Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical Product Packaging and Labeling

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the packaging and labeling of pharmaceutical tubes in full compliance with military and medical standards, specifically referencing MIL-STD-129, Medical Marking Standard No. 1/1A, and all hazard communication mandates. This work involves precise adherence to labeling formats, barcode requirements, and safety information to ensure uniformity and regulatory compliance across defense and healthcare supply chains. The packaging must support secure transport, clear identification, and traceability for use in military medical operations. The solicitation is classified as a subcontract under NAICS code 323120, issued by the Department of Defense through the Medical Supply Chain Pharm FSA. The response deadline is August 10, 2026, with the opportunity posted on August 2, 2026. Performance location details are not specified, but the work is intended to support federal medical logistics. Interested parties must submit proposals through the DIBBS portal before the deadline to remain eligible for award consideration.

General Info

Pack and label pharmaceutical tubes per military and medical standards for DoD supply chain by August 10, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSAView Agency

NAICS

323120 - Support Activities for PrintingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Packaging and labeling of pharmaceutical tubes per military and medical standards including MIL-STD-129, Medical Marking Standard No. 1/1A, and hazard communication requirements.

Similar Contracts

Same NAICS industry code

Standard-Size Color and Black-and-White PrintingThe contract is for high-volume printing services involving standard-sized documents, specifically color prints on 11” x 17” sheets and black-and-white prints on 22” x 34” sheets, with full collation and delivery included. It is classified as a subcontract under NAICS code 323120, which pertains to commercial printing, and is being issued by the California Department of Water Resources under the state of California. The solicitation was posted on July 31, 2026, with a response deadline of August 26, 2026, at 7:00 PM Pacific Time, allowing interested vendors to submit proposals within this window. The place of performance and point of contact details are not specified, and there is no set-aside classification indicated, meaning the contract is open to all eligible subcontractors. The event can be accessed through the California eProcurement portal for further details or submission.

California Department of Water Resources

POSTED

DEADLINE

Invitation for Bid 10220685 for printing and reproduction services

Solicitation # 10220685

The California Department of Water Resources is soliciting bids for Printing and Reproduction Services under Invitation for Bid 10220685, with a response deadline of August 26, 2026. Contractors must submit their proposals by the deadline and are required to maintain a place of business within twenty-five miles of 715 P Street, Sacramento, California, 95814, to ensure timely and local service delivery. The solicitation is open to all eligible bidders without specific set-aside classifications and is managed under the state-level procurement system with no NAICS code designated. Primary contact for inquiries is Elizabeth Medeiros, reachable by phone at 916-651-6929 or via email at elizabeth.medeiros@water.ca.gov. This procurement aims to secure reliable printing and reproduction support for the Department’s operational needs across California.

California Department of Water Resources

POSTED

DEADLINE

Military Marking and Labeling ServicesThe contract requires the application of compliant military labeling and marking services in accordance with MIL-STD-129 and specified contract terms, ensuring that all items are properly identified with required data elements including the National Stock Number, Commercial and Government Entity code, lot number, and standardized barcoding. This work is critical for logistics traceability and inventory management within the Department of Defense supply chain, requiring strict adherence to federal standards for uniformity, legibility, and durability of markings. The contracting activity is managed by the Defense Logistics Agency under the NAICS code 323120, indicating the work falls under printing and related support activities, and is structured as a subcontract with performance expected across the Department of Defense’s operational framework, though specific geographic details are not provided.

Defense Logistics Agency

POSTED

DEADLINE

Military Shipment Marking and Labeling ServicesThe contract requires the application of standardized military markings and labels to shipments and containers in strict accordance with MIL-STD-129, encompassing the use of barcoding and compliance with MIL-B-117 packaging standards. All work must ensure accurate, durable, and government-compliant labeling for secure and traceable logistics operations across military supply chains. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where all marking and labeling services must be executed. This subcontract, classified under NAICS code 323120, is issued by the Fluid Handling Division of the Department of Defense and was posted on July 30, 2026, with responses due by August 10, 2026. While no set-aside type is designated and no specific point of contact is provided, the directive emphasizes adherence to federal military standards and requires precision in packaging and identification procedures to support defense logistics. Contractors must be fully versed in the technical requirements of MIL-STD-129 and MIL-B-117 to meet compliance without deviation.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Medical Packaging and Labeling ServicesThe contract requires compliant packaging, labeling, and barcoding services for pharmaceutical shipments in accordance with Medical Marking Standard No. 1A and MIL-STD-129, ensuring all items meet rigorous military and medical supply chain specifications. Subcontractors must deliver precise, standardized labeling with accurate barcoding to support traceability, inventory control, and logistics efficiency across Department of Defense operations. The work is to be performed at Fort Lewis with a zip code of 98433-9500, and the NAICS code 323120 indicates the scope involves printing and related support activities for specialized packaging applications. The opportunity is classified as a subcontract with a response deadline of August 5, 2026, and was posted on July 30, 2026, under the Medical Supply Chain Pharm FSA. The contracting entity is part of the Department of Defense, and all submissions must adhere to the technical and compliance requirements outlined in the referenced standards. Bidders must be prepared to demonstrate capability in handling pharmaceutical materials with strict regulatory alignment, including proper documentation, material handling, and labeling accuracy to meet federal supply chain mandates. The solicitation is accessible via the DIBBS portal using the provided link for detailed submission instructions.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Packaging and Labeling Services for Medical SuppliesThe contract requires commercial packaging and labeling services for adhesive bandage cases, strictly adhering to MIL-STD-129 and MMS NO. 1 standards to ensure full compliance with Defense Logistics Agency requirements. All work must meet military-grade specifications for durability, clarity, and traceability of labeling, ensuring seamless integration into the Department of Defense supply chain. The packaging must accommodate the unique operational needs of military medical units, with attention to environmental resilience and standardized identification procedures. This is a subcontract opportunity posted by the Medical Supply Chain MD Surg FSF under the Department of Defense, with a North American Industry Classification System code of 323120. The place of performance is designated as FPO with a zip code of 96694, indicating delivery to U.S. military installations abroad. Bidders must submit responses by August 5, 2026, following the solicitation referenced as SPE2DS26T290E. There is no set-aside designation, meaning all eligible commercial vendors may compete, and the work is part of a broader effort to maintain consistent, compliant packaging for critical medical supplies deployed in theaters of operation.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Packaging and Labeling Services for Medical SuppliesThe contract requires custom packaging, labeling, and marking of medical ear plugs in strict compliance with the DLA Medical Marking Standard No. 1, ensuring all items are properly identified with the National Stock Number and contract number, along with hazard communication labels as mandated. The work must be performed at the designated place of performance in Fort Harrison, Montana, with ZIP code 59636-9725, and involves specialized handling to meet federal medical supply standards for distribution and safety. The solicitation is classified as a subcontract under NAICS code 323120, with responses due by August 4, 2026, and was posted on July 29, 2026, through the Department of Defense’s Medical Supply Chain MD Surg FSF.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

in about 12 hours

Military-Compliant Packaging and Marking ServicesThe contract requires specialized packaging, labeling, and marking services for cleaning cloths in full compliance with Defense Logistics Agency and military standards. Services must include proper palletization, application of special marking code 33-33, and adherence to bar-code compliance requirements to ensure traceability and readiness for military distribution. The work is to be performed at Quantico, Virginia, with a specified performance location of 22134-5061, and the North American Industry Classification System code is 323120, indicating a focus on printing and related support activities. This is classified as a subcontract under the Department of Defense, with the Defense Logistics Agency as the overseeing agency. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, allowing a 12-day window for submission. There is no set-aside designation specified, meaning the opportunity is open to all qualified vendors, regardless of size or status. The contract is accessible through the DIBBS platform via the provided UI link, and bidders must ensure strict alignment with all military specifications, particularly around labeling and marking, as non-compliance could result in rejection. No point of contact information is provided, suggesting that all inquiries should be directed through official DIBBS channels.

Defense Logistics Agency

POSTED

DEADLINE

MIL-STD-129 Marking & Labeling ServicesThe contract requires the design, printing, and application of durable labels compliant with MIL-STD-129 standards, ensuring all required military identification elements are accurately and permanently marked. This includes the National Stock Number, contract number, CAGE code, and any applicable special marking codes to support traceability and logistics processing across defense supply chains. The work must meet strict durability and readability requirements to endure harsh environmental conditions encountered during storage and transportation. This is a subcontract opportunity under the NAICS code 323120 for printing and related support activities, posted by the Department of Defense through its Construction & Equipment Manu & Con organization. Responses are due by August 10, 2026, and the performance location is not specified, implying potential nationwide or global application depending on contract award. Interested parties must submit proposals through the DIBBS portal prior to the deadline to be considered for award.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Medical Labeling and Barcoding ServicesThe contract requires the production and application of medical labels adhering to Medical Marking Standard No. 1, with strict compliance for barcodes, NSN identifiers, and specialized codes including 'ZZ'. All labeling must meet federal military specifications for accuracy, durability, and readability under operational conditions. The work involves full lifecycle label management from design and printing to application on medical supplies, ensuring traceability and inventory control across the Department of Defense supply chain. Compliance with established standards is mandatory, and all deliverables are subject to rigorous quality assurance checks prior to shipment. This subcontract is issued under NAICS code 323120 for printing and related support activities, with the place of performance located in Pascagoula, Mississippi, 39567. The opportunity was posted on July 29, 2026, and responses are due by August 5, 2026. The requesting agency is the Medical Supply Chain FSH under the Department of Defense, and the contract is structured as a non-set-aside subcontract, open to qualified vendors capable of meeting the technical and regulatory demands of defense medical labeling. Access to full solicitation details is available through the provided DIBBS link.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Print-on-Demand and Short-Run Specialty PrintingThe contract is for on-demand and short-run specialty printing services to support custom material production for events, reports, and signage, with services including finishing, binding, and large-format printing. It is structured as a subcontract under NAICS code 323120, issued by Sam Houston State University in Texas, and is open for responses until August 18, 2026, with a posted date of July 28, 2026. The solicitation is managed through the Texas SmartBuy portal, and no specific set-aside provisions or point of contact details are provided. Performance location and office address information are not specified, indicating flexibility in where the work may be completed as long as contractual deliverables are met.

Sam Houston State University

POSTED

DEADLINE

Sam Houston State University Printing and Mailing of Multiple Materials

Solicitation # 753-SHSU-2026-RFP-574-IMC

Sam Houston State University is soliciting qualified vendors to provide comprehensive printing and mailing services for a variety of institutional materials. The request for proposal, identified by solicitation number 753-SHSU-2026-RFP-574-IMC, was posted on July 28, 2026, with responses due by August 18, 2026. The procurement is open to all eligible providers without a specific set-aside classification and is managed under the state and local government procurement framework. All services must be performed within Texas, and vendors are expected to handle high-volume printing tasks alongside reliable mailing distribution for documents, publications, and other university communications. Primary point of contact for inquiries is Pamela Castaneda, reachable via email at pxc049@shsu.edu or by phone at 936-294-2620. Proposals must be submitted through the Texas SmartBuy portal, and vendors are encouraged to review all requirements thoroughly to ensure compliance with university standards and delivery expectations.

Sam Houston State University

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA

Same awarding agency

GABAPENTIN CAPSULES

Solicitation # SPE2DP-26-T-4457

GABAPENTIN CAPSULES, 100 MG in units of 100s, are procured under solicitation SPE2DP-26-T-4457 with a total requirement of 7,000 capsules across two line items, each with a 0% quantity variance. The item is regulated by the FDA and must comply with the DLA Master List of Technical and Quality Requirements, including shelf-life specifications of 36 months non-extendable for TYPE I (CODE Q) items. Packaging must meet Commercial standards and Medical Marking Standard No. 1, superseding MIL-STD-129, with all labeling and palletization aligned to RP001 and DLA packaging directives. Storage must maintain 25°C (77°F) with excursions permitted between 15°C to 30°C (59°F to 86°F) per USP Controlled Room Temperature. The material is not classified as hazardous under FED-STD-313 and must be commercially packaged in accordance with ASTM D3951, though DLA requirements override any conflicting standards. Delivery is FOB destination with a five-day lead time and inspection and acceptance occurring at the destination point. The items are to be shipped via traceable means, not parcel post, to the USS MAKIN ISLAND LHD 8 at FPO AP 96672, with a required delivery date of April 3, 2026. Manufacturers include MARLEX PHARMACEUTICALS INC, CIPLA USA INC, and SCIEGEN PHARMACEUTICALS INC, identified by their respective NDC codes. The unit of issue is BT (100s), with each unit pack containing one BT. All packaging and marking must reflect the correct NSN 6505013871892, and vendors must use the DLA VSM system for shipment tracking. Government use codes and contract identifiers are specified for administrative and logistical tracking, and all documentation must adhere to the latest DLA procedural notes for transportation, marking, and delivery verification.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

TOLNAFTATE POWDER, U

Solicitation # SPE2DP-26-T-4452

The contract specifies the procurement of Tolnaftate Powder, USP 1%, in 45-gram units, with a total quantity of 19 BT (each BT equaling 45 grams), supplied by Geri-Care Pharmaceuticals Corp. under part number NDC57896-0199-45 and NSN 6505014807897. Delivery is required within five days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The product must comply with strict packaging and marking standards, including Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and must be packed in sealed unit containers and commercial shipping containers ensuring safe transport at the lowest carrier rate. The item is classified as a TYPE I (CODE Q) medical product with a non-extendable shelf life of 36 months. All packaging and labeling must adhere to DLA requirements outlined in the Master List of Technical and Quality Requirements, and covered defense information protocols apply. The solicitation, issued under SPE2DP-26-T-4452 with a response deadline of August 10, 2026, is managed by the Department of Defense’s Medical Supply Chain Pharm FSA, with point of contact Imerah Burnett at Offutt AFB, and the unit of issue follows DoD authorization with corresponding ANSI X12 alignment.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

LIDOCAINE HYDROCHLORID

Solicitation # SPE2DP-26-T-4454

Lidocaine hydrochloride and dextrose injection in 500 mL premixed bags, containing 0.4% lidocaine and 5% dextrose, is being procured under solicitation SPE2DP-26-T-4454 with a unit of issue defined as a package of 18 bags. The item must meet stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, and packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129. At least 16 months of shelf life must remain at the time of delivery to the first government activity, as the product has a fixed 18-month non-extendable shelf life under Type I (Code K) requirements. The drug is regulated by the FDA, and contractors must ensure full compliance with all applicable federal standards for commercial packaging, including ASTM D3951 where applicable, though DLA requirements take precedence. The product is currently in limited supply due to manufacturing constraints, and only Baxter Healthcare Corp’s specific NDC 00338-0409-03 and part number 2B0973P are authorized. Delivery is required within five days of award, FOB destination, with zero variance permitted in quantity. The shipment must be sent via traceable and expedited means to the USS THEODORE ROOSEVELT CVN 71 at FPO AP 96632, using RDD 777 and VSM logistics protocols, and parcel post is strictly prohibited. Packaging must be palletized according to RP001 requirements and labeled in full compliance with DLA’s medical marking standards. The contract specifies a single purchase request quantity of one package, with a required delivery date of August 5, 2026, and procurement is managed by the Department of Defense’s Medical Supply Chain PHARM FSA. All bidders must provide detailed manufacturer and product information for FDA verification through EBS referral prior to award.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

SODIUM CHLORIDE IRRIGA

Solicitation # SPE2DP-26-T-4449

Sodium Chloride Irrigation, USP, is prescribed as a 0.9% solution in 250 mL plastic squeeze bottles, packaged 24 bottles per packing group, and must be stored at controlled room temperature of 25 degrees Celsius with protection from excessive heat. The product must comply with the DLA Master List of Technical and Quality Requirements, and its shelf life is fixed at 36 months without extension, classified as a Type I (Code Q) item. All packaging and labeling must adhere strictly to Medical Marking Standard No. 1, superseding MIL-STD-129, with documentation available via DLA Troop Support. Each unit must be sealed and protected from damage, and shipped in commercial exterior containers suitable for safe delivery by common carrier at the lowest cost to the designated destination. The item is identified by NSN 6505-01-253-8150 and NDC 00338-0048-02, supplied by Baxter Healthcare Corp, and is subject to a firm fixed price with zero variance allowed in quantity. Delivery is required FOB destination within five days of contract award, with inspection and acceptance occurring at the point of delivery. The contract is issued under solicitation SPE2DP-26-T-4449, with a response deadline of August 10, 2026, and falls under NAICS code 325412 for pharmaceutical preparation manufacturing. All data, including point of contact James Foggie and delivery location at Fort Bragg, NC, is governed by Federal procurement standards under the Department of Defense.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

BISMUTH SUBSALICYLA

Solicitation # SPE2DP-26-T-4459

The contract pertains to the procurement of Bismuth Subsalicylate Suspension, 262 mg per 15 mL, in 240 mL bottles, with a total order of two bottles. The item has a non-extendable shelf life of 24 months, and no more than 85 percent of that shelf life may have elapsed between the date of manufacture and the date of delivery to the government. Packaging must comply with commercial standards and meet the requirements of Medical Marking Standard No. 1, which supersedes MIL-STD-129; each unit must be sealed in a container that protects against damage, and all shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination. The product is regulated by the FDA and requires referral through EBS for confirmation by a product specialist, including full manufacturer and bidder details. Labeling, marking, and packaging must adhere strictly to the latest edition of Medical Marking Standard No. 1, accessible via the DLA website. Delivery is FOB destination within 20 days of contract award, with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. The item is identified by NSN 6505015056483, NDC 00536-1286-36, and is sourced from The Harvard Drug Group, L.L.C. under solicitation SPE2DP-26-T-4459, issued by the Department of Defense’s Medical Supply Chain PHARM FSA, with performance at Fort Drum, NY.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

ARTIFICIAL TEARS SOLUT

Solicitation # SPE2DP-26-T-4455

The contract specifies the procurement of 20 packages of Artificial Tears Solution, each package containing 30 single-dose vials of 0.3 mL, for a total of 600 vials. The item is regulated by the FDA and has a non-extendable shelf life of 24 months, adhering to RS001 for TYPE I (CODE M) items. Packaging must comply with the Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be hermetically sealed and protected against damage, packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest cost. The product, manufactured by Allergan Inc with NDC 00023-4554-30, must be labeled and marked per DLA specifications and is not considered hazardous under Fed-Std-313, requiring commercial packaging consistent with ASTM D3951 unless superseded by higher-priority DLA technical requirements. Delivery is FOB destination within five days of order, with zero tolerance for quantity variance, and must be shipped by traceable means—parcel post is prohibited. The shipment is destined for USS THEODORE ROOSEVELT CVN 71, FPO AP 96632, with a required delivery date of August 5, 2026, and must include all applicable DLA packaging and labeling standards including palletization per RP001. The contracting official must submit an EBS referral for FDA confirmation, including manufacturer and product details.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

LIDOCAINE HYDROCHLORID

Solicitation # SPE2DP-26-T-4451

This contract specifies the procurement of 2 units of Lidocaine Hydrochloride and Epinephrine Injection, USP, each unit containing 50 cartridges of 1.7 mL with a concentration of 2% Lidocaine Hydrochloride and a 1:100,000 ratio of Epinephrine. The product is designated for local dental anesthesia via nerve block or infiltration only, must be stored at controlled room temperature below 25°C, protected from light, and must not be permitted to freeze. The item is latex-free and regulated by the FDA. A minimum of 13 months of remaining shelf life is required upon receipt by the first government activity, with a total shelf life of 15 months that is non-extendable. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must be suitable for commercial shipping with protection against damage and breakage. Packaging must conform to ASTM D3951 unless otherwise overridden by DLA’s Master List of Technical and Quality Requirements, and hazardous material protocols under FED-STD-313 must be followed if applicable. Units are packed as 50 cartridges per unit of issue (PG), and palletization must meet DLA’s procurement packaging standards. Delivery is required FOB destination within 20 days of contract award to Joint Base Charleston, SC, and must be shipped via traceable logistics—parcel post is prohibited. The contract is issued under solicitation SPE2DP-26-T-4451 with a response deadline of August 10, 2026, and the item’s NSN is 6505-01-597-1328. Approved manufacturers include Henry Schein, Inc., Benco Dental Supply Co., and Darby Dental Supply, LLC, with specific part and NDC numbers listed. All documentation and labeling must strictly adhere to DLA requirements and FDA regulations.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

MAGNESIUM SULFATE

Solicitation # SPE2DP-26-T-4456

MAGNESIUM SULFATE 495MG/5GM oral granules in 454GM bags, sold in cases of 12 bags each, is procured under contract SPE2DP-26-T-4456 for delivery to the USS THEODORE ROOSEVELT CVN 71 at FPO AP 96632 with a five-day delivery window and no tolerance for quantity variance. The product is classified as a TYPE I (CODE Q) medical item with a non-extendable shelf life of 36 months and must comply with Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129. All packaging must meet commercial standards as specified in DLA’s procurement requirements, ensuring each unit is sealed in protective containers and packed in exterior shipping containers suitable for safe, low-cost transport by common carrier to the destination. Palletization and labeling must adhere to DLA’s Packaging Requirements for Procurement and the latest version of Medical Marking Standard No. 1, available through DLA Troop Support or their official website. The item is identified by NSN 6505-01-714-4975 and NDC 46122-0461-43, supplied by AMERISOURCEBERGEN DRUG CORP, and shipped via traceable methods only—parcel post is prohibited. Delivery is FOB destination with inspection and acceptance also occurring at the point of delivery, and the required delivery date is August 5, 2026.

Medicinal and Botanical Manufacturing

POSTED

about 12 hours ago

DEADLINE

CYCLOSPORINE OPHTHA

Solicitation # SPE2DP-26-T-4453

Cyclosporine Ophthalmic Ointment, 0.2% per gram, in a 3.5 gram sterile, preservative-free tube, is designated for veterinary use in managing keratoconjunctivitis sicca in dogs. The unit of issue is a package containing six tubes, and the product must be stored at controlled room temperature. It is subject to strict packaging standards per the latest Medical Marking Standard No. 1 and requires marking in accordance with MMS No. 1B dated 30 March 2017. The item has a non-extendable shelf life of 24 months under RS016 compliance. The product is supplied by multiple manufacturers including Merck Sharp & Dohme LLC, Patterson Veterinary Supply, Inc., and Penn Veterinary Supply Inc., each with their respective part numbers and NDC codes. This item is procured under the Department of Defense with NSN 6509-01-530-4765 and purchase request 7017723033, with a contract solicitation number SPE2DP-26-T-4453. Delivery is scheduled for 89 days after award, FOB destination, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must meet MIL-STD-2073-1E specifications, and defense information handling requirements apply. The point of contact for the solicitation is Shairy M. Cartagena at the Medical Supply Chain Pharm FSA under the DLA.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

WATER PURIFICATION TAB

Solicitation # SPE2DP-26-T-4448

The contract specifies the procurement of 200 units of water purification tablets containing stabilized chlorine dioxide, with no active chlorine or iodine, designed for military use in first aid kits. Each unit, designated as PG, contains ten individually sealed tablets and must meet a strict 60-month shelf life, with at least 51 months remaining upon delivery to the government. The product, identified by NSN 6850-01-530-3396 and part number 8014821 from KATADYN NORTH AMERICA INC., is subject to the Hazard Communication Standard as revised under OSHA’s alignment with the Globally Harmonized System, requiring suppliers to submit approved Safety Data Sheets and compliant labels prior to award, along with employee training on updated hazard communication protocols. Packaging must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and comply with MIL-STD-2073-1E for protective sealing and shipping containers suitable for common carrier transport at the lowest cost to the destination point of APO with ZIP 96260-5479. Delivery is required within 84 days FOB destination, with zero tolerance for quantity variance, and inspection and acceptance occur at the point of delivery. The item is classified as a TYPE I (CODE S) under shelf-life requirement RS001, which prohibits extension beyond the 60-month limit. All technical and quality requirements referenced are governed by the DLA Master List, and the solicitation number SPE2DP-26-T-4448 governs procurement terms under a federal acquisition vehicle.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

WATER FOR IRRIGATION, S

Solicitation # SPE2DP-26-T-4458

Water for Irrigation, Sterile, USP, is a sterile, distilled, nonpyrogenic solution intended exclusively for irrigation, washing, rinsing, and dilution purposes and is not for injection by any parenteral route. Each unit is a 1000 mL semi-rigid plastic container with a screw cap, available with or without a hanging device, and is packaged in cases of 12 units per package, the unit of issue. The product must be stored at controlled room temperature between 20°C and 25°C (68°F to 77°F), protected from freezing and excessive heat, and has a non-extendable shelf life of 36 months. It is regulated by the FDA and must be marked in compliance with the latest edition of Medical Marking Standard No. 1 and labeled according to MIL-STD-129. Packaging must adhere to DLA’s RP001 requirements and ASTM D3951 for non-hazardous materials, with DLA’s technical and quality requirements overriding any conflicting standards. The item is identified by NSN 6505-01-075-0679 and NDC 00338-0004-04, manufactured by Baxter Healthcare Corporation. The contract specifies delivery of two packages totaling 24 units, with delivery due within 20 days to two separate destinations: USS William P Lawrence DDG 110 and USS Zumwalt DDG 1000, FOB destination. Inspection and acceptance occur at the delivery point, with zero variance permitted in quantity. Shipping must use traceable transport methods, and parcel post is prohibited. All requirements, including those from the DLA Master List of Technical and Quality Requirements, must be strictly followed, and the solicitation, issued by the Department of Defense, has a response deadline of August 10, 2026, with a contract award anticipated in support of military medical supply needs.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

RINGER'S INJECTION, LAC

Solicitation # SPE2DP-26-T-4450

RINGER’S INJECTION, LACTATED, USP, 1000ML, in packs of 12 units per package, is procured under contract SPE2DP-26-T-4450 with a delivery requirement of 20 days FOB destination. The item is regulated by the FDA and requires prior confirmation by a product specialist through EBS referral, including full bidder and manufacturer details such as B. BRAUN MEDICAL INC, part number L7500, and NDC 00264-7750-00. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost. All packaging and labeling must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must be marked according to the latest edition of MMS NO. 1, accessible via DLA’s website. The product has a non-extendable shelf life of 30 months and must be stored at or near room temperature (25°C), with brief exposure to 40°C permitted without degradation. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The unit of issue is one package (PG), equal to 12 units, and the NSN is 6505013306267. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is to Gastonia, NC, and the contracting office is under the Department of Defense’s Medical Supply Chain.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE