This Government Contract opportunity from Department Of Defense was posted on August 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Medical-Grade Packaging and Kitting

Closed

Federal

Submission Closed08/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 325998

New

DIBBS

Supply of Single-Use Instant Heat Treatment PadsThis subcontract involves the manufacture and supply of single-use instant heat treatment pads for prime contractors supporting the Department of Defense Medical Supply Chain. The pads must be capable of reaching a temperature of 112 degrees Fahrenheit when activated at 75 degrees Fahrenheit. The provider is responsible for ensuring a 24-month shelf life and adhering to strict packaging and marking requirements according to MIL-STD-2073-1E, RP001, and Medical Marking Standard No. 1. Compliance with the Berry Amendment and Buy American Act is mandatory for this contract. Deliveries are to be made in cases of 24 pads on a FOB Destination basis. The place of performance is located in Perry Point, zip code 21902, under NAICS code 325998.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Silver Solder RMA Paste SupplyThis subcontract through the Defense Logistics Agency involves the supply of one bottle of Silver Solder RMA Paste intended for prime contractors supporting the USS Jason Dunham DDG 109. The material must strictly conform to ASTM B32 standards and be delivered with at least 85 percent of its remaining shelf life. Compliance requirements include providing safety data sheets per Federal Standard No. 313-E, adhering to labeling regulations under 29 CFR 1910.1200, and certifying that the product is mercury-free according to NAVSEA 5100-003D. Packaging must be completed using PPP-C186 jars in accordance with MIL-STD-2073-1E. The opportunity is categorized under NAICS code 325998, with a response deadline of November 2, 2026. Performance for this contract is designated for FPO 09567.

Defense Logistics Agency

POSTED

DEADLINE

Manufacturer/Supplier of MIL-SPEC Electrical Insulation TapeThis subcontract involves the manufacture and supply of 200 rolls of red-orange electrical insulation tape for prime contractors supporting DLA supply contracts. The tape must be produced to specific dimensions of 1 inch in width and 60 feet per roll, with a thickness ranging between 0.015 and 0.020 inches in accordance with MIL-I-22444C. The supplier is required to maintain ISO 9001:2015 certification and must perform first article testing per MIL-HDBK-831. All products must be packaged according to MIL-STD-129 and MIL-STD-2073-1E standards. This requirement is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Friction Lining Supplier (NSN 2530-01-354-0401)This subcontract involves the supply of 168 units of friction lining materials, specifically NSN 2530-01-354-0401, for prime contractors supporting DLA Weapons Support Land Supplier Operations. The materials must be manufactured or sourced to be free of asbestos and class I ozone-depleting chemicals. All units are to be delivered FOB Origin and must adhere to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. The project is managed under the Department of Defense with performance taking place in Anniston. To be eligible, the supplier must maintain ITAR/EAR compliance and hold certification under the US/Canada Joint Certification Program. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0330

Solicitation SPE8E6-27-T-0330 is a procurement for one bottle of Silver Solder, RMA Paste, conforming to ASTM B32 standards. The material is designated as a commercial item and must be delivered to the USS Jason Dunham DDG 109 by October 20, 2026, with a required delivery window of 20 days after order. A critical requirement is that the material must retain at least 85 percent of its shelf life, specifically 10 months or 3 quarters, upon receipt by the government. The contract mandates strict adherence to hazardous material protocols, including the submission of Safety Data Sheets per Federal Standard No. 313-E and labeling in accordance with 29 CFR 1910.1200. Packaging must comply with ASTM-D3951-15 and MIL-STD-2073-1E, utilizing glass or plastic jars that meet PPP-C186 requirements. Marking must follow MIL-STD-129 and MIL-STD-130N, including barcodes and MSL labels. Additionally, the contractor must ensure no mercury is intentionally added to the supplies per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. While this is not a small business set-aside, a price evaluation preference is available for SBA-certified HUBZone small businesses. The procurement is subject to various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and prohibitions on additive manufacturing processes. Inspection and acceptance will occur at the destination.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-6253

Solicitation SPE4A6-27-T-6253 is a procurement by the Defense Logistics Agency (DLA) for one Antifreeze Recycler kit, identified as NSN 4250-01-380-9047 and part number CC-1-ULG COOL/R CLEAN/R. The requirement is for a single unit to be delivered to Jonesboro, Arkansas, with an original required delivery date of February 27, 2026, and a delivery window of 20 days after order. This is not a small business set-aside, and it falls under NAICS code 325998. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Because the item is classified as hazardous material, the contractor must provide Safety Data Sheets (SDS) and OSHA hazard warning labels, which must be approved by technical personnel prior to the award. Quality assurance will be managed via MIL-STD-1916 or ASQ H1331 zero-based sampling plans. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with the Buy American Act and DFARS regulations regarding covered telecommunications equipment. Item Unique Identification (IUID) is not required for this procurement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Neleom Shellfish Testing Performance Evaluation SamplesThis subcontract involves the supply of specialized laboratory samples for prime contractors working on Alabama Clinical Laboratory Services shellfish testing projects. The scope of work requires the delivery of four units of item R4807000, with each unit containing five samples in the Qualti-Cult Format. To ensure proper implementation, the provider must include rehydration instructions, report forms, and detailed reporting directions, all while adhering to Neleom Performance Evaluation Program specifications. The completed sample units and all associated documentation must be delivered to Mobile, Alabama. This procurement is categorized under NAICS code 325998 and is managed by the Alabama Clinical Laboratory Services. Interested parties should note the response deadline of October 26, 2026.

Clinical Laboratory Services

POSTED

DEADLINE

Supply of Industrial Cleaning Agents and BiocidesThis subcontract opportunity with the Department of Defense involves the supply of industrial cleaning agents, biocides, and detergents for prime contractors operating at the W6QM Micc Fdo Ft Bragg facility. The scope of work includes providing specialized chemicals designed for the removal of oil, gum, dirt, and graffiti from various surfaces, including metal, wood, and masonry. To ensure full compliance with environmental regulations, the provider must deliver approved cleaning chemicals along with comprehensive Safety Data Sheets for all supplied products. The project is designated as a Historically Underutilized Business Zone set-aside under NAICS code 325998, with performance taking place in Fort Bragg, North Carolina. Interested parties must submit their responses by November 23, 2026.

W6QM Micc Fdo Ft Bragg

POSTED

DEADLINE

Pyrophoric Device Demonstration

Solicitation # N00164269W051

The Department of Defense, specifically through NSWC Crane, is seeking a new supplier to develop and demonstrate expendable pyrophoric countermeasures for the Department of War Joint Services. This initiative supports the US Navy, US Marine Corps, Army, Air Force, SOCOM, and AFSOC by providing critical infrared threat protection. These countermeasures are designed to act as decoys that confuse missile seeker logic, drawing surface-to-air and air-to-air threats away from aircraft to ensure pilot and platform safety. This special notice, solicitation number N00164269W051, focuses on maintaining a viable source for essential devices such as the M211 and various MJU series countermeasures. The project will be performed in Crane, Indiana, under NAICS code 325998. Interested parties must respond by October 28, 2026, to support the multi-layer defense strategy required to counter both legacy and advanced infrared missile threats.

POSTED

DEADLINE

66--***RFI ONLY***Sources Sought for Cordierite powder

Solicitation # 68HE0M27Q0004

The Environmental Protection Agency is issuing a Request for Information under solicitation number 68HE0M27Q0004 to conduct market research for the purchase of 2.5 kg of cordierite powder. The required material is an off-white magnesium iron aluminum silicate powder with a size of 1 to 5 microns, a bulk density of 0.42 g/cubic centimeter, and a melting point between 1179 and 1471 degrees Centigrade. This is a sources sought notice for a commercial off-the-shelf product, and the agency is seeking to identify capable vendors regardless of business size. Interested parties are encouraged to respond with their contact information and technical specifications, though pricing and formal capability statements are not required. This RFI is for informational purposes only and does not constitute a solicitation or a guarantee that a contract will be awarded.

Mi - Co Office Labor - Ann Arbor

POSTED

DEADLINE

Supply of Bio-Mitigation Materials and EquipmentThis subcontract involves the procurement and delivery of specialized bio-mitigation materials and equipment, including bio-filtration media, for prime contractors working on projects for the Colorado Energy Office. The selected provider is responsible for supplying all materials specified in the project exhibits and ensuring that all deliveries meet strict compliance standards. A critical requirement of the contract is the provision of Build America Buy America certification for all materials and equipment. Additionally, the contractor must submit detailed sales invoices that explicitly list the model and serial numbers for all supplied items to ensure full accountability and regulatory adherence.

Governor - Colorado Energy Office

POSTED

DEADLINE

***RFI ONLY***Sources Sought for Cordierite powder

Solicitation # 68HE0M27Q0004

The Environmental Protection Agency, through the OAR SACO Contracting Office, has issued a Request for Information (RFI) under solicitation number 68HE0M27Q0004 to identify vendors capable of providing cordierite powder. This is a market research effort for a commercial off-the-shelf product and does not constitute a binding contract or a guarantee of a future award. The agency is seeking 2.5 kg of off-white cordierite powder with a particle size of 1-5 microns, a bulk density of 0.42 g/cubic centimeter, and a melting point between 1179 and 1471 degrees Centigrade. Interested vendors, regardless of size, are encouraged to respond by providing their contact information and any relevant technical specifications. No capability statement or pricing is required at this time. Responses should be submitted via email to OARSACO@epa.gov with the subject line RFI: 68HE0M27Q0004. The response deadline is November 3, 2026, and the place of performance is listed as Ann Arbor, Michigan. All costs associated with responding to this RFI are the responsibility of the vendor.

Oar Nvfel Saco

POSTED

2 days ago

DEADLINE

in 10 days

AI Contract Overview

This subcontract opportunity, issued by the Department of Defense under the Medical Supply Chain MD Surg FSF, involves the commercial packaging and kitting of sterile drainage tubes. The selected provider will be responsible for ensuring all items are placed in sealed unit containers that strictly adhere to DLA RP001, ASTM D3951, and MIL-STD-129 standards, with comprehensive requirements for labeling and palletization. The project will be performed in San Antonio, Texas, under NAICS code 325998. Interested parties must submit their responses by the deadline of August 31, 2026, following the posting date of August 25, 2026.

General Info

DoD subcontract for sterile drainage tube packaging and kitting in San Antonio, Texas.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation Manufacturing

Place of Performance

SAN ANTONIO, TX, 78226, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-26-T-366J.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE, DRAINAGE, SURGICAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 25

subcontract

Response DeadlineAug 31

Deadline has passed

Submission Closed

08/31/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Office AddressN/A

ContactsNo contact information available

Full Description

Commercial packaging and kitting of sterile drainage tubes in sealed unit containers compliant with DLA RP001, ASTM D3951, and MIL-STD-129, including labeling and palletization.