Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Metal Fabrication and Finishing (Polished Brass & Structural Frame)

Active

Federal

Response Deadline07/30/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the fabrication of a structural frame and surface components in polished brass, specifically including sneeze guards, tray slides, and housing, all built to military-grade standards for durability and finish. The work requires precision manufacturing with attention to both structural integrity and aesthetic finish, ensuring compliance with rigorous defense specifications. All components must meet exacting performance and surface quality benchmarks typical of military applications, with no tolerance for substandard materials or workmanship. This is a total small business set-aside under the SBA program, designated for firms classified as small businesses per FAR 19.5, and falls under NAICS code 332322 for fabricated metal product manufacturing. The contract is structured as a subcontract, issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, part of the Department of Defense. Proposals must be submitted by July 30, 2026, with the solicitation posted on July 23, 2026, and performance is expected to occur at a location determined by the contractor, though no specific place of performance is listed in the data.

General Info

Small business set-aside for military-grade polished brass components under NAICS 332322, due July 30, 2026.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget SoundView Agency

NAICS

332322 - Sheet Metal Work ManufacturingView NAICS

Place of Performance

WA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 03:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication of structural frame and surface components in polished brass, including sneeze guards, tray slides, and housing, to military-grade durability and finish standards.

Similar Contracts

Same NAICS industry code

Precision Machining and Fabrication of Howitzer Carriage ComponentsThe contract requires the manufacture of high-strength, precision-machined components for howitzer carriages, aligned with military standards MIL-DTL-64159 and MIL-DTL-53039F, encompassing critical processes such as welding, heat treatment, and strict dimensional tolerancing to ensure operational reliability under combat conditions. All work must be performed to exacting specifications to meet the performance and durability demands of artillery systems, with final products subject to rigorous quality inspection and compliance verification. This is a subcontract opportunity issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at a facility in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026, with the NAICS code 332322 indicating classification under other forging and stamping operations. Interested parties must ensure full alignment with defense manufacturing requirements and be prepared to demonstrate capability in meeting stringent military specifications without deviation.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Precision Machining and Fabrication of Shroud AssemblyThe contract requires the precise manufacturing and fabrication of a shroud assembly according to engineering drawing 008299365, encompassing all stages from material selection and forming to machining and final dimensional verification. The work demands high accuracy and adherence to specified technical standards, with quality control integrated throughout each phase to ensure compliance with the engineered requirements. All components must be produced using approved methods and materials to meet performance and durability expectations for the intended application. This is a total small business set-aside subcontract under NAICS code 332322, reserved exclusively for small businesses as defined by the SBA. It is issued by the Department of Defense, specifically through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 24, 2026. The solicitation was posted on July 23, 2026, and the place of performance is not specified, indicating flexibility in location as long as deliverables meet contractual obligations. Bidders must be certified small businesses eligible under the FAR 19.5 regulations, and all submissions must align with the technical specifications outlined in the referenced engineering drawing.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

Precision Metal Fabrication of Loop ClampsThe contract seeks the manufacture of precision loop clamp hardware identified by NSN 5340-00-286-9418, requiring strict adherence to SAE AS21919D specifications and applicable military inspection standards. This is a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332322 classifying the work as other fabricated metal product manufacturing. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026, with performance obligations tied to the Department of Defense's Maritime Supply Chain. All work must be conducted in compliance with federal acquisition regulations and quality assurance protocols governing defense-related hardware.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Sheet Metal Fabrication for HVAC Duct AssembliesThe contract calls for the manufacture of precision-engineered duct assemblies designed for military heating, ventilation, and air conditioning systems, requiring strict adherence to military specifications for durability, dimensional accuracy, and functional fit. The work involves a comprehensive fabrication process including cutting, bending, forming, and welding of sheet metal components to ensure performance under demanding operational conditions. All assemblies must meet defined quality and standards requirements to support critical military infrastructure and equipment functionality. This is a subcontract opportunity under NAICS code 332322, posted on July 23, 2026, with a response deadline of August 26, 2026. The contracting entity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, and performance is expected to support defense operations without specified geographic limitation. The solicitation is issued through the DIBBS system under reference number SPE4A726R0687, and interested contractors must submit proposals by the stated deadline to be considered for award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

Welding Qualification Test Kit Manufacturing and AssemblyThe contract requires the manufacture, assembly, and quality assurance of 122 units of Welding Qualification Test Kits in full compliance with Department of Defense Logistics Agency standards, including the sourcing of all necessary components and strict adherence to approved technical specifications. All work must be performed in accordance with established quality control protocols to ensure each kit meets the required functional and durability benchmarks for military use. This is a small business set-aside subcontract under the NAICS code 332322, with a response deadline of August 3, 2026, and a performance location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting entity is the DDSP New Cumberland Facility under the Department of Defense, and the procurement is intended exclusively for small business contractors as defined by the Small Business Administration. The contract was posted on July 23, 2026, and all submissions must be completed by the specified deadline to be considered.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Precision Metal Bracket Fabrication (Angle Bracket)The contract calls for the manufacture and delivery of 179 units of an angle bracket designated by NSN 5340-01-333-8483, requiring full fabrication from material sourcing through final packaging and domestic shipping within the continental United States. All work must comply with military specifications, encompassing machining, surface finishing, labeling, and secure packaging to ensure operational readiness and traceability. The effort is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 332322 indicating classification under Other Fabricated Metal Product Manufacturing. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and the awarding entity is the Strategic Acquisition Program Directorate under the Department of Defense, though specific performance or contact details are not provided.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

DAMPER, FLUEThe contract is for the procurement of a DAMPER, FLUE with NSN 4520-01-413-0072 and part number 12364429, supplied by BAE SYSTEMS LAND & ARMAMENTS L.P. and AMZ ALABAMA INC., designated as a critical application item. The requirement is for 13 units at a unit price of $13.00, totaling $169.00, with delivery due in 130 days FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and container types, and marking must adhere to MIL-STD-129 with no special marking requirements. The delivery destination is the DLA Distribution facility in New Cumberland, PA, and transportation follows DLAD procedural notes C19 and C20. The solicitation number is SPE7L4-26-T-5744, issued under DoD procurement rules, and incorporates technical and quality requirements from the DLA Master List. The original required delivery date is May 20, 2027, with a needed ship date of July 27, 2026. The contract falls under NAICS code 332322 and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

STUD, SELF-LOCKINGThe contract pertains to the procurement of 10 units of a self-locking stud identified by NSN 5307-01-559-2772 and part number 10001334 from CONSOLIDATED METCO INC, Clackamas. Deliveries are required within five days of contract award with FOB origin terms and no variance permitted in quantity. Inspection and acceptance occur at the destination, and all items must be packaged per ASTM D3951 and labeled in strict compliance with MIL-STD-129, with palletization meeting DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards, and sampling must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unit of issue is each, and item unique identification is not required per customer request. The material is not hazardous, as confirmed by HMIC review, and no Safety Data Sheet is needed. Shipments must be sent via traceable means, excluding parcel post, to the designated government address in Goose Creek, South Carolina. All packaging and marking must reflect the supplied marking information and reference the TCN W50YF061910015. The required delivery date is July 15, 2026, with solicitation issued under contract SPE4A0-26-T-4047, governed by applicable defense acquisition regulations and technical specifications referenced through the DLA master list.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Fabrication of Aluminum Sign BlanksHillsborough County is soliciting bids for the fabrication of aluminum sign blanks that meet ASTM B-209 and Alodine 1200E specifications, requiring the material to be pre-cut, pre-punched, and chemically treated for corrosion resistance and surface preparation. The contract is structured as a subcontract with a North American Industry Classification System code of 332322, indicating it falls under the manufacturing of fabricated metal product manufacturing, specifically related to sign manufacturing. Bidders must submit responses by August 13, 2026, at 6:00 PM Eastern Time, following the solicitation posted on July 23, 2026. The work is to be performed under the jurisdiction of the Florida state agency, though specific performance location details are not provided. All submissions must comply with the referenced material standards and include complete documentation confirming adherence to the required chemical treatment and fabrication tolerances.

Hillsborough County

POSTED

DEADLINE

Supply of Sliding Door Units and HardwareThe contract calls for the manufacture and delivery of pre-assembled sliding door units that meet all applicable building codes and standards, including integrated frames, glazing, tracks, seals, and locking mechanisms. The units may be custom-sized or designed to meet energy efficiency requirements, ensuring they are tailored to specific project needs while maintaining compliance and performance. All components must be fully assembled and ready for installation upon delivery, with no on-site fabrication or modification permitted. Performance is required at Sturgeon Bay, Wisconsin, with a response deadline of August 10, 2026, and the solicitation was posted on July 23, 2026. This is a subcontract under the NAICS code 332322, which classifies it within the construction metal product manufacturing sector, and it is issued by the Department of Homeland Security through its Cleveland base office. The delivery schedule, quality controls, and compliance verification procedures are implicitly expected to align with federal procurement standards, though specific technical specifications or quantities are not detailed here.

Base CLEVELAND(00030)

POSTED

DEADLINE

Storm Shelter Fabrication and Supply

FA3029 71 Ftw Cvc

POSTED

DEADLINE

in about 1 month

Aluminum Sea Chest Kit Fabrication

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

Same awarding agency

HIGH PRESSURE AIR COMPRESSORThe U.S. Navy through the Naval Supply Systems Command Fleet Logistics Center Puget Sound is seeking a high pressure air compressor under solicitation number N0040626QS173, posted on July 24, 2026, with responses due by 5:00 PM ET on July 31, 2026. This is a combined synopsis and solicitation classified under NAICS code 336611 for Aircraft and Aircraft Parts Manufacturing, and no set-aside provisions apply, meaning it is open to all eligible businesses. The equipment is intended for performance at Sasebo, with procurement managed by the Department of Defense office located in Bremerton, Washington, 98314-5100. Primary point of contact is Taura Helms, reachable via taura.s.helms3@navy.mil, with Denise Manor as secondary contact. All details, including technical specifications and submission requirements, are contained within the attached combined synopsis, justification and approval documents, and related attachments referenced in the solicitation.

Ship Building and Repairing

POSTED

about 12 hours ago

DEADLINE

BRAND NAME OEM ALFA LAVAL INC GASKETSThe U.S. Navy’s Fleet Logistics Center Puget Sound is issuing a brand name solicitation for OEM Alfa Laval Inc gaskets critical to the operation of a vessel’s fresh water generator, designated as a ship-critical safety item under COMSCINST 4490.1C, which mandates procurement exclusively from the original equipment manufacturer or authorized sources. This requirement is non-negotiable due to safety and qualification restrictions, and the contractor must be officially qualified by the Military Sealift Command as verified through their public registry. The solicitation is a total small business set-aside under NAICS code 334513, open to all responsible sources, with submissions required to include a signed SF30 Page 1 and must respond by the deadline of July 28, 2026. The anticipated award date is August 2026, and performance will occur in San Diego, California, while the contracting office is located in Bremerton, Washington. All inquiries and submissions must be directed to Contract Specialist Vicktoria Wright at the provided Navy email address.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 12 hours ago

DEADLINE

HEATER, FLUID, INDUSTRIALThe U.S. Navy’s Fleet Logistics Center Puget Sound is soliciting a sole-source procurement for an industrial fluid heater intended for cooling system components, exclusively designated to American Industrial Heat Transfer Incorporated. While the requirement is currently non-competitive, interested parties may submit their capabilities and interest to help the government determine whether a competitive approach should be pursued. Offers will be assessed based on technical merit, delivery date, price, and past performance, with all factors considered equally significant and no single criterion prioritized. The primary evaluation criterion is the After Receipt of Order Date, which will decisively influence the selection process. The contracting action is structured as a total small business set-aside under NAICS code 332410, with quotes due by July 29, 2026, and an anticipated award date in July 2026. The procurement is managed by Contracting Officer Taura Helms, with additional support from Denise Manor, and the place of performance is designated as Sasebo.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 12 hours ago

DEADLINE

5305 FASTENERSThe Fleet Logistics Center Puget Sound is seeking quotations for specific fastener items identified by part numbers MIL-S-1222, MIL-DTL-1222, M1222N1W26C20NANN, M1222RW26C2168NCNN, and M1222RW26C288NCLN under solicitation number N0040626Q0434. This is a total small business set-aside under NAICS code 332722, meaning only small businesses are eligible to respond. All responsible small business sources are encouraged to submit bids or proposals, which will be evaluated based on technical factors including delivery date, price, and past performance, with no single factor given priority. The response deadline is August 3, 2026, and the anticipated award date is August 2026. The contracting officer is Lorraine Small, reachable at lorraine.m.small.civ@us.navy.mil, and the solicitation is managed from the office in Bremerton, Washington, under the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

Fire Hose Assembly Supply

POSTED

DEADLINE

Mobility and Caster Integration (Swivel Casters)The contract seeks the supply and installation of four heavy-duty locking swivel casters designed for rugged terrain and continuous use under demanding garrison or field conditions, with each caster rated to support a unit weight between 300 and 500 pounds. The requirement emphasizes durability, reliability, and secure locking functionality to ensure stability and controlled mobility in austere environments. This is a subcontract issued as a total small business set-aside under FAR 19.5, specifically allocated for small businesses, and classified under NAICS code 333999 for other miscellaneous manufacturing. The solicitation was posted on July 23, 2026, with proposals due by 3:00 PM EDT on July 30, 2026, and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The place of performance and point of contact details are not specified, and bids must be submitted through the official SAM.gov portal.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Refrigeration System Integration and CertificationA small business is being sought to supply and integrate a self-contained mechanical refrigeration system using R404a refrigerant designed to maintain safe food holding temperatures in field environments, operating reliably on standard 115V/60Hz/1ph power. The system must be fully self-contained, requiring no external infrastructure beyond the listed electrical input, and must be certified for operational use in demanding mobile or temporary field conditions where consistent refrigeration is critical for food safety. This contract is structured as a subcontract under a Total Small Business Set-Aside, with the North American Industry Classification System code 333415 indicating the scope involves refrigeration and air conditioning equipment manufacturing. The opportunity is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, a Department of Defense activity, with responses due by July 30, 2026, and the work is expected to support logistics and field operations requiring reliable cold chain capabilities.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Commercial Food Service Equipment ManufacturingThe contract requires the design, fabrication, and assembly of a custom portable cold buffet station for commercial food service use, featuring mechanical refrigeration with R404a refrigerant, cold wells, ice pans, tray slides, and double-sided sneeze guards. The unit must have a polished brass finish and be equipped with swivel casters for mobility, operating on standard 115V/60Hz/1ph power. All components must meet commercial food service standards for durability, sanitation, and performance under continuous operational conditions. This is a small business set-aside contract under the SBA program, classified under NAICS code 333411 for commercial food service equipment manufacturing, issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. Responses are due by July 30, 2026, with the solicitation posted on July 23, 2026. The work must be performed by a certified small business, and the equipment will be used for military food service operations, requiring strict adherence to specifications, materials, and delivery timelines.

Air Purification Equipment Manufacturing

POSTED

DEADLINE

Specialized Packaging and Crating Services

All Other Support Activities for Transportation

POSTED

DEADLINE

Material Supply – 2024-T3 Alclad Aluminum Stock

Alumina Refining

POSTED

DEADLINE

Material Supply – 4340 Steel Stock

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Aluminum Shims Fabrication (2024-T3 Alclad)

Nonferrous Forging

POSTED

DEADLINE