Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical Kit Procurement and Supply

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of the DIP QUICK STAIN KIT BULK REFILL, identified by NSN 6550-01-484-2014, for use in medical and surgical environments under the Department of Defense’s Medical Supply Chain. All suppliers must be FDA-approved and adhere strictly to established medical supply standards to ensure product safety, efficacy, and consistency. The kit is intended for bulk replenishment and must meet rigorous quality controls applicable to diagnostic reagents used in field and clinical settings. This is a subcontract under the NAICS code 424210, with a response deadline of August 10, 2026, and a posted date of August 3, 2026. The place of performance is listed as APO 09227-0000, indicating delivery to overseas or military locations. The agency responsible is the Medical Supply Chain MD Surg FSF, operating under the Department of Defense. The procurement is governed by federal acquisition protocols, and vendors must comply with all regulatory and logistical requirements for distributing medical consumables to defense facilities.

General Info

Procurement of FDA-approved DIP QUICK STAIN KIT BULK REFILL for DoD medical use, delivery to APO 09227, deadline August 10, 2026

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

424210 - Drugs and Druggists' Sundries Merchant WholesalersView NAICS

Place of Performance

APO, AE, 09227-0000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of DIP QUICK STAIN KIT BULK REFILL (NSN 6550-01-484-2014), including procurement from FDA-approved vendors and compliance with medical supply standards.

Similar Contracts

Same NAICS industry code

ALBUTEROL INHALATIO

Solicitation # SPE2DP-26-T-4470

Albuterol Inhalation Aerosol is a prescription-only medication supplied as a pressurized aluminum canister containing 60 actuations, each delivering 108 micrograms of albuterol sulfate, equivalent to 90 micrograms of albuterol base, through a plastic actuator with a strap cap and built-in counter. The canister has a net weight of 8 grams and must be stored at 20° to 25°C (68° to 77°F), with allowable excursions between 15° and 30°C, following USP controlled room temperature guidelines. The inhaler must be kept with the mouthpiece down, shaken well before each use, and brought to room temperature prior to administration to ensure optimal performance. The product has a non-extendable shelf life of 18 months, and at the time of receipt by the first government activity, a minimum of 15 months of shelf life must remain. It is labeled and marked in compliance with SPE2DP-26-T-4470 and Medical Marking Standard No. 1C, and is classified as a hazardous material with flammable characteristics due to its pressurized contents. The canister must not be punctured, exposed to temperatures above 120°F, or disposed of in fire or incinerators. A current Material Safety Data Sheet (MSDS) is required and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL along with a completed cover sheet. Packaging must conform to 49 CFR and ICAO regulations for hazardous materials. The NSN is 6505-01-649-7928, with a quantity of 15 units ordered under Purchase Request 7017715897, with delivery required within 20 days of award. The solicitation is governed by DLA technical and quality requirements referenced in the DLA Master List, and buyers must confirm regulatory compliance through an EBS referral to the product specialist, providing manufacturer and bidder details. The item is regulated by the FDA and falls under Defense Information potentially subject to additional reporting.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 10 hours ago

DEADLINE

LIDOCAINE AND PRILOCAI

Solicitation # SPE2DP-26-T-4475

Lidocaine and prilocaine periodontal gel, marketed as ORAQIX at a 2.5%/2.5% concentration, is a microemulsion dental anesthetic supplied in individual blister-packed cartridges, each containing 1.7 grams of gel, with 20 cartridges per carton. Each cartridge comes with a single-use sterile blunt-tipped applicator and must be stored at controlled room temperature between 20°C and 25°C. The product is regulated by the FDA and classified as a prescription-only device with a non-extendable shelf life of 36 months, requiring labeling in compliance with MMS No. 1. Packaging must conform to DLA specifications, including MIL-STD-129 marking, and all technical and quality requirements from the DLA Master List take precedence over commercial standards. The item is identified by NSN 6505-01-656-9640 and manufacturer part number NDC66312-0110-20 from Dentsply Sirona Inc. The contract, issued under solicitation SPE2DP-26-T-4475, requires delivery of three packages to Seymour Johnson Air Force Base in North Carolina within 20 days of order placement, with FOB destination terms and zero tolerance for quantity variance. Shipping must be conducted via traceable means, explicitly prohibiting parcel post. The delivery is scheduled for August 5, 2026, and the contract includes federal acquisition compliance requirements, including referral protocols for FDA-regulated items through EBS and adherence to covered defense information protocols. The purchasing request number is 7017708438, and all packaging and unit of issue must align with DLA’s authorized standards, with point of contact Lawrence Garnett available for coordination.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 10 hours ago

DEADLINE

SUNSCREEN PREPARATION

Solicitation # SPE2DP-26-T-4479

The contract is for the procurement of a topical sunscreen preparation containing 4.5% titanium dioxide and 4% zinc oxide with an SPF of 50, designed for outdoor use and meeting stringent military specifications. The product is sweat and water-resistant for 80 minutes, hypoallergenic, oil-free, PABA-free, and biodegradable. Each unit of issue consists of a package containing 24 tubes of 3 ounces each, with a total shelf life of 24 months and a minimum of 21 months remaining at the time of government receipt. Storage must occur between 15°C and 30°C in a cool, dry environment. The item is regulated by the FDA and classified as a Type I (Code M) item with a non-extendable shelf life. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must ensure protection during transit. All packaging and labeling must adhere to DLA’s Master List of Technical and Quality Requirements, which take precedence over commercial standards like ASTM D3951. The product must be shipped in commercial exterior containers suitable for safe delivery by common carrier via the fastest traceable means, with no use of parcel post permitted. Delivery is FOB destination with a 20-day lead time, and the sole delivery point is the USS ZUMWALT DDG 1000 at FPO AP 96693. The shipment must be palletized in accordance with DLA packaging requirements and labeled with the NSN 6505-01-657-9247 and contract line item number 7017729391. The order quantity is one package, and no variance in quantity is permitted. The procurement is issued under solicitation SPE2DP-26-T-4479, with a response deadline of August 10, 2026, and a required delivery date of August 6, 2026. Transportation and shipping protocols are governed by DLAD procedural notes C19 and C20, and all vendors must use the Vendor Shipping Module for tracking. The contracting office is part of the Department of Defense’s Medical Supply Chain, and any bid must be referred to the product specialist in EBS with manufacturer and item details for confirmation prior to award.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 10 hours ago

DEADLINE

Pharmacy Services for 340B Purchasing Program

Solicitation # RFP 26-19772-KM

The City of Lubbock is seeking qualified vendors to provide pharmacy services under its 340B Purchasing Program through Solicitation RFP026-19772-KM, which was posted on August 4, 2026, with proposals due by August 27, 2026. The contract aims to secure comprehensive pharmacy support that aligns with federal 340B eligibility requirements, ensuring cost-effective access to medications for eligible patients served by the city’s health programs. Vendors must demonstrate experience in 340B program compliance, drug procurement, inventory management, and reporting, with an emphasis on efficiency, transparency, and adherence to regulatory standards. All proposals must be submitted through the Texas SmartBuy portal, and inquiries should be directed to Kiara Morgan, the primary point of contact, or Marta Alvarez, Director of Purchasing, both reachable via email or phone at the listed numbers. The contract will be performed within Lubbock, Texas, and vendors are expected to work closely with the city’s healthcare providers to ensure seamless integration of pharmacy services into existing systems. The solicitation does not specify a set-aside type, making it open to all eligible vendors, and responses must fully address all technical, financial, and compliance requirements outlined in the proposal guidelines.

CITY OF LUBBOCK

POSTED

about 12 hours ago

DEADLINE

Supply of Eco-Friendly Janitorial Consumables

Mrpbs Minneapolis Mn

POSTED

about 15 hours ago

DEADLINE

Supplier of Medical Devices and Components (NSN-Based)This contract seeks suppliers to provide medical devices and components identified by National Stock Numbers for procurement by the Department of Defense. All items must meet strict technical specifications, packaging standards, labeling requirements, and shelf-life criteria to ensure operational readiness and compliance with military medical logistics protocols. The contract is structured as a subcontract under NAICS code 424210, focused on medical equipment and supplies distribution, and performance is designated to occur at APO 09227-0000, indicating delivery to U.S. military overseas locations. Responses are due by August 10, 2026, with the solicitation posted on August 3, 2026, through the DIBBS system, and no set-aside provisions are specified, meaning all eligible suppliers may compete.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Small Business and Socioeconomic-Compliant SubcontractingThis contract opportunity is designed to support small, veteran-owned, HUBZone, women-owned, and service-disabled veteran-owned businesses by enabling them to serve as subcontractors on a larger procurement effort managed by the Defense Logistics Agency under the Department of Defense. The solicitation is tied to the NAICS code 424210, which corresponds to pharmaceutical and botanical product merchant wholesalers, indicating the primary scope of subcontracted goods or services involves the distribution of medical and pharmaceutical supplies. The initiative aims to fulfill federal socioeconomic goals by prioritizing participation from designated small business categories, ensuring equitable access to government contracting opportunities without a formal set-aside designation. Performance is expected to support defense logistics operations nationwide, with no specific location designated for performance. The contract was posted in August 2026 and is linked to an existing prime award, allowing qualified small businesses to align their capabilities with the prime contractor’s needs to meet diversity and inclusion targets within the defense supply chain.

Defense Logistics Agency

POSTED

DEADLINE

SUNSCREEN PREPARATION

Solicitation # SPE2DP-26-T-4340

The contract specifies the procurement of sunscreen preparation with an SPF of 50, containing 4.5% titanium dioxide and 4% zinc oxide, designed for topical over-the-counter use. It is sweat and water-resistant for 80 minutes, hypoallergenic, oil-free, PABA-free, biodegradable, and intended for outdoor use. The unit of issue is a package containing 24 three-ounce tubes, with a total shelf life of 24 months; a minimum of 21 months of remaining shelf life is required at time of delivery. Storage must be maintained between 15°C and 30°C (59°F to 86°F) in a cool, dry location. The item is regulated by the FDA and requires pre-award referral for product specialist confirmation. Packaging must comply with DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129. Palletization must follow RP001 requirements, and all packaging must be commercially sealed to prevent damage. Hazardous material handling, as defined by FED-STD-313, requires compliance with TQ Requirement IP025, while non-hazardous materials must meet ASTM D3951. Marking must include U/I and QUP as specified, and shipments must avoid parcel post, utilizing only traceable transportation methods. Deliveries are FOB destination with zero variance tolerance and inspection and acceptance occurring at the delivery point. Three distinct delivery locations are specified including military units in Massachusetts, North Carolina, and a ship FPO address, with delivery required within five days of award. The solicitation number is SPE2DP-26-T-4340, and responses are due by August 3, 2026. The contract includes compliance with a wide array of FAR and DFARS clauses covering electronic invoicing through WAWF, cybersecurity safeguards, prohibited substances like hexavalent chromium and covered defense telecommunications equipment, export controls, trafficking in persons, employment eligibility verification, sustainable products, and whistleblower protections. Offerors must represent their size status and socioeconomic certifications through SAM and disclose any use of covered telecommunications equipment. No pricing information is provided within the solicitation, and the contract type is not explicitly defined, though terms suggest a fixed-price arrangement under simplified acquisition procedures.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Notice of Intent to Award - Pharmaceutical medical/surgical products

Solicitation # IHS1523704

The Navajo Area Indian Health Service, through the Chinle Comprehensive Health Care Facility in Chinle, Arizona, intends to award a sole-source contract to McKesson Corporation for the supply of pharmaceutical medical and surgical products. The contract will have a base performance period of one year beginning on the date of award, with no further awards anticipated unless operational needs change. The acquisition is classified under NAICS code 325412 for Pharmaceutical Preparation Manufacturing, with a small business size standard of 1,300 employees, though no set-aside is being applied. The government has determined that current conditions justify a single-award approach and is not seeking competitive bids at this time, but is inviting other potential suppliers to submit capability statements, price lists, and catalogs via email by August 10, 2026, at 5 p.m. MST, for future consideration. Responses will not constitute formal bids and will be used solely to evaluate the potential for future competitions; no proprietary, classified, or confidential information should be included. The government retains the right to use any non-proprietary technical information in subsequent solicitations, and any future competitive procurement will be publicly announced via Federal Business Opportunities. Inquiry and submission must be directed to Danelle Attson at the designated email and phone number, with the contracting office located in Rockville, Maryland, and performance to occur in Arizona.

