Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Medical Item Labeling and Barcoding

Active

Federal

Response Deadline07/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires compliance with MMS No. 1 for the labeling of medical electrode pads and their shipping containers, mandating the inclusion of a 2D Data Matrix barcode along with the National Stock Number, lot number, and expiration date on each item. This labeling standard ensures traceability and regulatory compliance across the supply chain. The work is classified as a subcontract under NAICS code 323120, focused on medical equipment manufacturing and labeling operations. Performance is designated for Fort Bragg, North Carolina, with a response deadline of July 29, 2026, and the solicitation was posted on July 23, 2026, under the authority of the Department of Defense through the Medical Supply Chain MD Surg FSF. All labeling must meet exacting military specifications to support logistical and inventory accuracy in field operations.

General Info

Medical electrode pads must comply with MMS No. 1 labeling including 2D barcode, NSN, lot, and expiration date for Fort Bragg delivery by July 29, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

323120 - Support Activities for PrintingView NAICS

Place of Performance

FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 05:00:00 PM UTCin about 23 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Labeling per MMS No. 1 including 2D Data Matrix barcodes, NSN, lot number, and expiration date on electrode pads and shipping containers.

Similar Contracts

Same NAICS industry code

Bid for: SERVICE MAINTENANCE, PROGRAMMING, PERIPHERAL SUPPLIES, AND BALLOT PRINTINGBids for SERVICE MAINTENANCE, PROGRAMMING, PERIPHERAL SUPPLIES, AND BALLOT PRINTING must be submitted electronically through the Bid Net Portal by 11:00 a.m. on Monday, August 10, 2026, with the solicitation number BD-27-1143-PRO15-PRO15-131734. The bid opportunity is managed by the Procurement Department of the City of Brockton, Massachusetts, and all responses must be directed to the designated portal; inquiries should be sent to procurement@brockton.gov. The work will be performed at the agency’s office located at School Street, Brockton, MA 02301, and no set-aside classification applies to this solicitation. Donnette McManus serves as the primary point of contact with the title of Purchaser, and bidders are encouraged to review full details via the provided Commbuys link.

PRO15 - Procurement Department

POSTED

DEADLINE

Medical-Grade Labeling and Marking ServicesThe contract pertains to the production and application of medical-grade labels that adhere to Medical Marking Standard No. 1, requiring precise inclusion of the date of manufacture, expiration date, contract number, lot number, and NSN on each label. This work is critical for ensuring traceability, compliance, and operational readiness within military medical supply chains. All labeling must meet strict federal standards for clarity, durability, and accuracy to support logistical and safety requirements in healthcare and field deployment environments. The solicitation is issued under NAICS code 323120 for printing and related support activities, specifically designated as a subcontract opportunity. The place of performance is fixed at Groton, Connecticut, with a response deadline of August 3, 2026, and the posting date was July 26, 2026. The contracting entity is the Department of Defense through the Medical Supply Chain FSH office, indicating this effort supports defense medical logistics infrastructure. Contractors must ensure full compliance with standardized labeling protocols without exception, as noncompliance may compromise supply chain integrity and mission success.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Specialized Medical Packaging and Labeling ServicesThe contract requires specialized medical packaging, preservation, and labeling services for the Lindemann Cutter in full compliance with MIL-STD-2073-1E, MMS No. 1, and RP001 standards. This includes sealing the product in approved containers, applying accurate barcoding for tracking, and incorporating proper hazard labeling to ensure safety and regulatory adherence throughout the supply chain. All packaging must meet stringent military and medical device requirements for preservation, integrity, and identification during storage and transport. The work is classified as a subcontract under NAICS code 323120 and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. The place of performance is FPO with ZIP code 09566-4008, indicating operations may involve overseas or expeditionary logistics. The solicitation was posted on July 23, 2026, with responses due by July 29, 2026, and all submitted proposals must align precisely with the stated technical and compliance specifications to be considered.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

in about 23 hours

Medical Product Labeling and MarkingThe contract pertains to the labeling of medical chemical containers in full adherence to Medical Marking Standard No. 1, requiring durable barcoding and compliance with all applicable transport regulations to ensure safety and traceability throughout the supply chain. The work involves precise application of labels that meet strict durability and legibility standards, essential for handling hazardous and critical medical substances within military and healthcare environments. This subcontract is issued under the NAICS code 323120 and is performance-based at Fort Bliss, Texas, with a zip code of 79916-2527. The solicitation was posted on July 23, 2026, and bids are due by July 29, 2026. The contracting entity is the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF, indicating the scope is tied to defense medical logistics. All labeling must align with federal and defense-specific standards to support operational readiness and regulatory compliance.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

in about 23 hours

Medical Item Marking and Labeling ServicesThe contract requires the application of compliant markings on medical items in accordance with Medical Marking Standard No. 1, ensuring all items are properly labeled with the National Stock Number, contract number, and a two-dimensional Data Matrix barcode to support full traceability throughout the supply chain. This work is essential for maintaining accountability, compliance, and operational readiness within the Department of Defense medical logistics network. The markings must be durable, legible, and accurately represent the required data to enable automatic identification and inventory management in field and garrison environments. The solicitation is classified as a subcontract under NAICS code 323120 and is managed by the Medical Supply Chain FSH under the Department of Defense, with performance required at Fort Bragg, North Carolina, 28310. The opportunity was posted on July 23, 2026, with a response deadline of July 30, 2026, indicating a short turnaround time for qualified vendors to submit proposals. Although no specific set-aside or point of contact details are provided, the contract is accessible through the DIBBS portal using reference number SPE2DH26T5425 for further documentation and submission guidelines.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Medical Product Labeling and Marking ComplianceThe contract requires full compliance with Medical Marking Standard No. 1 for labeling medical products, incorporating barcoding systems and hazardous material labeling that meet both OSHA and Department of Defense specifications. All labeling must be accurately applied to ensure traceability, safety, and regulatory alignment across the military medical supply chain. The work is to be performed at Fort Bliss, Texas, with a ZIP code of 79916-2527, and the contract is issued under NAICS code 323120, indicating a focus on photofinishing and medical labeling services. This is a subcontract opportunity under the Department of Defense, managed by the Medical Supply Chain MD SURG FSF, with a solicitation response deadline set for July 29, 2026, and the solicitation was posted on July 23, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

in about 23 hours

Medical Packaging and Labeling Compliance ServicesThe contract requires the provision of medical packaging, preservation, and labeling services that fully comply with Department of Defense standards, including the application of 2D Data Matrix barcodes in accordance with MMS No. 1 and proper hazardous material labeling as mandated. All services must ensure the integrity, traceability, and regulatory compliance of medical supplies throughout the supply chain, with strict adherence to military-specific packaging and labeling protocols. The work is designated as a subcontract and is focused on supporting operations tied to Fort Bliss, Texas, where all performance activities must be conducted. The solicitation was posted on July 23, 2026, with a deadline for responses set for July 29, 2026, and is managed under the NAICS code 323120 for medical equipment and supplies manufacturing. The contracting authority is the Medical Supply Chain MD Surg FSF, operating under the Department of Defense, and the services are critical to maintaining operational readiness through compliant medical logistics. Contractors must demonstrate capacity to meet DoD requirements for durability, safety, and identification standards without exception.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

in about 23 hours

Military-Grade Marking and LabelingThis contract requires the application of standardized military markings in full compliance with MIL-STD-129, encompassing the assignment and placement of National Stock Numbers, Unique Identification markers, and all other mandated military logistics codes to ensure seamless integration into defense supply chains. The work must be executed with precision to meet rigorous Department of Defense specifications for asset tracking, inventory management, and field logistics operations, with all labeling requirements designed for durability and compatibility with automated scanning systems across military installations worldwide. The contract is a subcontract under the NAICS code 323120 for Printing and Related Support Activities, issued by the Fluid Handling Division of the Department of Defense, with performance required at a designated location in Tracy, California, zip code 95304-5000. Bids must be submitted by the response deadline of August 3, 2026, and the solicitation is open for participation without specific set-aside status. The contract is administered through the DIBBS platform, and compliance with technical, logistical, and documentation standards will be strictly enforced to support the Department’s operational readiness and accountability mandates.

FLUID HANDLING DIVISION

POSTED

DEADLINE

High-Volume Label Manufacturing & PrintingThe contract requires high-volume manufacturing and printing of military-compliant labels featuring 2D Data Matrix barcodes for precise tracking and inventory management. All labels must adhere to MIL-STD-129 standards for labeling of military shipments and include shelf-life tracking capabilities to ensure compliance with expiration and usage protocols. Hazard communication requirements must also be met, ensuring that all labels clearly convey safety and handling information for hazardous materials. The work is scoped to support the Department of Defense through its Barstow Central Receiving Warehouse, with performance localized to Barstow, California, under the NAICS code for commercial printing. The contract is structured as a subcontract, with a response deadline of August 3, 2026, and was posted on July 23, 2026. The supplier is expected to deliver large quantities of accurately printed, durable, and compliant labels suited for demanding military logistics environments. While no specific set-aside provisions are indicated, the work supports a critical Defense Logistics Agency function, making technical accuracy, regulatory adherence, and timely delivery essential. The facility must be equipped for high-volume label production with quality controls to guarantee barcode scannability, material durability, and full alignment with federal military standards.

BARSTOW CENTRAL RECEIVING WHSE

POSTED

DEADLINE

MIL-STD-129 Marking and Barcoding ServicesThis contract requires the application of durable, machine-readable markings in compliance with MIL-STD-129 standards for defense-related items. The work involves tagging and labeling products with essential identifiers such as the National Stock Number, Contract Line Item Number, and the specific contract number, along with properly formatted barcode labels to ensure accurate tracking and inventory management throughout the logistics chain. All markings must be robust enough to withstand environmental conditions and handling typical in military supply operations. The contract is classified as a subcontract under NAICS code 323120, issued by the Defense Logistics Agency under the Department of Defense, with performance required at Aberdeen Proving Ground, Maryland, ZIP code 21005-5059. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. The procurement is aimed at ensuring end-to-end visibility of military logistics through standardized, automated identification systems, reinforcing compliance with DoD marking protocols to support supply chain efficiency and accountability.

Defense Logistics Agency

POSTED

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThe contract requires comprehensive packaging, labeling, and kitting services for O-rings under strict Department of Defense standards, with all work destined for Tinker Air Force Base, specifically identified by the ZIP code 73145-8000. All products must be prepared using durable, scannable labels that ensure accurate tracking and inventory management throughout the supply chain, while also fully complying with hazard communication requirements to safeguard handling and usage. The work must adhere to NAICS code 323120, indicating specialized manufacturing services for packaging and labeling, and is structured as a subcontract under the Land Supply Chain division of the Department of Defense. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and performance is expected to meet the rigorous quality and compliance benchmarks mandated by federal defense logistics protocols.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Enhancement for Dept of Building's purchase of stickers to post on vacant buildings per Section 4(c) of D.C. Law 22-287.The Department of Buildings in the District of Columbia is forecasting a procurement to enhance its ability to post stickers on vacant buildings in accordance with Section 4(c) of D.C. Law 22-287. This action supports compliance with local regulations requiring visible indicators of building vacancy status, likely aimed at improving public safety, code enforcement, and transparency for residents and stakeholders. The contract will cover printing services necessary to produce these stickers, though specific quantities, design specifications, or delivery timelines are not detailed in the forecast. This procurement is currently listed as a forecast with no solicitation number, set-aside classification, or NAICS code provided, indicating it is in an early planning phase. The posting date indicates the forecast was published in July 2026, and all performance is expected to occur within the District of Columbia. Interested vendors should monitor for a future formal solicitation to submit proposals for the printing and delivery of compliance stickers. The contract is not yet active, and no point of contact information is available at this stage.

Department Of Buildings (DOB)

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

CASE, AED, SEMI RIGIDThe contract specifies the procurement of two semi-rigid carry cases designed exclusively for the PowerHeart G5 AED, featuring an adjustable shoulder strap, a side D-ring for attaching the PowerHeart Ready Kit, and a back pocket for storing extra pads and emergency supplies. The case is engineered to maintain clear visibility of the AED’s status indicator and pad expiration date at all times. Each unit must be packaged in a sealed commercial container that protects against damage and complies with the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging and shipping must ensure safe delivery by the lowest-cost carrier to the specified destination in Norfolk, Virginia, using traceable freight methods only—parcel post is prohibited. The item is not regulated by the FDA and must be marked per the latest MMS No. 1 guidelines, with sourcing and part number XCAAED004A from ZOLL Medical Corporation identified by the bidder. Delivery is required within 20 days of contract award, with no variance in quantity allowed, and inspection and acceptance occur at the delivery point.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

GLOVE, NITRILEThe contract is for the procurement of 12 boxes of nitrile patient examination gloves, each box containing 90 gloves, with specifications requiring the gloves to be textured for enhanced wet and dry gripping, longer and thicker than standard exam gloves, form-fitting with an extended beaded cuff, ambidextrous, non-sterile, disposable, latex-free, powder-free, and sand-colored in size X-large. The item is identified by NSN 8415-01-600-6052 and delivered FOB destination to a specified address in Boise, Idaho, with a strict delivery requirement of 20 days after award. Packaging must comply with DLA Packaging Requirements for Procurement (RP001), ASTM D3951 for non-hazardous materials, and MIL-STD-129 or Medical Marking Standard No. 1 for medical items, including mandatory barcoding and labeling per government standards. The gloves are non-hazardous and do not require hazardous material packaging controls under FED-STD-313 or TQ IP025. Invoicing and payment processing are exclusively through Wide Area WorkFlow (WAWF), and acceptance of goods occurs at the delivery point by government representatives under FAR 52.246-2. The solicitation, issued by the Department of Defense’s Medical Supply Chain, requires offerors to provide their Unique Entity ID and CAGE code and to certify their small business status and compliance with socioeconomic programs. All contractors must adhere to stringent cybersecurity requirements under DFARS 252.204-7012, including safeguarding covered defense information and reporting cyber incidents, as well as prohibitions on using equipment or services from designated foreign telecommunications vendors. Compliance with whistleblower protections, restrictions on compensation of former DoD officials, and requirements for hazard communication labeling are mandatory. The contract incorporates numerous FAR and DFARS clauses including those related to trafficking in persons, employment eligibility, sustainable products, hazardous material identification, and subcontracts for commercial services. No unit prices or contract value are provided in the solicitation, and award will be based on the lowest price technically acceptable response. All submissions must be made electronically via the DIBBS portal by the closing date of July 30, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

WICK, EARThe product is a sterile, latex-free, non-lining, and non-adherent ear wick designed specifically for otolaryngology procedures, particularly for the treatment of otitis externa. It features high absorbency, is non-traumatic, virtually lint-free, and compressed for ease of use, ensuring minimal discomfort and optimal performance during surgical or clinical applications. The item is not made with natural rubber latex, meeting strict safety standards for sensitive users. Each unit of issue is a case containing 100 wicks, identified by NSN 6510-01-724-9619, with a single case ordered under purchase request 7017625843. Delivery is required within 20 days of award. This solicitation, identified as SPE2DS-26-T-275F, was posted on July 27, 2026, with responses due by August 3, 2026. The procurement falls under NAICS code 322291 and is managed by the Department of Defense via the Medical Supply Chain MD Surg FSF. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, with packaging governed by DLA standards and specific protocols for removal of government identification from non-accepted supplies. The point of contact is Kendall Jones, reachable via email and phone, and the place of performance is FPO with ZIP 96694. The solicitation is open to federal contractors under no set-aside designation.

Sanitary Paper Product Manufacturing

POSTED

DEADLINE

CATHETER, INTRAVENOUSThe contract is for the procurement of 3 packages of intravenous safety catheters, each package containing 200 units, with a total quantity of 600 catheters. Each catheter is a 16-gauge, 1.25-inch straight needle with a passive safety design featuring a push-off plate on the hub that automatically engages the safety clip when the bevel exits the catheter hub; the bevel orientation is visibly indicated on the push-off plate. The catheter is constructed from fluorinated ethylene propylene (FEP) polytetrafluoroethylene and is available without wings, enclosed in a plastic polyurethane overall. The product is sterile and intended for intravenous injection. The unit of issue is PG/200 each, and delivery is required within 20 days of award. The item is identified by NSN 6515-01-488-4971 under solicitation SPE2DS-26-T-276C, with bids due by August 3, 2026. Technical and quality requirements referenced in the DLA Master List apply, and packaging must comply with DLA standards. Covered defense information may apply, and government identification must be removed from any non-accepted supplies. The procurement is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance occurring at FPO, ZIP 96694. Bidders must specify the source and part number being supplied.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

WHOLE BLOOD COLLECTThe Whole Blood Collect kit is a compact, vacuum-sealed system designed for field forward missions in remote and austere environments, enabling the safe collection and transfusion of fresh whole blood without reliance on traditional blood bank infrastructure. It meets or exceeds current blood bank standards, military guidelines, and training protocols, ensuring clinical compliance and operational readiness. The kit functions as a standalone skill set module, providing all essential components needed for in-the-field blood donation and transfusion procedures, and is also suitable for training and instructional use. Included are an oral questions form, DD572, Standard Form 518, and a field blood transfusion unit, all integrated into a single, ready-to-deploy package. The contract, solicited under SPE2DS-26-T-275C, is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a place of performance at Camp Pendleton, California. A quantity of 50 units is required, to be delivered within five days of award, under purchase request 7017595160. The National Stock Number for the item is 6515-01-657-4750, classified under NAICS code 339112. The solicitation was posted July 27, 2026, with responses due by August 3, 2026, and the primary point of contact is Michael Small, reachable via email and phone for procurement inquiries.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

TUBING, SURGICALSurgical tubing made of plastic with a 3/16 inch inner diameter is being procured under contract SPE2DS-26-T-276L, with the manufacturer part number 0048250 from CONMED Corporation. The item is supplied in 100-foot coils, with a total quantity of 25 coils required, and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951 and MIL-STD-129. Packaging must adhere to the Medical Marking Standard No. 1, with each unit sealed in a protective container and shipped in suitable commercial exterior packaging to ensure safe delivery at the lowest freight cost. The product is regulated by the FDA, requiring a referral to the product specialist in EBS prior to award, including bidder and manufacturer details. Delivery is FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination point. All packaging and marking must follow the DLA-defined medical standards, and physical shipment must be sent via traceable freight methods, not parcel post. The delivery address is Scott AFB, Illinois, with a required original delivery date of July 29, 2026, and the contract is managed by the Department of Defense Medical Supply Chain under the NAICS code 339112.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

CAP, SYRINGEThis contract specifies the procurement of sterile Luer-lock tip syringe caps in red, manufactured by Baxter Healthcare Corporation with part number H93865001 and NSN 6515-01-252-7552. The item is classified as a Type I CODE S medical device with a fixed 60-month shelf life that cannot be extended, and it is subject to FDA regulation requiring confirmation referral through EBS prior to award. Each procurement unit is defined as a packing group (PG) containing 100 individual caps, with a total quantity of one PG ordered. The item must be packaged in commercial-grade sealed unit containers and shipped in suitable exterior containers to ensure safe delivery at the lowest carrier rate, compliant with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging and marking must adhere to MIL-STD-2073-1E and include no government identification on non-accepted supplies. The contract mandates strict adherence to DLA’s technical and quality requirements as listed in their Master List and requires bidders to clearly identify the source and part number being offered. Delivery is due within 20 days FOB destination, with zero tolerance for variance in quantity and final inspection and acceptance occurring at the delivery point. The procurement is governed by solicitation SPE2DS-26-T-274M, issued by the Department of Defense, Medical Supply Chain, with performance located at Nellis AFB, 89191.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

SPONGE, SURGICALThe contract solicitation SPE2DS-26-T-251W is for the procurement of surgical sponges designated as a medical device by the FDA, with each sponge measuring 4 inches by 4 inches and packaged in precut envelopes—25 per box, with 600 boxes total as the unit of issue. The sponges are intended for use around drains, catheters, intravenous infusions, hyperalimentation, and dialysis procedures. Delivery must be completed within five days of order placement under FOB Destination terms, with inspection and acceptance occurring at the point of delivery. The packaging and marking must strictly adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and preservation and packing must comply with MIL-STD-2073-1E. All materials must be marked in accordance with DLA’s MMS No. 1, and commercial packaging standards must be followed without reliance on military specifications except where explicitly required. The contract is a total small business set-aside under NAICS code 339113, with automated award likely based on Lowest Price Technically Acceptable methodology. Pricing is not specified in the document, rendering the total contract value indeterminate. Contractors must be registered in SAM, possess a Unique Entity ID, and comply with cybersecurity requirements under FAR 52.204-21 and 52.240-93 for safeguarding covered defense information. Subcontracting plans are required under FAR 52.244-6, and accelerated payments to small business subcontractors are mandated. Invoicing must be submitted via Wide Area WorkFlow (WAWF), and all shipments must be properly labeled and documented in compliance with federal hazardous materials regulations and DLA logistics directives. The contracting office is located at DLA Troop Support in Philadelphia, PA, with Tiffany Parker listed as the primary point of contact. All responses must be submitted electronically via the DIBBS portal by the solicitation close date, and no physical submissions are permitted.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

ADAPTER, AIRWAY, CO2The contract is for the procurement of 35 packages of a single-use, disposable CO2 airway adapter suitable for both pediatric and adult use, with each package containing ten units. The item is identified by NSN 6515-01-598-4522 and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. Bidders are required to clearly state the source and part number of the product being offered and adhere to DLA packaging standards. The contract is part of a federal procurement under solicitation SPE2DS-26-T-274V, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of August 3, 2026, and delivery expected within 84 days after order. The place of performance is listed as APO, 09227-0000, and all supplies must be free of government identification if not accepted. The solicitation is classified under NAICS code 334511 for medical equipment manufacturing.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

MANIFOLD ASSEMBLY, ASPIThe contract pertains to the procurement of two units of the Manifold Assembly, Aspirator, identified by NSN 6515-01-699-5453, for use in medical acquisitions. Each unit must be delivered within 20 days of award and is governed by strict packaging and marking standards, including compliance with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Packaging must ensure protection against damage, with each unit sealed in a suitable container and shipped in commercial exterior containers that guarantee safe, low-cost delivery to Scott AFB, Illinois, via common carrier. All supplies must be properly labeled according to MMS No. 1, and copies of this standard are available through DLA Troop Support. The contract incorporates technical and quality requirements from the DLA Master List, and bidders must clearly specify the source and part number being supplied. The procurement is subject to DLA packaging requirements and the potential handling of covered defense information. The solicitation, numbered SPE2DS-26-T-275R, was issued on July 27, 2026, with responses due by August 3, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339112, with Vernon Stevenson as the primary point of contact.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

DRESSING, CHEST SEAL WOThe dressing is a 6-inch by 6-inch individual occlusive chest seal designed for rapid deployment in combat environments to seal life-threatening penetrating chest wounds. It features a super adhesive backing and is constructed from clear, durable material to ensure visibility and reliability under harsh conditions. The product is sealed in an easy-to-open protective package that allows quick access even in low-light or windy settings, ensuring soldiers can apply it effectively under battlefield stress. It does not include a needle and is intended solely as a wound-sealing device. The item has a mandatory 60-month shelf life, with no extension permitted, and no more than nine months may have elapsed from the manufacturer’s production date to the date of delivery to the government. It is identified by NSN 6510-01-532-8019 and is subject to strict defense information controls and packaging requirements. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation or award. The contract is part of a federal procurement under solicitation SPE2DS-26-T-275J, with a delivery deadline of 10 days after order placement and is managed by the Department of Defense’s Medical Supply Chain.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

SHUNT SET, CAROTID ARTEThe contract specifies the procurement of argyle carotid shunt sets, each containing four sterile, disposable polyvinyl tubes measuring six inches in length with respective inner diameters of 8, 10, 12, and 14 French sizes, all featuring a radiopaque line for visual guidance during surgical procedures. These shunts are intended for use in carotid artery plaque removal and are packaged ten sets per case, with the unit of issue being a package of ten. The item is identified by NSN 6515-01-181-0342 and the contract calls for a quantity of two packages, requiring delivery within five days of award. Technical and quality standards referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Packaging must conform to DLA requirements under RP001, and covered defense information provisions under RD003 apply. The bidder must clearly identify the source and part number being offered, and the contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance located at Fort Bragg, North Carolina. The solicitation was posted on July 27, 2026, with responses due by August 3, 2026, and point of contact is Marcos Aliaga.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE