Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Metal Sheet Supply (NSN 9535-00-684-1439)

Active

Federal

Response Deadline07/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of flat-rolled metal sheets identified by NSN 9535-00-684-1439, manufactured to meet federal specifications with full compliance in material quality, dimensional accuracy, and finish standards. Each shipment must include comprehensive labeling and traceability documentation to ensure end-to-end accountability, including batch records, material certifications, and inspection reports aligned with defense procurement requirements. The product is intended for use in military maintenance, repair, and overhaul operations under the oversight of the Department of Defense. Issued as a subcontract under NAICS code 331221, the solicitation was posted on July 16, 2026, with responses due by July 23, 2026. The contracting activity falls under the Construction & Equipment MRO Service I office, and the performance location is not specified, implying delivery may be directed to various DoD facilities as needed. All bids must adhere strictly to technical and administrative requirements outlined in federal specifications, and failure to provide complete traceability or non-compliant materials will result in rejection. The official solicitation portal is accessible via the provided DIBBS link for detailed submission guidelines.

General Info

Supply of compliant flat-rolled metal sheets for DoD MRO with full traceability and documentation required.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 23

Submission deadline

Response Deadline

07/23/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of flat-rolled metal sheets per NSN 9535-00-684-1439, meeting federal specifications with proper labeling and traceability documentation.

Similar Contracts

Same NAICS industry code

Structural Steel Angle Supply

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Raw Materials and ForgingsThe contract seeks the supply of certified high-strength steel or alloy billets specifically engineered for defense-grade piston pin production, requiring materials to meet stringent military performance and quality standards. This subcontract is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, ensuring procurement opportunities are reserved for qualifying veteran-owned enterprises. The NAICS code 331221 indicates the focus on forging and stamping operations, underscoring the need for precision manufacturing capabilities in the production of billets destined for critical defense components. Performance is mandated to occur at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all submissions must be received by the deadline of July 27, 2026. The contract falls under the purview of the Department of Defense through its Land Supplier Operations Engines division, emphasizing its importance to national defense supply chain integrity.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Raw Material Supply (Metal Tubing Stock)The contract is for the supply of raw metal tubing in precise dimensions and certified material grades to be used in the fabrication of a final defense assembly, with performance required at NEW CUMBERLAND, zip 17070-5002. The solicitation falls under the NAICS code 331221, indicating manufacturing of nonferrous rolled and drawn metal shapes, and is classified as a subcontract within the Department of Defense’s Fluid Handling Division. The opportunity was posted on July 16, 2026, with responses due by July 31, 2026, and is open to qualified suppliers capable of meeting stringent quality and specification requirements for defense applications. Delivery and compliance must align with defense-grade standards, though specific technical details such as tolerances, alloy composition, and testing protocols are not detailed here. The contract is not subject to any set-aside designation, allowing full and open competition among eligible vendors.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hot-Rolled Steel Bar Manufacturing and SupplyThe contract calls for the manufacture and supply of hot-rolled steel bars meeting strict military specifications, including ASTM A575-96 and SAE AMS2806, with exact dimensional tolerances and mandatory unit marking requirements to ensure traceability and compliance. All materials must be produced to precise standards suitable for defense applications, with quality control protocols in place to verify conformity throughout the production process. The product is intended for performance in high-stress environments, necessitating rigorous adherence to chemical composition, mechanical properties, and surface finish criteria outlined in the referenced standards. The solicitation is a subcontract opportunity issued by the DLA Dist San Joaquin under the Department of Defense, with a response deadline of July 24, 2026, and a place of performance identified as Tracy, California, 95304-5000. The NAICS code 331221 indicates this falls under the forging and stamping industry classification, emphasizing the need for specialized metalworking capabilities. Although no set-aside type is specified, bidders must be prepared to demonstrate capacity to meet military-grade manufacturing demands, including certification, documentation, and delivery timelines aligned with defense supply chain requirements. The contract is accessible via the DIBBS platform for detailed submission guidelines and technical requirements.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Structural Steel Plates (Ordinary Strength, Hot Rolled, Sheared Edge)The contract requires the manufacture and supply of two structural steel plates compliant with MIL-S-22698C and ABS standards, specifically designated as ordinary strength, hot rolled, and featuring sheared edges. Each plate must undergo either normalized or controlled rolling heat treatment to ensure desired mechanical properties and structural integrity. Certification by an ABS Surveyor is mandatory, confirming adherence to all technical and quality requirements and serving as official verification of compliance. The materials are intended for defense-related applications under the oversight of the Department of Defense through the Defense Logistics Agency. The solicitation, posted on July 16, 2026, with a response deadline of July 20, 2026, is classified as a subcontract under NAICS code 331221, indicating its placement within the primary metal manufacturing sector. While no set-aside type is specified, the procurement is managed by the Defense Logistics Agency and does not list a specific place of performance or point of contact. Interested parties must submit bids through the official DIBBS platform before the deadline to be considered for award, with all deliverables expected to meet the stringent military and maritime regulatory frameworks outlined in the specifications.

Defense Logistics Agency

POSTED

DEADLINE

Cold-Rolled, Annealed Steel Sheet SupplyThe contract requires the supply of 13 sheets of cold-rolled, annealed, corrosion-resistant steel conforming to the SAE AMS5528K specification, ensuring high material integrity and performance under demanding conditions. Each sheet must undergo solution heat treatment and be delivered in whole-foot lengths to meet exact dimensional requirements. The material must demonstrate consistent corrosion resistance and mechanical properties aligned with aerospace and defense industry standards, with full quality certification provided to verify compliance. Performance is to be fulfilled at Tinker Air Force Base, Oklahoma, with a delivery deadline of July 24, 2026, and the solicitation was posted on July 16, 2026. This subcontract falls under NAICS code 331221, indicating it is tied to the manufacturing of rolled metal products. The contracting entity is the Department of Defense through the Depot Oklahoma office, and the procurement is part of a broader effort to source critical materials for defense infrastructure and maintenance operations.

POSTED

DEADLINE

Cobalt Alloy Metal Sheet SupplyThe contract calls for the supply of one sheet of cobalt alloy meeting SAE AMS5537KK Rev K and additional military specifications, characterized by its corrosion and heat resistance. The material must be cold or hot rolled and solution heat treated, with precise dimensions of 0.032 inches in thickness, 48 inches in width, and 96 inches in length, weighing approximately 42.18 pounds per sheet. The alloy is intended for high-performance applications where durability under extreme thermal and corrosive conditions is critical. Performance and compliance with the stated military standards are mandatory for acceptance. The solicitation is classified as a subcontract under NAICS code 331221, issued by the Defense Logistics Agency under the Department of Defense. It was posted on July 16, 2026, with a response deadline of July 27, 2026. The place of performance is specified as Hill Air Force Base, Utah, with a ZIP code of 84056-5703. While no point of contact is listed in the provided data, responses must be submitted through the designated DIBBS platform, and suppliers are expected to ensure full compliance with all technical and administrative requirements tied to the military specification.

Defense Logistics Agency

POSTED

DEADLINE

Domestic Steel Fabrication and SupplyThe contract encompasses the supply of domestic steel stock and precision fabrication services for angle arm components, manufactured to meet strict military specifications. Work includes cutting, bending, and finishing operations, ensuring all components adhere to required technical and quality standards for defense applications. The fabrication must be performed using steel sourced domestically to comply with relevant sourcing regulations and support national security objectives. Issued by the Defense Logistics Agency under the Department of Defense, this is a subcontract opportunity with a NAICS code of 331221, indicating focus on steel product manufacturing from purchased steel. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026. The place of performance and point of contact details are not specified, but all work must fulfill the military compliance criteria outlined in the specifications. Interested parties must submit proposals through the provided DIBBS portal before the deadline.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Corrosion-Resistant Cold-Rolled Steel Sheets for Defense ApplicationFifteen sheets of cold-rolled, corrosion-resistant steel conforming to COMP 301 with a 2B bright finish are to be supplied under a subcontract awarded by the Department of Defense through the Warner Robbins office, for use in defense applications. The contract mandates strict adherence to material specifications, including traceability standards and packaging requirements to ensure integrity and compliance throughout the supply chain. All items must be delivered no later than 30 days after contract award, with no tolerance for delays. The solicitation closed on July 20, 2026, and the work falls under NAICS code 331221, indicating classification within the rolled steel product manufacturing sector. The deliverables are intended for DLA Distribution, requiring full compliance with federal defense procurement protocols.

POSTED

DEADLINE

BAR, METALThis contract specifies the procurement of hot-rolled steel bars, metal, with a thickness of 0.250 inches, a width of 6.000 inches, and a length between 18 and 20 feet, with a reference weight of 5.100 pounds per foot. The material must conform to ASTM A575-96 and SAE AMS2806 standards, and full compliance with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements is mandatory. Each unit must be marked with continuous identification including the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s heat and lot number, and dimensions, using only stamping or stenciling methods that are legible, waterproof, and non-contaminating. Adhesive labels are required for thin bars under 0.250 inches nominal OD, and all packaging must follow MIL-STD-2073-1E and ASTM A700 for preservation and packing, with marking in accordance with MIL-STD-129. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96, and any offer based on non-QSLD-sourced material constitutes a deviation and may be grounds for rejection or criminal penalties. A Certificate of Quality Compliance, or mill certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. The product is subject to destination inspection and acceptance, with a firm fixed price and a 10% quantity variance allowance. Delivery is required within 120 days after award, with shipment addressed to DLA Dist San Joaquin in Tracy, California. The order quantity is 31 feet, and the material must be supplied only in whole-foot lengths. All documentation, including CDRL-METALSCERT and DD Form 1423, must be provided as specified, and the government waives source inspection requirements for qualified QSLD suppliers under this procurement.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

BAR, METALThe contract specifies the procurement of cold-drawn, annealed steel hexagonal bars made from E4340 alloy, measuring 0.750 inches across flats and ranging in length from 10 to 12 feet in whole-foot increments only, with a reference weight of 1.656 pounds per foot. The material must conform to SAE AMS6484F and other referenced technical standards, and is subject to strict quality and certification requirements including a required Certificate of Quality Compliance for every shipment, which must be delivered to the customer and forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit, including the contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, using only approved methods such as stamping or stenciling that ensure legibility, durability, and non-contamination. Adhesive labels are permitted for smaller diameter bars. Compliance with DLA packaging standards MIL-STD-2073-1E and ASTM A700 is required, including special marking codes ZZ and Z, and all packaging must adhere to MIL-STD-129 with additional unit-of-measure markings where applicable. Only qualified suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from this requirement must be explicitly declared; failure to comply may result in rejection or criminal penalties for unauthorized substitutions. Government-inspection requirements are waived for qualified suppliers under the QSL program, but the Certificate of Quality Compliance remains mandatory. The total quantity required is 233 feet, delivered under a firm fixed-price contract with a 10% variance allowance, to be shipped FOB origin and inspected/accepted at destination within 80 days of the award date. Packaging must meet specific DLA guidelines, and shipment must be sent to the designated receiving warehouse in Tracy, California. The material is designated as potentially containing defense information, and all documentation, including Technical Data Packages and CDRLs, must be reviewed to ensure full compliance with technical, quality, and administrative stipulations.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

SHEET, METALThis contract specifies the procurement of 13 sheets of cold-rolled, annealed steel meeting specification SAE AMS5528K, with a thickness of 0.016 inches, width of 36 inches, and length of 120 inches, weighing approximately 20.04 pounds per sheet. The material is corrosion resistant and solution heat treated, and must be supplied in whole-foot lengths only, with no test coupons permitted. All sheets must strictly conform to dimensional requirements, and continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions. Markings must be applied via stamping or stenciling using waterproof, non-contaminating fluids and must remain legible after normal handling; adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches in nominal OD. Packaging must comply with MIL-STD-2073-1E and ASTM A700 for preservation and packing, with marking adhering to MIL-STD-129 and incorporating both units of measure when applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly disclosed. Compliance with the QSL program is mandatory, and failure to meet these criteria constitutes an unauthorized substitution with potential criminal and civil penalties. A Certificate of Quality Compliance, including mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Inspection and acceptance occur at the destination, with firm fixed pricing and zero variance allowed on quantity. Delivery is required within 50 days after award, with shipments directed to Tinker AFB, Oklahoma. The contract incorporates technical and quality requirements from the DLA Master List and applies CDRL-METALSCERT-26033, which mandates material certification documentation. All packaging, marking, and shipping must meet the specifications outlined in RP001, IP083, and related standards.

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Unable to Retrieve Contract DataThe contract opportunity is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation number SPE8E926Q0586 and a posting date of July 17, 2026. Responses are due by July 24, 2026, but critical details such as the contract scope, CLINs, NAICS code, place of performance, and point of contact are unavailable, preventing full decomposition or assessment of requirements. The system encountered repeated gateway timeout errors when attempting to retrieve prime contract data, leaving insufficient metadata to identify specific deliverables, funding, or performance locations. The solicitation is accessible via a DIBBS link, though no set-aside information, agency office address, or contact details are provided, limiting the ability to determine eligibility or pursue responsive actions.

POSTED

about 15 hours ago

DEADLINE

Supply of Solid Rubber Sheet (NSN: 9320-00-618-2405)The contract requires the supply of one unit of a commercial off-the-shelf solid rubber sheet that meets federal National Stock Number specifications NSN 9320-00-618-2405, with all necessary packaging, marking, and handling protocols for hazardous materials if applicable. The item falls under NAICS code 326220 and is procured through a subcontract mechanism under the Department of Defense’s Construction & Equipment MRO SVC I agency. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, and the place of performance and point of contact details are not specified. The procurement is conducted via the DIBBS system, and all deliverables must conform strictly to the NSN standard without deviation.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 15 hours ago

DEADLINE

Technical Data and Compliance Documentation SupportThe contract requires the preparation and submission of comprehensive technical documentation to support compliance with specified requirements, including detailed compliance reports, material safety data sheets (MSDS), and proper product labeling. All deliverables must align with the outlined standards to ensure regulatory adherence and operational readiness. The work falls under the NAICS code 541690, indicating it is a technical and scientific consulting service, and is structured as a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, giving potential bidders a one-week window to submit proposals. No set-aside provisions are designated, meaning the opportunity is open to all eligible contractors. The place of performance and point of contact details are unspecified, and all submissions must be made through the official DIBBS platform using the provided RFQ link. Timely and accurate documentation is critical, as failure to meet compliance standards could result in rejection or contract non-performance.

Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

Packaging and Marking Services for Military ShipmentThe contract requires the provision of packaging and marking services for military shipment of electric lanterns, fully compliant with MIL-STD-2073-1E and MIL-STD-129 standards to ensure proper handling, storage, and identification throughout the defense supply chain. These specifications dictate precise methods for material selection, protective wrapping, labeling, and documentation to meet stringent Department of Defense requirements for readiness and logistics efficiency. The work is classified as a subcontract under NAICS code 561990, indicating it falls under other support services, and is issued under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I within the Department of Defense. All performance must align with federal standards for military logistics, without deviation from the mandated technical directives. The solicitation was posted on July 17, 2026, with a firm deadline for responses on July 24, 2026, leaving a one-week window for qualified vendors to submit proposals. The place of performance and specific delivery locations are not detailed, but the work is inherently tied to government shipment logistics, implying potential deployment to various domestic or international military sites. The contract is accessed through the DIBBS procurement portal, and while no point of contact or set-aside status is provided, interested parties must adhere strictly to the technical specs and timelines outlined in the official request to be considered for award.

All Other Support Services

POSTED

about 15 hours ago

DEADLINE

Electric Lantern Manufacturing and SupplyThe contract requires the manufacture and delivery of 107 electric lanterns that meet the military specification MIL-DTL-16377/53E, with the specific part number M16377/53-100.2L(W). These lanterns must be produced to exactly match the technical and quality standards defined in the military specification to ensure compatibility and reliability in operational environments. The work falls under NAICS code 335110, indicating it is categorized under electromagnetic and electronic equipment manufacturing, and is structured as a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, allowing suppliers a narrow window to submit proposals. The place of performance and point of contact details are unspecified, but the contract is administered through the Defense Logistics Agency’s DIBBS system, with the official solicitation available via the provided link. All deliverables must be completed in full compliance with the military standard, and successful bidders will be expected to meet all contractual requirements without deviation, as noncompliance will result in rejection or termination.

Electric Lamp Bulb and Part Manufacturing

POSTED

about 15 hours ago

DEADLINE

Packaging and Marking ComplianceThe contract requires full compliance with MIL-STD-129 standards for the packaging, preservation, and marking of electric lanterns intended for shipment, ensuring all unit and container labels meet exact military specifications for identification, handling, and traceability. This includes proper labeling procedures, material preservation techniques to prevent damage during transit and storage, and coordination of handling logistics to maintain integrity throughout the supply chain. The work is structured as a subcontract under the NAICS code 561910, tied to the Department of Defense’s Construction & Equipment MRO SVC I agency, with responses due by July 24, 2026, and the solicitation posted on July 17, 2026. All activities must align strictly with military packaging protocols without deviation to ensure seamless integration into defense logistics systems.

Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract requires independent environmental, performance, and durability testing of five electric lantern units to meet the exacting standards outlined in Table II of MIL-F-16377/53C, with an absolute requirement of zero non-conformances across all test parameters. This first article testing (FAT) is a critical quality assurance step to validate that the lantern units fully comply with military specifications before any production or procurement proceeds. Testing must be conducted by a qualified third party and result in formal, detailed reporting that documents all procedures, conditions, measurements, and outcomes to demonstrate adherence to the standard. The solicitation is issued under the NAICS code 541380 for other scientific and technical consulting services and is structured as a subcontract within the Department of Defense’s Construction & Equipment MRO Svc I framework. Proposals must be submitted by July 24, 2026, with the opportunity posted on July 17, 2026, leaving a narrow seven-day window for qualified vendors to respond. There is no specified set-aside type, meaning any eligible entity may bid, and the place of performance is not defined, suggesting testing may occur at the contractor’s accredited facility. The deliverable is not just completion of tests but a comprehensive, auditable formal report that conclusively proves zero deviations from requirements.

Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

Electric Lantern Manufacturing and SupplyThe contract calls for the manufacture and supply of fifty-five electric lanterns identified by NSN 6230-01-580-6495, must fully conform to the military specifications MIL-DTL-16377/53E and MIL-DTL-16377K SUP 1, encompassing all stages of production, rigorous testing, proper packaging, and timely delivery. The work is structured as a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I, with the NAICS code 335110 indicating classification within the electrical equipment manufacturing sector. All deliverables must meet stringent defense standards to ensure operational reliability and durability under field conditions. The solicitation was posted on July 17, 2026, with responses due by July 24, 2026, leaving a one-week window for interested parties to submit proposals. The place of performance and organizational details are not specified in the provided data, but the contract is accessible via the DIBBS platform for further details. There is no set-aside designation indicated, meaning the opportunity is open to all qualified vendors without restriction based on business size or ownership type. The requirement emphasizes full compliance with technical specifications, quality assurance procedures, and delivery timelines critical to military logistics and readiness.

Electric Lamp Bulb and Part Manufacturing

POSTED

about 15 hours ago

DEADLINE

Logistics and Distribution SupportThe contract titled Logistics and Distribution Support requires coordination of shipments and receiving reporting through the Web–Based Application for Workflow (WAWF) to ensure timely and accurate delivery to Defense Logistics Agency distribution points. Compliance with proper marking standards and regulatory requirements is mandatory to facilitate seamless receipt and inventory management by DLA. This subcontract is part of a broader Department of Defense initiative under NAICS code 493190, focusing on support services related to logistics and distribution operations. The opportunity was posted on July 17, 2026, with a response deadline of July 24, 2026, and is solicited under the Construction & Equipment MRO SVC I agency framework. All performance activities are tied to DLA distribution points, and contractors must operate within strict compliance guidelines to ensure documentation, labeling, and reporting meet federal and defense logistics standards. The solicitation number is SPE8E926Q0588, and interested parties must utilize the provided DIBBS link for access to full submission details and requirements.

Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2 Self-Assessment)The contract requires the performance and documentation of a CMMC Level 2 self-assessment to ensure compliance with cybersecurity standards for protecting Covered Defense Information. This effort is mandatory under the terms of the subcontract and must be completed in accordance with the Cybersecurity Maturity Model Certification framework to meet Department of Defense requirements. The work is tied to NAICS code 541611, indicating it involves administrative management and general management consulting services, and is issued under the agency name Construction & Equipment MRO SVC I, which operates under the Department of Defense. The solicitation was posted on July 17, 2026, with a firm deadline for response on July 24, 2026, and the place of performance is not specified, implying flexibility in execution location as long as all compliance obligations are fulfilled. The task centers exclusively on internal assessment and documentation, not external audits or third-party validations, and participation is contingent on timely submission and accurate recordkeeping to demonstrate adherence to the CMMC Level 2 controls.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Technical Documentation and Design Compliance ServicesThis contract requires the provision of technical documentation and design compliance services to ensure all product designs and associated documentation meet military specifications and referenced drawings. The work is critical to maintaining standards for defense-related equipment, requiring precise adherence to regulatory and technical requirements outlined by the Department of Defense. The contractor must deliver accurate, complete, and vetted documentation that aligns with established military standards to support procurement, maintenance, and operational readiness. The contract is classified as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I. Offers must be submitted by the response deadline of July 24, 2026, with the solicitation posted on July 17, 2026. The place of performance and point of contact details are not specified, and no set-aside preferences are indicated, meaning the opportunity is open to all qualified subcontractors regardless of business size or status. Interested parties must access the full solicitation through the provided DIBBS link to review detailed requirements and submission instructions.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Fibrous Cord Supply (Part Number 4020-01-273-0085)The contract is for the supply of fibrous cord identified by part number 4020-01-273-0085, with quantities specified per contract line item numbers. The product must comply with all applicable military packaging and labeling standards to ensure compatibility with defense logistics and distribution systems. This is a subcontract under the NAICS code 326199, which corresponds to other rubber product manufacturing, and is managed by the Department of Defense through the Construction & Equipment MRO SVC I organization. The solicitation was posted on July 17, 2026, with responses due by July 24, 2026, indicating a short window for proposal submission. The place of performance and point of contact details are not provided, but the contract is accessible via the DIBBS system under solicitation number SPE8E926Q0588 for further procurement information.

All Other Plastics Product Manufacturing

POSTED

about 15 hours ago

DEADLINE