Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Medical Packaging and Labeling Services

Active

Federal

Response Deadline07/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of packaging services for medical items in full compliance with MIL-STD-2073-1E standards, encompassing all aspects of preservation, cushioning, and container selection to ensure the integrity and readiness of medical supplies during storage and transit. All packaging solutions must meet rigorous military specifications for durability, environmental protection, and long-term storage, with emphasis on maintaining sterility and functionality of medical equipment and supplies under varied operational conditions. The work is scoped under a subcontract issued by the Department of Defense through the Medical Supply Chain FSH, with performance required at the location in Suffolk, Virginia, ZIP code 23435-5000. The solicitation was posted on July 22, 2026, and responses are due by July 29, 2026, under NAICS code 325181 governing pharmaceutical and biological product manufacturing. While no set-aside details or point of contact are specified, bidders must align their proposals with the DLA’s DIBBS system via the provided UI link to participate.

General Info

Packaging medical items to MIL-STD-2073-1E standards in Suffolk, Virginia, for DoD under NAICS 325181.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

325181 - Alkalies and Chlorine ManufacturingView NAICS

Place of Performance

SUFFOLK, VA, 23435-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 05:00:00 PM UTCin about 23 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-STD-2073-1E compliant packaging including preservation, cushioning, and container selection for medical items.

Similar Contracts

Same NAICS industry code

U.S.-Preferenced Duct and Conduit Supply

Transportation and Development

POSTED

DEADLINE

Louisiana-Preferenced PVC Pipe Manufacturing & Supply

Transportation and Development

POSTED

DEADLINE

Hydrofluosilic Acid Supply and DeliveryThe contract involves the supply of bulk Hydrofluosilic Acid (H2SiF6) for use in municipal water fluoridation across Texas treatment facilities, with full responsibility for packaging, transportation, and delivery to designated sites. The material must meet or exceed EPA and industry-specific purity standards to ensure safe and effective public water treatment. The subcontract is issued by the Trinity River Authority of Texas and is targeted at qualified suppliers capable of consistently delivering high-quality chemical input under strict regulatory compliance. Performance is required throughout Texas, with no specific delivery location detailed, implying broad coverage across multiple water system endpoints. Bid responses must be submitted by August 12, 2026, at 5:00 PM, following the July 22, 2026 posting of the solicitation. The industry classification under NAICS code 325181 indicates the focus on industrial chemical manufacturing and distribution. While the contract does not specify a set-aside program or organizational eligibility restrictions, all proposers are expected to demonstrate proven experience in handling hazardous chemical logistics and compliance with federal drinking water regulations. The contract underscores the critical role of reliable, high-purity chemical supply in maintaining public health infrastructure through standardized water fluoridation practices.

Trinity River Authority of Texas

POSTED

DEADLINE

PVC Sanitary Sewer Pipe SupplyThe contract entails the supply of 4-inch PVC SDR-26 sanitary sewer pipe in green color, manufactured to meet stringent industry standards including ASTM D1784 for plastic materials, ASTM D3212 for installation and jointing, TxDOT specifications, and AWWA guidelines to ensure durability and compatibility with municipal infrastructure. The material must adhere to all technical requirements for pressure rating, dimensional tolerances, and long-term performance under sanitary sewer conditions. All piping must be properly labeled, packaged, and shipped to comply with regulatory and inspection protocols to guarantee quality control throughout the supply chain. The solicitation is structured as a subcontract under the agency name Utility Operations in Texas, with a posting date of July 19, 2026, and a firm response deadline of August 12, 2026. The NAICS code 325181 identifies this as part of the plastic pipe and pipe fitting manufacturing sector. No set-aside designation is specified, indicating open competition among qualified suppliers. Performance location details are not provided, implying delivery may be required across unspecified sites within Texas. Interested parties must submit proposals through the designated online portal before the deadline to be considered for award.

Utility Operations

POSTED

DEADLINE

Water Treating Chemical SupplyThe contract titled Water Treating Chemical Supply is a subcontract issued by the Mississippi Department of Finance and Administration under the agency name MPTAP, focused on the procurement of essential chemicals for wastewater treatment operations. It requires the supply of coagulants, disinfectants, and pH adjusters necessary to maintain regulatory compliance and operational efficiency in public wastewater systems. The solicitation was posted on July 16, 2026, and responses must be submitted by July 30, 2026, with no set-aside provisions specified, indicating open competition among eligible vendors. The NAICS code 325181 identifies the industry as other chemical manufacturing, aligning with the production of specialized water treatment chemicals. The place of performance and precise delivery locations are not detailed in the data, but the work is expected to serve facilities under the jurisdiction of the Mississippi agency. All vendors must meet technical and logistical requirements to deliver consistent, high-quality chemical batches in accordance with industry standards and treatment plant specifications.

POSTED

DEADLINE

Supply of Electrolytic Sulfuric Acid (Chemical Supplier)The contract outlines the procurement and delivery of 2,000 gallons of Sulfuric Acid, Electrolyte, identified by NSN 6810002499354, to Al Udeid Air Base in Qatar. The supplier is required to fully comply with all applicable DLA, DPAS, and DOT hazardous materials regulations to ensure safe handling, packaging, transportation, and delivery. This procurement is executed under a subcontract through the Defense Logistics Agency, which operates under the Department of Defense, and is classified under NAICS code 325181 for other chemical and allied products manufacturing. The solicitation was posted on July 16, 2026, and the performance location is strictly limited to the specified military installation in Qatar, with no alternative delivery points permitted. All materials must meet exact military specifications for purity and safety, and delivery schedules must align with operational requirements at the base.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Acetic Acid Solution (Chemical Procurement)The contract requires the procurement, packaging, labeling, and timely delivery of one box of Acetic Acid Solution, identified by NSN 6810015815557, to ASD Jacksonville, Florida, in full compliance with federal logistics and shipping regulations. All aspects of the shipment, including packaging materials and labeling, must adhere to federal standards to ensure safe handling and transport of this chemical substance. Delivery must be completed FOB destination no later than August 4, 2026, placing the responsibility for transit risks and costs on the supplier until the goods are received at the specified delivery point. The contract falls under NAICS code 325181, associated with other chemical product manufacturing, and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense, indicating its alignment with defense supply chain requirements. The solicitation is linked to an active award through the DIBBS system under contract SPE4AX16D9008, and no set-aside provisions are applicable.

Defense Logistics Agency

POSTED

DEADLINE

Isopropyl Alcohol Supply and Delivery

Defense Logistics Agency

POSTED

DEADLINE

Supply of Sodium Chromate, Anhydrous (Chemical Material)

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

STRETCHER, PATIENTThe contract specifies the procurement of a Rapid Extraction Patient Stretcher, low profile, in O.D. Green, designed for swift and safe patient extraction in battlefield and high-risk environments. The system includes the stretcher body with part number SK-RESLP01-GR, a Cordura backpack (SK-RES02-CB), a pair of horizontal lift slings (SK-RES03-GR), a Sked tow strap (SK-204), and a steel locking D-carabiner (SK-206-B). Manufactured by Panakeia, LLC (CAGE 6A4F9), the item is classified as a Class I medical device by the FDA, requiring compliance with registration, listing, labeling, and GMP standards despite not needing a 510(k) premarket notification. All components must be marked per the latest Medical Marking Standard No. 1 and packed according to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging requirements. The NSN is 6530-01-723-3554, and the unit of issue is EA. Delivery is required within 20 days to Fort Bragg, North Carolina, FOB destination, with zero tolerance for quantity variance. The item is subject to federal medical device regulations, and the contracting officer must submit an EBS referral for FDA confirmation. The contract is issued under solicitation SPE2DH-26-T-5527, with a response deadline of August 3, 2026, and the original required delivery date is July 28, 2026. Freight must be shipped via traceable means, excluding parcel post, with detailed labeling and shipment controls applied.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

POINT, ENDODONTICPOINT ENDODONTIC GUTTA PERCHA CONE WHITE ISO SIZE NO 15 is a dental material designed for use in root canal treatments to seal and close the root canals of teeth. Each package contains 200 cones, organized in six vials of 20 cones each, with a firm yet flexible composition suitable for use with any condensation technique. The cones are hand-rolled and conform to ISO size 15 specifications for standardized clinical application. The item is classified as a TYPE I R-coded product with a fixed shelf life of 48 months that cannot be extended, and it is subject to DLA packaging, quality, and technical requirements as defined in the DLA Master List of Technical and Quality Requirements. Government identification must be removed from non-accepted supplies, and covered defense information may apply. The NSN is 6520-00-904-1981, with a procurement quantity of five packages, a required delivery within five days of award, and a solicitation issued under SPE2DH-26-T-5544. Bidders must specify the source and part number being supplied, and the primary point of contact for the contract is Tina Vu of the Department of Defense Medical Supply Chain, with performance centered in Suffolk, Virginia.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

BAG, OXYGEN MANAGEMENTThe oxygen management bag is constructed from 1000 denier nylon with full high-density foam padding to safeguard the oxygen cylinder and regulator during transport. It features three closeable interior pockets for storing accessories, elastic airway loops for secure attachment, a 2-inch wide carrying handle, and a vinyl-coated bottom for durability and easy cleaning. The bag includes a rifle sling-style strap, reinforced steel rings and hooks for secure mounting, and reflective trim on both sides for enhanced visibility in low-light conditions. Weighing two pounds and measuring 9.5 inches diagonally by 21 inches in length, it is designed for portability and rugged use. The item is identified by NSN 6530-01-692-9797 and is being procured in a quantity of one unit under Purchase Request 7017623669 with a delivery deadline of 20 days ADO. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards and government identification must be removed from rejected supplies. The solicitation, issued under SPE2DH-26-T-5535 on July 27, 2026, with a response deadline of August 3, 2026, is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance centered in Norfolk, Virginia, and point of contact Tina Vu at tina.vu@dla.mil.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

WATER PURIFICATION,The contract specifies the procurement of water purification tablets composed of sodium percarbonate at 5–15 percent, cationic surfactants at 1–3 percent, and silver nitrate at 0.1–0.5 percent, formulated as solid white tablets with a bulk density of 1.5–1.7 g/cm³. Each unit of issue is a package containing 50 tablets, identified by NSN 6520-01-535-2663, with a total quantity of three packages required. The product has a non-extendable shelf life of 18 months, classified as a TYPE I (CODE K) item under strict retention standards. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA procurement standards, and government identification must be removed from any non-accepted supplies. The item is subject to Covered Defense Information protocols, and bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DH-26-T-5530 on July 27, 2026, requires responses by August 3, 2026, with delivery due within 20 days of award to Fort Bragg, North Carolina, 28310. Primary point of contact is Tina Vu at the Department of Defense, Medical Supply Chain FSH.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

BLOOD COLLECTING UNITThe blood collecting unit is a medical device featuring a 7-inch tubing with a Luer adapter and a 21-gauge needle measuring 0.75 inches, equipped with a manually activated safety shield designed to fully cover the needle upon use to enhance user safety. Each unit is sold in packages of 200, identified as one PG, and must comply with rigorous technical and quality standards as outlined in the DLA Master List of Technical and Quality Requirements, with specific references to R numbers for compliance. The item is subject to the DLA Packaging Requirements, must be marked in accordance with Medical Marking Standard No. 1 which replaces MIL-STD-129, and requires packaging in sealed, commercial-grade unit containers that ensure protection from damage, with exterior shipping containers suitable for safe and cost-effective delivery to the specified point of performance at Fort Bliss, Texas. The product has a non-extendable shelf life of 36 months, with no more than five months elapsed between the date of manufacture and the date of delivery to the government. All labeling must include the date of manufacture, expiration or retest date, and the contract or lot number, following the latest revision of MMS1C. The NSN 6630-01-411-6524 is linked to solicitation SPE2DH-26-T-5522, with bids due by August 3, 2026, and delivery required within 20 days of award. The acquisition is under the North American Industry Classification System code 334519, managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must provide the source and part number being offered and ensure all items meet applicable defense information handling protocols and government packaging and marking directives.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

LITTER, NONRIGID, POLELEThe contract specifies the procurement of 14 units of a nonrigid, poleless litter designed to be compact and shoulder-carried with quick-release straps, capable of supporting a minimum weight capacity of 450 pounds. When unpacked, the litter measures 65 inches by 23 inches and, when packed, it must compress to dimensions of 10 inches by 7 inches by 1.5 inches thick, with all units finished in black. The product is classified as a Class I medical device under FDA regulation 880.6900, requiring compliance with registration, listing, labeling, and good manufacturing practices, even though a 510(k) premarket notification is not mandated. All units must be marked in accordance with the latest edition of the Medical Marking Standard No. 1, superseding MIL-STD-129, and packaged per DLA’s packaging requirements and MIL-STD-2073-1E, using commercial-grade sealed unit containers and exterior shipping containers suitable for safe carrier transport at the lowest rates. Each unit must be individually marked with the manufacturer’s part number PHL-K-B by TACMED SOLUTIONS, LLC, and the NSN 6530-01-600-7741, with final delivery due in 84 days FOB destination, strictly with no variance in quantity. The delivery address is the U.S. Army Medical Materiel Center in Kaiserslautern, Germany, with the initial required delivery date set for July 27, 2026, and the contract is issued under solicitation SPE2DH-26-T-5533 with point of contact Tina Vu at DLA.

Alumina Refining and Primary Aluminum Production

POSTED

DEADLINE

SAFETY BOX AND INCINERThe safety box and incineration container is a 5-liter biomedical waste container made from recycled board, designed for safe disposal of sharps such as syringes up to 0.5 ml with needle caps, accommodating 155 units per box. External dimensions before assembly are 590 x 280 x 4.5 mm, reducing to 342 x 159 x 130 mm after assembly, with wall and base thickness of 1.3 mm and a 38 mm diameter syringe insert hole. The container is waterproof, labeled with a biohazard symbol in black and red print on a white surface, and complies with WHO PQS Code E10/01. Each unit is flat packed, with 25 boxes per case, intended for outdoor lighting or incineration. The product is part of a standardized joint procurement under the MMESO system and must meet DLA technical and quality requirements referenced by R and I numbers from the DLA Master List. Packaging, labeling, and government identification removal comply with DLA regulations RP001 and RQ011. The NSN is 6530-01-460-4782, with a procurement quantity of 8 cases for delivery within 20 days to Waco, TX, under solicitation SPE2DH-26-T-5531, issued by the Department of Defense Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

ANALYZER, BLOOD GLUCOSEThe contract specifies the procurement of five kits of the Prodigy Pocket Meter, a blood glucose analyzer designed for ease of use with no coding required, automatic power-on upon test strip insertion, and accurate results in seven seconds. The device is compact, lightweight, and supports alternate site testing with a minimal blood sample, making it suitable for patient self-monitoring. It includes a 120-test memory that records date and time and provides 7, 14, and 28-day average glucose readings. The unit of issue is a kit, and all supplies must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, with packaging ensuring protection from damage and safe delivery via common carrier at the lowest cost. Packaging and labeling must meet commercial standards as defined in the procurement documentation, and government identification must be removed from non-accepted supplies. The contract is issued under solicitation number SPE2DH-26-T-5524 with a response deadline of August 3, 2026, and requires delivery to Fort Stewart, Georgia, within 20 days of award. The NAICS code is 334515, and the purchasing agency is the Department of Defense under the Medical Supply Chain FSH. Bidders must clearly identify the source and part number being offered.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

PAD, ABSORBENT, LITTEThe contract specifies the procurement of absorbent patient litter pads designed to absorb blood, body fluids, and other wet solutions, compatible with all litter systems, lightweight, and durable. Each unit is packaged in sealed containers to prevent damage and shipped in commercial exterior containers ensuring safe delivery via common carriers at the lowest cost to the designated delivery point in Omaha, Nebraska. All items must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and are subject to DLA packaging requirements. The product is regulated by the FDA as a Class I device under regulation 880.5300, requiring registration, listing, proper labeling, and adherence to GMPs, though a 510(k)premarket notification is not required. Bidders must provide the manufacturer part number and source, and the acquisition is set aside for Service-Disabled Veteran-Owned Small Businesses. The solicitation number is SPE2DH-26-T-5532, with a response deadline of August 3, 2026, and a delivery requirement of 20 days after award. The NSN is 6530-01-557-1469, with a quantity of 2 packages, each containing 15 pads. Technical and quality requirements are governed by the DLA Master List, and covered defense information may apply.

Alumina Refining and Primary Aluminum Production

POSTED

DEADLINE

MOUTHGUARDThe contract specifies the procurement of single-density adult mouthguards in plastic yellow with Bactigon, designed to form to the teeth without a strap, with a unit of issue of one package containing 100 units. Two packages, totaling 200 mouthguards, are required under solicitation SPE2DH-26-T-5525, with a delivery deadline of 10 days after award. All units must be sealed in individual protective containers and packed in commercial shipping containers suitable for safe transport by common carriers at the lowest cost to the designated delivery point. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all items must be labeled in accordance with this standard. The supplies are subject to DLA packaging requirements and technical quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect at the time of solicitation or award. The NSN is 6520-01-486-5546, the acquiring agency is the Department of Defense under the Medical Supply Chain FSH, and inquiries should be directed to Tina Vu at the provided contact information.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

GUTTA PERCHA POINTS, ENGutta percha points for root canal therapy, size 35, are supplied in boxes of 60 points each, designed for use with all ISO .04 taper files and intended for placement into canals after endodontic treatment. Each point is hand-rolled, radiopaque, cadmium-free, and laser-inspected for dimensional accuracy, ensuring consistency and reliability in clinical applications. The packaging is spill-proof and color-coded for easy identification, meeting DLA packaging requirements and complying with shelf life standards of 24 months, extendable as applicable to Type 2 items. These points serve as a complementary component to modern-shaped endodontic files and are supplied under the NSN 6520-01-532-0648 with a total quantity of 15 packages, requiring delivery within five days of award. This solicitation, identified as SPE2DH-26-T-5538, is issued by the Department of Defense through the Medical Supply Chain FSH for procurement under NAICS code 339114 and incorporates technical and quality requirements referenced in the DLA Master List, with applicable revisions controlled by the solicitation issue or award date. Covered defense information potentially applies, and government identification must be removed from non-accepted supplies. Bidders must specify the source and part number being offered, and all responses are subject to the terms outlined in the DLA procurement framework. The point of contact is Tina Vu, reachable via email and phone, with the place of performance designated as Eglin AFB, Florida.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

INCUBATOR, DRY HEATThe contract is for the procurement of two dry heat incubators designed for laboratory applications requiring precise temperature control and stability, with a range of ambient plus five to 120 degrees Celsius. These multi-purpose units are suitable for incubating cultures, conducting enzyme reactions, immunological assays, and determining melting or boiling points. Each unit includes a VWR heater block digital 2 120 with part number 75838-282, two VWR block modules with 20 holes of 13 mm diameter (part number 13259-130), and a transit case (part number DSI-051524-2000). The item is identified by NSN 6640-01-730-9677 and is ordered in quantities of two under purchase request 7017628351. Delivery is required within 20 days of award. The solicitation is issued under contract number SPE2DH-26-T-5548 with a response deadline of August 3, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements are governed by the DLA Master List, and packaging and identification standards must comply with DLA regulations including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Tina Vu, with email and phone provided.

All Other Industrial Machinery Manufacturing

POSTED

DEADLINE