Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Mercury-Containing Item Handling (If Applicable)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910
New
Theatre Mold Remediation Scope of Work
Solicitation # AT25-0006
Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was necessitated by a sprinkler system failure and requires the remediation of mold throughout the entire building, as well as the cleaning or replacement of damaged theater seating cushions. All work must be performed in accordance with ANSI/IICRC S520 standards, EPA guidelines, and OSHA regulations, with a specific requirement to achieve interior humidity levels of 50 percent or less. Key deliverables include the provision of a Certified Industrial Hygienist for verification and daily site visits, a detailed remediation plan featuring HEPA filtration and negative air pressure, and a final clearance walkthrough. The contract will be awarded based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Bidders must submit a single lump sum proposal on company letterhead, including a detailed cost breakdown, a timeline for substantial completion, and proof of a valid Indiana Contractor's License. Mandatory requirements include attendance at a site visit on October 27, 2026, and certification of compliance with Davis Bacon Act wage rates. The selected contractor must provide specific automobile and workers compensation insurance, naming Adams and Associates, Inc. as an additional insured. Work is expected to commence within 14 days of the Notice to Proceed, with payment issued on Net 30 terms.
Atterbury Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 12 days

AI Contract Overview

Show more

This contract pertains to the specialized handling, packaging, and documentation of items containing mercury, such as batteries or sensors, under applicable regulatory exceptions. It requires strict adherence to safety and compliance protocols to ensure proper management of hazardous materials during transportation and storage, with particular emphasis on avoiding environmental contamination and protecting personnel. The work is classified under NAICS code 562910, indicating waste management and remediation services, and is structured as a subcontract tied to the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, with performance obligations centered in Tracy, California, at ZIP code 95304-5000. The solicitation was posted on July 14, 2026, with a submission deadline of July 22, 2026, indicating a tight turnaround for interested parties to respond. While no set-aside type is specified, the contract is open to subcontractors capable of meeting the rigorous standards for mercury-containing item management. The requirement is not mandatory for all deliveries but applies only if mercury-containing items are used in the scope of work, making vendor awareness and readiness for exceptions critical. All documentation must align with federal and industry-specific hazardous material regulations, and failure to comply may result in rejection or penalties.

General Info

Subcontract for mercury-containing item handling, packaging, and documentation per hazardous material regulations in Tracy, CA.

NAICS

562910 - Remediation Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-26-T-288F.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GREASE, UTILITY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Special handling, packaging, and documentation for items containing mercury (e.g., batteries, sensors), if used under exception.

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 334512
New
DIBBS
THERMOMETER, INDICAT
Solicitation # SPE4A5-26-T-363Y
Solicitation SPE4A5-26-T-363Y is a procurement request by the Defense Logistics Agency Aviation for 23 units of indicating thermometers featuring capillary tubes and bulbs, identified by NSN 6685-01-376-11113. The contract specifies a need ship date of February 12, 2027, with an original required delivery date of March 3, 2027. Delivery is set as FOB Origin, with the final destination for both inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The procurement is categorized under NAICS code 334512 and incorporates specific quality and technical requirements, including the prohibition of mercury or mercury-containing compounds in preservation, packaging, and marking. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1E for packaging data and MIL-STD-129 for marking, including a special marking code for delicate instruments. Quality assurance will be conducted via destination inspection using sampling methods aligned with MIL-STD-1916 or ASQ H1331. Key regulatory clauses include the Buy American Act via DFARS 252.225-7036 Alternate IV and cybersecurity requirements under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-311V
The contract specifies the procurement of a wire rope assembly with part number 582-7006 and NSN 4010-01-618-1374, for a quantity of eight units, under solicitation SPE4A5-26-T-311V. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, with marking adhering to MIL-STD-129 and no special marking codes applied. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances required under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and shipment must be transported by the fastest traceable means, excluding parcel post, to the specified vessel shipment address at Port Hueneme, California. The item is designated for U.S. Marine Corps Underwater Construction Team 2, with a required delivery date of July 17, 2026, and the contract is governed by federal procurement rules under NAICS code 332618, issued by the Department of Defense’s ASC Supplier OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
BLOCK, NOZZLE
Solicitation # SPE4A5-26-T-440A
Solicitation SPE4A5-26-T-440A is a fixed-price contract issued by the Defense Logistics Agency for the procurement of 15 nozzle blocks, identified by NSN 1650-01-052-8065 and part number A21271-1. The requirement is managed by the ASC Supplier Oper OEM Division under NAICS code 336413. The need ship date is March 16, 2027, with an original required delivery date of November 14, 2027. Delivery is specified as FOB Origin, with the final destination being the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, with specific requirements for bare item marking and the removal of government identification from non-accepted supplies. Inspection and acceptance will occur at the destination, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. Compliance requirements include a CMMC Level 2 self-assessment and adherence to the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The solicitation requires offerors to provide CAGE codes and represent their size status, with a non-manufacturer size standard of 500 employees for applicable set-asides.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
MULTIPLEXER SUBASSE
Solicitation # SPE4A5-26-T-319Z
Solicitation SPE4A5-26-T-319Z is an automated simplified acquisition issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of five Multiplexer Subassemblies, identified by NSN 5895014264389 and part number 16E4004-809. The hardware is associated with manufacturers Centroid, Inc., Lockheed Martin Corporation, and Interconnect Wiring LLP. The required delivery date is September 27, 2027, with a delivery window of 411 days after the date of order. Shipping is designated as FOB Origin, with the final destination for both inspection and acceptance located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program (DFARS 252.225-7001) and safeguarding covered defense information per DFARS 252.204-7012. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS), and electronic invoicing must be processed via the Wide Area WorkFlow (WAWF) system. This procurement is not a small business set-aside.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in about 9 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS