Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Metal Casting and Fabrication of Sleeve Spacers

Open

Federal

Response Deadline11/13/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the metal casting and final machining of six sleeve spacers under NSN 5365-01-453-3143 for the DLA Weapons Support ASC. All work must strictly adhere to drawing 80020 427860 Revision C, and the use of additive manufacturing is explicitly prohibited. The project is managed under NAICS code 332510 and will be performed in Tracy, California. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with ITAR/EAR regulations and DFARS 252.204-7012 cybersecurity standards. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

General Info

Metal casting and machining of six sleeve spacers for DLA Weapons Support ASC.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332510 - Hardware Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-3229.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPACER, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 AM PSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs metal casting and final machining of sleeve spacers for prime contractors on DLA Weapons Support ASC projects. Casts and machines six parts per drawing 80020 427860 Revision C; additive manufacturing is prohibited. Requires SAE AS9003 or ISO 9001 quality systems, ITAR/EAR compliance, and DFARS 252.204-7012 cybersecurity standards. Delivers six finished sleeve spacers (NSN 5365-01-453-3143).

Similar Contracts

Same NAICS industry code

Surface Plate Casting and ProductionThis subcontract for the Defense Logistics Agency involves the manufacture of a single finished surface plate for prime contractors. The scope of work includes metal casting and the development of specific tooling required to produce the component. All items must be packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The project is categorized under NAICS code 332510 and will be performed in Johnston, Iowa. To be eligible, the contractor must maintain NIST SP 800-171 compliance and complete a CMMC Level 2 Self-Assessment. Responses to the solicitation are due by November 16, 2026.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Loop Clamp Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 32 loop clamps, part number 7019031310, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet strict technical specifications and adhere to specific military standards for marking, palletization, and packaging, specifically MIL-STD-129, RP001, and MIL-STD-2073-1E. Additionally, any hazardous items must be labeled in accordance with the Hazard Communication Standard 29 CFR 1910.1200. The final deliverables must be shipped to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This procurement falls under NAICS code 332510 and is managed under the Department of Defense. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Hinge Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of five hinge assembly units, identified by NSN 5340014718518, for prime contractors under the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider must manufacture the hardware according to strict technical specifications, utilizing MIL-STD-1916 for sampling and quality inspection, while adhering to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Performance of the contract will take place in San Diego, California. To be eligible, the contractor must maintain ISO 9001:2015 certification and ensure CMMC Level 2 compliance. Additionally, the submission of Source Approval Request documentation is required. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Wire Strand Band (P/N 79/15VZ)This subcontract involves the supply of a high-precision wire strand band, part number 79/15VZ manufactured by Lex Products, LLC, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to military standards, specifically MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The contract specifies the delivery of one unit on a FOB Origin basis with a required delivery timeframe of five days. Performance is associated with NAICS code 332510 and is centered in Tampa, Florida, under the oversight of the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Machine Bolts (NSN 5306991144430)This subcontract involves the supply of 38 units of machine bolts, identified by NSN 5306991144430, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier must ensure all units meet specific material specifications and adhere to strict packaging and labeling standards, including ASTM D3951, MIL-STD-129, and RP001 DLA Packaging Requirements. Additionally, the contractor is required to comply with all DPAS rating requirements to ensure prioritized delivery. The completed order is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma located at Tinker AFB. This procurement falls under NAICS code 332510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Straight Headed Pins (NSN 5315-0119-17595)This subcontract involves the manufacture of straight headed pins under NSN 5315-0119-17595 for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected contractor must utilize precision machining and forming equipment to fabricate the pins and ensure strict adherence to quality control and sampling standards per MIL-STD-1916 or ASQ H1331. Compliance with the Buy American Act is mandatory, and the provider must hold either SAE AS9003 or ISO 9001 certification. The scope of work requires the delivery of five finished pins FOB Origin to the DLA Distribution DDSP New Cumberland Facility. This opportunity falls under NAICS code 332510 and was posted by the DLA Weapons Support ASC Supplier OEM Division. Interested parties must submit their responses by November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

Loop Clamp SupplierThis subcontract involves the supply of loop clamps for prime contractors working on DLA Weapons Support ASC projects under the Department of Defense. The selected supplier is responsible for manufacturing or sourcing a specific loop clamp, NSN 5340-01-612-5776, ensuring it adheres to the DLA Master List of Technical and Quality Requirements. All items must be packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The contract requires the delivery of the completed hardware components to the designated destination point within 20 days of the award. Performance will take place in Lenoir, North Carolina, under NAICS code 332510. Interested parties must respond by the deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

Mounting Bracket Fabrication (NSN 5340-01-386784-1)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the fabrication and supply of 28 mounting brackets identified as NSN 5340-01-386784-1. The project involves utilizing casting and forging processes with specialized tooling to produce units that meet Critical Application Item quality standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside. A critical requirement for the contractor is strict compliance with NIST SP 800-171 standards to ensure the proper safeguarding of covered defense information. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Supply of Butt Hinges (NSN 5340-01-710-4966)This subcontract involves the supply of 8 units of butt hinges, part number 148T8221U7, to support prime contractors under DLA supply contracts. The parts must be sourced according to Boeing specifications and undergo sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor is required to maintain SAE AS9100 quality standards and possess FAA Airworthiness Approval. The final delivery of the marked and packaged units is designated as FOB Origin, with the destination being DLA Distribution DDSP New Cumberland. This procurement is managed by the DLA Weapons Support Land Supply Chain under the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Needle Roller Bearing SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the delivery of 20 specialized needle roller bearings, identified by NSN 3110-01-248-7841. The bearings must be manufactured in the United States, its outlying areas, or Canada to comply with specific restrictions on the acquisition of ball and roller bearings. All components must adhere to the technical and test requirements outlined in the associated technical drawings. The contractor is required to maintain compliance with CMMC Level 2 and CDI requirements. This procurement falls under NAICS code 332510 and supports prime contractors fulfilling DLA supply contracts. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Supply of Solid Rivets (NSN 5320-01-057-3176)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Access Door Hinge SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the supply of 14 specialized access door hinges identified by NSN 5340-01-485-6825. The contractor is responsible for manufacturing or sourcing these components, with the possibility of utilizing additive manufacturing provided that ESA approval is obtained. All deliverables must be packaged according to ASTM D3951 standards for non-hazardous materials and palletized following RP001 guidelines. The place of performance for this contract is located in Cherry Point, and the procurement falls under NAICS code 332510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Ring Spacer Manufacturing & SupplyThis subcontract involves the fabrication and supply of eight metal ring spacers, identified by NSN 5365015427934, for prime contractors supporting the Department of Defense. The project is managed under the DLA Weapons Support ASC Supplier Oper AE and AF Div and requires strict adherence to military standards for quality assurance, including sampling per MIL-STD-1916 or ASQ H1331. Additionally, the contractor must ensure all items are marked according to MIL-STD-129 and packed and palletized in compliance with MIL-STD-2073-1E and RP001. The contractor is required to comply with the Hazard Communication Standard 29 CFR 1910.1200 throughout the manufacturing process. Final delivery of the units is designated as FOB Origin to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. The contract falls under NAICS code 332999, with a response deadline set for November 13, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Precision Aerospace Component Manufacturing - Structural Aircraft FittingThis subcontract involves the precision CNC machining of a structural aircraft fitting, specifically part number 140T2907-17, for the Department of Defense under the DLA Weapons Support ASC. The manufacturing process must strictly adhere to TDP Rev A Gen 1 and Reference QAP 13873. The final deliverable consists of one finished fitting accompanied by all necessary airworthiness certifications and comprehensive documentation. To qualify for this project, the manufacturer must maintain ISO 9001:2015 certification and FAA Airworthiness Approval. Additionally, the contractor is required to ensure full supply chain traceability in compliance with DLA Directive C03. Performance for this contract will take place in New Cumberland, Pennsylvania.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Bushing Blank Manufacturing and SupplyThis subcontract involves the manufacture and supply of 70 bushing blanks for prime contractors supporting DLA Weapons Support projects. The contractor must produce these units according to specific technical data, ensuring that no additive manufacturing processes are used and that all items are free of mercury. Deliveries are to be made to the DDSP New Cumberland Facility, with packaging strictly adhering to MIL-STD-2073-1E and MIL-STD-129 standards. To qualify, the provider must maintain a quality management system certified to SAE AS9003 or ISO 9001 and meet CMMC Level 2 cybersecurity requirements. Additionally, the contractor must comply with the US/Canada Joint Certification Program for export control. The project falls under NAICS code 332999 and is managed by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Aircraft Structural Plate Manufacturer/SupplierThis subcontract involves the manufacture and supply of eight structural aircraft plates meeting NSN 1560-00-328-4992 specifications for prime contractors under DLA Distribution supply contracts. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland. The supplier is responsible for sourcing or manufacturing the plates and ensuring all hazardous materials are packaged according to TQ requirement IP025. Additionally, all packaging and labeling must strictly adhere to MIL-STD-129 standards. Delivery of the units is required on a FOB Origin basis.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Aerospace Dimensional Inspection and FAT ValidationThis subcontract opportunity, titled Aerospace Dimensional Inspection and FAT Validation, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing dimensional verification and quality assurance services for prime contractors, specifically focusing on the validation of First Article Tests and production lots. Work is performed at Tinker AFB and requires the use of CMM or optical comparators to ensure compliance with ASME Y14.31 and MIL-STD-1916 standards, including the verification of Digital Mylar data and grid unit tolerances. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380. To be eligible, providers must maintain ISO 9001:2015 certification and are responsible for delivering detailed inspection reports and certifications of conformance. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Supply of Aerospace Structural Alloy StockThis subcontract involves the supply of aerospace-grade structural alloy plate stock for prime contractors supporting DLA Weapons Support ASC projects. The raw materials must strictly adhere to the specifications outlined in Drawing NR 81205 4-3904 and require full material traceability along with Mill Test Reports to maintain compliance with rigorous aerospace standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413 for the Department of Defense. Performance will take place at Tinker AFB, with a response deadline set for November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Precision Machining of Structural Aircraft PlatesThis subcontract involves the precision fabrication of 15 structural aircraft plates for prime contractors supporting DLA Weapons Support ASC projects. The work requires the use of CNC equipment to machine parts according to Drawing NR 81205 4-3904 and ASME Y14.31 standards, maintaining strict tolerances between 0.005 and 0.014 inches. Additionally, the contractor must perform bare item marking per RQ017 and complete a First Article Test to ensure quality compliance. The project is a total small business set-aside under NAICS code 336413, with performance taking place at Tinker AFB. To be eligible, the provider must hold ISO 9001:2015 and CMMC Level 2 certifications. The contract was posted on November 6, 2026, with a response deadline of November 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of non-hazardous materials according to ASTM D3951 and the marking of all packaging in compliance with MIL-STD-129. Additionally, the provider must execute palletization following RP001 DLA Packaging Requirements and ensure all hazardous materials meet TQ Requirement IP025. The final deliverables must be shipment ready for FOB Origin transport to the DDSP in New Cumberland. This effort falls under NAICS code 488510 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The response deadline for this opportunity is November 13, 2026.

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Troop Compartment Speaker BezelsThis subcontract involves the manufacturing of precision troop compartment speaker bezels for the DLA Weapons Support ASC. The contractor is responsible for fabricating components in accordance with Basic Drawing NR 98897 4E20059 Revision C and TDP Rev A Gen 3. The final deliverables include six finished bezels under NSN 1560-00-373-6353 and two units dedicated to First Article Testing to be delivered to Robins AFB in Georgia. To qualify for this project, the provider must maintain ISO 9001:2015 certification and ensure full compliance with ITAR and EAR regulations. The work is categorized under NAICS code 336413 and is performed for the Department of Defense. Performance of the contract is centered in New Cumberland, Pennsylvania.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Aircraft Components

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Aircraft Structural Chassis Fabrication (P/N F1469579)

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Grooved Clamp Couplings (P/N BACC10DU350ABE)This subcontract involves the manufacture or procurement of 57 grooved clamp couplings, part number BACC10DU350ABE, for prime contractors supporting DLA Weapons Support ASC projects. The components must be produced in accordance with drawings BACC10DU REV AD and 81205 BACC10DU Revision AE, with final delivery designated for Tinker AFB. Strict adherence to packaging and palletization standards is required, specifically ASTM D3951, MIL-STD-129, and RP001. To ensure quality and regulatory compliance, the provider must maintain SAE AS9100 and ISO 9001:2015 certifications. Additionally, the contractor must be part of the US/Canada Joint Certification Program to satisfy ITAR and EAR requirements. This effort falls under NAICS code 336413 and is managed by the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Solid Rivets (NSN 5320-01-353-9570)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Helical Compression Spring Seats

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Precision Shim (NSN 5365-01-521-7826) Supplier

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Headless Straight Pins (PN 711169GD)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Helical Compression Springs (NSN 5360-01-467-2944)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Supply of Self-Locking Plate Nuts (NSN 5310-01-445-6092)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Buckle (NSN 5340-01-664-6083)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Manufacture of Leaf Strap Hinges (MIL-DTL-85731/1C)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

10-Inch Valve Assembly Supplier

POSTED

about 9 hours ago

DEADLINE

Precision Ball Bearing Manufacturer/Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Helical Compression Seat Springs (NSN 5340-01-220-4198)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Spacer Plate Manufacturing and Supply

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS