Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Metal Casting Manufacturing

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the manufacture of 285 units of a metal cast component identified by part number 11683943-1, encompassing all stages from tooling development through casting, finishing, and final inspection, all in strict compliance with military specifications. The work requires adherence to rigorous quality standards and is intended for delivery to a military performance location in Anniston, Alabama, with the zip code 36201-4199. The procurement is classified as a subcontract under the NAICS code 332111, which corresponds to foundries, and is being managed by the Department of Defense through its Land Supply Chain organization. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, indicating a tight turnaround for interested parties to submit proposals. The contract focuses on precision metal casting capabilities, and successful bidders must demonstrate experience in meeting defense-related requirements for durability, dimensional accuracy, and inspection protocols.

General Info

Manufacture 285 metal cast components per military specs for Anniston, Alabama delivery under DoD subcontract.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

ANNISTON, AL, 36201-4199, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 285 units of a metal cast component (P/N 11683943-1), including tooling, casting, finishing, and inspection to military specifications.

Similar Contracts

Same NAICS industry code

Precision Metal Stamping and FabricationThe contract requires the manufacture of a metal access cover using precision stamping, forming, and finishing processes to fully comply with military specifications. All aspects of production including material sourcing, tooling development, and quality control must adhere to stringent defense standards, ensuring durability, dimensional accuracy, and environmental resilience. The work demands a high level of technical expertise in metal fabrication and rigorous adherence to inspection protocols to guarantee conformance under operational conditions. Performance is required at Tracy, California, with a response deadline of August 10, 2026, and the solicitation was posted on July 30, 2026. This is a subcontract under the NAICS code 332111 for Metal Stampings, and it is administered by the Department of Defense through the Land Supply Chain organization. Participation is open to qualified subcontractors capable of meeting all technical and regulatory requirements without a specific set-aside designation. The contract is accessible via the DIBBS portal for potential bidders seeking detailed technical and procedural requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Metal Casting and Machining of Nozzle AssemblyThe contract entails the manufacture of 163 precision lubrication nozzle assemblies to strict military technical drawings TDP Rev A Gen 1, requiring advanced metal casting and machining capabilities aligned with defense quality standards. All components must meet exacting dimensional and material specifications to ensure operational reliability in high-stress military environments, with production occurring at the designated place of performance in Anniston, Alabama, under the oversight of the Department of Defense’s Land Supplier Operations Engines. The work is structured as a subcontract under NAICS code 332111, indicating a focus on foundry operations and precision metal component production. Bidders must submit proposals by the deadline of August 10, 2026, with the request for quotation issued on July 30, 2026. Compliance with all defense-grade quality controls, traceability protocols, and documentation requirements is mandatory, and successful offerors are expected to demonstrate proven experience in similar defense-related casting and machining tasks. While no specific set-aside designation is indicated, the contract is accessible to qualified entities capable of fulfilling the technical and regulatory demands of a DoD supply chain, with further details available through the official DIBBS platform link.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Raw Materials and Components for Brake AssemblyThe contract calls for the supply of critical raw materials and sub-components including friction materials, steel forgings, hydraulic fittings, and commercial off-the-shelf parts to support the production of military-grade brake kits. All delivered items must adhere to strict traceability and certification requirements to ensure full compliance with defense manufacturing standards, with documentation verifying material origin, lot numbers, and quality assurance throughout the supply chain. The scope is focused exclusively on materials and components essential to the assembly process, with no provision for finished goods or final assembly work. The solicitation, issued under NAICS code 332111 for Forging and Stamping, is a subcontract opportunity posted by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with performance required at the facility located in New Cumberland, Pennsylvania, 17070-5002. Bidders must submit responses by August 7, 2026, and the contract will support defense production needs through a supply chain that demands rigorous material accountability, adherence to military specifications, and consistent quality control to meet mission-critical operational demands.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Metal Casting and Machining of Housing AssemblyThe contract calls for the manufacture of a housing assembly through metal casting and precision machining processes, adhering strictly to military specifications and quality standards. The work is defined under NAICS code 332111, indicating classification as a metal casting manufacturing subcontract, and the place of performance is fixed at Tracy, California, with a ZIP code of 95304-5000. The solicitation was posted on July 30, 2026, with a hard deadline for responses set for August 10, 2026, and is issued under the Land Supply Chain division of the Department of Defense. This subcontract does not include any set-aside provisions and is intended for qualified vendors capable of delivering components that meet rigorous defense requirements. All work must be completed in compliance with the applicable technical and quality controls mandated for military-grade hardware, with no designated point of contact provided in the posting. The full details and submission portal can be accessed via the DIBBS system using the provided online link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Forged Quick Release Pin ManufacturingOne unit of a forged Quick Release Pin is to be manufactured in strict accordance with MIL-DTL-45952A, encompassing all required material, dimensional, and mechanical specifications to ensure full compliance with military standards. The forging process must meet exacting quality controls to guarantee structural integrity, durability, and performance under operational conditions, with all finished product characteristics aligned to the referenced military specification. This subcontract opportunity is issued by the ASC COMMODITIES DIVISION under the Department of Defense, with a solicitation posted on July 30, 2026, and a firm response deadline of August 7, 2026. The North American Industry Classification System code 332111 identifies the work as forging and stamping, and the place of performance and point of contact details are unspecified, requiring bidders to review the official DIBBS portal for full submission instructions and technical requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machining of Military-Grade Sleeve BushingThe contract requires the manufacture of a precision sleeve bushing in full compliance with military specifications and DLA technical requirements, emphasizing stringent quality control and full traceability throughout production. The work must adhere to exacting military drawing standards, ensuring dimensional accuracy, material integrity, and performance under demanding operational conditions. All processes, materials, and inspections must be documented to meet defense-grade accountability protocols, with nonconformances subject to immediate corrective action and reporting. The solicitation is issued as a subcontract under NAICS code 332111, with a response deadline of August 7, 2026, and performance to be conducted at the facility in Lincoln, Nebraska, with a zip code of 68508-1048. The contracting activity falls under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and procurement is managed through the DIBBS system. While no set-aside provisions are specified, bidders must be prepared to demonstrate capability in high-precision machining, compliance with defense quality systems, and the ability to maintain full lot traceability from raw material through final inspection.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Forging of Steel CAM ComponentThe contract involves the precision forging of a steel CAM control component featuring first and second stator elements using closed-die forging techniques, requiring specialized tooling and strict compliance with tight geometric tolerances to meet performance specifications. This is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, with the North American Industry Classification System code 332111 indicating it falls under Forging and Stamping. The work must be performed at the designated location in Anniston, Alabama, with a zip code of 36201-4199, and all manufacturing processes must adhere to exacting standards to ensure dimensional accuracy and structural integrity of the critical aerospace or defense-related component. Bidders must submit proposals by the deadline of August 10, 2026, at 5:00 PM, following the solicitation issued on July 30, 2026, under the Department of Defense’s Land Supply Chain organization. Although specific point of contact details are not provided, interested parties can access the full solicitation details via the online DIBBS portal. The requirement for dedicated tooling underscores the complexity and uniqueness of the component, necessitating proven expertise in high-precision steel forging and experience in meeting DoD quality and delivery standards. No set-aside exceptions beyond the SDVOSBC designation apply, and all proposals must demonstrate capability, capacity, and compliance with the technical and regulatory expectations of the defense supply chain.

LAND SUPPLY CHAIN

POSTED

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-10VB

The contract is for the procurement of 24 bushings, sleeves, identified by NSN 3120-01-429-5820 and part number 12364519, with a unit price of $24.00 per unit and a total contract value of $576.00. Delivery is required within 136 days, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containers, and marking must adhere to MIL-STD-129 with no special marking applied. Palletization and packaging requirements follow DLA’s official guidelines. The item is subject to strict sourcing restrictions under DFARS 252.225-7016, mandating that all ball or roller bearings used in the component be manufactured in the United States, its outlying areas, or Canada, with more than 50% of the total component cost originating from these locations. A contractor’s declaration documenting compliance is mandatory and must be submitted upon request; failure to provide it may disqualify the offer. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise specified, and all Class 3A and 3B threads must be gaged per SAE AS8879 or MIL-S-7742, excluding small self-locking nuts and undersized threads. The solicitation number is SPE4A6-26-T-10VB, with a response deadline of August 7, 2026, and delivery must be completed by December 22, 2026. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Vehicular Door Hinge Supply (Forged, Tan)The contract calls for the supply of five forged vehicular door hinges, each finished in tan and compliant with military specifications and the National Stock Number 2510-01-568-1725, with a potential value extending up to $350,000. This is a subcontract under the Department of Defense, specifically managed by LSO Combat Vehicles and Armament, and falls under the NAICS code 332111 for forged steel product manufacturing. The solicitation was posted on July 29, 2026, with responses required by August 13, 2026, and performance is expected to meet exacting military standards without specifying a precise location for delivery. No set-aside designation or point of contact details are provided, but the official bid window and procurement link are accessible through the DIBBS system.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Flat Washers (PG Unit)The contract solicits the supply of flat washers packaged in quantities of 125 pieces per pack, designated for use under federal supply classification, primarily in mechanical or defense equipment assembly contexts. The requirement is issued under the NAICS code 332111, indicating a focus on forged steel and nonferrous forging operations, aligning with the production of precision mechanical components for military applications. The offeror must deliver goods to Fort Stewart, Georgia, with the specified zip code, ensuring compliance with military logistics and packaging standards. Subcontractors are invited to respond by the deadline of August 6, 2026, with the opportunity arising from the Aviation Supply Chain ESOC Buys division under the Department of Defense. There is no set-aside designation defined for this procurement, making it open to qualified suppliers without restrictions based on business size or status. The posting date was July 29, 2026, indicating a seven-day window for proposal submissions, and all bids must meet the technical and logistical requirements for delivery to the designated performance location without additional details provided regarding inspection, testing, or certification beyond the package specification.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE8E4-26-T-1898

This contract specifies the procurement of carbon steel structural angles conforming to ASTM A6 Table A2.8 for unequal legs, with an overall height of 3.000 inches, an overall width of 3.500 inches, and a flange thickness of 0.375 inches. The material must be supplied in lengths ranging from 30 to 40 feet, with a reference weight of 7.90 pounds per foot, and must be delivered in whole-foot increments only. Compliance with ASTM A36/A36M-19 and ASTM A6/A6M-24B is mandatory, and each unit must carry continuous identification markings including the DLA contract number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material, and adhesive labels are required for smaller profiles under 0.250 inches nominal OD. A Certificate of Quality Compliance, or mill material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. This solicitation enforces strict adherence to the Qualified Suppliers List for Distributors (QSLD), mandating that only suppliers listed on the QSLD are eligible to submit bids. Any deviation from this requirement must be explicitly declared, and non-compliant products will be treated as unauthorized substitutions with potential criminal penalties. Packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129R, with special codes Z and ZZ as defined in ASTM A700. The delivery requirement is for 188 feet of material to be delivered FOB origin to the DLA distribution center in Tracy, California, with a 167-day lead time and a 10% variance allowed on quantity. Inspection and acceptance occur at destination. The contract incorporates detailed technical and quality requirements identified by R and I numbers from the DLA Master List, and all documentation must align with the revisions in effect as of the solicitation issue date. The procurement is governed by the DLA Troop Support QSL program, and references to source inspection, COQC, PVT, QAP-EQ003, and ASQ H1331 do not apply for approved QSLD suppliers unless specifically noted.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Precision Metal Casting and MachiningThe contract calls for the manufacture of a remote control lever using metal casting and precision machining techniques to comply with military specifications, ensuring dimensional accuracy, structural integrity, and performance under demanding operational conditions. The final product must be finished to accept CARC coating, a specialized camouflage and corrosion-resistant finish required for military equipment, necessitating surface preparation and coating compatibility standards. The work is subcontracted under the NAICS code 332111 for Metal foundries and is tied to a U.S. Department of Defense procurement through the LAND SUPPLY CHAIN organization, with performance required at Cherry Point, North Carolina, ZIP 28533-5040. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, indicating a tight turnaround for qualified suppliers to submit proposals. The contract is structured as a subcontract, suggesting the prime contractor is managing integration into a larger defense system. There is no set-aside designation specified, meaning all eligible vendors may compete regardless of size or ownership status. The place of performance being a known military installation reinforces the critical nature of the component for defense applications, requiring strict adherence to quality control, traceability, and delivery timelines to support operational readiness.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Small Business Subcontracting Plan ImplementationThe contract requires support to the prime contractor in fulfilling small business utilization objectives under the Federal Acquisition Regulation provisions FAR 52.219-9 and FAR 52.219-16, which mandate the development and execution of a small business subcontracting plan. This includes performing outreach to small businesses, identifying and securing qualified subcontractors, and ensuring compliance with reporting requirements to demonstrate progress toward established goals. The effort is centered on facilitating meaningful participation of small businesses in the performance of work under the prime contract, with a focus on active engagement and transparent documentation throughout the contract lifecycle. The solicitation is associated with NAICS code 541611, which pertains to management consulting services, and is managed by the Department of Defense through the Land Supply Chain office. The response deadline is August 31, 2026, with the opportunity posted on July 31, 2026. Performance location and point of contact details are not specified, but the work is intended to support defense-related procurement activities. The type of set aside is not indicated, and the contract is structured as a subcontracting support engagement rather than a direct award. All activities must align with federal small business contracting policy and timelines to ensure compliance and accountability.

Administrative Management and General Management Consulting Services

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Cybersecurity Compliance and Incident Response SupportThe contract provides ongoing support for maintaining compliance with NIST SP 800-171 requirements, managing cyber incident reporting procedures, ensuring proper preservation of controlled unclassified information on media, and overseeing subcontractors to ensure adherence to DFARS 252.204-7012. This support is essential for safeguarding sensitive defense information throughout the supply chain and must be delivered in alignment with all applicable federal cybersecurity standards. The work involves continuous monitoring, documentation, and response capabilities to address potential threats and ensure regulatory compliance across all layers of the contract structure. This is a subcontract under the Department of Defense, classified under NAICS code 541512 for computer systems design services, with a submission deadline of August 31, 2026. Performance location and specific agency office details are not specified, but the scope centers on safeguarding controlled unclassified information in alignment with federal mandates. The requirement applies to any subcontractor handling or processing covered defense information, and the contractor must demonstrate established processes for incident detection, reporting, media handling, and vendor compliance enforcement. All activities must be conducted with strict attention to accountability, traceability, and timely response to cybersecurity events as defined by DoD regulations.

Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Product Verification Testing (PVT) SupportThe contract supports government-conducted Product Verification Testing by providing comprehensive assistance in sample preparation, documentation, and coordination with Defense Logistics Agency testing laboratories, as specified in Section E05. This subcontract is focused on ensuring that all testing procedures align with federal standards and that logistical and administrative tasks are executed accurately to facilitate timely and reliable verification outcomes. The work involves close collaboration with DLA labs to meet technical requirements and maintain traceability throughout the testing lifecycle. The solicitation is posted under NAICS code 541380 and is managed by the Land Supply Chain within the Department of Defense. The opportunity is open for responses until August 31, 2026, with no specific set-aside categories or organization type restrictions indicated. Performance locations are not explicitly defined, but the work centers around DLA testing facilities and requires active coordination with government personnel. Interested parties can access further details through the official DIBBS portal linked in the contract data.

Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for chain assemblies in strict accordance with Defense Logistics Agency standards. This includes the application of accurate barcoding for inventory tracking and full compliance with hazardous communication regulations to ensure safe handling and transport. All work must meet the stringent requirements for military-grade documentation, material protection, and labeling procedures to support logistics and operational readiness. The scope encompasses the full lifecycle preparation of chain assemblies from packaging through final marking, ensuring they are ready for deployment under Department of Defense protocols. This is a subcontract under the NAICS code 493190, issued by the Land Supply Chain division of the Department of Defense, with a response deadline of August 31, 2026. The performance location is not specified, but adherence to federal military logistics standards is mandatory. The solicitation is accessible via the DIBBS platform, and all submissions must comply with the detailed technical and regulatory expectations outlined by DLA without deviation. No set-aside provisions are indicated, meaning the opportunity is open to all qualified subcontractors capable of meeting the military compliance requirements.

Other Warehousing and Storage

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Manufacturing of Chain Assembly, Tire (NSN 2540-12-417-2097)The contract entails the full-scale production of 541 or more units of a specialized chain assembly designed for tire applications, with the National Stock Number 2540-12-417-2097. All phases of manufacturing including material sourcing, fabrication, assembly, inspection, and packaging must adhere strictly to Defense Logistics Agency standards to ensure quality, consistency, and compliance with military specifications. The work is classified as a subcontract under NAICS code 332439, indicating it falls under Other Fabricated Metal Product Manufacturing, and is managed by the Land Supply Chain under the Department of Defense. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, and performance is expected to be carried out in accordance with DLA requirements, though the specific location of performance is not detailed. The contract does not specify a set-aside type or designated small business preferences, and no point of contact information is provided in the public details.

Other Metal Container Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month

PLATE, MOUNTING

Solicitation # SPE7L1-26-Q-1419

The contract specifies the procurement of 292 mounting plates identified by NSN 5340-01-578-1311 under solicitation SPE7L1-26-Q-1419, with delivery required within 104 days after award and a firm fixed price structure with no tolerance for quantity variation. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, and compliance with MIL-STD-130N for identification marking of military property is mandatory. The item must adhere to stringent packaging standards outlined in DLA’s RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and TQ requirement IP025 while non-hazardous materials must comply with ASTM D3951 under DLA’s overarching authority. Ozone-depleting chemicals are strictly prohibited, and any alternative substances require prior approval unless explicitly authorized by the specification. The product must be sourced from qualified manufacturers listed on approved QPLs or QMLs as referenced in the associated technical documentation, and manufacturing must meet ISO 9001:2015 quality management standards. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. The item is subject to configuration change management procedures and covered defense information controls, and all packaging must be labeled and palletized per DLA guidelines. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract mandates full and open competition and applies to a Federal procurement with a NAICS code of 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

CAP, PROTECTIVE, DUST AN

Solicitation # SPE7L1-26-Q-1420

The contract calls for the procurement of 47 protective dust and moisture seal caps with NSN 5340-01-684-3897, supplied by PALL AEROPOWER CORPORATION under part number 62RB114S0000, in compliance with stringent technical and quality requirements referenced from the DLA Master List and specific DLA directives including retention of supply chain traceability documentation per Procurement Note C03. The item is classified as a critical application requiring FAA airworthiness approval, with adherence to Drawing 13873 Rev 016843897 and Quality Assurance Provision 13873, and must meet sampling standards under MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified. Packaging, preservation, and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with each unit labeled with the NSN, contract number, lot number, contractor and manufacturer Cage codes, and part number, palletized per DLA packaging requirements. The contract is a firm fixed price with no variance allowed in quantity, and delivery is required within 37 days afteraward date to the DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance occur at destination, and all documentation and traceability must be maintained by the contractor as mandated by DLA directives.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-823H

This contract specifies the procurement of an O-RING with part number KRP203321V-ORING and NSN 5331016878523, requiring a quantity of 176 units to be delivered FOB origin within 44 days of award. The item is classified as a Type I shelf-life item with a non-extendable lifespan of 180 months, governed by RS039 and identified by special marking code 32. All packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the product is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Marking and palletization must follow MIL-STD-129 and DLA packaging requirements. The delivery destination is DLA Distribution San Diego, with the same address used for freight shipping and parcel post. Inspection and acceptance occur at the destination with zero variance permitted in quantity. The contract references technical and quality standards from the DLA Master List and incorporates requirements for hazardous materials packaging and transportation as per IP025 and DLAD Proc Note C19/C20. The solicitation was issued under SPE7L1-26-T-823H with a response deadline of July 20, 2026, and an original required delivery date of February 3, 2027, though the needed ship date is set for September 3, 2026.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

SPRING, HELICAL, TORSION

Solicitation # SPE7L1-26-Q-1422

A solicitation has been issued for 12 helical torsion springs identified by NSN 5360-01-236-0286 under contract number SPE7L1-26-Q-1422, with a response deadline of August 14, 2026, and a posted date of July 31, 2026. The item falls under NAICS code 332613 and is being procured by the Department of Defense through the Land Supply Chain organization, with performance required in Greensboro, North Carolina, 27409. The delivery timeline is set for 193 days after award, and the solicitation is open to federal contracting with no set-aside restrictions specified. Primary point of contact for inquiries is Derek Roberts, reachable by phone at 614-907-3824 or email at derek.c.roberts@dla.mil, and additional details can be accessed via the official DIBBS platform.

Spring Manufacturing

POSTED

about 19 hours ago

DEADLINE

CHAIN ASSEMBLY, TIRE

Solicitation # SPE7L1-26-R-0099

The contract is for the procurement of 541 units of CHAIN ASSEMBLY, TIRE with NSN 2540-12-417-2097, requiring delivery within 120 days after delivery order issuance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and government identification must be removed from all non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited in any component or process, overriding any conflicting specification but without waiving product performance requirements; any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise stated. The solicitation was issued on July 31, 2026, with responses due by August 31, 2026, under solicitation number SPE7L1-26-R-0099, managed by the Department of Defense’s Land Supply Chain through point of contact Sarah Harmon.

Rubber Product Manufacturing for Mechanical Use

POSTED

about 19 hours ago

DEADLINE

in about 1 month

PLUG ASSEMBLY, SEALING

Solicitation # SPE7L1-26-Q-1417

The contract is for the procurement of four plug assemblies for sealing, identified by NSN 5340-01-324-8500, under solicitation SPE7L1-26-Q-1417, with a response deadline of August 7, 2026, and a required delivery within 202 days after award. The item is governed by DLA packaging and technical requirements incorporated through the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. Offerors must comply with MIL-STD-130N for identification marking of U.S. military property and source control drawing requirements; only approved sources may supply the item, and non-approved offerors must obtain OEM source approval and submit documentation with their proposal. The technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons or entities, including foreign nationals within the U.S. Compliance with DFARS 252.225-7048 is mandatory, and contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and be approved by DLA to access controlled data. Additionally, the contractor must complete a Cybersecurity Maturity Model Certification Level 2 self-assessment. All submissions must adhere to strict data handling protocols, and proprietary information must be safeguarded against unauthorized use or dissemination.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7L1-26-Q-1416

The contract pertains to the procurement of 17 units of PLUG, VENT with NSN 5340-01-288-7818 under solicitation SPE7L1-26-Q-1416, with a delivery requirement of 222 days after contract award. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Department of Commerce. Only DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and successful submission of the DLA Export-Controlled Technical Data Questionnaire may access this data. DFARS 252.225-7048 governs compliance with these restrictions, applying uniformly to U.S. companies and their foreign subsidiaries. The procurement is managed by the Department of Defense’s Land Supply Chain, with performance due at Tinker AFB, Oklahoma, and all solicitations must be submitted by August 7, 2026, following a July 31, 2026 posting. Primary point of contact is Vittorio Tambaro, reachable via email and phone provided.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE