Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical Lighting Equipment Supply – Surgical Lights

Active

Federal

Response Deadline08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of thirteen ceiling-mounted surgical lights, specifically the FMI-301CLED model, to be delivered to U.S. Navy vessels. All units must meet full compliance with both FDA regulations and applicable military standards, ensuring functionality, safety, and reliability in high-stakes medical environments aboard naval ships. The equipment is required to support surgical operations under the demanding conditions typical of military medical facilities, with performance and durability being critical factors. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is classified as a subcontract under NAICS code 335129, which pertains to other lighting equipment manufacturing. The performing location is designated as FPO, ZIP 09554, indicating delivery to a military postal address, typically used for overseas or ship-based operations. The contracting agency is the Medical Supply Chain FSH under the Department of Defense, and the procurement is managed through the DIBBS platform, with the official reference link provided for bidder access.

General Info

Thirteen FMI-301CLED surgical lights for U.S. Navy ships, meeting FDA and military standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

335129 - Other Lighting Equipment ManufacturingView NAICS

Place of Performance

FPO, AE, 09554, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 05:00:00 PM UTCin about 11 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 13 ceiling-mounted surgical lights (FMI-301CLED model) compliant with FDA and military standards for delivery to U.S. Navy vessels.

Similar Contracts

Same NAICS industry code

Supply and Installation of Retroreflective Pavement Markers

STATE OF CALIFORNIA DEPARTMENT OF TRANSPORTATION

POSTED

DEADLINE

DOT-Compliant Lighting and Safety SystemsThe contract seeks the supply of DOT-approved lighting, reflectors, and warning systems specifically designed for the safe road transport of a grain drill, ensuring compliance with federal transportation safety standards. The requirement is issued as a subcontract under a Small Business Set Aside designation, reserved exclusively for small businesses, with the NAICS code 335129 indicating it falls under Miscellaneous Electrical Equipment and Component Manufacturing. The solicitation was posted on August 3, 2026, and responses are due by August 7, 2026, at 9:00 PM Eastern Time. Performance of the contract is required to be carried out in Adams, Oregon, with a zip code of 97810. The contracting entity is the USDA ARS AFM APD under the Department of Agriculture, though no specific point of contact or additional office details are provided. All equipment must meet current DOT regulatory requirements for visibility, safety, and durability during transit.

USDA Ars Afm Apd

POSTED

DEADLINE

Emergency Lighting Strip SupplyThe contract is for the supply of ten emergency lighting strips with part number S1S1S1, designed for low-voltage, long-duration operation to ensure cabin safety in marine or aerospace environments. These lighting units are critical for maintaining visibility and safety during power outages or emergency scenarios, meeting stringent operational requirements for durability and reliability under extreme conditions. The contract is classified as a subcontract under NAICS code 335129, indicating it falls within the broader category of electrical lighting equipment manufacturing. It was posted on July 31, 2026, with a response deadline of August 12, 2026, at 5:00 PM, giving potential suppliers a limited window to submit proposals. The agency responsible is the Navsup Fleet Logistics Center Puget Sound, operating under the Department of Defense, which underscores the sensitive and mission-critical nature of the equipment. Although specific location details for performance or delivery are not provided, the intent is for the lighting strips to support operations in demanding environments where standard lighting systems would be insufficient. All submissions must comply with technical and performance specifications tied to the part number and intended use without room for substitution or deviation.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Integrated Tool Lighting SystemThe contract seeks the supply and integration of a ruggedized low-light lighting system designed specifically for use with breaching tools in dark or low-visibility environments. The system must be durable enough to withstand harsh tactical conditions while providing reliable illumination that enhances operator safety and effectiveness during critical operations. It is intended for deployment in conjunction with existing breaching equipment, requiring seamless integration to ensure functionality without compromising tool performance or ergonomics. This subcontract is being issued by the Florida Police Department with a response deadline of August 11, 2026. The NAICS code 335129 indicates the focus on other electrical equipment and component manufacturing, suggesting the solution must be engineered and produced to industry-specific standards. The place of performance and point of contact details are not provided, and no set-aside type is specified, meaning eligible vendors of all sizes may respond. The project is posted on the Cape Coral, Florida public procurement portal, and all submissions must meet technical and procedural requirements outlined in the solicitation by the stated deadline.

Police Department

POSTED

DEADLINE

LED 4FT Tubular Bulb Supply (SYLVANIA or Equivalent)Nashville Electric Service is seeking suppliers to provide 1,225 units of LED 4FT tubular bulbs that meet or exceed the specifications of the SYLVANIA LED12T8L48FGPDIM8SC12BF model or an approved equivalent. The contract is structured as a subcontract with no installation, maintenance, or additional services required—the sole obligation is the delivery of compliant lighting units. The solicitation was posted on July 30, 2026, and responses must be submitted by 7:00 PM ET on August 5, 2026. The North American Industry Classification System code for this procurement is 335129, which pertains to other lighting equipment manufacturing. The place of performance is Nashville, Tennessee, and all bids must be submitted through the vendor portal at the provided link. The contract does not specify a set-aside classification, and no point of contact information is listed.

Nashville Electric Service

POSTED

DEADLINE

in about 13 hours

Medical Lighting Equipment Supply – Examination LightsThe contract requires the supply of three ceiling-mounted examination lights model FMI-301CLED, specifically designed for use on U.S. Navy vessels and must meet stringent FDA regulatory requirements as well as military packaging standards to ensure durability and compliance in operational environments. The equipment is intended for medical use aboard naval ships, necessitating precise engineering and adherence to federal specifications for light output, safety, and installation compatibility. Delivery must be coordinated to the designated military postal address FPO with ZIP code 09554, reflecting the remote and maritime nature of the end use location. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, indicating a tight turnaround for qualified suppliers to submit proposals. The contract is classified as a subcontract under NAICS code 335129, which pertains to other lighting equipment manufacturing, and is administered by the Department of Defense through the Medical Supply Chain FSH office. Although no specific point of contact or set-aside provisions are detailed, the requirement underscores a critical need for reliable, compliant medical lighting in military healthcare settings, where malfunction or non-compliance could impact patient care during missions.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

in about 11 hours

Supply of Portable Fluorescent LampsThe contract entails the supply of portable fluorescent lamps that contain mercury, with strict adherence to federal environmental regulations and military packaging standards to ensure safe handling, transport, and disposal. These lamps are required to meet specific technical and compliance criteria established by the Department of Defense to safeguard both personnel and the environment throughout their lifecycle. The performance location is designated as Groton, Connecticut, with a zip code of 06340-4905, indicating the primary operational area where the lamps will be delivered and utilized. This subcontract, issued under the NAICS code 335129 for other lighting equipment manufacturing, is managed by the Defense Logistics Agency and is open for response until August 10, 2026. The posting date of July 28, 2026, provides suppliers with a limited window to prepare and submit proposals that align with the stringent environmental and military packaging requirements. While no set-aside information is specified, the contract is part of a broader Defense Department initiative to procure mission-critical lighting equipment while maintaining regulatory compliance and logistical integrity.

Defense Logistics Agency

POSTED

DEADLINE

Energy-Efficient Electrical Products SupplyThe contract titled Energy-Efficient Electrical Products Supply is a subcontract awarded by the Government of Jamaica’s Post and Telecommunications Department to procure energy-saving electrical products including LED lighting, low-consumption appliances, and efficient motors. The procurement aligns with the department’s green procurement objectives aimed at reducing energy consumption and promoting sustainable practices. The contract falls under the NAICS code 335129, which categorizes it within the manufacture of other electrical equipment and components. It was posted on July 28, 2026, and is intended for delivery across locations under the jurisdiction of the agency, with no specific city or state defined for performance. The contract opportunity is accessible via the Government of Jamaica’s electronic procurement portal for bidders and subcontractors interested in supplying compliant energy-efficient technologies.

Post and Telecommunications Department

POSTED

DEADLINE

Electrical or Signaling Equipment SupplyThe contract seeks the supply of electrical components or traffic signaling equipment that must fully comply with Arizona Department of Transportation and Maricopa Association of Governments standards. This subcontract is open for bidding with a response deadline of August 13, 2026, and was posted on July 28, 2026. The NAICS code 335129 categorizes the procurement under other electrical equipment and component manufacturing, indicating the specialized nature of the required goods. The work is associated with the Public Works agency in Arizona, and the place of performance is within the state, though specific location details are not provided. The contract does not specify a set-aside type or point of contact, and interested parties can access further information through the provided online portal link.