Indian Health Service

POSTED

DEADLINE

Medical Product Distribution and Delivery to DestinationThe contract involves the logistics and delivery of boxed nasopharyngeal airways to a designated destination in accordance with Department of Defense standards, specifically requiring full compliance with DLA inspection and acceptance protocols. Execution of this subcontract is tied to the NAICS code 424210, indicating a focus on medical and surgical equipment distribution. The place of performance is listed as APO with ZIP code 96264-2022, signifying that delivery must be made to a military postal address, likely supporting overseas operations. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, under the Medical Supply Chain MD SURG FSF organization within the Department of Defense. All deliveries must meet stringent quality and documentation requirements to ensure readiness and safety for use in medical environments. The nature of the product demands precise handling, packaging, and traceability throughout the supply chain, with inspections conducted by DLA authorities prior to acceptance. Although the point of contact and specific office details are not provided, the contract is accessible via the DIBBS platform, indicating it is managed through official DoD procurement channels. The subcontract aims to ensure timely and compliant supply of critical medical devices to authorized military locations without delay or deviation from federal standards.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Pharmaceutical Supply Delivery – Promethazine Hydrochloride (NSN: 6505000654214)The contract obligates the supply and delivery of 1,000 kilograms of Promethazine Hydrochloride with National Stock Number 6505000654214 to the USS ZUMWALT DDG 1000 at a Fleet Post Office address. All shipments must adhere to strict DLA logistics protocols, ensuring full traceability from origin to final destination, with delivery terms specified as FOB destination. The product is classified under NAICS code 424210, indicating distribution within the pharmaceutical and cosmetic wholesale industry, and the contract is structured as a subcontract under the Defense Logistics Agency, a component of the Department of Defense. Compliance with all federal medical supply standards, handling requirements, and military receipt verification procedures is mandatory to fulfill the obligation.

Defense Logistics Agency

POSTED

DEADLINE

Medical Supply Packaging and MarkingThe contract pertains to the packaging and marking of medical supplies in strict compliance with Department of Defense standards, specifically DLA and MIL-STD-129 requirements, ensuring all items are properly labeled for storage and destination. This includes accurate application of barcodes, unit identification codes, and other mandated markings to support logistics traceability and inventory management across military supply chains. The work must adhere to federal guidelines for durability, readability, and placement of labels to meet operational readiness standards. This is a subcontract under the NAICS code 424210, classified under the Medical Supply Chain MD Surg FSF organization within the Department of Defense. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The place of performance details are not specified, suggesting the work may be performed at multiple locations or determined post-award. Interested parties must access the full solicitation through the DIBBS portal to understand technical specifications, delivery timelines, and compliance obligations detailed in the official documents.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

APPLICATOR, DISPOSABLE

Solicitation # SPE2DS-26-T-305Y

The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).

Surgical Appliance and Supplies Manufacturing

POSTED

about 10 hours ago

DEADLINE

FLASHLIGHT, EYE EXAM

Solicitation # SPE2DS-26-T-306D

The contract is for the procurement of three disposable, self-contained eye examination flashlights with a blue spot beam, identified by NSN 6515-00-185-9482 and purchase request 7017744837, under solicitation SPE2DS-26-T-306D. The item is classified as a medical device regulated by the FDA, requiring verification by the contracting official through EBS referral with detailed manufacturer and bidder information. Each unit must be packaged in a sealed commercial container that protects against damage and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Exterior shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination point. The device must be sourced with a specified manufacturer part number and supplier, and bidders must clearly state their source and part number in their submission. Delivery is required within 55 days of contract award, with a firm delivery date of August 4, 2026, and delivery terms are FOB destination. The units must be marked in accordance with Medical Marking Standard No. 1, and packaging must adhere to commercial standards as specified in the procurement document, not MIL-STD-2073-1E despite earlier references. The shipment is destined for APO AP 96260-5479 for U.S. medical material center purposes, with a secondary freight address at Camp Carroll, Korea. The unit of issue is each (EA), quantity is fixed at three with zero variance allowed, and the unit price is $3.00 for a total contract value of $9.00. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and delivery procedures are strictly governed by DLA’s medical logistics directives.

Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-306E

The contract specifies the procurement of two aluminum bow supports, each 12 inches nominal in size, designed for use with finger traps and identified by NSN 6515-01-490-5116. These items are intended for medical applications and must comply with all associated technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers. Packaging and marking must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The unit of issue is each, and bidders are required to clearly indicate the source and part number being offered. All provisions are governed by the Federal Acquisition Regulation and the DLA Packaging Requirements, and the item must be delivered within 84 days of award. The solicitation, issued under SPE2DS-26-T-306E, was posted on August 4, 2026, with responses due by August 10, 2026, under NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain.

Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

CABLE, INVASIVE BLOOD P

Solicitation # SPE2DS-26-T-306F

The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

FORCEPS, INTESTINAL

Solicitation # SPE2DS-26-T-306S

The item is a Meeker intestinal forceps with an overall nominal length of 10.75 inches and a right-angle design, intended for surgical use in intestinal procedures. It is identified by NSN 6515-01-499-5074 and sold in units of one each, with a single unit ordered under purchase request 7017314307. Delivery is required within 20 days after order award. The solicitation, numbered SPE2DS-26-T-306S, was posted on August 4, 2026, with responses due by August 10, 2026, and falls under NAICS code 339112 for surgical and medical instrument manufacturing. The contract is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance to occur in Hampton, Virginia. The technical specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must comply with the revision in effect on the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. Additionally, the contract is subject to Covered Defense Information requirements, indicating that the item may involve sensitive or controlled data under federal procurement protocols.

Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

SKIN CLOSURE, ADHESI

Solicitation # SPE2DS-26-T-306Y

The contract specifies the procurement of sterile adhesive skin closures in the form of Steri-Strip wound closure strips measuring 0.25 inches by 3 inches, with a total quantity of 150 strips per package. The strips are supplied in fifty sealed plastic envelopes, each containing three strips, and are available in two alternate backings: polypropylene film and nonwoven nylon fabric, both porous. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest carrier rate to the specified point of delivery in Hurlburt Field, Florida. The item is identified by NSN 6510-00-913-5874 and is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month expiration. All technical and quality requirements are governed by the DLA Master List, and bidders must provide the source and part number being offered. The solicitation, issued under SPE2DS-26-T-306Y, requires bids to be submitted by August 10, 2026, with delivery expected within 20 days of award.

Surgical Appliance and Supplies Manufacturing

POSTED

about 10 hours ago

DEADLINE

SANITIZER, HAND

Solicitation # SPE2DS-26-T-305X

The contract is for a hand sanitizer classified as a waterless cleanser with an alcohol base containing 70% ethyl alcohol, unscented, and packaged in 4 fluid ounce bottles. Each unit of issue is a package containing 24 bottles, and the total order consists of two such packages. The item must have a mandatory 36-month shelf life that is non-extendable, and no more than five months may have passed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA packaging requirements, and the product must meet all technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from any non-accepted supplies. The item is identified by NSN 8520-01-346-9200, with a delivery deadline of 20 days after contract award. The solicitation was issued under SPE2DS-26-T-305X, with a response deadline of August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the office in San Antonio, Texas. Primary point of contact is Mary-Kathryn Donahue, reachable via email and phone provided.

Soap and Other Detergent Manufacturing

POSTED

about 10 hours ago

DEADLINE

MEDICAL SUPPLY SET, OBS

Solicitation # SPE2DS-26-T-306G

The contract specifies the procurement of three Medical Supply Sets for Obstetrical Field Use, each containing a complete sterile kit designed for emergency obstetrical care. Each set includes sterile exam gloves, an obstetrical napkin, antiseptic towelettes, umbilical cord clamps, a disposable scalpel, a plastic apron, a 17x24 inch plastic-lined underpad, two 13x19 inch disposable towels, a 40x48 inch drape sheet, a plastic placenta bag, two plastic twist ties, a 2-ounce bulb syringe, four sterile 4x4 inch gauze sponges, a sterile foil baby bunting, and a newborn diaper, all packed in an OB box. The items are regulated by the FDA and must be supplied with full source and part number disclosure. Packaging and labeling must comply strictly with DLA’s Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere to DLA packaging requirements RP001. Units must be individually sealed and shipped in commercial outer containers suitable for safe transit by common carrier under the lowest cost terms, with no parcel post permitted. Delivery is FOB destination with zero tolerance for quantity variance and a required delivery date of August 6, 2026. Two sets are destined for USS Ronald Reagan, and one for USS Zumwalt, with shipments required to be made via traceable means using DLA’s VSM system and RDD 777 protocol. All technical and quality requirements from the DLA Master List take precedence over commercial standards like ASTM D3951, and suppliers must confirm FDA compliance through EBS referral prior to award.

Ground or Treated Mineral and Earth Manufacturing

POSTED

about 10 hours ago

DEADLINE

DRY FIRE MAGAZINE, P

Solicitation # SPE2DS-26-T-306A

The dry fire magazine is a non-functional training aid designed exclusively for resetting the trigger assembly of a 9mm pistol during marksmanship drills. It has precise dimensional requirements: length between 5.05 and 5.07 inches, height between 1.56 and 1.58 inches, width between 1.19 and 1.21 inches, and a cubic measure of 9.53 cubic inches. It is incapable of holding any ammunition and serves solely as a mechanical training device to simulate magazine insertion and trigger manipulation without live rounds. The unit of issue is each, and the item is identified by NSN 6910-01-708-4254 with a procurement quantity of 20 units. This acquisition is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation or award date. Removal of government identification from non-accepted supplies is mandated under RQ011. The contract solicitation, numbered SPE2DS-26-T-306A, was posted on August 4, 2026, with responses due by August 10, 2026. The procurement falls under NAICS code 336413 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Delivery is required within 20 days of award, and performance is specified to occur at FPO, ZIP 96673. The primary point of contact for inquiries is Tiffany Parker, reachable via email and phone provided.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

TUBING, TRANSDUCER

Solicitation # SPE2DS-26-T-306K

The item is a disposable A-line transducer tubing, 60 inches in length, designed for use with A-line transducers and equipped with a squeeze flush device. It is packaged in units of 20 each, identified by NSN 6515-01-500-7556, and must meet a strict shelf-life requirement of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. The product is subject to DLA packaging standards and incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Removal of government identification from non-accepted supplies is prohibited. The solicitation, issued under SPE2DS-26-T-306K, is for a single packaging unit with a delivery deadline of 20 days after award, and performance is required at Fort Bliss, Texas. The contract is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339112, with Vernon Stevenson listed as the primary point of contact.

Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

ELECTRODE, ELECTROCARDI

Solicitation # SPE2DS-26-T-306U

The contract specifies the procurement of eight units of electrocardiograph electrodes designed exclusively for use with the Cardiac Science Powerheart G5 automatic and semi-automatic AEDs. Each unit must be properly sealed in a protective container to prevent damage and packaged in commercial shipping containers suitable for safe delivery via common carriers at the lowest possible rate to the designated delivery point in San Diego, California. The materials must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all packaging and labeling requirements are governed by DLA Packaging Requirements for Procurement and other technical and quality standards referenced in the DLA Master List. Each unit must have a minimum shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of government delivery. Labels on each unit must include the NSN 6515-01-652-8523, manufacturer name and CAGE code, manufacturer date, expiration or retest date, and the contract number or lot number. All supplies are subject to removal of government identification if not accepted, and the solicitation is governed by the revision of the DLA Master List effective on the solicitation issue date. The contract, awarded under solicitation SPE2DS-26-T-306U, has a response deadline of August 10, 2026, and requires delivery within 20 days after order placement.

Surgical Appliance and Supplies Manufacturing

POSTED

about 10 hours ago

DEADLINE

CATHETERIZATION KIT, UR

Solicitation # SPE2DS-26-T-305W

The contract specifies the procurement of a urethral catheterization kit, designated as a 16FR Foley catheter with a 2000 mL anti-reflux valve bag, packaged in units of 10 per pack (PG). Each kit includes sterile drapes, underpads, specimen containers, five prep balls, povidone-iodine solution, gloves, prefilled syringes with 10 CC sterile water and lubricant, and forceps. The product must have a 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Packaging must comply with DLA Packaging Requirements, Medical Marking Standard No. 1, and ASTM D3951, with labeling requirements including NSN, manufacturer and CAGE code, manufacture and expiration dates, contract and lot numbers. The item is regulated by the FDA and requires referral via EBS for confirmation. Two delivery locations are specified: USS ZUMWALT DDG 1000 in FPO AP and Fort Campbell, KY, with shipments prohibited from using parcel post and requiring traceable means. Delivery is due within 20 days from order with zero quantity variance permitted. The unit of issue is PG, and the NSN is 6515016152124. Manufacturer part numbers 899616 from Cardinal Health 200, LLC and C. R. Bard, Inc. are accepted. Palletization and marking must adhere strictly to DLA standards, and all packaging documentation must supersede any conflicting requirements.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE