Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical Packaging and Labeling Services

Active

Federal

Response Deadline08/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Medical Packaging and Labeling Services is issued by the Department of Defense under the Medical Supply Chain FSH. The primary objective is to ensure that the packaging and labeling of filter cassettes in sealed unit containers strictly adhere to Medical Marking Standard No. 1 and meet all destination inspection requirements. The project is categorized under NAICS code 325992 and will be performed at MCBH Kaneohe Bay, Hawaii. The solicitation was posted on August 16, 2026, with a response deadline set for August 24, 2026.

General Info

DoD subcontract for medical packaging and labeling services at MCBH Kaneohe Bay, Hawaii.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

325992 - Photographic Film, Paper, Plate, Chemical, and Copy Toner ManufacturingView NAICS

Place of Performance

MCBH KANEOHE BAY, HI, 96863-3048, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DH-26-T-5997.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CASSETTE, FILTER

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 16

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure sealed unit container packaging and labeling of filter cassettes comply with Medical Marking Standard No. 1 and destination inspection requirements.

Similar Contracts

Same NAICS industry code

Water Treatment Chemical SupplyThis subcontract opportunity, managed by the Florida Facilities and Parks agency, involves the supply of industrial water treatment chemicals. The scope of work focuses on providing EPA-compliant corrosion inhibitors, biocides, and scale inhibitors specifically for use in boiler, chilled water, and cooling tower systems. The solicitation was posted on August 17, 2026, and requires responses to be submitted by September 16, 2026. Classified under NAICS code 325992, this procurement is aimed at ensuring the proper chemical maintenance of critical water systems. Interested parties can find further details through the OpenGov procurement portal.

Facilities & Parks

POSTED

about 14 hours ago

DEADLINE

Medical Device Packaging and Labeling ServicesThis subcontract for the Department of Defense, specifically the Medical Supply Chain MD Surg FSF, requires the provision of DLA-compliant packaging, preservation, labeling, and kitting services for surgical oxygen connectors. All work must adhere to strict military medical standards to ensure the integrity and usability of the devices. The project is based in Fort Bragg, North Carolina, under NAICS code 325992. Interested parties must submit their responses by August 24, 2026, following the solicitation posted on August 16, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Specialized Packaging and Labeling ServicesThis subcontract for Specialized Packaging and Labeling Services is issued by the Department of Defense through the ASC Supplier Oper AE and AF Div. The scope of work involves the contract packaging and labeling of urine collection pouches in strict accordance with military standards, requiring specific barcoding, material compliance, and detailed traceability documentation. The performance of these services will take place in New Cumberland, Pennsylvania. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 325992. The solicitation was posted on August 16, 2026, with a response deadline of August 24, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Medical Device Packaging and LabelingThis subcontract involves specialized packaging and labeling services for the Depth Perception Apparatus, managed by the Department of Defense under the Medical Supply Chain MD Surg FSF. The work must be performed in strict compliance with DLA MMS No. 1 standards, specifically requiring precise NSN marking, lot control, and MFD labeling to ensure medical device regulatory adherence. The project is categorized under NAICS code 325992 and is set for performance at FPO 96671. Interested parties must respond by August 24, 2026, following the posting date of August 16, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical-Grade Packaging and Labeling ServicesThis subcontract for Medical-Grade Packaging and Labeling Services is issued by the Department of Defense under the Medical Supply Chain MD Surg FSF. The scope of work involves the final packaging and labeling of diagnostic flashlights to ensure full compliance with DLA standards, specifically MIL-STD-129, MMS NO. 1, and ASTM D3951. Requirements include the application of proper NSN, lot numbers, CAGE codes, and unit of issue markings on sealed unit containers. The project is categorized under NAICS code 325992 and will be performed at Fort Bragg, ZIP code 28310. The solicitation was posted on August 16, 2026, with a response deadline of August 24, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Moisture Traps (TRAP, MOISTURE)This subcontract opportunity is issued by the Department of Defense Fluid Handling Division for the procurement of nine units of military-grade moisture traps. These desiccants are specifically designed for the packaging of sensitive or hazardous materials and must comply with all applicable technical specifications. The contract falls under NAICS code 325992 and specifies a place of performance in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of August 27, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

NSN 664001655851 Chemical or Diagnostic Reagent SupplyThis subcontract involves the procurement and delivery of NSN 664001655851, which is identified as a chemical or diagnostic reagent typically utilized in medical or environmental testing. The contract is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF agency, falling under NAICS code 325992. The solicitation was posted on August 16, 2026, with a response deadline of August 24, 2026. Performance for this contract is designated for FPO 96695.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Sterile Medical Packaging and Kitting ServicesThis subcontract for Sterile Medical Packaging and Kitting Services involves the final sterile packaging, kitting, and palletization of cytology brush components. The objective is to ensure all sealed units are fully compliant with Department of Defense and DLA military packaging standards. The project is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense, with the place of performance located in Lemoore, California. Interested parties must respond by August 24, 2026, in accordance with the guidelines set for NAICS code 325992.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Corrosion-Inhibiting Compounds & Industrial SolventsThis subcontract opportunity with the Department of Defense involves the supply and delivery of MIL-spec corrosion inhibitors, such as TECTYL 275 and MIL-PRF-21260, specifically for use in ultrasonic cleaning tanks. The contractor must ensure all materials are delivered with proper labeling, safety data sheets, and compliant packaging. Performance for this contract will take place at Camp Lejeune, zip code 28547. The solicitation is categorized under NAICS code 325992 and is designated as a Historically Underutilized Business Zone set-aside. Interested parties must submit their responses by the deadline of August 21, 2026, at 6:00 PM. The procurement is managed by the Commanding General within the Department of Defense.

Commanding General

POSTED

DEADLINE

Repair Patch Kit and Seal Grease SupplyThis subcontract, issued by the Department of Defense under the Commanding General, involves the supply of marine-grade adhesive patch kits and silicone seal grease intended for the field maintenance of dry suits. The project is designated as a total Small Business Set Aside under NAICS code 325992, with the place of performance located at Camp Lejeune, North Carolina. The opportunity was posted on August 14, 2026, with a response deadline of August 18, 2026. Interested parties must adhere to this tight timeframe to submit their proposals for the provision of these specialized maintenance materials.

Commanding General

POSTED

DEADLINE

Specialty Chemical Packaging and Labeling ServicesThis subcontract for Specialty Chemical Packaging and Labeling Services focuses on the professional packaging, labeling, and preparation of agricultural chemicals. The primary objective is to ensure that all products are tamper-proof, damage-resistant, and fully compliant with regulatory standards to guarantee safe delivery. The procurement process is managed by the Louisiana Procurement agency under NAICS code 325992. Interested parties must submit their responses by the deadline of September 9, 2026, at 4:00 PM. Further details and application procedures can be accessed through the official Louisiana procurement portal.

POSTED

DEADLINE

Defense-Grade Engine Lubricant SupplyThis subcontract, issued by the Department of Defense under the ASC Supplier Oper OEM Division, requires the manufacture and delivery of 40 units of military-specification engine lubricating oil. The product must adhere to National Stock Number 9150015429479 and comply with QPL and MIL-STD-129 standards, ensuring a minimum shelf-life of 36 months. The procurement falls under NAICS code 325992 and specifies Tracy, California, as the place of performance. Interested parties must submit their responses by the deadline of August 21, 2026, following the posting date of August 13, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

DENTAL SCREWDRIVER

Solicitation # SPE2DH-26-T-6045

This solicitation from the Department of Defense Medical Supply Chain issued by the Defense Logistics Agency is for the procurement of two dental screwdrivers with a 6.5mm shaft and an overall length of 20mm. The contract requires the supplier to specify the source and part number being provided and mandates a delivery timeframe of 20 days after the order is received. The agreement is subject to specific technical and quality requirements as outlined in the DLA Master List, as well as standard DLA packaging requirements and regulations regarding the removal of government identification from non-accepted supplies. Performance is set for Lemoore, California, and the procurement falls under NAICS code 339114.

Dental Equipment and Supplies Manufacturing

POSTED

about 10 hours ago

DEADLINE

TIP, SYRINGE, AIR-WATER

Solicitation # SPE2DH-26-T-6046

This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of disposable dental air-water syringe tips under solicitation number SPE2DH-26-T-6046. The required items are clear plastic tips designed to deliver separate air and water for use with the Dental Portable Operating System, identified by NSN 6520-01-586-9272. The contract specifies a total quantity of five packages, with each package containing 1,000 units divided into four bags of 250. The delivery timeline is set for 20 days after receipt of order, with the place of performance located in Pensacola, Florida. Bidders are required to specify the source and part number being supplied and must adhere to DLA packaging requirements and technical quality standards. The response deadline for this federal procurement is August 24, 2026.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

SPATULA, LABORATORY

Solicitation # SPE2DH-26-T-6039

This contract is for the procurement of 15 laboratory spatulas under solicitation SPE2DH-26-T-6039 for the Department of Defense Medical Supply Chain. The items are identified by NSN 6640-00-439-7367 and must be delivered FOB destination to JB Andrews, Maryland, within 20 days. Bidders are required to specify the company and part number being supplied, with referenced options including Labsource, Inc. and UTech Products Inc. The agreement mandates strict adherence to DLA packaging requirements and Medical Marking Standard No. 1, ensuring each unit is in a sealed container to prevent damage. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. All shipments must be sent via traceable means, and the contractor must comply with the DLA Master List of Technical and Quality Requirements and covered defense information protocols.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

PIN, LEG ADJUSTMENT ASS

Solicitation # SPE2DH-26-T-6052

This contract is for the procurement of leg adjustment assembly pins for dental chairs, specifically identified by NSN 6520-01-590-9209. The requirement is split across three line items with total quantities of two, three, and two units respectively. The items are regulated by the FDA and must be supplied by a bidder who specifies the source and part number, with Aseptico Inc part number 460445-08 noted as a reference. Delivery is required within five days after the order, with a required delivery date of August 18, 2026. Shipping is FOB Destination to Joint Base Lewis MCCH in Washington. The contract mandates strict adherence to DLA packaging requirements, Medical Marking Standard No. 1, and MIL-STD-129 for labeling. All shipments must be sent via the fastest traceable means, and the use of parcel post is prohibited.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

SOLUTION, EYE WASH

Solicitation # SPE2DH-26-T-6057

This contract is for the procurement of 32 ounce bottles of eye wash solution designed for use with eye wash station NSN 4240-01-310-0636. The product must have a shelf life of 36 months, and no more than five months may have passed from the date of manufacture to the date of delivery to the government. Labels must clearly display the NSN, manufacturer and CAGE code, manufacture or expiration dates, and the contract or lot number. Bidders are required to specify the source and part number being supplied. The delivery is required within 20 days after the order is placed for the specified quantity. All items must be packaged in sealed unit containers and shipped in commercial exterior containers to ensure safe delivery to Holloman AFB. All materials must adhere to Medical Marking Standard No. 1. This solicitation is managed by the Department of Defense Medical Supply Chain FSH under solicitation number SPE2DH-26-T-6057.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

CUSHION, THERAPEUTIC

Solicitation # SPE2DH-26-T-6044

This contract is for the procurement of three therapeutic cushions, identified by NSN 6530-01-700-0587 and part number AXR366. The order is issued by the Department of Defense Medical Supply Chain and requires delivery to the Medical Logistics facility at Fort Bragg, North Carolina, within five days after the order is placed. The shipment must be sent via the fastest traceable means, excluding parcel post, with delivery and inspection terms set as FOB Destination. The items are not regulated by the FDA but must strictly adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129 for marking requirements. Packaging must be commercial grade, utilizing sealed unit containers and suitable exterior shipping containers to prevent damage. The contract also incorporates specific DLA technical and quality requirements, including RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies.

Surgical Appliance and Supplies Manufacturing

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE2DH-26-T-6058

This solicitation from the Department of Defense Medical Supply Chain seeks the procurement of one package of non-latex super rubber dams. The required items are teal green, regular medium size, measuring 6 by 6 inches, with each package containing 15 sheets. The product is identified by NSN 6520-01-717-7806 and must be delivered within 20 days after the order is placed. The contract is managed by the Defense Logistics Agency and requires compliance with specific technical, quality, and packaging standards, including the removal of government identification from any non-accepted supplies. Bidders are required to specify the source and part number being supplied. The place of performance is designated as Joint Base Charleston, South Carolina.

Dental Equipment and Supplies Manufacturing

POSTED

about 10 hours ago

DEADLINE

WATER SAMPLING TEST

Solicitation # SPE2DH-26-T-6049

This contract is for the procurement of one package of fluoride water sampling test reagents using the Hach SPADNS 2 method and Accuvac ampules. The product is designed for drinking water and wastewater reporting, ensuring EPA compliance and equivalence to the SM 4500-FD reference method, with a detection range of 0.02 to 2.00 mg/L F. Each package contains 25 units. The supplier must adhere to strict quality and packaging standards, including Medical Marking Standard No. 1 and DLA packaging requirements. The item has a non-extendable shelf life of 60 months, and no more than 8 months may have elapsed from the date of manufacture to the delivery date. Additionally, the supplier must comply with the Hazard Communication Standard by providing Safety Data Sheets and labels in accordance with OSHA and 29 C.F.R. 1910.1200. Delivery is required within 20 days after the order.

Surgical and Medical Instrument Manufacturing

POSTED

about 10 hours ago

DEADLINE

TEST TUBE, BLOOD COLLEC

Solicitation # SPE2DH-26-T-6047

This contract is for the procurement of two packages of nonsterile glass vacuum blood collecting tubes, each containing 100 units. The tubes are 16 by 125 mm with a 15 ml capacity, feature a rubber cap, and contain no anticoagulant. The items must have a shelf life of 24 months, and no more than three months may have passed from the date of manufacture to the date of delivery to the government. The supplier must provide the source and part number and ensure all labels include the NSN, manufacturer and CAGE code, manufacture and expiration dates, and the contract or lot number. Packaging must meet commercial standards to prevent damage and breakage during shipping, and all materials must be marked according to Medical Marking Standard No. 1. Delivery is required within five days after receipt of the order for the location in Fort Bragg.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

LID, HOLDER, BIOHAZARD B

Solicitation # SPE2DH-26-T-6054

This contract is a solicitation from the Department of Defense Medical Supply Chain for one biohazard bag holder lid, identified by NSN 6530-01-697-9878. The item is designed for a rectangular steel wire frame that holds 22 x 28cm polyethylene biohazard bags and features a durable, easy-to-clean orange epoxy coating. This specific cover ensures regulatory compliance with 29CFR1910-1030(D)(2)(XIII)(A), which mandates covers for biohazard containers. The procurement is managed under solicitation SPE2DH-26-T-6054 with a delivery requirement of 20 days after the order is placed. Performance is set for Holloman AFB, and the contract incorporates several DLA technical and quality requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. The response deadline for this federal acquisition is August 24, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 10 hours ago

DEADLINE

BAG, STERILIZATION-BIOH

Solicitation # SPE2DH-26-T-6040

This contract is for the procurement of heavy duty, puncture resistant biohazard disposal bags designed for autoclaving biologically contaminated materials, such as culture dishes. The bags must be red or orange to indicate contamination and are issued in packages of 200 units. The order consists of one package under NSN 6530-01-078-0365, with a delivery requirement of 20 days after receipt of order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards. All items must be packed in sealed unit containers and shipping containers that ensure safe delivery to the destination. Marking must comply with Medical Marking Standard No. 1, and the contract is managed by the Department of Defense Medical Supply Chain.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

FOAM INSERT, ENDODON

Solicitation # SPE2DH-26-T-6059

This contract, identified as SPE2DH-26-T-6059, is a solicitation for the procurement of 18 packages of endodontic file foam inserts. Each package contains 48 units, and the item is identified by NSN 6520-01-533-2088 and manufacturer part number 33630 from Almore International Inc. The delivery is required within 84 days, with the destination serving as the point for both inspection and acceptance. Packaging must adhere to commercial standards and DLA packaging requirements, ensuring each unit is in a sealed container to prevent damage. All materials must be marked according to Medical Marking Standard No. 1. This acquisition is managed by the Department of Defense Medical Supply Chain and is not regulated by the FDA.

Dental Equipment and Supplies Manufacturing

POSTED

about 10 hours ago

DEADLINE