POSTED

DEADLINE

LED Work Lights and Backup Alarm InstallationThe contract is for the supply and factory installation of OEM-compliant LED work lights and backup alarms on diesel utility vehicles intended for off-road operational use, ensuring compliance with original equipment manufacturer standards. The work must be performed at the factory level, integrating the lighting and alarm systems directly during vehicle production to meet rigorous performance and safety requirements for demanding field environments. The solicitation is designated as a Small Business Set Aside under the NAICS code 335129, exclusively available to small businesses, with responses due by August 12, 2026, and the contract issued through the Department of Veterans Affairs through Network Contract Office 19, with performance required in Cheyenne, Wyoming, under the 82001 zip code.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Exterior Lighting Fixture SupplyThe contract involves the supply of LED luminaires, poles, and mounting hardware compliant with specified technical requirements for a campus-wide exterior lighting upgrade. All delivered components must meet defined performance, durability, and energy efficiency standards to ensure uniformity and long-term reliability across the installation site. The work is classified as a subcontract under NAICS code 335129, which pertains to other照明设备制造, indicating the focus is on manufacturing and supply rather than installation. The solicitation was posted on July 28, 2026, with a hard deadline for responses set for August 5, 2026, at 5:30 PM. The place of performance is categorized as “Other,” suggesting the equipment will be distributed to multiple locations under the jurisdiction of the Kentucky Department for Facilities and Support, though no specific campus or address is listed. The contract does not indicate a set-aside status or point of contact information. Proposals must be submitted via the provided online portal.

Dept for Facilities and Suppor

POSTED

DEADLINE

in about 11 hours

Portable Electric Light Tower SupplyThe contract calls for the supply of five portable electric floodlight towers that must fully comply with military specifications and federal shipping standards, ensuring durability, performance, and transportability under demanding operational conditions. These units are intended for defense-related applications and must meet stringent requirements for reliability, power efficiency, and environmental resilience. The solicitation is issued under the NAICS code 335129, indicating classification within other electric lighting equipment manufacturing, and is structured as a subcontract within the broader framework of Department of Defense procurement efforts overseen by the Defense Logistics Agency. The opportunity is open for response until August 7, 2026, with the request for quote initially posted on July 27, 2026. There is no set-aside designation specified, meaning all eligible contractors may compete without restrictions based on business size or type. Performance of the contract will occur without a defined geographic location indicated, suggesting the deliverables may be distributed to various military sites as needed. Interested parties must access the official solicitation through the DIBBS portal using the provided link to obtain complete technical specifications, submission guidelines, and contractual terms.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

SCOOP, LABORATORY

Solicitation # SPE2DH-26-T-5776

The contract specifies the procurement of sterile, disposable, individually sealed laboratory scoops manufactured from polystyrene plastic, intended for retrieving samples from larger sources. The product is white in color and supplied in boxes of ten units each, with a total order quantity of three boxes. The items are classified under NSN 6640-01-722-5866 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the type of acquisition. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Delivery is required within twenty days after issuance, and performance will occur at APO 96278-2060. The solicitation, issued under SPE2DH-26-T-5776, was posted on August 4, 2026, with responses due by August 11, 2026. The contracting authority is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.

All Other Industrial Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

PANEL, MODULAR, HANGING

Solicitation # SPE2DH-26-T-5768

The contract is for a single unit of a modular hanging trauma panel designated by NSN 6530-01-515-7651, intended for rapid deployment in combat trauma care during CASEVAC operations. Constructed of black Cordura nylon, the panel is MOLLE compatible and designed to integrate seamlessly with military aircraft, ground vehicles, and fixed or temporary facilities. It features a comprehensive internal layout including four full-width storage pockets, one half-panel bellos pocket, and a total of ten modular pockets—six small, two medium, one long, and one flat—each labeled with removable low-light visibility markings to ensure quick identification under low-visibility conditions. The panel itself is marked internally and externally with low-light readable "TRAUMA" identifiers and supports immediate access to essential medical supplies, enabling effective "tail gate" medical response anywhere on the battlefield. The procurement falls under DLA packaging requirements and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5768, issued on August 4, 2026, with bids due by August 11, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly identify the source and part number of the supplied item, and the purchase request number is 7017716143, with the unit of issue being each.

Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE2DH-26-T-5772

The study card is a paper-based item measuring 5 inches by 4 inches, intended for use with the Explosive Ordnance Disposal Tool Kit identified by NSN 1385-01-565-1626. It is supplied as a single unit and is specifically tied to the part number 6910-01-612-6510 with a required quantity of one. The item is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which must be accessed online, and compliance is governed by the revision of the master document in effect at the time of solicitation or award depending on the acquisition size. The contract includes a requirement for the removal of government identification from non-accepted supplies. This solicitation, identified by SPE2DH-26-T-5772, was posted on August 4, 2026, with a response deadline of August 11, 2026. The purchase request number is 7017726970, and delivery is expected within 20 days after order placement. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with performance required at Camp Lejeune, North Carolina, 28542. All inquiries should be directed to Tina Vu at the provided contact information. The NAICS code for this procurement is 453998, and the full solicitation details are accessible through the DIBBS portal.

All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 13 hours ago

DEADLINE

COMPARATOR, COLOR

Solicitation # SPE2DH-26-T-5767

The comparator is a color-matching device designed for use with COLILERT QUANTI-TRAY systems to distinguish between borderline positive and negative results through visual comparison of yellow fluorescence thresholds. It is a 51-well tray filled with a proprietary borderline yellow and fluorescing medium to ensure accurate interpretation of test outcomes. The item is identified by NSN 6630-01-506-2252 and is being procured under solicitation SPE2DH-26-T-5767 for a single unit, with delivery required within 20 days of award. The product is subject to strict shelf-life requirements, mandating a non-extendable 12-month lifespan from the date of manufacture, with no more than one month elapsed between manufacturing and government delivery. Labeling must adhere to the latest version of Medical Marking Standard No. 1, including clear indications of manufacture date, expiration date, and contract or lot number, replacing all prior references to MIL-STD-129. Packaging must comply with commercial standards, protect contents from damage, and ensure safe, cost-effective transport to Dover AFB, with all markings and packaging conforming to DLA’s specified medical packaging requirements. The contract incorporates technical and quality requirements from the DLA Master List, includes provisions for handling covered defense information, and follows DLA packaging and removal guidelines for non-accepted supplies.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 13 hours ago

DEADLINE

MOUTH BARRIER, MANIKIN,

Solicitation # SPE2DH-26-T-5774

The contract solicits a single package of fifty disposable adult-sized mouth barrier and lung bag combinations designed exclusively for CPR training purposes, compatible with the Prestan adult CPR training manikin. The item is identified by NSN 6910-01-708-2080 and must comply with DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit of issue is a package containing fifty units, with a total order quantity of five packages requested to be delivered within five days of award. The procurement is governed under the federal solicitation SPE2DH-26-T-5774, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 11, 2026, and a posted date of August 4, 2026. Delivery must be made to an FPO address with ZIP 96693, and all supplies must meet the requirement for removal of government identification if not accepted. Primary point of contact is Tina Vu, reachable via email and phone provided.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE2DH-26-T-5777

LITMUS PAPER, ACS, 30’S, identified by NSN 6640-01-485-6075, is procured under solicitation SPE2DH-26-T-5777 with a requirement for one package containing thirty individual units, each individually sealed in foil packets with a printed color chart for pH indication. All packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is protected from damage and that exterior shipping containers are suitable for safe transport at the lowest cost to the designated delivery point in APO, 96278-2060. The product must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each label must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The shelf life is strictly limited to eighteen months, with no more than three months having passed from the date of manufacture to the date of government delivery. Bidders must clearly state the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Additionally, the contract incorporates provisions for the removal of government identification from non-accepted supplies and confirms that covered defense information may apply. The solicitation closes on August 11, 2026, and delivery is required within twenty days of award.

All Other Industrial Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

BATTERY, DEFIBRILLATOR

Solicitation # SPE2DH-26-T-5775

A 12VDC lithium battery with approximately 9.2 grams of lithium content is specified for use with Cardiac Science PowerHEART G5 AEDs, sold in units of each. The battery must be stored between 20°C and 30°C to maintain integrity and performance. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition scale. Packaging must comply with DLA procurement standards, and non-accepted supplies must have government identification removed. Covered defense information provisions may apply. The item is identified by NSN 6135-01-652-9622 with a quantity of four units required under purchase request 7017720173, and delivery is due within 20 days after award. The solicitation number is SPE2DH-26-T-5775, posted on August 4, 2026, with responses due by August 11, 2026. The contract is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA, with performance located in San Diego, California, and primary point of contact being Tina Vu at tina.vu@dla.mil.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

FLOSS, WAXED, DENTAL

Solicitation # SPE2DH-26-T-5773

The contract specifies the procurement of dental floss, waxed, nylon, 200 yards per roll, for military use under NSN 6520-01-500-1520, with a unit of issue as each and a requested quantity of 25 units. The product must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation, issued under SPE2DH-26-T-5773, requires bidders to clearly state the source and part number being offered and targets delivery within 84 days ADO to an APO address with ZIP 09227-0000. The purchasing agency is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact, and the solicitation closes on August 11, 2026, under NAICS code 325620 for manufacturing of dental appliances and equipment.

Toilet Preparation Manufacturing

POSTED

about 13 hours ago

DEADLINE

DRAPE, SURGICAL

Solicitation # SPE2DH-26-T-5770

The contract is for the procurement of 4 packages of surgical drapes, each containing 40 disposable, sterile, antimicrobial adhesive drapes measuring 35 inches by 23 inches and impregnated with IOBAN. The item is identified by NSN 6530-01-181-8247 and must be delivered within 20 days of award. All units must be sealed in individual containers that protect against damage and packed in commercial shipping containers suitable for safe transport at the lowest cost to the delivery point at Fort Hood, Texas. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all data provided must be adequate to support compliance with federal procurement standards. The solicitation number is SPE2DH-26-T-5770, with a response deadline of August 11, 2026, and primary point of contact is Tina Vu.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

DRAPE, SURGICAL

Solicitation # SPE2DH-26-T-5764

The contract specifies the procurement of surgical drapes, specifically an adhesive U-drape measuring 47 inches by 51 inches with a U-slot opening of 20 by 6.375 inches, designed to be impervious for sterile surgical use. Each unit is packaged in a sealed container to prevent damage or contamination, with 40 units per package, and a total of two packages are ordered. The product must maintain a 36-month shelf life from the date of manufacture, with no more than six months elapsed between manufacturing and delivery to the government. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be shipped in commercial exterior containers suitable for safe transit by common carriers at the lowest rate to the designated delivery point at Fort Hood, Texas. The material must be marked per DLA’s medical marking guidelines, and all packaging requirements align with DLA’s RP001 standards. The NSN is 6530-01-150-3925, with a solicitation number SPE2DH-26-T-5764 issued on August 4, 2026, and responses due by August 11, 2026. Delivery is required within 20 days of award. The contracting authority is the Department of Defense under the Medical Supply Chain FSH, and the primary point of contact is Tina Vu.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

TEST PAPER, CHLORINE DE

Solicitation # SPE2DH-26-T-5766

The contract specifies the procurement of chlorine determination test paper, designed for accurate chlorine level measurement with a color chart ranging from 10 to 200 ppm, supplied in two 15-foot rolls of 5/32 inch width, sufficient for 200 tests. Each package contains ten units, with a total order of four packages. The product is governed by the procurement document SPE2DH-26-T-5766 and must comply with the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, removal of government identification from non-accepted supplies under RQ011, and medical marking requirements per Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in commercial-quality containers and packed in exterior shipping containers suitable for safe, cost-effective transport to the delivery point at Arcadia, ZIP 34266-8836. The item has a non-extendable shelf life of 36 months, with no more than five months allowed to have passed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, and the contract number or lot number, following the latest revision of MMS1C. The NSN is 6630-01-012-4093, and delivery is required within 20 days of award. The solicitation, issued on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Covered defense information provisions and applicable DLA packaging requirements must be fully adhered to, ensuring compliance with federal procurement standards.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

PANEL, MODULAR, MEDIC

Solicitation # SPE2DH-26-T-5769

The contract calls for two modular medical panels designed for primary care operations in field environments, each constructed from black Cordura nylon with MOLLE compatibility to allow seamless integration with existing military equipment systems. These panels provide organized, immediate-access storage for medical supplies and equipment used to manage sick call patients in operational settings, ensuring efficient triage and treatment capabilities in both fixed and temporary facilities. The item is identified by NSN 6530-01-518-0118, with a requirement for delivery within 20 days of award, and must fully comply with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, including packaging and government identification removal standards. Bidders must clearly specify the source and part number being submitted, as this solicitation is issued under contract number SPE2DH-26-T-5769 by the Department of Defense’s Medical Supply Chain FSH, with performance located at Fort Bliss, Texas. The solicitation was posted on August 4, 2026, and responses are due by August 11, 2026, under NAICS code 314910 for other textile product mills. Tina Vu of DLA serves as the primary point of contact for inquiries, and all submissions must adhere to DLA procurement and packaging directives applicable to the solicitation issue date, with no set-aside provisions specified.

Textile Bag and Canvas Mills

POSTED

about 13 hours ago

DEADLINE