Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Metal Hose Assembly Fabrication and Supply

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and supply of metal hose assemblies for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing assemblies according to NSN 4720-01-575-5165 specifications, with a strict requirement that no mercury contact occurs during the process. All deliverables must be marked and packaged in accordance with MIL-STD-129, RP001, and MIL-STD-2073-1E, while maintaining full compliance with 29 CFR 1910.1200 Hazard Communication Standards. The performance of this contract will take place in New Cumberland, Pennsylvania, with completed assemblies delivered FOB Destination. The opportunity is categorized under NAICS code 332999, with a response deadline set for October 19, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-0582.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOSE ASSEMBLY, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies metal hose assemblies for prime contractors delivering DLA Weapons Support Fluid Handling Division contracts. Fabricates assemblies to NSN 4720-01-575-5165 specifications, ensuring no mercury contact. Performs packaging per RP001 and MIL-STD-2073-1E, and marking per MIL-STD-129. Complies with 29 CFR 1910.1200 Hazard Communication Standards. Delivers completed hose assemblies FOB Destination.

Similar Contracts

Same NAICS industry code

Guardrail Delineator Posts

Solicitation # 43-27

Solicitation 43-27, issued by the New Hampshire Department of Administrative Services, seeks a responsible vendor for a one-time purchase of 6,000 guardrail delineator posts. The requirement consists of 3,000 Bend Back 72-inch U-Channel Delineators and 3,000 Bend Back 84-inch U-Channel Delineators. These posts must be galvanized flanged channel section steel conforming to ASTM A 36 and AASHTO M 111, weighing 1.12 lb per foot, and featuring retroreflective sheeting that meets AASHTO M268 (ASTM D4956) Type IV minimum standards. The award will be granted to the conforming bidder offering the lowest cost, with the state reserving the right to award by individual item. Deliveries are FOB Destination to various NHDOT District locations and Turnpikes, with a maximum allowable lead time of 90 days after receipt of the purchase order. All shipments must be coordinated 48 hours in advance and must include a certificate of compliance, a certified mill test report, a detailed bill of lading, and material safety data sheets as required by the Worker's Right to Know Act. Payment terms are set at 30 days following the receipt of a proper invoice or the final inspection and acceptance of all items. Bids must be submitted via email to the Bureau of Purchase and Property by October 26, 2026, at 9:30 AM Eastern Time.

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

Supply of ISO400-F Welded BellowsThis subcontract agreement with the University of Michigan involves the manufacture and supply of one high-specification ISO400-F Welded Bellows intended for use in scientific projects. The contractor is responsible for sourcing or producing the component using specialized alloys or vacuum-grade stainless steel, ensuring the final product undergoes rigorous quality assurance testing for flexibility and vacuum integrity. To ensure technical compliance, the contractor must certify that the bellows meet ANSI, NFPA, IEEE, and IEC standards. The solicitation was posted on October 9, 2026, with a response deadline of November 6, 2026. The project falls under NAICS code 332999 and requires the delivery of one completed unit to the prime contractors.

University of Michigan

POSTED

DEADLINE

TA2 Vacuum Equipment Upgrade - ZEUS

Solicitation # RFQ-0012454-RES-2026

The University of Michigan is soliciting quotations for the TA2 Vacuum Equipment Upgrade - ZEUS, a one-time procurement of specialized vacuum chambers and components for Target Area 2. The required hardware includes ISO400-F Welded Bellows, a Deformable Mirror Vacuum Chamber, a Double Plasma Mirror Chamber, and an Interaction Chamber. Deliveries are staggered, beginning October 1, 2027, and concluding January 10, 2028. Suppliers must provide itemized pricing as single line items based on provided drawings and must certify that all equipment adheres to ANSI, NFPA, IEEE, and IEC industry standards, as well as provide UL certification where applicable. Submissions must be completed by November 6, 2026, and must include a signed RFQ Signature Page to be considered. Offerors are required to disclose any conflicts of interest with the University, provide tax identification, and identify any export-controlled items with their corresponding Export Control Classification Numbers. The University requires Original Equipment Manufacturer service and requests quotes for extended warranties and standard weekday maintenance agreements. Payment is issued via check, ACH, or wire transfer, with Net 0 terms for those in an accepted virtual card program and Net 45 terms otherwise. Timely performance is critical, with liquidated damages ranging from 10% to 30% of the total value for delays between one and three months.

University of Michigan

POSTED

DEADLINE

Bleed Air Tube Fabrication (NSN 1560-00-728-2260)This subcontract with the Department of Defense, specifically the ASC Supplier OE and AF Division, involves the fabrication of 10,000 precision bleed air tubes under NSN 1560-00-728-2260. The manufacturer must produce the tubes according to Basic Drawing NR 98897 4A95013, Rev D, and ensure bare item marking adheres to RQ017. Quality inspections are to be conducted following MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 standards. To qualify for this contract, the provider must hold CMMC Level 2 certification and JCP certification to handle export-controlled data. The solicitation was posted on October 9, 2026, with a response deadline of November 9, 2026. The work falls under NAICS code 332999 for specialized precision tube manufacturing.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-0025

Solicitation SPE4A5-27-T-0025, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is a request for quotations for the procurement of 59 units of shackles, identified by NSN 4030-01-157-7446. This commercial item procurement is managed under automated simplified acquisition procedures with a required delivery date of September 22, 2026, and a delivery window of 57 days after order. The items are to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to technical and quality requirements listed in the DLA Master List, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, with a specific prohibition on the use of mercury or mercury compounds in preservation and packaging. Offerors must submit quotes via DIBBS by October 9, 2026. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information, as well as adherence to the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

PLATE, MOUNTING

Solicitation # SPE7L1-26-T-08N8

This contract is for the procurement of one mounting plate, identified by NSN 2510-01-725-9541 and part number 0031040708-213 from Macartney Inc. The order is issued by the Department of Defense Land Supply Chain with a required delivery date of September 3, 2026, and a delivery timeframe of 20 days after order. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination in Port Hueneme, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding packaging standards ASTM D3951 and MIL-STD-129, as well as the removal of government identification from non-accepted supplies. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals in the delivered items. All shipments must be sent via the fastest traceable means to the specified address at NBVC Port Hueneme.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-5755

Solicitation SPE8E8-26-T-5755 is a fixed-price request for quotation issued by the Defense Logistics Agency Troop Support for the procurement of one End Plate, identified by NSN 4630011200494. This critical application item is designed for use with Air Master Products Corp Sewage Comminutor Model No. AMS5600 and Poseidon Submarine Air Pack Products Corp equipment. The requirement is an Foreign Military Sales procurement for Taiwan, with a required delivery date of July 16, 2025, and a delivery timeline of five days after order. Inspection and acceptance are both designated at the point of origin. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking compliant with MIL-STD-129. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Notable material restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding the Buy American and Balance of Payments Program, safeguarding covered defense information, and representations concerning telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-26-T-452Q

Solicitation SPE7M4-26-T-452Q is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of six nonmetallic hose assemblies, identified by NSN 4720-01-515-4246. The contract requires delivery within 150 days after receipt of order, with shipping terms set as FOB Origin and delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination per FAR 52.246-2. The procurement falls under NAICS code 332999 and is managed through the First Destination Transportation program to optimize shipping costs. This requirement involves significant security and technical constraints, as the technical data contains Unclassified Navy Nuclear Propulsion Information (U-NNPI/NOFORN) and is subject to ITAR or EAR export controls. Consequently, vendors must submit non-disclosure agreements and certification forms to access technical data and must be approved by the DLA controlling authority. Compliance requirements include CMMC Level 2 certification, adherence to the Buy American Act, and strict prohibitions against the use of Class I ozone-depleting chemicals and intentionally added mercury. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and all payment processing must be conducted via the Wide Area WorkFlow system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

BOX, ACCESSORIES STOWAG

Solicitation # SPE7L3-26-U-0780

Solicitation SPE7L3-26-U-0780 is a request for quotations issued by DLA Land and Maritime for the procurement of Accessories Stowage Boxes, identified by NSN 2540200042501 and Part Number 112076901 from G.T. Machining & Fabricating Ltd. The requirement is for an estimated annual quantity of 56 units under a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars. Delivery is required within 80 days, with inspection and acceptance occurring at the destination. While there is conflicting data regarding shipping, the schedule specifies FOB Origin. The contract mandates strict adherence to DLA packaging and marking standards, specifically RP001 and MIL-STD-129, with DLA Master List requirements taking precedence over ASTM D3951. Hazardous materials must be handled according to FED-STD-313 and TQ requirement IP025. Offerors must comply with domestic sourcing restrictions, including the Buy American Act and the Berry Amendment. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Award will be based on the price quoted for the estimated annual demand to a determined responsible offeror.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-482J

Solicitation SPE4A5-26-T-482J, issued by the DLA Aviation ASC Supplier Oper OEM Division, is a request for quotes for eight zinc-coated anchor steel shackles, NSN 4030003435433. The items must be manufactured as a critical application item using a forging process in accordance with the Federal Specification for Chains and Attachments, Welded and Weldless, specifically Type IVA, Grade A, Class 3, with a 3/4 inch diameter shackle stock. Delivery is required by September 22, 2026, with a delivery window of 101 days after order, shipped FOB Origin to DLA Distribution Cherry Point in North Carolina. The contract mandates strict quality and safety compliance, including a prohibition on the intentional addition of mercury or mercury-containing compounds. Manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001, and sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging and marking must adhere to MIL-STD-129 and RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, sustainable products, and the Buy American Act.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Culvert Bands and Gaskets SupplierThis subcontract opportunity is for a supplier to provide pipe bands and gaskets to prime contractors working on culvert projects for the St. Johns River Water Management District in Florida. The scope of work specifically requires the delivery of 24-inch bands with gaskets and all necessary hardware that is compatible with corrugated aluminum pipe meeting FDOT Section 945 compliance. The selected supplier will be responsible for delivering the total quantity of bands and gaskets required for the project. The solicitation was posted on October 9, 2026, with a response deadline of October 27, 2026. This procurement falls under NAICS code 332999 and is managed through the Florida vendor marketplace. Interested parties must ensure all provided materials meet the strict technical specifications required for the district's infrastructure projects.

St. Johns River Water Management Dist

POSTED

DEADLINE

Certified Special Emphasis Material SupplyThis subcontract for Certified Special Emphasis Material Supply supports prime contractors working on Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work involves the provision of certified raw metals, specifically mercury-free QQ-N-281 Nickel Alloy and ASTM-B150 Alloy C63200. To ensure quality and regulatory adherence, the contract mandates full heat and lot traceability along with the submission of Certificates of Compliance. All delivered raw material stock must be accompanied by detailed chemical and mechanical analysis reports. The response deadline for this opportunity is November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

HOSE, AIR BREATHING

Solicitation # SPE7M4-27-T-0591

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-27-Q-0039

POSTED

DEADLINE

Solicitation # SPE7M4-27-Q-0040

Solicitation SPE7M4-27-Q-0040 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 10 units of Shaft, Subassy (NSN 1420-00-961-5009), corresponding to Eaton Aerospace LLC part number 257733. This procurement is designated as a total small business set-aside under NAICS code 336413. The required delivery date is 300 days after order award, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. The contractor must adhere to strict technical and quality standards, including packaging per ASTM D3951 and palletization according to RP001, with all DLA Master List requirements taking precedence. Marking and labeling must comply with MIL-STD-129. Key compliance mandates include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to various DFARS and FAR clauses regarding cybersecurity, foreign entity restrictions, and small business subcontracting. Invoicing and receiving reports are to be processed electronically via the Wide Area Workflow system. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Freight Services

Freight Transportation Arrangement

POSTED

DEADLINE

Nonmetallic Hose Assembly Production (NSN 4720-01-520-3644)

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Magnetic Machine Thread Plugs (NSN 5365002033914)This subcontract involves the manufacture and supply of 22,000 precision-machined magnetic machine thread plugs for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for producing or sourcing plugs that strictly adhere to Part Number A722 and NSN 5365002033914, utilizing specialized precision machining equipment to ensure exact thread accuracy. All delivered units must be marked according to MIL-STD-129 and packaged in compliance with ASTM D3951 standards. The performance of this contract is centered at Hill AFB, with a response deadline set for October 19, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Aerospace Coating and Non-Destructive Testing (NDT)

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Aerospace Grade Tubing and Fitting Supply

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Nacelle Tube Assembly Manufacturing

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Copper Alloy Pipe NipplesThis subcontract involves the supply of 40 copper alloy pipe nipples, identified by NSN 4730-00-196-2021, for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing these components to ensure they meet the ASTM specifications for brass, copper, and chromium-plated pipe nipples, as well as the DLA Master List of Technical and Quality Requirements RA001. The project is categorized under NAICS code 332999 and requires delivery FOB Origin to Tracy, zip code 95304-5000. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

MIL-STD-129 Packaging and Labeling Services

Motor Vehicle Towing

POSTED

DEADLINE

Fabrication of Drip Pans (NSN 4940014196444)

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS