treatment facilities operated by the Macon Water Authority in Georgia. The work is classified as a subcontract under NAICS code 325188, which corresponds to other chemical manufacturing activities, indicating that the chlorine must meet stringent quality and safety standards required for municipal water treatment. Performance of the contract is expected to occur within the jurisdiction of the agency, though no specific location beyond the state is provided. Bids must be submitted by August 18, 2026, with the solicitation posted on July 23, 2026, allowing potential suppliers approximately four weeks to prepare their proposals. There is no set-aside designation specified, meaning the contract is open to all qualified vendors regardless of business size or demographic status. All deliveries must comply with regulatory requirements for handling and transporting hazardous materials, and the chlorine must be packaged and transported in approved ton containers to ensure safe and uninterrupted service to the water treatment infrastructure. While no point of contact is listed, interested parties can find further details through the provided online portal.

Macon Water Authority

POSTED

DEADLINE

Hydrogen Peroxide Supply and DeliveryThe contract entails the annual supply and delivery of hydrogen peroxide solution for use in municipal water treatment operations under the jurisdiction of the Trinity River Authority of Texas. The vendor is responsible for providing the chemical in appropriate packaging, ensuring safe and timely transportation, and strictly adhering to all applicable chemical handling, storage, and regulatory compliance standards. The work must be performed to support ongoing water treatment processes, with emphasis on consistency, quality, and adherence to environmental and safety protocols. Performance is expected to span the full calendar year following award, with continuous delivery schedules to meet operational demands without interruption. The solicitation was posted on July 22, 2026, with a response deadline of August 12, 2026, and is classified as a subcontract under NAICS code 325188, which pertains to other chemical manufacturing. There is no specified set-aside or small business designation. The place of performance is not detailed beyond the agency’s jurisdiction in Texas, and no specific point of contact information is provided. All proposals must align with Trinity River Authority’s operational and safety requirements, and submission is handled through the designated procurement portal.

Trinity River Authority of Texas

POSTED

DEADLINE

Liquid Sodium Hypochlorite Supply (12.5%)The contract establishes a bulk supply agreement for 12.5 percent liquid sodium hypochlorite to be used for water disinfection at Trinity River Authority of Texas wastewater facilities. The product must fully comply with ANSI/NSF Standard 60 and American Water Works Association specifications to ensure safety and efficacy in treating wastewater. The solicitation is classified as a subcontract and was posted on July 22, 2026, with a firm response deadline of August 12, 2026, at 5:00 p.m. The North American Industry Classification System code 325188 identifies the category of chemical manufacturing pertinent to this procurement. All deliveries and performance are expected to occur at TRA-operated facilities within Texas, though specific location details are not provided. The contract is managed directly by the Trinity River Authority of Texas, and interested suppliers must submit proposals through the designated online portal by the stated deadline to be considered.

Trinity River Authority of Texas

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

Medical Device Supply – Wrist/Forearm Brace (NSN: 6515017385237)The contract involves the supply and delivery of five units of a wrist/forearm brace identified by NSN 6515017385237, with full compliance required against FDA regulations, GMP standards, and DLA technical specifications. The product must be shipped FOB destination to Joint Base Pearl Harbor-Hickam, Hawaii, with inspection to occur upon arrival at the designated location, ensuring all items meet the specified quality and regulatory requirements. This subcontract is part of a broader military medical supply initiative under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, with a response deadline of August 3, 2026, and a NAICS code of 339112 indicating classification under medical appliance manufacturing. The delivery must align precisely with logistical and compliance protocols mandated by DLA, and failure to meet any technical or regulatory condition may result in rejection of the shipment.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Small Business Subcontracting & Compliance SupportThe contract is for administrative and compliance support focused on small business subcontracting, with specific emphasis on structuring joint ventures and managing reporting obligations under federal programs for Women-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone firms, and Small Disadvantaged Businesses. The work involves ensuring adherence to regulatory requirements and facilitating accurate documentation to maintain eligibility and maximize participation in set-aside opportunities across these categories. All services are tied to the NAICS code 541611, indicating management consulting services, and are to be performed at APO, ZIP 96260-5479, under the purview of the Department of Defense’s Medical Supply Chain MD Surg FSF office. Proposals must be submitted by the deadline of August 3, 2026, with the solicitation published on July 26, 2026, and the contract classified as a subcontract under a broader federal procurement framework. While no specific set-aside designation is identified, the scope mandates deep familiarity with Department of Defense subcontracting rules and the intricate reporting systems governing small business certifications. The effort will require a contractor capable of navigating complex federal compliance environments, maintaining current regulatory knowledge, and providing timely, accurate data to support ongoing subcontracting goals. The official solicitation can be accessed through the DIBBS platform using the provided link.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Sea Transportation of Medical SuppliesThe contract requires the sea transportation of medical supplies to APO 96260-5479, with the explicit mandate that all shipments must be carried on U.S.-flag vessels unless a documented waiver is granted in accordance with DFARS 252.247-7023. This requirement ensures compliance with U.S. maritime regulations and supports national security and logistical integrity by prioritizing domestically owned and operated shipping capacity for critical medical cargo destined for military personnel. The North American Industry Classification System code 483111 identifies the service as ocean transportation of goods, and the contract is categorized as a subcontract under the Department of Defense’s Medical Supply Chain MD Surg FSF. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, leaving a narrow window for interested parties to submit proposals. The place of performance is clearly defined as APO 96260-5479, a specific military postal address used to deliver supplies to U.S. forces overseas. Although the solicitation number and point of contact details are not provided, the official procurement portal link is available for further submission details. There is no set-aside type indicated, meaning the contract is open to all eligible contractors without preference based on business size or ownership category, and all bids must strictly adhere to the U.S.-flag vessel requirement as stipulated by federal regulation.

Deep Sea Freight Transportation

POSTED

DEADLINE

Military-Grade Packaging and Preservation ServicesThe contract requests specialized packaging, preservation, and marking services for medical kits and components in full compliance with MIL-STD-2073-1E and MMS NO. 1 standards, ensuring durability, environmental protection, and traceability for military medical inventory. All work must meet exacting Department of Defense specifications for long-term storage and operational readiness, including materials, labeling, sealing, and humidity control procedures designed to safeguard sensitive medical equipment during transit and extended warehousing. The opportunity is structured as a subcontract under the MEDICAL SUPPLY CHAIN MD SURG FSF division of the Department of Defense, with performance required at the APO military address 96260-5479. Bidders must submit responses by August 3, 2026, following the solicitation linked through the DIBBS procurement portal, and are expected to possess expertise in military-grade packaging protocols and experience handling classified or sensitive medical supply chains. The NAICS code 385110 indicates this falls under medical equipment and supplies manufacturing, underscoring the technical and regulatory precision required for successful proposal submission.

POSTED

DEADLINE

Hazardous and Radioactive Materials Compliance & LabelingThe contract involves the provision of Safety Data Sheets and OSHA-compliant hazard labels for hazardous and radioactive materials, with additional requirements for MIL-STD-129 labeling where applicable. The work is scoped to ensure full compliance with federal safety and regulatory standards, particularly for materials requiring special handling due to radioactivity or chemical hazards. All deliverables must align with current OSHA regulations and military standards to support safe transportation, storage, and use within Department of Defense operations. This subcontract is issued under NAICS code 541620, indicating professional, scientific, and technical services related to environmental and safety compliance. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and performance is to be carried out at APO, 96260-5479. The contracting entity is the Medical Supply Chain MD Surg FSF under the Department of Defense, indicating this effort supports military medical logistics and supply chain operations. Contractors must be prepared to meet stringent documentation and labeling requirements for hazardous and radioactive substances in a defense context.

Environmental Consulting Services

POSTED

DEADLINE

Medical Device Component SupplyThe contract seeks the supply of individual components for catheterization kit assembly, specifically 100% silicone Foley catheters, Precision 400 urine meters, splash guard trays, and latex-free drainage bags, all of which must meet stringent medical device standards for safety and performance. These components are critical to ensuring sterile, reliable, and patient-safe urinary care solutions, with an emphasis on latex-free materials to accommodate allergy-sensitive users. The equipment is intended for integration into complete catheterization kits used in military medical settings, and all items must comply with applicable regulatory and quality assurance requirements. The opportunity is structured as a subcontract under the Department of Defense’s Medical Supply Chain program, with the place of performance designated as APO 96260-5479, indicating delivery to a military post office address for distribution across deployed operations. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, with the NAICS code 339113 identifying it as medical equipment manufacturing. There is no set-aside designation specified, meaning all qualified suppliers are eligible to compete, and the primary focus is on securing reliable, high-quality components to support consistent medical readiness for DoD personnel.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Urethral Catheterization Kit SupplyThe contract pertains to the supply of fully assembled urethral catheterization kits designed for medical use, each containing a Precision 400 urine meter, a Foley tray equipped with a splash guard, a 16 French 5 cc 100% silicone catheter, and a latex-free drainage bag, all of which must meet established medical device standards for safety and performance. The kits are intended for use in clinical environments where sterility, reliability, and compliance with regulatory requirements are critical to patient care. This is a subcontract opportunity issued under the Department of Defense's Medical Supply Chain, with the place of performance specified as APO, zip code 96260-5479. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, with the NAICS code 339112 indicating the industry category for medical appliance and equipment manufacturing. The contract does not specify a set-aside type or point of contact, and all prospective suppliers must ensure full compliance with the technical specifications and delivery requirements outlined in the solicitation through the provided DIBBS portal link.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Logistics and Delivery to Camp LejeuneThe contract requires the timely and secure delivery of packaged dental brushes to Camp Lejeune, North Carolina, under FOB Destination terms, meaning the seller assumes all costs and risks until the goods are received at the designated location. Transportation must include full tracking capabilities to ensure visibility throughout the shipment process, and all documentation must be submitted via WAWF/Invoice 2in1 to comply with Department of Defense procurement protocols. The delivery is classified as a subcontract under NAICS code 484220, which pertains to truck transportation of freight and parcels, and is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. All responses must be submitted by August 3, 2026, and the performance location is clearly defined as Camp Lejeune with ZIP code 28542.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of hazard classification, safety data sheet (SDS) and material safety data sheet (MSDS) preparation, and GHS-compliant labeling services for a dental brush, specifically when it is determined to be hazardous under OSHA or Department of Defense standards. The work must ensure full regulatory alignment with current safety and labeling requirements to meet federal compliance obligations, focusing on accurate identification and communication of chemical and physical hazards associated with the product. All deliverables must adhere strictly to global harmonization guidelines to support safe handling, storage, and use in military and medical environments. The solicitation falls under NAICS code 541620 and is issued as a subcontract by the Department of Defense through the Medical Supply Chain MD Surg FSF office. Performance is required at Camp Lejeune with a zip code of 28542, and responses must be submitted by August 3, 2026. The posting date is July 26, 2026, indicating a short turnaround window for qualified contractors to prepare and submit their proposals. This engagement is critical to supporting defense medical supply chain compliance and ensuring that all hazardous materials documentation meets DoD and federal workplace safety mandates.

Environmental Consulting Services

POSTED

DEADLINE

Dental Bristle Brush Supply and PackagingThe contract involves the manufacture or supply of mandrel-mounted dental bristle brushes specifically designed for polishing plastic dentures, requiring strict adherence to military packaging and labeling standards including DLA packaging guidelines and MIL-STD-129 for labeling, along with proper hazardous materials documentation to ensure safe handling and compliance. The items must be produced and delivered to meet exacting specifications for use in medical and dental care settings under the Department of Defense, with the place of performance designated as Camp Lejeune, North Carolina, 28542. The solicitation is structured as a subcontract under NAICS code 339114, which pertains to dental equipment and supplies manufacturing, and responds to procurement needs of the Medical Supply Chain MD Surg FSF. The proposal submission window opens on July 26, 2026, with a firm response deadline of August 3, 2026, leaving minimal time for qualifying vendors to prepare and submit bids. All suppliers must demonstrate capability in meeting federal defense logistics standards for packaging, labeling, and hazardous material reporting, in addition to producing brushes that meet functional requirements for denture polishing. No set-aside information is provided, indicating the opportunity may be open to all eligible subcontractors. Interested parties must access the official solicitation through the DIBBS portal using the provided link to review full technical and administrative requirements before the deadline.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Medical Product Labeling and Bar-CodingThe contract requires the application of MMS No. 1-compliant labels and barcodes to medical products and their packaging for delivery to the Department of Defense, ensuring full adherence to federal hazard communication standards. This includes accurate labeling for safety, identification, and tracking, with all markings meeting strict military specifications for legibility, durability, and regulatory compliance. The work must be performed in alignment with the MMS No. 1 standard, which governs the formatting, content, and placement of labels on medical items intended for DoD use. The solicitation is classified as a subcontract under NAICS code 323121, reflecting its focus on printing and related support activities. It is open for responses until August 3, 2026, with performance destined for APO 09227-0000. The activity is managed by the Medical Supply Chain MD Surg FSF within the Department of Defense, and bidders must ensure their processes support end-to-end traceability and compliance with military supply chain requirements for medical logistics.

Tradebinding and Related Work

POSTED

DEADLINE

Hazardous Materials Packaging and PreservationThe contract requires the design and supply of specialized packaging systems compliant with MIL-STD-2073-1E and DLA RP001 standards to preserve frozen human serum controls during international transport, ensuring a guaranteed 24-month shelf life under controlled conditions. The packaging must be engineered to maintain cryogenic integrity throughout shipment, withstand extreme environmental stresses, and meet strict hazardous materials handling protocols for global logistics. The solution must integrate robust thermal insulation, impact-resistant materials, and validated cold chain technologies to prevent degradation of the serum controls from production to final use. Performance is centered on the APO 09227-0000 location with delivery expected to support Department of Defense medical supply chains, specifically under the MEDICAL SUPPLY CHAIN MD SURG FSF. The effort falls under NAICS code 322291, indicating classification as other paper product manufacturing, and is structured as a subcontract opportunity with a narrow response window closing on August 3, 2026. All packaging systems must undergo rigorous validation to prove consistent performance across diverse climate zones and extended transit times, with compliance documentation and testing reports required to demonstrate adherence to military and logistics preservation standards without exception.

Sanitary Paper Product Manufacturing

POSTED

DEADLINE